Trueness, physical properties, and surface characteristics of additive-manufactured zirconia crown.

OBJECTIVE: This study aimed to conduct a comparison of trueness and physical and surface properties among five distinct types of additive manufactured (AM) zirconia crowns and zirconia crowns produced using the subtractive manufacturing (SM). MATERIAL AND METHODS: Zirconia crowns were fabricated using five distinct techniques, each varying in the method of slurry transfer and photocuring source. Each experimental group utilized either one of the four digital light processing (DLP)-based techniques (DLP spreading, DLP spreading gradation, DLP vat and DLP circular spreading) or the stereolithography (SLA)-based technique (SLA spreading). The control (CON) group employed SM. To assess accuracy, trueness was measured between the scan and reference data. To analyze the physical properties, voids were examined using high-energy spiral micro-computed tomography scans, and the crystal structure analysis was performed using X-ray diffraction (XRD). Surface roughness was assessed through laser scanning microscopy. RESULTS: Differences in the trueness of internal surfaces of crowns were found among the groups (P < 0.05). Trueness varied across the measurement surfaces (occlusal, lateral, and marginal) in all the groups except for the DLP spreading gradation group (P < 0.05). Voids were observed in all AM groups. All groups showed similar XRD patterns. All AM groups showed significantly greater surface roughness compared to the CON group (P < 0.001). CONCLUSION: The AM zirconia crowns showed bubbles and a rougher surface compared to the SM crowns. All groups exhibited typical zirconia traits and trueness levels within clinically acceptable limits, suggesting that current zirconia AM techniques could be suitable for dental applications.

Multicomponent Intervention on Improving the Cognitive Ability of Older Adults with Mild Cognitive Impairment: A Pilot Randomized Controlled Trial.

This pilot randomized controlled trial aimed to evaluate the feasibility and potential outcomes of an innovative 16-session multicomponent intervention model to improve cognitive abilities in older adults with mild cognitive impairment (MCI) by promoting healthy lifestyle, cognitive skills, tai chi and mindfulness practices. This study was a multicentre, randomized controlled, two-arm, parallel-group, unblinded trial in Hong Kong. 57 Chinese older adults with MCI recruited from three local elderly centers were randomly assigned to either the control or intervention group. The study results support the feasibility and efficacy of the multicomponent intervention, and recommend future larger-scale randomized control trials.

Shear bond strength of dual-cured resin cements on zirconia: The light-blocking effect of a zirconia crown.

Abstract Background/purpose: The presence of restorative material between resin cement and the light-curing unit can reduce light transmission. This study aimed to evaluate the effect of the light-blocking effect of zirconia crown on shear bond strength (SBS) between three dual-cured resin cements and the zirconia surface. Materials and methods: Sixty zirconia specimens were prepared and divided into three groups according to the type of resin cement [RXU (RelyX Ultimate); SC2 (SmartCem2); MEC (Maxcem Elite Chroma)]. Each group was further divided into two subgroups, with or without a 1-mm-thick zirconia crown (n = 10). The specimens were light-cured from five different directions for 20 s each. All specimens were thermocycled 5000 times and subjected to SBS testing, followed by scanning electron microscope examination. Results: The presence of a 1-mm-thick zirconia crown had no significant effect on the SBS in all resin cements. However, the SBS was significantly affected by type of resin cement. RXU showed the highest SBS (8.35 MPa with crown; 8.57 MPa without crown), followed by SC2 (5.48 MPa with crown; 5.57 without crown) and then MEC (3.37 MPa with crown; 4.04 MPa without crown. Fractured surfaces exhibited varying degrees of mixed failure patterns. Conclusion: A 1-mm-thick zirconia crown material between the light source and the dual-cured resin cement did not significantly influence the SBS of the resin cements on the zirconia substrates. RXU exhibited the highest SBS regardless of zirconia crown coverage. With sufficient light-curing, dual-cured resin cements can be a good choice for zirconia crown cementation.

Increased off-target binding of [18F]florbetaben in the skull of women with reduced skull density.

AIM: To investigate the relationship between off-target binding of the amyloid tracer [18F]florbetaben (FBB) in the skull and skull density. METHODS: Forty-three consecutive patients were included retrospectively (age 70.2±7.5y, 42% females, 65% amyloid-positive). For each patient, CT skull density (in Hounsfield units) and (late) FBB uptake in the skull were obtained using an individual skull mask generated by warping the skull tissue probability map provided by the statistical parametric mapping software package (version SPM12) to the native patient space. Skull FBB uptake (mean of the 10% hottest voxels) was scaled to the individual median FBB uptake in the pons. The association between skull FBB uptake and skull density was tested by correlation analyses. Univariate analysis of variance (ANOVA) of skull FBB uptake with dichotomized skull density (low: ≤ median, high), sex (female, male) and amyloid-status (positive, negative) as between-subjects factors was used to assess the impact of sex and amyloid status. RESULTS: There was a significant inverse correlation between skull FBB uptake and skull density (Pearson correlation coefficient -0.518, p < 0.001; Spearman rho -0.321, p = 0.036). The ANOVA confirmed the bone density effect on the FBB uptake in the skull (p = 0.019). In addition, sex (p = 0.012) and density*sex interaction (p = 0.016) had a significant impact. Skull FBB uptake was significantly higher in females with low skull density than for all other combinations of sex and skull density. Amyloid status did not reach statistical significance (p = 0.092). CONCLUSION: Off-target binding of FBB in the skull is inversely associated with skull density. The relationship is mainly driven by females. Amyloid status does not have a major impact on skull FBB binding.

Thiazol-4(5H)-one analogs as potent tyrosinase inhibitors: Synthesis, tyrosinase inhibition, antimelanogenic effect, antioxidant activity, and in silico docking simulation.

As the ß-phenyl-α,ß-unsaturated carbonyl (PUSC) structure was previously identified to play a key role in tyrosinase inhibition, 14 analogs with a PUSC structure built on a thiazol-4(5H)-one scaffold were synthesized using Knoevenagel condensation to serve as potential tyrosinase inhibitors. Through mushroom tyrosinase inhibition experiments, two analogs 9 and 11 were identified as potent tyrosinase inhibitors, with 11 exhibiting an IC50 value of 0.4 ± 0.01 µM, which indicates its 26-fold greater potency than kojic acid. Kinetic studies using Lineweaver-Burk plots revealed that 9 and 11 are competitive and mixed-type inhibitors, respectively; these kinetic results were supported by docking simulations. According to the B16F10 cell-based experiments, 9 and 11 inhibited melanogenesis more effectively than kojic acid due to their potent cellular tyrosinase inhibitory activity. In addition, analogs 9 and 11 exhibited moderate-to-strong antioxidant capacity, scavenging ABTS+, DPPH, and ROS radicals. In particular, analog 12 with a catechol moiety exhibited very strong ROS-scavenging activity, similar to Trolox. These results suggest that analogs 9 and 11, which exhibit potent tyrosinase inhibitory activity in mushroom and mammalian cells and anti-melanogenic effects in B16F10 cells, are promising antibrowning agents for crops and skin lightening agents for hyperpigmentation-related diseases.

Ultrasonic processing of WO3 nanosheets integrated Ti3C2 MXene 2D-2D based heterojunctions with synergistic effects for enhanced water splitting and environmental remediation.

This article describes a straightforward chemical procedure that involves hydrothermal and ultrasonic treatments to create a new 2D/2D ultrathin WO3/Ti3C2 heterojunctions. The features of the fabricated heterojunctions were characterized and examined by field emission electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), optical absorption spectroscopy (UV-Vis). By photodegrading an organic dye under the influence of visible light, the photocatalytic degradation capabilities of the heterojunctions were also investigated. The performance of WO3/Ti3C2 was superior to that of bare WO3, with a removal rate of 94% and a kinetic rate constant (k) that was approximately 3 times that of WO3. The creation of 2D/2D heterojunction was observed to encourage the spatial charge separation and increase the surface reactive sites, to result with the increased photocatalytic activity in WO3/Ti3C2 heterojunction. The photocurrent values discovered through photoelectrochemical studies further indicated Ti3C2's active function in enhancing water-splitting performance. The impedance analysis examined by an electrochemical method revealed that heterojunctions might be helpful in accelerating the migration of charges quickly to get the outcomes seen.

A Pilot Randomized Controlled Trial Among People Recovering from Mental Illness: A Tailored Mindfulness-Based Intervention versus Relaxation Training.

BACKGROUND: This study assessed the potential effectiveness, acceptability and feasibility of a tailored mindfulness-based intervention (MBI, REMIND 2.0) for personal recovery among people with mental illness during the COVID-19 pandemic. METHODS: In this pilot mixed methods randomized controlled trial, participants were assigned to either the MBI (n = 14) or the relaxation training (RT) (n = 14). Quantitative measures were used to assess primary outcomes, including personal recovery, mindfulness, self-compassion, resilience, and secondary outcomes, including depression, stress, anxiety, positive and negative moods, quality of life and general health at baseline (T0), post-intervention (T1) and one-month follow-up (T2). Quantitative interviews were conducted to explore the experiences and perceptions toward the MBI. RESULTS: Results indicated significant group and time interactions for all outcomes except anxiety and stress. MBI participants showed significant improvements in all outcomes at T1, which were maintained at T2, except for positive mood. RT participants showed a significant decline in resilience but significant improvements in all secondary outcomes at T1, but all outcomes significantly declined at T2, except for anxiety and stress. MBI participants were receptive toward the programme in all aspects of personal recovery. CONCLUSIONS: The tailored MBI is a potentially effective, feasible and acceptable approach to facilitate personal recovery among people with mental illness. Differences between MBI and RT are discussed.

Augmented Decision-Making in wound Care: Evaluating the clinical utility of a Deep-Learning model for pressure injury staging.

BACKGROUND: Precise categorization of pressure injury (PI) stages is critical in determining the appropriate treatment for wound care. However, the expertise necessary for PI staging is frequently unavailable in residential care settings. OBJECTIVE: This study aimed to develop a convolutional neural network (CNN) model for classifying PIs and investigate whether its implementation can allow physicians to make better decisions for PI staging. METHODS: Using 3,098 clinical images (2,614 and 484 from internal and external datasets, respectively), a CNN was trained and validated to classify PIs and other related dermatoses. A two-part survey was conducted with 24 dermatology residents, ward nurses, and medical students to determine whether the implementation of the CNN improved initial PI classification decisions. RESULTS: The top-1 accuracy of the model was 0.793 (95% confidence interval [CI], 0.778-0.808) and 0.717 (95% CI, 0.676-0.758) over the internal and external testing sets, respectively. The accuracy of PI staging among participants was 0.501 (95% CI, 0.487-0.515) in Part I, improving by 17.1% to 0.672 (95% CI, 0.660-0.684) in Part II. Furthermore, the concordance between participants increased significantly with the use of the CNN model, with Fleiss' κ of 0.414 (95% CI, 0.410-0.417) and 0.641 (95% CI, 0.638-0.644) in Parts I and II, respectively. CONCLUSIONS: The proposed CNN model can help classify PIs and relevant dermatoses. In addition, augmented decision-making can improve consultation accuracy while ensuring concordance between the clinical decisions made by a diverse group of health professionals.

Geriatric Oncology in the Instagram Era: Feasibility and Acceptability Randomised Controlled Trial on Adopting PhotoVoice to Enable Empowerment, Patient-Centred Care, and Shared Decision Making-Study Protocol.

Geriatric assessment (GA) is fundamental to optimising cancer care in older adults, yet implementing comprehensive GA tools in real-world clinical settings remains a challenge. This study aims to assess the feasibility and acceptability of integrating information from patient-derived photographs (PhotoVoice) into enhanced supportive care (ESC) for older adults with cancer. A feasibility randomised controlled trial will be conducted at a regional cancer care centre in Australia. Participants aged 70 and above will be randomised into two groups: PhotoVoice plus ESC or usual care (ESC) alone. In the PhotoVoice group, participants will provide four photographs for deduction of representations of different aspects of their lives using photo-elicitation techniques. ESC will be conducted for both groups, incorporating PhotoVoice analysis in the intervention group. PhotoVoice may improve patient-centred care outcomes, including enhanced communication, shared decision making, and identification of patient priorities and barriers. Findings will provide insights into implementing PhotoVoice in geriatric assessment and guide future trials in cancer among older adults.

Synergistic effect of Polydopamine incorporated Copper electrocatalyst by dopamine oxidation for efficient hydrogen production.

Tuning the metal-support interaction in electrocatalysts has been proposed as a viable method for manipulating the electronic structure and catalytic activity. In this work, inspired by natural hydrogenase enzyme, electrocatalysts with a hybrid metal-matrix complex using polydopamine (PDA) as a supporting matrix were synthesized for efficient green hydrogen production. Among the various Metal-PDA electrocatalysts, Cu-PDA shows outstanding catalytic activity (low overpotential (ƞ) of 104 mV at 10 mA cm-2 and small Tafel slope of 60.67 mV dec-1) with high stability at neutral pH. Also, the electrochemical impedance spectroscopy analysis verified the fast charge transfer properties of Cu-PDA (2.8 Ω cm2) than PDA (26 Ω cm2), indicating a faster proton-coupled electron transfer process in Cu-PDA electrocatalyst. Therefore, emerging nature inspired organic ligand-transition metal ion complexes can be extensively encouraged as a prospective HER electrocatalyst under neutral conditions.

Survival rates for invasive cutaneous malignant melanoma in South Korea in accordance with the Eighth edition AJCC Cancer Staging Manual: A retrospective single center study.

Background Cutaneous malignant melanoma is known to have a poorer prognosis in Asian patients as compared to Caucasians. Few studies have analysed the overall survival rate (OS) and melanoma-specific survival rate (MSS) of patients with cutaneous malignant melanoma in South Korea. Aim This study aims to analyse the OS, MSS and prognostic factors of patients with invasive cutaneous malignant melanoma in South Korea. Methods The medical records of patients diagnosed with invasive cutaneous malignant melanoma from July 2006 to June 2016 at Kyungpook National University Hospital were reviewed retrospectively. The OS/MSS of these patients were calculated in accordance with the Eighth American Joint Committee on Center staging system and the prognostic factors affecting MSS were analysed. Results A total of 202 patients with a mean age of 61.5 years were included. The 5-year OS/MSS was 64.4%/70.7% in the patients. The 5-year OS/MSS was 94.7%/97.1% for stage I, 67.2%/76.3% for stage II, 54.4%/59.1% for stage III, and 0%/0% for stage IV. On univariate analysis, the age, sex, Breslow thickness, ulceration, microsatellites, satellites, locally recurrent or in-transit metastasis, tumour metastasis in sentinel lymph nodes and clinicopathological stage were all significantly associated with the MSS, but not with acral distribution or BRAF mutation status. However, on multivariate analysis only the Breslow thickness, ulceration and stage IV were significantly associated with the MSS. Limitations This study was conducted retrospectively in a relatively small number of patients at a single tertiary center in South Korea. Conclusions The OS/MSS of patients with invasive cutaneous malignant melanoma in South Korea was lower than those in Caucasians. In addition to the Breslow thickness and ulceration, the impact of tumour location and sentinel nodal metastasis on cutaneous malignant melanoma should be reevaluated to better understand the disease prognosis in these patients.

Anti-tyrosinase flavone derivatives and their anti-melanogenic activities: Importance of the ß-phenyl-α,ß-unsaturated carbonyl scaffold.

Flavone derivatives were designed and synthesized based on the hypothesis that flavones containing the ß-phenyl-α,ß-unsaturated carbonyl (PUSC) scaffold have potential anti-tyrosinase activity. Flavones 1a and 1e inhibited mushroom tyrosinase more potently than kojic acid, and 1e inhibited monophenolase and diphenolase 61- and 28-fold more than kojic acid, respectively. Kinetic studies on mushroom tyrosinase indicated that 1a and 1e competitively inhibit monophenolase and diphenolase, and docking results supported these results. In an in vitro assay using B16F10 murine cells, 1a and 1e inhibited melanin production more potently than kojic acid, and this was attributed to the inhibition of tyrosinase. Furthermore, 1a and 1e strongly scavenged DPPH and ABTS radicals and ROS, which suggested that their antioxidant properties were at least partly responsible for their anti-melanogenic effects. Moreover, flavone 1a also inhibited the gene expressions of the melanogenesis-related genes tyrosinase, tyrosinase-related protein (TRP)-1, and TRP-2. Our findings that flavone derivatives (i) directly inhibit tyrosinase, (ii) act as antioxidants, and (iii) inhibit the expressions of melanogenesis-related genes suggest their potential use as natural melanogenesis inhibitors. Furthermore, the study confirms that the PUSC scaffold confers anti-tyrosinase activity.

Design and synthesis optimization of novel diimide indoles derivatives for ameliorating acute lung injury through modulation of NF-κB signaling pathway.

Acute lung injury (ALI) is a common respiratory disease caused by local or systemic inflammatory reaction. Based on the natural 7-chain diaryl anti-inflammatory framework, a series of diimide indoles derivatives were designed by combining curcumin and indole in this study. The synthesis of diimide compounds was extended using dichloromethane (DCM) as solvent and 1,1'-carbonyldiimidazole (CDI) and sodium hydride (NaH) as double activators, and a total of 40 diimide-indole derivatives were obtained. The results of in vitro anti-inflammatory activity showed that most compounds could inhibit the production of interleukin-6 (IL-6) better than curcumin and indomethacin. Among the compounds, the IC50 of compound 11f on IL-6 reached 1.05 µM with no obvious cytotoxic side effects. Mechanistically, compound 11f could block the expression of NF-κB P65 phosphorylation, and nuclear translocation of P65. The acute toxicity tests in-vivo also showed no obvious toxicity in mice after the intragastric administration of 1000 mg/kg. In addition, the compound 11f could significantly inhibit the LPS-induced inflammatory response in mice and reduce the number of neutrophils and wet/dry lung weight ratio, thereby alleviating ALI. These results indicated that the novel diimide indoles were promising anti-inflammatory agents for the treatment of ALI.

Elucidation of phenolic metabolites in wheat seedlings (Triticum aestivum L.) by NMR and HPLC-Q-Orbitrap-MS/MS: Changes in isolated phenolics and antioxidant effects through diverse growth times.

The current research was characterized on phenolic metabolite profile including six chemical structures (phenolic acid, luteolin, orientin, apigenin, isoscoparin, and tricin) in wheat seedlings using HPLC-Q-Orbitrap-MS/MS and NMR techniques. Our study was also was the first to demonstrate fluctuations of isolated nine phenolic contents and antioxidant properties in various cultivars of this species with different growth times. The antioxidant abilities differed significantly in the 80 % methanol extracts (600 µg/mL) according to cultivar and growth time, with the highest average activities (DPPH: 82 %; ABTS: 87 %) observed after 7 days. The isolated nine compositions exhibited considerable differences in cultivars and growth times, specifically, isoorientin (6) and isochaftoside (8) were observed the most abundant average contents (99.3; 64.3 mg/100 g), representing approximately 28.3 and 18.3 % (total content: 350.8 mg/100 g). Their total phenolics showed the highest rates (420.8 mg/100 g) at 7 days, followed by 9 â†’ 5 â†’ 12 â†’ 14 days with 374.6 â†’ 366.7 â†’ 350.7 â†’ 241.1 mg/100 g, as the rank orders of antioxidant effects. These findings suggest that wheat seedlings may be a potent source of functional agents.

Decision-Making and Health-Related Quality of Life in Patients with Melanoma Considering Adjuvant Immunotherapy.

BACKGROUND: Adjuvant anti-PD1 treatment improves relapse-free survival (RFS) but has not been shown to improve overall survival (OS) in melanoma and is associated with risks of immune-related adverse events (irAEs), some permanent. We identified factors patients consider in deciding whether to undergo adjuvant anti-PD1 treatment and assessed prospective health-related quality of life (HRQoL), treatment satisfaction, and decisional regret. PATIENTS AND METHODS: Patients with stage IIIB-IV cutaneous melanoma and free of disease, were candidates for adjuvant anti-PD1 immunotherapy, and had not yet discussed adjuvant treatment options with their oncologist were eligible. Participants viewed a 4-minute informational video tailored to their disease stage which communicated comprehensive, quantitative information about the risk of relapse both with and without adjuvant treatment, and risks of each irAE before deciding whether or not to opt for adjuvant therapy. We collected data on demographics, HRQoL, and attitudes toward adjuvant treatment over 1 year. RESULTS: 14/34 patients (41%) opted for adjuvant anti-PD1 immunotherapy, 20/34 (59%) opted for observation. Patients choosing adjuvant immunotherapy scored higher on HRQoL social well-being at pre-treatment, were more likely to endorse positive statements about adjuvant immunotherapy, and to perceive that their physician preferred adjuvant therapy. They had lower decisional regret and higher satisfaction, even if they experienced toxicity or recurrence. CONCLUSIONS: When provided with comprehensive quantitative information about risks and benefits of adjuvant anti-PD1 immunotherapy, 20/34 (59%) of patients opted for observation. Patients choosing adjuvant immunotherapy had lower decisional regret and higher satisfaction over time even if they had poorer outcomes in treatment.

Trueness and surface characteristics of 3-dimensional printed casts made with different technologies.

STATEMENT OF PROBLEM: Three-dimensional (3D) printers should be capable of fabricating products with high accuracy for potential use in a wide range of dental applications. The trueness and surface characteristics of 3D-printed casts made with different technologies remain unclear. PURPOSE: The purpose of this in vitro study was to evaluate the trueness and surface characteristics of 4 types of dental casts printed using 6 different 3D printers. MATERIAL AND METHODS: Four dental casts prepared for intracoronal and extracoronal restorations were printed using 6 different 3D printers-2 printers of each printing technology (FDM: Creator, Lugo; DLP: D2, ND5100; SLA: Form 2, Form 3). The printed casts were scanned to obtain standard tessellation language (STL) data sets that were superimposed onto the reference to evaluate their trueness (n=15). Trueness was measured based on overall deviations for each cast and for sectional deviations within the cavities. For qualitative evaluation, the surface characteristics of the 3D-printed casts were analyzed by using a digital camera, stereomicroscope, and scanning electron microscope. Statistical analyses were conducted using the Kruskal-Wallis test, followed by multiple Mann-Whitney U tests for pairwise comparisons among groups (α=.05). RESULTS: The overall median trueness values were lowest with the Form 3 (27.9 µm), followed by the ND5100 (30.0 µm), Lugo (37.1 µm), D2 (41.4 µm), Form 2 (46.9 µm), and Creator (83.3 µm) (P<.05). Sectional deviations within the cavity were generally greater than overall deviation. Macroscopic and microscopic images showed that the reproduced casts had the smoothest surface with the SLA, followed by the DLP and FDM printers. Horizontal layers were more discernible with the FDM printer. CONCLUSIONS: The trueness of the 3D-printed casts was influenced by the type of tooth preparation and was printer dependent. Among the tested 3D printers, the Form 3 produced the most accurate casts, while the Creator produced the least accurate casts.

Manipulating wettability of catalytic surface for improving ammonia production from electrochemical nitrogen reduction.

An electrochemical nitrogen reduction reaction (ENRR) is considered a promising alternative for the traditional Haber-Bosch process. In this study, we present a method for improving the ENRR by controlling the wettability of the catalyst surface, suppressing the hydrogen evolution reaction (HER) while facilitating N2 adsorption. Reduced-graphene oxide (rGO) with a hydrophobic surface property and a contact angle (C.A.) of 59° was synthesized through a high-density atmospheric plasma deposition. Two other hydrophilic and superhydrophobic surfaces with a C.A. of 15° and 150° were developed through additional argon plasma and heat treatment of as-deposited rGO, respectively. The ENRR results showed that the ammonia yield and Faradaic efficiency tended to increase with increasing hydrophobicity. Electrochemical measurements reveal that superhydrophobic rGO achieves a higher Faradaic efficiency (5.73 %) at -0.1 V (vs RHE) and a higher NH3 yield (9.77 µg h-1 cm-2) at -0.4 V (vs RHE) in a 0.1 M KOH electrolyte. In addition, the computational fluid dynamics simulation confirmed that the amount of time the N2 gas remains on the surface could increase by improving the hydrophobicity of the catalytic surface. This study inspires the development of the rGO electrocatalyst through surface wettability modification for boosting ammonia electrosynthesis.

Associations Between Race/Ethnicity, Language, and Enrollment on Cancer Research Studies.

PURPOSE: The objective of this study was to determine whether differences in patients' race/ethnicity, preferred language, and other factors were associated with patient enrollment in oncology research studies. PATIENTS AND METHODS: We conducted a retrospective cross-sectional analysis of all adults (>18 and ≤90) seen at a large, metropolitan cancer center from 2005 to 2015, examining if enrollment to a research study, varied by race/ethnicity, preferred language, comorbidities, gender, and age. RESULTS: A total of 233 604 patients were available for initial analysis. Of these, 93 278 (39.9%) were enrolled in a research protocol (therapeutic and non-therapeutic studies). Patients who self-reported their race/ethnicity as Native, Other, Unknown, or Refuse to Answer were less likely to be enrolled on a study. Patients with one or more comorbidities, and those whose preferred language was English, were more likely to be enrolled on a research study. A logistic regression model showed that, although Non-Hispanic Black patients were more likely to have one or more comorbidities and had a higher proportion of their subset selecting English as their preferred language, they were less likely to be enrolled on a study, than our largest population, Non-Hispanic/White patients. CONCLUSIONS: We identified differences in research study enrollment based on preferred language, and within race/ethnicity categories including Native-Populations, Other, Unknown or Refuse to Answer compared to Non-Hispanic/White patients. We also highlighted the lower odds of enrollment among Non-Hispanic/Black patients, in the setting of factors such as comorbidities and English language preference, which were otherwise found to be positive predictors of enrollment. Further investigation is needed to design targeted interventions to reduce disparities in oncology research study enrollment, with particular focus on language diversity.