Nonvolatile Reconfigurable Logic Device Based on Photoinduced Interfacial Charge Trapping in van der Waals Gap.

Due to the increasing complexity in miniaturization of electronic devices, reconfigurable field-effect transistors (RFETs) have emerged as a solution. Although the foundational concepts of RFETs have matured over two decades, ongoing breakthroughs are needed to address challenges such as improving the device performance as well as achieving balanced symmetry between n-type and p-type transport modes with long-term stability. Herein, we present a nonvolatile WSe2-based RFET that utilizes photoassisted interfacial charge trapping at the h-BN and SiO2 interface. Unlike typical RFETs with two gate electrodes, our RFETs achieved polarity control with a single operating gate activated exclusively under white-light exposure. The threshold voltage was tunable, ranging from 27.4 (-31.6 V) to 0.9 (+19.5 V), allowing selective activation of n-type (p-type) operation at VGS = 0 V. Additionally, our WSe2-based RFETs show superior repeatability and long-term stability. Leveraging these advantages, various reconfigurable logic circuits were successfully demonstrated, including complementary inverters and switch circuits as well as pull-up and pull-down circuits, highlighting the potential of WSe2 FETs for future advancements of integrated circuits.

A Mixture of Negative-, Zero-, and Positive-Differential Transconductance Switching from Tellurium/Indium Gallium Zinc Oxide Heterostructures.

Conventional transistors have long emphasized signal modulation and amplification, often sidelining polarity considerations. However, the recent emergence of negative differential transconductance, characterized by a drain current decline during gate voltage sweeping, has illuminated an unconventional path in transistor technology. This phenomenon promises to simplify the implementation of ternary logic circuits and enhance energy efficiency, especially in multivalued logic applications. Our research has culminated in the development of a sophisticated mixed transconductance transistor (M-T device) founded on a precise Te and IGZO heterojunction. The M-T device exhibits a sequence of intriguing phenomena, zero differential transconductance (ZDT), positive differential transconductance (PDT), and negative differential transconductance (NDT) contingent on applied gate voltage. We clarify its operation using a three-segment equivalent circuit model and validate its viability with IGZO TFT, Te TFT, and Te/IGZO TFT components. In a concluding demonstration, the M-T device interconnected with Te TFT achieves a ternary inverter with an intermediate logic state. Remarkably, this configuration seamlessly transitions into a binary inverter when it is exposed to light.

Strengthening Multi-Factor Authentication Through Physically Unclonable Functions in PVDF-HFP-Phase-Dependent a-IGZO Thin-Film Transistors.

For enhanced security in hardware-based security devices, it is essential to extract various independent characteristics from a single device to generate multiple keys based on specific values. Additionally, the secure destruction of authentication information is crucial for the integrity of the data. Doped amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) using poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) induce a dipole doping effect through a phase-transition process, creating physically unclonable function (PUF) devices for secure user information protection. The PUF security key, generated at VGS = 20 V in a 20 × 10 grid, demonstrates uniformity of 42% and inter-Hamming distance (inter-HD) of 49.79% in the ß-phase of PVDF-HFP. However, in the γ-phase, the uniformity drops to 22.5%, and inter-HD decreases to 35.74%, indicating potential security key destruction during the phase transition. To enhance security, a multi-factor authentication (MFA) system is integrated, utilizing five security keys extracted from various TFT parameters. The security keys from turn-on voltage (VON), VGS = 20 V, VGS = 30 V, mobility, and threshold voltage (Vth) exhibit near-ideal uniformities and inter-HDs, with the highest values of 58% and 51.68%, respectively. The dual security system, combining phase transition and MFA, establishes a robust protection mechanism for privacy-sensitive user information.

Highly parallel and ultra-low-power probabilistic reasoning with programmable gaussian-like memory transistors.

Probabilistic inference in data-driven models is promising for predicting outputs and associated confidence levels, alleviating risks arising from overconfidence. However, implementing complex computations with minimal devices still remains challenging. Here, utilizing a heterojunction of p- and n-type semiconductors coupled with separate floating-gate configuration, a Gaussian-like memory transistor is proposed, where a programmable Gaussian-like current-voltage response is achieved within a single device. A separate floating-gate structure allows for exquisite control of the Gaussian-like current output to a significant extent through simple programming, with an over 10000 s retention performance and mechanical flexibility. This enables physical evaluation of complex distribution functions with the simplified circuit design and higher parallelism. Successful implementation for localization and obstacle avoidance tasks is demonstrated using Gaussian-like curves produced from Gaussian-like memory transistor. With its ultralow-power consumption, simplified design, and programmable Gaussian-like outputs, our 3-terminal Gaussian-like memory transistor holds potential as a hardware platform for probabilistic inference computing.

Imitating Synapse Behavior: Exploiting Off-Current in TPBi-Doped Small Molecule Phototransistors for Broadband Wavelength Recognition.

Phototransistors have gained significant attention in diverse applications such as photodetectors, image sensors, and neuromorphic devices due to their ability to control electrical characteristics through photoresponse. The choice of photoactive materials in phototransistor research significantly impacts its development. In this study, we propose a novel device that emulates artificial synaptic behavior by leveraging the off-current of a phototransistor. We utilize a p-type organic semiconductor, dinaphtho[2,3-b:2',3'- f]thieno[3,2-b]thiophene (DNTT), as the channel material and dope it with the organic semiconductor 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) on the DNTT transistor. Under light illumination, the general DNTT transistor shows no change in off-current, except at 400 nm wavelength, whereas the TPBi-doped DNTT phototransistor exhibits increased off-current across all wavelength bands. Notably, DNTT phototransistors demonstrate broad photoresponse characteristics in the wavelength range of 400-1000 nm. We successfully simulate artificial synaptic behavior by differentiating the level of off-current and achieving a recognition rate of over 70% across all wavelength bands.

355 nm Nanosecond Ultraviolet Pulsed Laser Annealing Effects on Amorphous In-Ga-ZnO Thin Film Transistors.

Bottom-gate thin-film transistors (TFTs) with n-type amorphous indium-gallium-zinc oxide (a-IGZO) active channels and indium-tin oxide (ITO) source/drain electrodes were fabricated. Then, an ultraviolet (UV) nanosecond pulsed laser with a wavelength of 355 nm was scanned to locally anneal the active channel at various laser powers. After laser annealing, negative shifts in the threshold voltages and enhanced on-currents were observed at laser powers ranging from 54 to 120 mW. The energy band gap and work function of a-IGZO extracted from the transmittance and ultraviolet photoelectron spectroscopy (UPS) measurement data confirm that different energy band structures for the ITO electrode/a-IGZO channel were established depending on the laser annealing conditions. Based on these observations, the electron injection mechanism from ITO electrodes to a-IGZO channels was analyzed. The results show that the selective laser annealing process can improve the electrical performance of the a-IGZO TFTs without any thermal damage to the substrate.

Split-Gate: Harnessing Gate Modulation Power in Thin-Film Electronics.

With the increase in electronic devices across various applications, there is rising demand for selective carrier control. The split-gate consists of a gate electrode divided into multiple parts, allowing for the independent biasing of electric fields within the device. This configuration enables the potential formation of both p- and n-channels by injecting holes and electrons owing to the presence of the two gate electrodes. Applying voltage to the split-gate allows for the control of the Fermi level and, consequently, the barrier height in the device. This facilitates band bending in unipolar transistors and allows ambipolar transistors to operate as if unipolar. Moreover, the split-gate serves as a revolutionary tool to modulate the contact resistance by controlling the barrier height. This approach enables the precise control of the device by biasing the partial electric field without limitations on materials, making it adaptable for various applications, as reported in various types of research. However, the gap length between gates can affect the injection of the electric field for the precise control of carriers. Hence, the design of the gap length is a critical element for the split-gate structure. The primary investigation in this review is the introduction of split-gate technology applied in various applications by using diverse materials, the methods for forming the split-gate in each device, and the operational mechanisms under applied voltage conditions.

Light-Triggerable and Gate-Tunable Negative Differential Resistance in Small Molecules Heterojunction.

Negative differential resistance (NDR), a phenomenon in which the current decreases when the applied voltage is increased, is attracting attention as a unique electrical property. Here, we propose a broad spectral photo/gate cotunable channel switching NDR (CS-NDR) device. The proposed CS-NDR device has superior linear gate-tunable NDR behavior and highly reproducible properties compared to the previously reported NDR devices, as the fundamental mechanism of the CS-NDR device is directly related to a charge transport channel switching by the linear increase of the applied drain voltage. We also experimentally demonstrate that the photoinduced NDR behavior of the CS-NDR device was derived from the grain boundaries of dinaphtho[2;3-b:2',3'-f]-thieno[3,2-b]thiophene. Furthermore, this work produces a 9 × 9 CS-NDR device array composed of 81 devices, providing the reproducibility and uniformity of the CS-NDR device. Finally, we successfully demonstrate the detection of text images with 81 CS-NDR devices using the proposed photo/gate cotunable NDR behavior.

Overcoming Downscaling Limitations in Organic Semiconductors: Strategies and Progress.

Organic semiconductors have great potential to revolutionize electronics by enabling flexible and eco-friendly manufacturing of electronic devices on plastic film substrates. Recent research and development led to the creation of printed displays, radio-frequency identification tags, smart labels, and sensors based on organic electronics. Over the last 3 decades, significant progress has been made in realizing electronic devices with unprecedented features, such as wearable sensors, disposable electronics, and foldable displays, through the exploitation of desirable characteristics in organic electronics. Neverthless, the down-scalability of organic electronic devices remains a crucial consideration. To address this, efforts are extensively explored. It is of utmost importance to further develop these alternative patterning methods to overcome the downscaling challenge. This review comprehensively discusses the efforts and strategies aimed at overcoming the limitations of downscaling in organic semiconductors, with a particular focus on four main areas: 1) lithography-compatible organic semiconductors, 2) fine patterning of printing methods, 3) organic material deposition on pre-fabricated devices, and 4) vertical-channeled organic electronics. By discussing these areas, the full potential of organic semiconductors can be unlocked, and the field of flexible and sustainable electronics can be advanced.

Contributions of Light to Novel Logic Concepts Using Optoelectronic Materials.

Instead of the current method of transmitting voltage or current signals in electronic circuit operation, light offers an alternative to conventional logic, allowing for the implementation of new logic concepts through interaction with light. This manuscript examines the use of light in implementing new logic concepts as an alternative to traditional logic circuits and as a future technology. This article provides an overview of how to implement logic operations using light rather than voltage or current signals using optoelectronic materials such as 2D materials, metal-oxides, carbon structures, polymers, small molecules, and perovskites. This review covers the various technologies and applications of using light to dope devices, implement logic gates, control logic circuits, and generate light as an output signal. Recent research on logic and the use of light to implement new functions is summarized. This review also highlights the potential of optoelectronic logic for future technological advancements.

Analyses of All Small Molecule-Based Pentacene/C60 Organic Photodiodes Using Vacuum Evaporation Method.

The vacuum process using small molecule-based organic materials to make organic photodiodes (OPDIs) will provide many promising features, such as well-defined molecular structure, large scalability, process repeatability, and good compatibility for CMOS integration, compared to the widely used Solution process. We present the performance of planar heterojunction OPDIs based on pentacene as the electron donor and C60 as the electron acceptor. In these devices, MoO3 and BCP interfacial layers were interlaced between the electrodes and the active layer as the electron- and hole-blocking layer, respectively. Typically, BCP played a good role in suppressing the dark current by two orders higher than that without that layer. These devices showed a significant dependence of the performance on the thickness of the pentacene. In particular, with the pentacene thickness of 25 nm, an external quantum efficiency at the 360 nm wavelength according to the peak absorption of C60 was enhanced by 1.5 times due to a cavity effect, compared to that of the non-cavity device. This work shows the importance of a vacuum processing approach based on small molecules for OPDIs, and the possibility of improving the performance via the optimization of the device architecture.

Self-Assembled Monolayer Doping for MoTe2 Field-Effect Transistors: Overcoming PN Doping Challenges in Transition Metal Dichalcogenides.

Transition metal dichalcogenides (TMDs) have gained significant attention as next-generation semiconductor materials that could potentially overcome the integration limits of silicon-based electronic devices. However, a challenge in utilizing TMDs as semiconductors is the lack of an established PN doping method to effectively control their electrical properties, unlike those of silicon-based semiconductors. Conventional PN doping methods, such as ion implantation, can induce lattice damage in TMDs. Thus, chemical doping methods that can control the Schottky barrier while minimizing lattice damage are desirable. Here, we focus on the molybdenum ditelluride (2H-MoTe2), which has a hexagonal phase and exhibits ambipolar field-effect transistor (FET) properties due to its direct band gap of 1.1 eV, enabling concurrent transport of electrons and holes. We demonstrate the fabrication of p- or n-type unipolar FETs in ambipolar MoTe2 FETs using self-assembled monolayers (SAMs) as chemical dopants. Specifically, we employ 1H,1H,2H,2H perfluorooctyltriethoxysilane and (3-aminopropyl)triethoxysilane as SAMs for chemical doping. The selective SAMs effectively increase the hole and electron charge transport capabilities in MoTe2 FETs by 18.4- and 4.6-fold, respectively, due to the dipole effect of the SAMs. Furthermore, the Raman shift of MoTe2 by SAM coating confirms the successful p- and n-type doping. Finally, we demonstrate the fabrication of complementary inverters using SAMs-doped MoTe2 FETs, which exhibit clear full-swing capability compared to undoped complementary inverters.

Machine Learning Attacks-Resistant Security by Mixed-Assembled Layers-Inserted Graphene Physically Unclonable Function.

Mixed layers of octadecyltrichlorosilane (ODTS) and 1H,1H,2H,2H-perfluorooctyltriethoxysilane (FOTS) on an active layer of graphene are used to induce a disordered doping state and form a robust defense system against machine-learning attacks (ML attacks). The resulting security key is formed from a 12 × 12 array of currents produced at a low voltage of 100 mV. The uniformity and inter-Hamming distance (HD) of the security key are 50.0 ± 12.3% and 45.5 ± 16.7%, respectively, indicating higher security performance than other graphene-based security keys. Raman spectroscopy confirmed the uniqueness of the 10,000 points, with the degree of shift of the G peak distinguishing the number of carriers. The resulting defense system has a 10.33% ML attack accuracy, while a FOTS-inserted graphene device is easily predictable with a 44.81% ML attack accuracy.

Argon and Oxygen Gas Flow Rate Dependency of Sputtering-Based Indium-Gallium-Zinc Oxide Thin-Film Transistors.

Oxygen vacancies are a major factor that controls the electrical characteristics of the amorphous indium-gallium-zinc oxide transistor (a-IGZO TFT). Oxygen vacancies are affected by the composition ratio of the a-IGZO target and the injected oxygen flow rate. In this study, we fabricated three types of a-IGZO TFTs with different oxygen flow rates and then investigated changes in electrical characteristics. Atomic force microscopy (AFM) was performed to analyze the surface morphology of the a-IGZO films according to the oxygen gas rate. Furthermore, X-ray photoelectron spectroscopy (XPS) analysis was performed to confirm changes in oxygen vacancies of a-IGZO films. The optimized a-IGZO TFT has enhanced electrical characteristics such as carrier mobility (µ) of 12.3 cm2/V·s, on/off ratio of 1.25 × 1010 A/A, subthreshold swing (S.S.) of 3.7 V/dec, and turn-on voltage (Vto) of -3 V. As a result, the optimized a-IGZO TFT has improved electrical characteristics with oxygen vacancies having the highest conductivity.

Interconnection Technologies for Flexible Electronics: Materials, Fabrications, and Applications.

Flexible electronic devices require metal interconnects to facilitate the flow of electrical signals among the device components, ensuring its proper functionality. There are multiple factors to consider when designing metal interconnects for flexible electronics, including their conductivity, flexibility, reliability, and cost. This article provides an overview of recent endeavors to create flexible electronic devices through different metal interconnect approaches, with a focus on materials and structural aspects. Additionally, the article discusses emerging flexible applications, such as e-textiles and flexible batteries, as essential considerations.

A reconfigurable binary/ternary logic conversion-in-memory based on drain-aligned floating-gate heterojunction transistors.

A new type of heterojunction non-volatile memory transistor (H-MTR) has been developed, in which the negative transconductance (NTC) characteristics can be controlled systematically by a drain-aligned floating gate. In the H-MTR, a reliable transition between N-shaped transfer curves with distinct NTC and monolithically current-increasing transfer curves without apparent NTC can be accomplished through programming operation. Based on the H-MTR, a binary/ternary reconfigurable logic inverter (R-inverter) has been successfully implemented, which showed an unprecedentedly high static noise margin of 85% for binary logic operation and 59% for ternary logic operation, as well as long-term stability and outstanding cycle endurance. Furthermore, a ternary/binary dynamic logic conversion-in-memory has been demonstrated using a serially-connected R-inverter chain. The ternary/binary dynamic logic conversion-in-memory could generate three different output logic sequences for the same input signal in three logic levels, which is a new logic computing method that has never been presented before.

Nanoscale Channel Gate-Tunable Diodes Obtained by Asymmetric Contact and Adhesion Lithography on Fluoropolymers.

Adhesion lithography offers to fabrication of coplanar asymmetric nanogap electrodes with a low-cost and facile process. In this study, a gate-tunable diode with coplanar asymmetric nanogap is fabricated using adhesion lithography. A fluoropolymer material is introduced to the adhesion lithography process to ensure a manufacturing patterning process yield as high as 96.7%. The asymmetric electrodes formed a built-in potential, leading to rectifying behavior. The coplanar electrode structure allowed the use of a gate electrode in vertical contact with the channel, resulting in gate-tunable diode characteristics. The nanoscale channel induced a high current density (3.38 × 10-7  A∙cm-1 ), providing a high rectification ratio (1.67 × 105  A∙A-1 ). This rectifier diode is confirmed to operate with pulsed input signals and suggests the gate-tunability of nanogap diodes.

Photogating Effect-Driven Photodetectors and Their Emerging Applications.

Rather than generating a photocurrent through photo-excited carriers by the photoelectric effect, the photogating effect enables us to detect sub-bandgap rays. The photogating effect is caused by trapped photo-induced charges that modulate the potential energy of the semiconductor/dielectric interface, where these trapped charges contribute an additional electrical gating-field, resulting in a shift in the threshold voltage. This approach clearly separates the drain current in dark versus bright exposures. In this review, we discuss the photogating effect-driven photodetectors with respect to emerging optoelectrical materials, device structures, and mechanisms. Representative examples that reported the photogating effect-based sub-bandgap photodetection are revisited. Furthermore, emerging applications using these photogating effects are highlighted. The potential and challenging aspects of next-generation photodetector devices are presented with an emphasis on the photogating effect.

Combination of Polymer Gate Dielectric and Two-Dimensional Semiconductor for Emerging Field-Effect Transistors.

Two-dimensional (2D) materials are considered attractive semiconducting layers for emerging field-effect transistors owing to their unique electronic and optoelectronic properties. Polymers have been utilized in combination with 2D semiconductors as gate dielectric layers in field-effect transistors (FETs). Despite their distinctive advantages, the applicability of polymer gate dielectric materials for 2D semiconductor FETs has rarely been discussed in a comprehensive manner. Therefore, this paper reviews recent progress relating to 2D semiconductor FETs based on a wide range of polymeric gate dielectric materials, including (1) solution-based polymer dielectrics, (2) vacuum-deposited polymer dielectrics, (3) ferroelectric polymers, and (4) ion gels. Exploiting appropriate materials and corresponding processes, polymer gate dielectrics have enhanced the performance of 2D semiconductor FETs and enabled the development of versatile device structures in energy-efficient ways. Furthermore, FET-based functional electronic devices, such as flash memory devices, photodetectors, ferroelectric memory devices, and flexible electronics, are highlighted in this review. This paper also outlines challenges and opportunities in order to help develop high-performance FETs based on 2D semiconductors and polymer gate dielectrics and realize their practical applications.

Disordered Mixture of Self-Assembled Molecular Functional Groups on Heterointerfaces with p-Si Leads to Multiple Key Generation in Physical Unclonable Functions.

Physical unclonable function (PUF) security devices based on hardware are becoming an effective strategy to overcome the dependency of the internet cloud and software-based hacking vulnerabilities. On the other hand, existing Si-based artificial security devices have several issues, including the absence of a method for multiple key generation, complex and expensive fabrication processes, and easy prediction compared to devices retaining natural randomness. Herein, to generate unique and unpredictable multiple security keys, this paper proposes novel PUF devices consisting of a disordered random mixture of two self-assembled monolayers (SAMs) formed onto p-type Si. The proposed PUF devices exhibited multikeys at different voltage biasing, including 0 V, through the arbitrary dipole effect. As a result, multiple unpredictable hardware security keys were generated from one device using a simple solution-coating process. The PUF security device based on the mixture of materials with different dipoles developed in this study can provide valuable insights for implementing various PUF devices in the future.