Assessment of a Biosafety Device to Control Contamination by Airborne Transmission during Orthodontic/Dental Procedures.

During the COVID-19 pandemic, dental professionals have faced high risk of airborne contamination between dentists, staff, and patients. The objective of this study was to evaluate the effect of an individual biosafety capsule in dentistry (IBCD) on reducing the dispersion of droplets and aerosols during orthodontic treatment and evaluate the clinician and patient's perception of using the IBCD. For the in-vitro part of the study, aerosol quantification was performed with and without the IBCD, using a nonpathogenic bacterial strain and viral strain in the reservoir and high-speed dental handpiece. Petri dishes with MRS agar were positioned from the head of the equipment at distances of 0.5, 1, and 1.5 m. After 15 minutes of passive aerosol sampling, the dishes were closed and incubated using standard aerobic conditions at 37°C for 48 hours to count colony forming units (CFUs). For the clinical part of the study, a questionnaire was sent to clinicians and patients to understand their perception of orthodontically treat and receive treatment using the barrier. The use of IBCD showed an effective means to reduce the dispersion of bacterial and viral contamination around 99% and 96%, respectively, around the main source of aerosol (p < 0.05). Clinical results showed a 97% bacterial reduction during patient's consultations (p < 0.05). The vast majority of clinicians and patients understand the importance of controlling the airborne dispersion to avoid contamination.

Análise da deformação e caracterização de mini-implantes utilizados no MARPE (miniscrew-assisted rapid palatal expander) / Analysis of deformation and characterization of miniscrews used in MARPE (miniscrew-assisted rapid palatal expander)

O objetivo deste trabalho foi analisar e caracterizar alterações estruturais e/ou deformações dos mini-implantes utilizados como ancoragem no disjuntor tipo MARPE (do inglês, Miniscrew-Assisted Rapid Palatal Expander). A amostra consistiu de quarenta e quatro mini-implantes (Peclab, Belo Horizonte/MG/Brasil) ­ comprimento: 7mm, pescoço: 4mm e diâmetro: 1,8mm) usados como ancoragem no disjuntor tipo MARPE em pacientes com constrição maxilar necessitando de tratamento para expansão rápida da maxila. Os mini-implantes analisados permaneceram em um período estimado de quatro meses na boca. Além disso, outros quatro mini-implantes novos e não usados fabricados pela mesma empresa foram usados como grupo controle. A análise e caracterização da deformação morfológica foram realizadas utilizando microscopia eletrônica de varredura (MEV) e espectroscopia de energia dispersiva de raios-X (EDS). Em relação à caracterização dos mini-implantes no segmento pescoço, encontrou-se uma composição média de titânio 85,99%, alumínio 5,48%, vanádio 1,72%, carbono 4,74%, cromo 0,15%, oxigênio 1,82%, Na região do terço médio, foram encontrados: titânio 82,37%, alumínio 5,33%, vanádio 1,89%, carbono 6,97%, cromo 0,11%, oxigênio 3,13%, enxofre 0,02%, ferro 0,08% e molibdênio 0,02%. Quando avaliada a deformação, segundo método proposto por Fujii (2013) variando do escore 0 (mínimo) à classificação 4 (máximo), foram observados os seguintes resultados: terço médio 1,70, ponta 1,56, cabeça 1,40 e pescoço 1,00. Nenhuma das amostras apresentou deformação ao longo do eixo dos mini-implantes. Um grande número de elementos na composição da liga foi detectado e as principais deformações foram de amassamento e edentação, principalmente, observados nos segmentos do terço médio e da ponta. (AU)

The aim of this work was to analyze and characterize structural changes and/or deformation of miniscrews used as anchorage for Miniscrew-Assisted Rapid Palatal Expander (MARPE). The sample consisted of forty-four miniscrews (Peclab, Belo Horizonte/MG/Brazil), length: 7mm, neck: 4mm and diameter: 1.8mm used as MARPE anchorage in patients with maxillary con- striction requiring rapid maxillary expansion treatment. The miniscrews analyzed remained an estimated period of four months in mouth. In addition, other four new and unused miniscrews manufactured by the same company were used as control group. Morphologic deformation analysis and characterization were performed using scanning electron microscopy (SEM) and energy dispersive X-Ray spectroscopy (EDS). Regarding miniscrews characterization at the neck segment, it was found an average composition of titanium 85.99%, aluminum 5.48%, vanadium 1.72%, carbon 4.74%, chrome 0.15%, oxygen 1.82%. In the middle third region it was found: titanium 82.37%, aluminum 5.33%, vanadium 1.89%, carbon 6.97%, chromium 0.11%, oxygen 3.13%, sulfur 0.02%, iron 0.08% and molybdenum 0.02%. When deformation was assessed, according to the method proposed by Fujii (2013) ranging from score 0 (minimum) to 4 (maximum), the following results were observed: middle third 1.70, tip 1.56, head 1.40 and neck 1.00. None of the samples showed deformation along the miniscrews axis. A large number of elements in the alloy composition were detected and the major deformations were mainly kneading and edentation, observed at the middle third and tip segments. Descriptors: Palatal expansion technique, orthodontic anchorage procedures, malocclusion.(AU)

Aligner Tubes ­ uma nova opção para a correção ortodôntica sem a utilização de bráquetes / Aligner Tubes ­ a new option for orthodontic correction without the use of brackets

Resumo O número de pacientes adultos que buscam o tratamento ortodôntico tem aumentado e essa mudança no cenário da Ortodontia tem exigido dos profissionais o emprego de aparelhos estéticos que proporcionem a correção das más oclusões por meio de abordagens simplificadas, eficientes e de maior conforto. Assim sendo, este artigo tem como objetivo apresentar uma técnica alternativa que pode ser empregada pelos profissionais na correção de más oclusões simples e na resolução de recidivas de apinhamento dentário na região anterior do arco. O artigo descreve a confecção passo a passo do sistema Aligner Tubes que é constituído por tubos metálicos colados às faces vestibulares dos elementos dentários anteriores e na sequência ilustra a aplicabilidade desse método com a exemplificação de relato de um caso clínico. Conclui-se que é um sistema simplificado, estético e de baixo custo que possibilita a correção dos problemas simples, em tempo relativamente curto e com resultados satisfatórios.(AU)

Abstract The number of adult patients searching for orthodontic treatment has increased and this change in the Orthodontic routine has required from professionals the use of aesthetic devices that provide malocclusions correction through simplified, efficient, and more comfortable approaches. Therefore, this article aims to present an alternative technique that can be used by professionals in the correction of minor malocclusions and in the resolution of dental crowding recurrences in the anterior region of the arch. This article describes the step-by-step preparation of the Aligner Tubes system, which consists of metallic tubes bonded to the buccal surfaces of the anterior teeth and then illustrates the applicability of this method with one clinical case report example. It is concluded that it is a simplified, aesthetic, and low cost system that allows the correction of simple problems in a relatively short time and with satisfactory results.(AU)

Evaluation of the cephalometric centroid point in individuals before and after the pubertal growth peak / Avaliação do comportamento do ponto cefalométrico centróide em pacientes antes e após o pico de crescimento da puberdade

ABSTRACT Objective: The purpose of this study was to evaluate the behavior of the Centroid point, known as the geometric center of the face, before and after the growth peak using lateral cephalometric x-ray. Methods: Sample consisted of 40 patients before and after pubertal peak of growth selected from the archive of the São Leopoldo Mandic Institute and Research Center, Campinas, Brazil. Anatomical structures, reference points, lines and planes were traced, and posteriorly a superimposition was performed using the palatal plane and a line perpendicular to this passage through the most posterior point of the pterygomaxillary fossa as reference. Later, the distance between the two centroid points (before and after the peak of puberty) was measured using the digital caliper, both horizontally and vertically. The palatal plane (x-axis) and a line perpendicular to this passage through the most posterior point of the pterygomaxilary fossa (y-axis) were chosen because they undergo minimal changes during growth. Results: No significant difference on the location of Centroid points on both X and Y axis (p >0.05) were observed between before and after the growth peak cephalometric tracings, showing an average change in positioning of 0.36mm on the X axis and 0.37mm on the Y axis. Conclusions: For this reason, this point can be indicated to be used clinically as a stable reference to evaluate craniofacial growth while performing superimposition methods.

RESUMO Objetivo: O objetivo deste estudo foi utilizar telerradiografias lateriais de pacientes antes e depois do pico de crescimento, e realizar sobreposições de desenhos cefalométricos para avaliar o comportamento do ponto Centróide, o centro geométrico da face. Métodos: Foram selecionadas telerradiografias de norma lateral de 40 pacientes tomadas antes e depois de seu pico de puberdade do acervo de Ortodontia do Centro de Pesquisas Odontológicas São Leopoldo Mandic, na cidade de Campinas. As estruturas e traçados cefalométricos devidamente desenhados, foram sobrepostos tendo como referência estável o plano palatal e a linha perpendicular a esta que passe pelo ponto mais posterior da fossa pterigomaxilar. Em seguida foi medida a distância entre os dois pontos centroides (antes e após o pico de puberdade) por meio de paquímetro digital tanto no sentido horizontal quanto no vertical. O plano palatal (eixo x) e a linha perpendicular a esta que passe pelo ponto mais posterior da fossa pterigomaxilar (eixo y) foram escolhidos por sofrerem mínimas alterações nas suas direções durante o crescimento. Resultados: Não foi observada diferença estatisticamente significante na localização dos pontos Centróides em ambos os eixos X e Y (p>0,05) quando comparou-se os traçados antes e depois do pico de crescimento, mostrando uma alteração, em média, no posicionamento de 0,36mm no Eixo X e 0,37mm no Eixo Y. Conclusão: Assim, este ponto pode ser utilizado como referência estável para avaliação do crescimento craniofacial nas sobreposições.

Antimicrobial activity of probiotics against oral pathogens around orthodontic mini-implants: an in vitro study.

OBJECTIVE: The aim of this in vitro study was to evaluate the antimicrobial effect of five types of non-industrialized and industrialized probiotics on biofilms formed around orthodontic mini-implants. The null hypothesis tested was: there is no difference in the antimicrobial effect between the five types of probiotics tested around orthodontic mini-implants. METHODS: For the experiment, 120 mini-implants were immersed for seven days in Staphylococcus aureus solution for biofilm formation, and were subsequently plated in culture medium containing probiotics. The mini-implants were divided into six different groups, according to the probiotic used: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) Lactobacillus from fermented milk Yakult®; G5) Lactobacillus from fermented milk Batavito® and G6) without use of probiotic, as negative control. Qualitative and quantitative analyses of all groups were performed using the CFU (colony forming unit) count. RESULTS: The study showed that groups G4 and G6 did not present antimicrobial activity, in comparison to groups G1, G2, G3, and G5 (p< 0.05), which demonstrated antimicrobial activity. CONCLUSION: The non-commercial probiotic bacteria, Lactobacillus casei and Lactobacillus rhamnosus, as well as commercially available fermented milk Batavito® presented promising results in the reduction of colonization of mini-implants by S. aureus. Therefore, the null hypothesis was rejected.

Antimicrobial activity of probiotics against oral pathogens around orthodontic mini-implants: an in vitro study

ABSTRACT Objective: The aim of this in vitro study was to evaluate the antimicrobial effect of five types of non-industrialized and industrialized probiotics on biofilms formed around orthodontic mini-implants. The null hypothesis tested was: there is no difference in the antimicrobial effect between the five types of probiotics tested around orthodontic mini-implants. Methods: For the experiment, 120 mini-implants were immersed for seven days in Staphylococcus aureus solution for biofilm formation, and were subsequently plated in culture medium containing probiotics. The mini-implants were divided into six different groups, according to the probiotic used: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) Lactobacillus from fermented milk Yakult®; G5) Lactobacillus from fermented milk Batavito® and G6) without use of probiotic, as negative control. Qualitative and quantitative analyses of all groups were performed using the CFU (colony forming unit) count. Results: The study showed that groups G4 and G6 did not present antimicrobial activity, in comparison to groups G1, G2, G3, and G5 (p< 0.05), which demonstrated antimicrobial activity. Conclusion: The non-commercial probiotic bacteria, Lactobacillus casei and Lactobacillus rhamnosus, as well as commercially available fermented milk Batavito® presented promising results in the reduction of colonization of mini-implants by S. aureus. Therefore, the null hypothesis was rejected.

RESUMO Objetivo: O objetivo do presente estudo in vitro foi avaliar o efeito antimicrobiano de cinco tipos de probióticos não industrializados ou industrializados em biofilmes formados ao redor de mini-implantes ortodônticos. A hipótese nula testada foi: não há diferença no efeito antimicrobiano entre os cinco tipos de probióticos testados em torno dos mini-implantes ortodônticos. Métodos: Para o experimento, as cabeças de 120 mini-implantes foram imersas por sete dias em solução de Staphylococcus aureus para formação de biofilme e, posteriormente, semeadas em meio de cultura contendo probióticos. Os mini-implantes foram divididos em seis grupos diferentes, de acordo com o probiótico utilizado: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) lactobacilos do leite fermentado Yakult®; G5) lactobacilos do leite fermentado Batavito®; e G6) sem uso de probiótico, como controle negativo. As análises qualitativas e quantitativas de todos os grupos foram realizadas usando a contagem de UFCs (unidades formadoras de colônia). Resultados: O estudo mostrou que os grupos G4 e G6 não apresentaram atividade antimicrobiana, em comparação aos grupos G1, G2, G3 e G5 (p< 0,05), os quais demonstraram atividade antimicrobiana. Conclusão: As bactérias probióticas não comerciais, Lactobacillus casei e Lactobacillus rhamnosus, assim como o leite fermentado comercializado, Batavito®, apresentaram resultados promissores na redução da colonização dos mini-implantes por S. aureus. Portanto, a hipótese nula foi rejeitada.

Reliability of a Centroid method to estimate head position in cephalometric diagnosis / Confiabilidade de um método baseado no ponto Centróide para estimar a posição da cabeça no diagnóstico cefalométrico

ABSTRACT Objective The objective of this study was to 1) evaluate the reproducibility of natural head position (NHP) in different professional groups; 2) compare three cephalometric methods of estimating head position to the established natural head position and 3) investigate the applicability of a new method to estimated head position using a Centroid method. Methods The sample consisted of 105 individual cephalometric tracings and photographs. For the first evaluation, copies of the lateral photographs were reproduced for each patient and 3 professionals with different expertise (experienced orthodontists, orthodontic students and orthognatic surgeon) were instructed to position the photographs in NHP. Later, 3 different methods to obtain NHP were assessed: 1) the Frankfort Horizontal Plane (FRANK), 2) Sella-Nasion 7º Line (SN7) and 3) proposed Horizontal Reference Line based on Centroid. Angles formed by the evaluated planes/lines and True Vertical Line obtained were measured. Gender and skeletal discrepancy were considered. Results The results showed a significant difference between NHP obtained from orthodontists and surgeons compared to students (p<0.0001). Also results showed no effect of skeletal classification and gender did on measurement (p>0.05). Both SN minus 7º and FRANK methods showed a high variability (p < 0,01) compared to Centroid method. Conclusion NHP may be affected by the professional experience. The proposed horizontal line based on Centroid is a valid method for estimating head position, thus, may be indicated to use as a diagnostic tool in Orthodontics and Orthognatic Surgery.

RESUMO Objetivo Os objetivos deste estudo foram 1) avaliar a reprodutibilidade da posição natural da cabeça (PNC) em diferentes grupos de profissionais; 2) comparar três métodos cefalométricos para estimar a posição da cabeça e compará-los à posição natural estabelecida da cabeça e 3) investigar a aplicabilidade de um novo método para estimar a posição da cabeça usando o método Centróide. Métodos A amostra foi composta por 105 traçados cefalométricos e fotografias individuais. Para a primeira avaliação, cópias das fotografias laterais foram reproduzidas para cada paciente e três profissionais com diferentes conhecimentos (ortodontistas experientes, estudantes de ortodontia e cirurgião ortognático) foram instruídos a posicionar as fotografias no PNC. Posteriormente, foram avaliados três métodos diferentes para obter posição estimada da cabeça: 1) o Plano Horizontal de Frankfort (FRANK), 2) a Linha Sella-Nasion 7º (SN7) e 3) a Linha de Referência Horizontal proposta, baseada em Centróide. Os ângulos formados pelos planos/linhas avaliados e pela linha vertical verdadeira obtidos foram medidos. Foram considerados a discrepância esquelética e o gênero. Resultados Os resultados mostraram uma diferença significativa entre o PNC obtido por ortodontistas e cirurgiões em relação aos estudantes (p <0,0001). Os métodos SN7 e FRANK apresentaram alta variabilidade (p <0,01), enquanto o método baseado em Centróide mostrou menor variabilidade. Conclusão a PNC pode ser afetada pela experiência profissional. A linha horizontal proposta baseada em Centróide é um método válido para estimar a posição da cabeça, portanto, pode ser indicada para uso como ferramenta de diagnóstico em Ortodontia e Cirurgia Ortognática.

Effects of Photobiomodulation on Root Resorption Induced by Orthodontic Tooth Movement and RANKL/OPG Expression in Rats.

The aim of this study was to evaluate the effects of photobiomodulation on the repair of induced root resorption (RR) after orthodontic tooth movement. Twenty male rats were used in this study. Forty right and left upper first molars were evaluated and divided into four groups (n = 10): negative control group (NC), no tooth movement or irradiation; positive control group (PC), induced tooth movement and root resorption; conventional treatment group (CT), force was removed after 7 days; and photobiomodulation group (PBM) after force removal molars were irradiated every 48 h for 7 days using GaAlAs diode laser (810 nm). Energy per point was 1.5 J (100 mW, 15 s, 75 J cm-2 ). NC and PC were euthanized on day 7; CT and PBM on day 14. Histomorphometric and immunohistochemsitry analyses showed increase in area of root resorption in all groups (P < 0.05) compared to NC. RR lacunae were larger in CT compared to PC and PBM at the compression side of the distal root. OPG was higher in PBM group (P < 0.05). PBM group showed low expression of RANKL compared to PC and CT on the tension side. PBM can potentially affect RR progression by increasing OPG expression in the compression area and decreasing number of clastic cells in the root surface.

Photobiomodulation increases intrusion tooth movement and modulates IL-6, IL-8 and IL-1ß expression during orthodontically bone remodeling.

This study investigated the effects of photobiomodulation (PBM) on upper molar intrusion movement, regarding acceleration of orthodontic movement and its molecular effects. The sample consisted of 30 patients with indication of tooth intrusion for oral rehabilitation. Teeth were divided into three different groups: G1 (n = 10) pre-molars without force or laser application (control); G2 (n = 10) upper molar intrusion; and G3 (n = 10) upper molar intrusion and PBM. On PBM treated molars, the teeth were irradiated with a low-power diode laser (808 nm, 100 mW), receiving 1 J per point, density of 25 J/cm2 , with application of 10 s per point, 10 points (5 per vestibular and 5 per palatal region). Orthodontic force of intrusion applied every 30 days and PBM was performed immediately, 3 and 7 days after force application for 3 months. Gingival crevicular fluid was collected at the same time periods as the laser applications and interleukins (IL) 1-ß, -6 and -8 were evaluated by enzyme-linked immunosorbent assay. Clinical measures were performed monthly to verify the amount of intrusion. The levels of IL-6, IL-8 and IL-1ß increased under orthodontic force (G2 and G3) when compared to control group (G1), however, the cytokines levels were significantly higher after PBM (G3). The mean intrusion velocity was 0.26 mm/month in the irradiated group (G3), average duration of 8 months vs 0.17 mm/month for the non-irradiated group (G2), average duration of 12 months. This study suggests that PBM accelerates tooth movement during molar intrusion, due to modulation of IL-6, IL-8 and IL-1ß during bone remodeling.

Effects of corticopuncture (CP) and low-level laser therapy (LLLT) on the rate of tooth movement and root resorption in rats using micro-CT evaluation.

The aim of this study was to compare the rate of tooth displacement, quantity of root resorption, and alveolar bone changes in five groups: corticopuncture (CP), low-level laser therapy (LLLT), CP combined with LLLT (CP + LLLT), control (C), and negative control (NC). A total of 60 half-maxilla from 30 male Wistar rats (10 weeks old) were divided randomly into five groups: three (CP, LLLT, and CP + LLLT) test groups with different stimulation for accelerated-tooth-movement (ATM), one control (C) group, and one negative control (NC) group with no tooth movement. Nickel-titanium coil springs with 50 g of force were tied from the upper left and right first molars to micro-implants placed behind the maxillary incisors. For the CP and CP + LLLT groups, two perforations in the palate and one mesially to the molars were performed. For the LLLT and CP + LLLT groups, GaAlAs diode laser was applied every other day for 14 days (810 nm, 100 mW, 15 s). The tooth displacements were measured directly from the rat's mouth and indirectly from microcomputer (micro-CT) tomographic images. Bone responses at the tension and compression sites and root resorption were analyzed from micro-CT images. The resulting alveolar bone responses were evaluated by measuring bone mineral density (BMD), bone volume fraction (BV/TV), and trabecular thickness (TbTh). Root resorption crater volumes were measured on both compression and tension sides of mesial and distal buccal roots. The tooth displacement in the CP + LLLT group was the greatest when measured clinically, followed by the CP, LLLT, and control groups (C and NC), respectively (p <0.05). The tooth movements measured from micro-CT images showed statistically higher displacement in the CP and CP + LLLT groups compared to the LLLT and control groups. The BMD, BV/TV, and TbTh values were lower at the compression side and higher at the tension side for all three test groups compared to the control group. The root resorption crater volume of the distal buccal root was higher in the control group, followed by CP, LLLT, and CP + LLLT, mostly at the compression site. Combining corticopuncture and low-level laser therapy (CP + LLLT) produced more tooth displacement and less root resorption at the compression side. The combined technique also promoted higher alveolar bone formation at the tension side.

Corticopuncture Facilitated Microimplant-Assisted Rapid Palatal Expansion.

INTRODUCTION: Microimplant-assisted rapid palatal expansion (MARPE) has been considered an alternative to avoid extensive surgical procedures. In order to obtain skeletal results of MARPE, force should be enough to overcome areas of resistance and the first one that is required to be disrupted is the midpalatal suture, which becomes increasingly interdigitated after adolescence. OBJECTIVE: The present study aimed at providing a novel approach using a minimally invasive method called corticopuncture (CP) in association with MARPE illustrated by a case report of a 35-year-old Brazilian female Caucasian patient presenting maxillary transverse deficiency. METHOD: Treatment plan started with an orthopedic correction of the transverse problem using a MARPE device. After many unsuccessful attempts to activate MARPE, corticopunctures were performed along the midpalatal suture. CP procedure at the midpalatal suture included 8 perforations (2 mm apart), performed after previous predrilling followed by miniscrew insertion (5 mm thread length and 1.8 mm diameter). RESULTS: After CP and new activation protocol, the opening of the midpalatal suture was observed by CBCT images, showing skeletal results, suture split of 3.14 mm (premolar area) and 2.06 (molar area), an increase of 4.3 mm (premolar) and 3.03 mm (molar) in basal bone width, 4.43 mm (premolar) and 3.1 mm (molar) in cortical bone width, and minimal dental effects (mean of 1.2° of tooth tipping). CONCLUSION: The combination of MARPE and corticopuncture method was proved to be a nonsurgical treatment option to correct maxillary transverse deficiency in an adult patient. CP was able to weaken suture interdigitation thus facilitating the split.

Effects of Low-Level Laser Therapy in Orthodontic Patients on Immediate Inflammatory Response After Mini-Implants Insertion: A Preliminary Report.

BACKGROUND: The primary stability of a mini-implant is crucial to treatment sequence since most orthodontic mini-implant failures occur at an early stage. Irritation or inflammation of peri-implant tissues has been related to decreasing mini-implant success. PURPOSE: This study evaluates the effect of low-level laser therapy on initial inflammation after orthodontic mini-implants installation. METHODS: Ten volunteers received two mini-implants (1.3 mm diameter, 7 mm length). One mini-implant was inserted on each side of the maxilla following manufacturer recommendation. On the right side, low-level laser therapy (LLLT) was applied (diode laser 660 nm, 40 mW, 1 min, 2.4 J of total energy). Peri-implant crevicular fluid (PGF) was obtained after 24 h (T1), 48 h (T2), and 72 h (T3) to identify levels of interleukin (IL)-6 and IL-8 around mini-implants and around upper first premolars. RESULTS: An increase in interleukin levels was observed for both groups, compared to upper first premolar. PGF around nonirradiated mini-implants showed higher levels of IL-8. Levels of IL-6 24 h after mini-implant insertion were higher for laser group. CONCLUSIONS: LLLT modulates the initial inflammation after the insertion of mini-implant, possibly increasing the mini-implant success prognostic and decreasing patient discomfort.

Miniscrew-assisted rapid palatal expander (MARPE): the quest for pure orthopedic movement.

The midpalatal suture has bone margins with thick connective tissue interposed between them, and it does not represent the fusion of maxillary palatal processes only, but also the fusion of palatal processes of the jaws and horizontal osseous laminae of palatal bones. Changing it implies affecting neighboring areas. It has got three segments that should be considered by all clinical analyses, whether therapeutic or experimental: the anterior segment (before the incisive foramen, or intermaxillary segment), the middle segment (from the incisive foramen to the suture transversal to the palatal bone ) and the posterior segment (after the suture transversal to the palatal bone ). Rapid palatal expansion might be recommended for patients at the final pubertal growth stage, in addition to adult patients with maxillary constriction. It represents a treatment solution that can potentially avoid surgical intervention. When performed in association with rapid palatal expanders, it might enhance the skeletal effects of the latter. Of the various designs of expansion appliances, MARPE (miniscrew-assisted rapid palatal expander) has been modified in order to allow its operational advantages and outcomes to become familiar in the clinical practice.

Low-level laser therapy stimulates bone metabolism and inhibits root resorption during tooth movement in a rodent model.

This study evaluated the biological effects of low-level laser therapy (LLLT) on bone remodeling, tooth displacement and root resorption, occurred during the orthodontic tooth movement. Upper first molars of a total of sixty-eight male rats were subjected to orthodontic tooth movement and euthanized on days 3, 6, 9, 14 and 21 days and divided as negative control, control and LLLT group. Tooth displacement and histomorphometric analysis were performed in all animals; scanning electron microscopy analysis was done on days 3, 6 and 9, as well as the immunohistochemistry analysis of RANKL/OPG and TRAP markers. Volumetric changes in alveolar bone were analyzed using MicroCT images on days 14 and 21. LLLT influenced bone resorption by increasing the number of TRAP-positive osteoclasts and the RANKL expression at the compression side. This resulted in less alveolar bone and hyalinization areas on days 6, 9 and 14. LLLT also induced less bone volume and density, facilitating significant acceleration of tooth movement and potential reduction in root resorption besides stimulating bone formation at the tension side by enhancing OPG expression, increasing trabecular thickness and bone volume on day 21. Taken together, our results indicate that LLLT can stimulate bone remodeling reducing root resorption in a rat model. LLLT improves tooth movement via bone formation and bone resorption in a rat model.

Miniscrew-assisted rapid palatal expander (MARPE): the quest for pure orthopedic movement

ABSTRACT The midpalatal suture has bone margins with thick connective tissue interposed between them, and it does not represent the fusion of maxillary palatal processes only, but also the fusion of palatal processes of the jaws and horizontal osseous laminae of palatal bones. Changing it implies affecting neighboring areas. It has got three segments that should be considered by all clinical analyses, whether therapeutic or experimental: the anterior segment (before the incisive foramen, or intermaxillary segment), the middle segment (from the incisive foramen to the suture transversal to the palatal bone ) and the posterior segment (after the suture transversal to the palatal bone ). Rapid palatal expansion might be recommended for patients at the final pubertal growth stage, in addition to adult patients with maxillary constriction. It represents a treatment solution that can potentially avoid surgical intervention. When performed in association with rapid palatal expanders, it might enhance the skeletal effects of the latter. Of the various designs of expansion appliances, MARPE (miniscrew-assisted rapid palatal expander) has been modified in order to allow its operational advantages and outcomes to become familiar in the clinical practice.

RESUMO A sutura palatina mediana tem margens ósseas interpostas por tecido conjuntivo denso e não representa apenas a união dos processos palatinos da maxila, mas também a dos processos alveolares das maxilas e das lâminas horizontais dos ossos palatinos. Modificá-la implica em influenciar outras áreas vizinhas. Ela tem três segmentos a serem considerados em todas as análises clínicas, terapêuticas e experimentais: anterior (antes do forame incisivo, ou intermaxilar), médio (do forame incisivo até a sutura transversa com o osso palatino) e posterior (após a sutura transversa com o osso palatino). A expansão rápida da maxila pode ser indicada para pacientes que se encontram no final da fase de crescimento da puberdade, além de pacientes adultos com atresia maxilar, representando uma solução de tratamento, possivelmente evitando uma intervenção cirúrgica. Quando associada a aparelhos de protração maxilar, pode maximizar os efeitos esqueléticos desses. Entre os vários designs de aparelhos disjuntores, ultimamente encontra-se o MARPE (Miniscrew-Assisted Rapid Palatal Expander), que tem sido modificado para que ocorra, na rotina clínica, uma familiarização com suas vantagens operatórias e resultados obtidos.

Evaluation of stiffness and plastic deformation of active ceramic self-ligating bracket clips after repetitive opening and closure movements.

OBJECTIVE: The aim of this study was to assess whether repetitive opening and closure of self-ligating bracket clips can cause plastic deformation of the clip. METHODS: Three types of active/interactive ceramic self-ligating brackets (n = 20) were tested: In-Ovation C, Quicklear and WOW. A standardized controlled device performed 500 cycles of opening and closure movements of the bracket clip with proper instruments and techniques adapted as recommended by the manufacturer of each bracket type. Two tensile tests, one before and one after the repetitive cycles, were performed to assess the stiffness of the clips. To this end, a custom-made stainless steel 0.40 x 0.40 mm wire was inserted into the bracket slot and adapted to the universal testing machine (EMIC DL2000), after which measurements were recorded. On the loading portion of the loading-unloading curve of clips, the slope fitted a first-degree equation curve to determine the stiffness/deflection rate of the clip. RESULTS: The results of plastic deformation showed no significant difference among bracket types before and after the 500 cycles of opening and closure (p = 0.811). There were significant differences on stiffness among the three types of brackets (p = 0.005). The WOW bracket had higher mean values, whereas Quicklear bracket had lower values, regardless of the opening/closure cycle. CONCLUSION: Repetitive controlled opening and closure movements of the clip did not alter stiffness or cause plastic deformation.

Evaluation of stiffness and plastic deformation of active ceramic self-ligating bracket clips after repetitive opening and closure movements

OBJECTIVE: The aim of this study was to assess whether repetitive opening and closure of self-ligating bracket clips can cause plastic deformation of the clip.METHODS: Three types of active/interactive ceramic self-ligating brackets (n = 20) were tested: In-Ovation C, Quicklear and WOW. A standardized controlled device performed 500 cycles of opening and closure movements of the bracket clip with proper instruments and techniques adapted as recommended by the manufacturer of each bracket type. Two tensile tests, one before and one after the repetitive cycles, were performed to assess the stiffness of the clips. To this end, a custom-made stainless steel 0.40 x 0.40 mm wire was inserted into the bracket slot and adapted to the universal testing machine (EMIC DL2000), after which measurements were recorded. On the loading portion of the loading-unloading curve of clips, the slope fitted a first-degree equation curve to determine the stiffness/deflection rate of the clip.RESULTS: The results of plastic deformation showed no significant difference among bracket types before and after the 500 cycles of opening and closure (p = 0.811). There were significant differences on stiffness among the three types of brackets (p = 0.005). The WOW bracket had higher mean values, whereas Quicklear bracket had lower values, regardless of the opening/closure cycle.CONCLUSION: Repetitive controlled opening and closure movements of the clip did not alter stiffness or cause plastic deformation.

OBJETIVO: o objetivo deste estudo foi avaliar se a abertura e o fechamento repetitivo do clipe de braquetes autoligáveis podem causar deformação plástica do clipe.MÉTODOS: três tipos de braquetes autoligáveis ativos/interativos estéticos (n = 20) foram testados: In-Ovation C, Quicklear e WOW. Um dispositivo realizou, de forma controlada e padronizada, 500 ciclos de abertura e de fechamento do clipe, com instrumentos e técnicas adequadas, tal como recomendado pelo fabricante de cada tipo de braquete. Dois ensaios de tração, um antes e um depois dos ciclos repetitivos, foram realizados para se avaliar a rigidez dos clipes. Para o ensaio de tração, um fio de 0,40 x 0,40mm de aço inoxidável foi inserido no slot do braquete e adaptado em uma máquina universal de ensaios (EMIC DL2000), sendo as medições registradas. Na porção retilínea da curva de carregamento dos clipes, a inclinação é definida por uma equação de primeiro grau, determinando o coeficiente de elasticidade (rigidez) do clipe.RESULTADOS: os resultados quanto à deformação plástica não mostraram nenhuma diferença significativa entre os tipos de braquetes, antes e depois dos 500 ciclos de abertura e de fechamento (p = 0,811). Foram encontradas diferenças significativas na rigidez entre os três tipos de braquetes (p = 0,005): o braquete WOW demonstrou valores médios mais elevados, e o braquete Quicklear demonstrou valores mais baixos, independentemente do ciclo de abertura e fechamento.CONCLUSÃO: movimentos repetitivos controlados de abertura e de fechamento do clipe não alteraram a rigidez ou causaram deformação plástica.

Novo desenho para a contenção ortodôntica 3x3 fixa / New design of 3x3 fixed orthodontic retainer

As contenções ortodônticas são frequentemente utilizadas após tratamento. Na arcada inferior, a contenção fixa é a mais empregada. Através de um relato de caso, este trabalho se propõe a apresentar os detalhes técnicos de um novo desenho para a contenção ortodôntica 3 x 3 fixa que foi desenvolvido e patenteado pelo autor deste estudo sob o número de registro BR2020140103045 no Instituto Nacional de Propriedade Industrial (INPI). Neste trabalho são descritos os materiais e as etapas para a correta confecção, posicionamento e instalação dessa nova proposta de contenção fixa. Dentre as vantagens desse novo desenho evidencia-se uma higienização adequada da região interproximal dos dentes envolvidos, através de um fácil acesso do fio dental; situar-se distante do periodonto de proteção e permitir acesso dos instrumentos periodontais para raspagem e polimento coronário

Orthodontic retainers are frequently used after treatment. Fixed retention is more used in the lower arch. Through a case report, this article proposes to present technical details of a brand new design of 3 x 3 fixed orthodontic retention, which was developed by the author and patented at the Brazilian National Institute of Industrial Property under registration BR202014010345. This work describes the materials and steps for correct manufacturing, positioning and installation of this new fixed retention proposed. Among the advantages of this new design are evident an adequate cleaning of the interproximal area of the involved teeth, through easy access of dental floss, it is located far from the periodontal and allows easy access to periodontal instruments for crown scaling and polishing.

Effects of photodynamic therapy on Gram-positive and Gram-negative bacterial biofilms by bioluminescence imaging and scanning electron microscopic analysis.

OBJECTIVE: The aim of this study was to test photodynamic therapy (PDT) as an alternative approach to biofilm disruption on dental hard tissue, We evaluated the effect of methylene blue and a 660 nm diode laser on the viability and architecture of Gram-positive and Gram-negative bacterial biofilms. MATERIALS AND METHODS: Ten human teeth were inoculated with bioluminescent Pseudomonas aeruginosa or Enterococcus faecalis to form 3 day biofilms in prepared root canals. Bioluminescence imaging was used to serially quantify and evaluate the bacterial viability, and scanning electron microscopic (SEM) imaging was used to assess architecture and morphology of bacterial biofilm before and after PDT employing methylene blue and 40 mW, 660 nm diode laser light delivered into the root canal via a 300 µm fiber for 240 sec, resulting in a total energy of 9.6 J. The data were statistically analyzed with analysis of variance (ANOVA) followed by Tukey test. RESULTS: The bacterial reduction showed a dose dependence; as the light energy increased, the bioluminescence decreased in both planktonic suspension and in biofilms. The SEM analysis showed a significant reduction of biofilm on the surface. PDT promoted disruption of the biofilm and the number of adherent bacteria was reduced. CONCLUSIONS: The photodynamic effect seems to disrupt the biofilm by acting both on bacterial cells and on the extracellular matrix.

Camouflage treatment of severe bialveolar protrusion in skeletal Class II using miniscrew anchorage.

The aim of this case report was to demonstrate the efficient use of miniscrew as anchorage in a 12-year-old male patient with skeletal and dental Class II and severe biprotrusion and lips procumbency. It was proposed a compensating orthodontic treatment with 4 premolar extraction and maximum anchorage. Since the patient abandoned treatment after one premolar extraction, loss of anchorage occurred and treatment plan was modified to maximize lower retraction with miniscrew anchorage and distalization of the upper arch using two methods: Class II elastics from lower miniscrews to the sliding jig and modified transpalatal arch using palatal miniscrew. The results showed a significant improvement of his facial appearance, lip protrusion and also dental esthetics and function. It was concluded that miniscrews can provide absolute anchorage for maximum anterior retraction in order to correct dentoalveolar biprotrusion in the presence of limited thickness alveolar bone.