Influence of mannan epitopes in glycoproteins--Concanavalin A interaction. Comparison of natural and synthetic glycosylated proteins.

Two natural glycoproteins/glycoenzymes, invertase and glucoamylase, and two neoglycoconjugates, synthetized from Saccharomyces cerevisiae mannan, bovine serum albumin and penicillin G acylase were tested for interaction with lectin Concanavalin A (Con A). The interaction of natural and synthetic glycoproteins with Con A was studied using three different experimental methods: (i). quantitative precipitation in solution (ii). sorption to Con A immobilized on bead cellulose; and (iii). kinetic measurement of the interaction by surface plasmon resonance. Prepared neoglycoproteins were further characterized: saccharide content, molecular weight, polydispersion, kinetic and equilibrium association constants with Con A were determined. It can be concluded that the used conjugation method proved to be able to produce neoglycoproteins with similar properties like natural glycoproteins, i.e. enzymatic activity (protein part) and lectin binding activity (mannan part) were preserved and the neoglycoconjugates interact with Con A similarly as natural mannan-type glycoproteins.

Neoglycoconjugates of mannan with bovine serum albumin and their interaction with lectin concanavalin A.

Neoglycoconjugates were prepared from mannan isolated from yeast Saccharomyces cerevisiae and activated by periodate oxidation to create aldehyde groups. Various degrees of oxidation introduced 11-28 aldehyde groups per mannan molecule and simultaneously resulted in a molar mass decrease from 46 to 44.5-31 kDa. The activated mannans were subsequently conjugated with bovine serum albumin forming neoglycoconjugates. Some parameters of these mannan-bovine serum albumin conjugates were characterized: saccharide content 25-30% w/w, molar mass within the range 169-246 kDa, and polydispersion (M(w)/M(n)) from 2.8 to 3.6. The interaction of these conjugates with lectin concanavalin A was studied using three different methods: (i) quantitative precipitation in solution; (ii) sorption to concanavalin A immobilized on bead cellulose; and (iii) kinetic measurement of the interaction by surface plasmon resonance. Quantitative precipitation assay showed only negligible differences in the precipitation course of original mannan and the corresponding mannan-bovine serum albumin conjugates. Both the sorption method (equilibrium method) and the surface plasmon resonance measurement (kinetic method) demonstrates that the values of dissociation constant K(D) of all synthetic neoglycoconjugates were within the range 10(-7) - 10(-8) mol x L(-1) (close to K(D) = 10(-8) mol x L(-1) determined by the sorption method for the original mannan). In conclusion, characterization of synthetic neoglycoconjugates confirmed that the method used for their preparation retained the ability of mannan moiety to interact with concanavalin A.

Development of a flow injection capillary chemiluminescent ELISA using an imprinted polymer instead of the antibody.

A flow injection competitive assay analogous to enzyme immunoassays has been developed using a molecularly imprinted polymer instead of the antibody. A glass capillary was modified by covalently attaching an imprinted polymer to the inner capillary wall. The herbicide 2,4-dichlorophenoxyacetic acid was used as a model analyte. The analyte was labeled with tobacco peroxidase, and chemiluminescence was used for detection in combination with a photomultiplier tube or a CCD camera. In a competitive mode, the analyte-peroxidase conjugate was passed together with the free analyte through the polymer-coated capillary mounted in a flow system. After a washing step, the chemiluminescent substrate was injected and the bound fraction of the conjugate was quantified by measuring the intensity of the emitted light. Calibration curves corresponding to analyte concentrations ranging from 0.5 ng mL(-1) to 50 microg mL(-1) (2.25 nM-225 microM) were obtained. A lowered detection limit by 2 orders of magnitude was obtained when detection was done in discontinuous mode and the chemiluminescence light was conducted inside the photomultiplier tube by an optical fiber bundle, thus yielding a dynamic range of 5 pg mL(-1)-100 ng mL(-1) (22.5 pM-450 nM).

Modeling of saccharide utilization in primary beer fermentation with yeasts immobilized in calcium alginate.

Immobilized beer fermentation was studied using an industrial bottom-fermenting yeast strain Saccharomyces cerevisiae. The yeast cells were immobilized in 2.5% calcium alginate gel and used for brewing in a five-vessel cascade reactor. The fermentation was performed at 15 degrees C at various flow rates. A nonstructured mathematical model was developed to simulate the performance of continuous primary fermentation of lager beer. The model was based on the following variables: maltose, maltotriose, glucose, fructose, ethanol, and cell concentration. Experimental values of these variables were determined in samples taken at regular intervals. For experimental data fitting a nonlinear regression was used. Substrate consumption was characterized by specific substrate consumption rate and saturation constant. The values of these two parameters were optimized for all four substrates. Inhibition effects of substrates and product were analyzed using various inhibition patterns. Only the inhibition effect of maltose on maltose consumption was clearly identified. A good-fitting relationship for maltose inhibition was found, and inhibition constants were calculated.

Functionalized surfaces for optical biosensors: applications to in vitro pesticide residual analysis.

Functionalized biosensing surfaces were developed for chemiluminescent immunoassay of pesticides. Two approaches to construct functionalized surfaces were tested: (i) pesticide is immobilized to the surface and interacts with a labeled antibody; (ii) antibody is immobilized and interacts with a labeled pesticide. As labels alkaline phosphatase and peroxidase were used with their corresponding substrates CSPD and luminol, respectively. Light produced by chemiluminescent substrate was detected by a thermoelectrically cooled CCD camera or a photomultiplier. The best detection limit 0.00001 ng/ml was obtained using antibodies immobilized to dextran-enhanced surface. Completely renewable surface was obtained using reversible lectin-monosaccharide interaction, one surface was used for 200 analyses without any loss of binding capacity. Most favorable stability and cost per analysis was achieved with molecularly imprinted polymer (MIP) instead of antibody. The functionalized biosensing surfaces were prepared to detect 2,4-dichlorophenoxyacetic (2,4-D) acid as a model pesticide. The developed concepts are, however, generally applicable to other pesticides and to other optical formats, e.g. optical fiber.

Biomaterials for molecular electronics development of optical biosensor for retinol.

Molecular electronics involves expertise from several branches of science. Various biomaterials and electronics are involved in the fabrication of such devices. While passive biomaterials are involved in anchoring the active biomolecules, the latter are involved in switching and/or signal transduction. In the present investigation we have used a glass-capillary-based approach to design a biosensor for retinol. The sensing element is retinol-binding protein (RBP). The affinity of retinoic-acid-horseradish peroxidase (conjugate) to RBP is tested using a surface plasmon resonance technique. A simple photomultiplier-tube-based system is exploited to monitor the chemiluminescent signal generated upon reaction of hydrogen peroxide and luminol with the conjugate bound to RBP. The photomultiplier tube is directly coupled to a computer for data logging.

Surface plasmon resonance based pesticide assay on a renewable biosensing surface using the reversible concanavalin A monosaccharide interaction.

A competitive immunoassay based on surface plasmon resonance (SPR) for the detection of the pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) is reported. The novelty of the assay is based on the regeneration of the chip surface by the reversible interaction between monosaccharide (D-glucose) and lectin (Concanavalin A). Concanavalin A-2,4-D conjugate was chemically synthesized, purified and used for binding to the SPR chip modified with covalently bound alpha-D-glucose. The interaction between anti-2,4-D antibody and the surface-bound concanavalin A-2,4-D conjugate was monitored by surface plasmon resonance and the response was used for the quantification of 2,4-D. The dynamic range of the calibration curve was between 3 and 100 ng/ml. The demonstrated principle of surface regeneration based on the reversible sugar-lectin interaction may be of more general applicability in immunoassays.

The development and applications of thermal biosensors for bioprocess monitoring.

Enzyme thermistors are biosensors that use thermal resistors to measure the heat change caused by an enzymatic reaction. They combine the selectivity of enzymes with the sensitivity of biosensors and allow continuous analysis in a flow-injection mode. They can be used to monitor fermentation systems, biocatalysis, enzyme-catalysed synthesis and clinical and food technology. This article gives an overview of the general principles of enzyme thermistors, the sampling process and the ongoing developments in the field of bioprocess monitoring.

Amperometric biosensors based on solid binding matrices applied in food quality monitoring.

Solid binding matrix (SBM) based composite transducers have been used for development of series of multibiosensor systems applicable in various fields. Here we present two hybrid three-channel multibiosensors for simultaneous amperometric operation in food quality control, i.e. glucose/fructose/ethanol multibiosensor, based on glucose oxidase/fructose dehydrogenase/alcohol dehydrogenase surface-modified enzyme electrodes and L-lactate/L-malate/sulfite multibiosensor, based on L-lactate dehydrogenase/L-malate dehydrogenase/sulfite oxidase surface-modified enzyme electrodes. Different parameters have been studied in order to optimize the response of the multibiosensor systems. The multibiosensor showed a good sensitivity, linear range and storage stability. The multibiosensors were used for the determination of glucose, fructose, ethanol, L-lactate, L-malate and sulfite in samples of wine, resulting in a good agreement with data certified by the supplier. Comparison of various designs, surface-modified, bulk-modified and thick-cover, of SBM based biosensors is studied on the example of fructose biosensor.

Microbial cell-based biosensor for sensing glucose, sucrose or lactose.

Biosensors for the determination of glucose, sucrose and lactose were based on a Clark-type oxygen electrode covered with a membrane containing microbial cells. The glucose-sensing membrane was prepared with intact cells of Gluconobacter oxydans immobilized in gelatin cross-linked with glutardialdehyde. The disaccharide-sensing membranes were prepared by co-immobilization of G. oxydans with cells of Saccharomyces cerevisiae containing invertase for sucrose determination and with permeabilized cells of Kluyveromyces marxianus containing beta-galactosidase for lactose determination. The strain of G. oxydans that we used was able to oxidize both anomers of glucose at the same rate; there was therefore no need for mutarotase co-immobilization in disaccharide-sensing membranes. The sensitivity of glucose sensor was 50 nA/mM, the range of the calibration curve was 0-0.8 mM, the response time was 2 min, and the response after 1 week of storage was 62% of the initial response. The parameters of the disaccharide sensors were similar: linear range of calibration curve up to 4 mM, response time 5 min. The activities of the sensors after 1 week of storage at ambient temperature were in the range 50-65% of the initial activity.

1H NMR ganglioside ceramide resonance region on the differential diagnosis of low and high malignancy of brain gliomas.

1. The high-resolution 1H NMR (MRS) spectra of human brain tumor homogenates revealed a broad resonance at 5.3-5.4 ppm in glioblastoma multiforme (N = 16) and brain metastases (N = 3). The broad resonance was identified as ceramide, a sphingosine-fatty acid combination portion of ganglioside, indicating an elevated abundance of monounsaturated fatty acids. GLC analysis of gangliosides in the highly malignant glioblastoma multiforme revealed that the elevated monounsaturated fatty acid is oleic acid (C18:1). The resonance at 5.3-5.4 ppm region was not detectable in normal human brain (N = 2), in meningiomas (N = 2), or in low-grade astrocytomas (N = 12). In normal human brain the abundance of monounsaturated fatty acid is minimal. 2. This investigation was made possible because the method of producing homogenate resulted in (i) no loss of lipids during the process and (ii) a well-homogenised sample, with (iii) no loss in chemical integrity. 3. The properties of tumor gangliosides include antigenic specificity and immunosuppressive activity and the ceramide, a sphingosine-fatty acid combination, noticeably influences the ganglioside immunosuppressive activity. 4. The observation of 1H NMR ceramide resonance in high-malignant brain tumors emphasizes the dramatic role of aberant gangliosides and ceramide precursors on the grade of malignancy and invasiveness. 5. Further insight into the specific nature of the ceramide portion of gangliosides in grading the malignancy of brain tumors should be investigated further.