Extending the π-Conjugation of A Donor-Acceptor Covalent Organic Framework for High-Rate and High-Capacity Lithium-Ion Batteries.

Realizing high-rate and high-capacity features of Lihium-organic batteries is essential for their practical use but remains a big challenge, which is due to the instrinsic poor conductivity, limited redox kinetics and low utility of organic electrode mateials. This work presents a well-designed donor-acceptor Covalent Organic Framework (COFs) with extended conjugation, mesoscale porosity, and dual redox-active centers to promote fast charge transfer and multi-electron processes. As anticipated, the prepared cathode with benzo [1,2-b:3,4-b':5,6-b''] trithiophene (BTT) as p-type and pyrene-4,5,9,10-tetraone (PTO) as n-type material (BTT-PTO-COF) delivers impressive specific capacity (218 mAh g-1 and 275 mAh g-1 at 0.2 A g-1 in ether-based and carbonate-based electrolyte respectively) and outstanding rate capability (79 mAh g-1 at 50 A g-1 in ether-based electrolyte and 124 mAh g-1 at 10 A g-1 in carbonate-based electrolyte). Moreover, the potential of BTT-PTO-COF electrode for prototype batteries has been demonstrated by full cells of dual-ion batteries, which attain comparable electrochemical performances to the half cells. Moreover, mechanism studies combining ex-situ characterization and theoratical calculations reveal the efficient dual-ion storage process and facile charge transfer of BTT-PTO-COF. This work not only expands the diversity of redox-active COFs but also provide concept of structure design for high-rate and high-capacity organic electrodes.

Covalent Organic Frameworks for Photocatalytic Reduction of Carbon Dioxide: A Review.

Covalent organic frameworks (COFs) are crystalline networks with extended backbones cross-linked by covalent bonds. Due to the semiconductive properties and variable metal coordinating sites, along with the rapid development in linkage chemistry, the utilization of COFs in photocatalytic CO2RR has attracted many scientists' interests. In this Review, we summarize the latest research progress on variable COFs for photocatalytic CO2 reduction. In the first part, we present the development of COF linkages that have been used in CO2RR, and we discuss four mechanisms including COFs as intrinsic photocatalysts, COFs with photosensitive motifs as photocatalysts, metalated COF photocatalysts, and COFs with semiconductors as heterojunction photocatalysts. Then, we summarize the principles of structural designs including functional building units and stacking mode exchange. Finally, the outlook and challenges have been provided. This Review is intended to give some guidance on the design and synthesis of diverse COFs with different linkages, various structures, and divergent stacking modes for the efficient photoreduction of CO2.

Biochemical and genetic mechanisms in Pieris rapae (Lepidoptera: Pieridae) resistance under emamectin benzoate stress.

Pieris rapae (Lepidoptera: Pieridae) poses a significant threat to Brassicaceae crops, leading to substantial losses annually. Repeated insecticide applications are widely used to protect crops and increase the resistance of P. rapae. Exploring the biochemical and molecular basis of insecticide tolerance in P. rapae is crucial for achieving effective insect suppuration and implementing resistance control strategies. In our research, emamectin benzoate (EBZ) resistance was developed in P. rapae strain through selective pressure over 15 generations. Moreover, the biochemical mechanisms underlying resistance to EBZ and its potential cross-resistance to other insecticides were studied. Additionally, the expression levels of cytochrome P450 (CYP450) and glutathione-s-transferase (GST) genes in P. rapae were quantitatively assessed upon exposure to EBZ using real-time PCR. Our data exhibited that the LC50 value of susceptible strain (Sus) and EBZ resistance strain (EBZ-R) were 0.009 and 8.09 mg/L, with a resistance ratio (RR) reaching 898.8-fold. The EBZ-R stain displayed notably low cross-resistance to lambda-cyhalothrin, spinetoram, and cypermethrin. However, it demonstrated a moderate level of cross-resistance to deltamethrin. Conversely, no cross-resistance was noted to chlorantraniliprole and indoxacarb. Notably, enzyme inhibitors of detoxification enzymes revealed that piperonyl butoxide (PBO) and diethyl maleate (DEM) enhanced the EBZ toxicity to the resistant strain, indicating the potential involvement of CYP450 and GST in avermectin resistance. A remarkable enhancement in CYP450 and GST activity was observed in the EBZ-R stain. CYP450 and GST genes are upregulated in the EBZ-R stain compared to the Sus strain, which serves as a basis for comprehending the mechanism behind P. rapae resistance to EBZ. The molecular docking analysis demonstrated that EBZ has a high binding affinity with CYP6AE120 and PrGSTS1 with docking energy values of -20.19 and -22.57 kcal/mol, respectively. Our findings offer valuable insights into crafting efficient strategies to monitor and manage resistance in P. rapae populations in Egypt.

Ultraviolet Nonlinear Optical Single Crystals of A Three-Dimensional Chiral Covalent Framework Containing Te-O-B-O Bonds.

Extending covalent organic frameworks (COFs) into crystalline carbon-free covalent backbones is an important strategy to endow these materials with more exotic functions. Integrating metal-free inorganic and organic components into one covalent framework is an effective way to address the issue of poor thermal/solvent stability in the field of nonlinear optics (NLO). However, constructing such structures is very challenging. Here, we linked 3-connected nods (BO3) and 2-connected organic building blocks (Te(Ph)2) together to produce colorless single crystals (size up to 400 µm) of a three-dimensional (3D) chiral covalent framework (CityU-22). The single-crystal X-ray diffraction (SCXRD) analysis reveals that CityU-22 has a non-carbon Te-O-B-O bond-based network with the srs topology. The chiral CityU-22 displays good stability under the treatment of different common solvents or heat (the decomposition temperature above 300 °C). Due to its non-π-conjugated backbone (-Te-O-B-O-), CityU-22 shows an ultraviolet NLO behavior with a second-harmonic generation (SHG) response similar to KH2PO4 (KDP).

High-performance Piezoelectric Two-dimensional Covalent Organic Frameworks.

Organic piezoelectric nanogenerators (PENGs) are attractive in harvesting mechanical energy for various self-powering systems. However, their practical applications are severely restricted by their low output open circuit voltage. To address this issue, herein, we prepared two two-dimensional (2D) covalent organic frameworks (COFs, CityU-13 and CityU-14), functionalized with fluorinated alkyl chains for PENGs. The piezoelectricity of both COFs was evidenced by switchable polarization, characteristic butterfly amplitude loops, phase hysteresis loops, conspicuous surface potentials and high piezoelectric coefficient value (d33). The PENGs fabricated with COFs displayed highest output open circuit voltages (60 V for CityU-13 and 50 V for CityU-14) and delivered satisfactory short circuit current with an excellent stability of over 600 seconds. The superior open circuit voltages of CityU-13 and CityU-14 rank in top 1 and 2 among all reported organic materials-based PENGs.

Transcriptome analysis of the degradation process of organic nitrogen by two heterotrophic nitrifying and aerobic denitrifying bacteria.

The heterotrophic nitrification aerobic denitrification bacteria (HNDS) can perform nitrification and denitrification at the same time. Two HNDS strains, Achromobacter sp. HNDS-1 and Enterobacter sp. HNDS-6 which exhibited an amazing ability to solution nitrogen (N) removal have been successfully isolated from paddy soil in our lab. When peptone or ammonium sulfate as sole N source, no significant difference in gene expression related to nitrification and denitrification of the strains was found according to the transcriptome analysis. The expression of phosphomethylpyrimidine synthase (thiC), ABC transporter substrate-binding protein, branched-chain amino acid ABC transporter substrate-binding protein, and RNA polymerase (rpoE) in HNDS-1 were significantly upregulated when used peptone as N source, while the expression of exopolysaccharide production protein (yjbE), RNA polymerase (rpoC), glutamate synthase (gltD) and ABC-type branched-chain amino acid transport systems in HNDS-6 were significantly upregulated. This indicated that these two strains are capable of using organic N and converting it into NH4+-N, then utilizing NH4+-N to synthesize amino acids and proteins for their own growth, and strain HNDS-6 can also remove NH4+-N through nitrification and denitrification.

A Covalent Organic Nanoribbon: Preparation, Single-Crystal Structure with Chinese Luban Lock Configuration, and Photocatalytic Behavior.

The multiple mortise-and-tenon joint parts are the core factors to provide the structural stability and diversity of Chinese Luban locks; however, constructing such structures is very challenging. Herein, single crystals of a covalent organic nanoribbon (named CityU-27) are prepared through the assembly of hexahydroxytriphenylene (HHTP), 4,4'-vinylenedipyridine (BYE), and phenylboronic acid (BA) together through dative boron←nitrogen (B←N) bonds. The single-crystal X-ray diffraction analysis indicates that CityU-27 has a covalent organic nanoribbon structure, where each nanoribbon forms multiple and tight π-π interactions with four neighboring others to generate a Luban lock-like configuration. CityU-27 has been demonstrated to be an efficient photocatalyst in a one-pot tandem reaction of hydrogen evolution reaction (HER) and semi-hydrogenation reaction of alkynes in series to produce olefins without any additional photosensitizers and co-catalysts (metal-free).

A 2D Metal-Free Inorganic Covalent Framework: Synthesis, Crystal Structure, and Room-Temperature Phosphorescence.

The synthesis, crystal structure and room-temperature phosphorescence (RTP) of a 2D metal-free inorganic covalent framework ((H2en) [B5O8(OH)], named as CityU-12, and en represents for ethylenediamine) are reported. The precise structure information of CityU-12 has been disclosed through both single-crystal X-ray diffraction (SCXRD) analysis and low-dose high-resolution transmission electron microscopy (LD-HRTEM) study. The SCXRD results show that CityU-12 composes of 2D anionic B─O-based covalent inorganic frameworks with protonated ethylenediamine locating in the pore sites of 2D B─O layers while LD-HRTEM suggests that CityU-12 has an interplanar distance of 0.60 nm for (00 2 ¯ $\bar{2}$ ) crystal plane and 0.60 nm for (10 1 ¯ $\bar{1}$ ) crystal plane. The optical studies show that CityU-12 is an excellent nonconventional RTP material with the emission peak at 530 nm and a lifetime of 1.5 s. The quantum yield is 84.6% and the afterglow time is as long as 2.5 s. This work demonstrates that metal-free B─O frameworks can be promising nonconventional phosphors for RTP.

Decontamination of Chlorpyrifos Residue in Soil by Using Mentha piperita (Lamiales: Lamiaceae) for Phytoremediation and Two Bacterial Strains.

This study utilizes Mentha piperita (MI) for the first time to investigate the uptake and translocation of chlorpyrifos (CPF; 10 µg g-1) from soil, introducing a new approach to improve the efficacy of this technique, which includes using biosurfactants (Bacillus subtilis and Pseudomonas aeruginosa) at 107 CFU/mL to degrade CPF under greenhouse conditions. Moreover, antioxidant enzymes, including superoxide dismutase (SOD) and peroxidase (Prx), and oxidative stress due to hydrogen peroxide (H2O2) and malondialdehyde (MDA) in MI roots and leaves were evaluated under CPF stress. Our results demonstrated that amending soil with MI and B. subtilis followed by P. aeruginosa significantly reduced CPF levels in the soil (p > 0.05) and enhanced CPF concentrations in MI roots and leaves after 1, 3, 7, 10, and 14 days of the experiment. Furthermore, CPF showed its longest half-life (t1/2) in soil contaminated solely with CPF, lasting 15.36 days. Conversely, its shortest half-life occurred in soil contaminated with CPF and treated with MI along with B. subtilis, lasting 4.65 days. Soil contaminated with CPF and treated with MI and P. aeruginosa showed a half-life of 7.98 days. The half-life (t1/2) of CPF-contaminated soil with MI alone was 11.41 days. A batch equilibrium technique showed that B. subtilis is better than P. aeruginosa for eliminating CPF from soil in In vitro experiments. Notably, CPF-polluted soil treated with coadministration of MI and the tested bacteria improved the activities of SOD and Prx and reduced H2O2 and MDA compared with CPF-polluted soil treated with MI alone. Our findings demonstrated that using B. subtilis and P. aeruginosa as biosurfactants to augment phytoremediation represents a commendable strategy for enhancing the remediation of CPF contamination in affected sites while reducing the existence of harmful pesticide remnants in crop plants.

Based on knowledge capital value for disease cost accounting of diagnosis related groups.

Background: The National Health Commission and the other relevant departments in China have initiated testing of the Diagnosis Related Groups (DRGs) system in 30 pilot locations since 2019. In the process of DRG payment reform, accounting for the costs of diseases has become a highly challenging issue. The traditional method of disease accounting method overlooks the compensation for the knowledge capital value of medical personnel. Objective: The primary objective of this study is to analyze the cost accounting scheme of China's Diagnosis Related Groups (C-DRG), focusing on the value of knowledge capital. Methods: The study initially proposes a measurement index system for the value of knowledge-based capital, including the difficulty of disease treatment, labor intensity of disease treatment, risk of disease treatment, and operation/treatment time for diseases. The Analytic Hierarchy Process (AHP) is then utilized to weigh the features of medical workers' knowledge capital value. First, pairwise comparisons are conducted in this stage to develop a two-pair judgment matrix of the primary indicators. Second, the eigenvectors corresponding to the maximum eigenvalues of the matrix are calculated to generate the weight coefficient of each feature. The consistency test is carried out after this stage. An empirical analysis is conducted by collecting data, including the full costs of treating three types of diseases-hip replacement, acute simple appendicitis, and heart bypass surgery-from one public medical institution. Results: The empirical analysis examines whether this DRG costing accounting can address the issue of neglecting the value of medical workers' knowledge capital. The methods reconfigure the positive incentive mechanism, stimulate the endogenous motivation of the medical service system, foster independent changes in medical behavior, and achieve the goals of reasonable cost control. Conclusion: In the cost accounting system of C-DRG, the value of medical workers' knowledge capital is acknowledged. This acknowledgment not only boosts the enthusiasm and creativity of medical workers in optimizing and standardizing the diagnosis and treatment process but also improves the transparency and authenticity of DRG pricing. This is particularly evident in the optimization and standardization of the diagnosis and treatment processes within medical institutions and in monitoring inadequate medical practices within these institutions.

Constructing an Asymmetric Covalent Triazine Framework to Boost the Efficiency and Selectivity of Visible-Light-Driven CO2 Photoreduction.

The photocatalytic reduction of CO2 represents an environmentally friendly and sustainable approach for generating valuable chemicals. In this study, a thiophene-modified highly conjugated asymmetric covalent triazine framework (As-CTF-S) is developed for this purpose. Significantly, single-component intramolecular energy transfer can enhance the photogenerated charge separation, leading to the efficient conversion of CO2 to CO during photocatalysis. As a result, without the need for additional photosensitizers or organic sacrificial agents, As-CTF-S demonstrates the highest photocatalytic ability of 353.2 µmol g-1 and achieves a selectivity of ≈99.95% within a 4 h period under visible light irradiation. This study provides molecular insights into the rational control of charge transfer pathways for high-efficiency CO2 photoreduction using single-component organic semiconductor catalysts.

Theoretical Study of the Decomposition Reactions of 2-Vinylfuran.

With the development of new synthetic methods, 2-vinylfuran (V2F) has become a potential renewable biofuel. In this work, the potential energy surfaces for the V2F unimolecular dissociation reaction, the H-addition reaction, and the H-abstraction reaction were constructed at the G4 level. The temperature- and pressure-dependent rate constants for the relevant reactions on the potential energy surfaces were calculated by solving the master equation based on the transition state theory and Rice-Ramsperger-Kassel-Marcus theory. The results show that the rate constant for the intramolecular H-transfer reaction of V2F with H atoms from the C(5) site to the C(4) site to form 2-vinylfuran-3(2H)-carbene, followed by the decomposition to form h145te3o, is the highest. The rate constants for the H-abstraction reaction of V2F with H atoms were the largest at C(6) on the branched chain, followed by C(7), and the rate constants for the H-abstraction reaction at C(3), C(4), and C(5) on the furan ring were not competitive. Negative temperature coefficient effects are observed for the rate constants of the addition reactions of V2F with H atoms at low pressures, with the H-addition rate constant at the C(5) site being the largest. This work not only provides the necessary rate constants for the reaction mechanism of V2F combustion but also provides theoretical guidance for the practical application of furan-based fuels.

Insights into the cycling stability of manganese-based zinc-ion batteries: from energy storage mechanisms to capacity fluctuation and optimization strategies.

Manganese-based materials are considered as one of the most promising cathodes in zinc-ion batteries (ZIBs) for large-scale energy storage applications owing to their cost-effectiveness, natural availability, low toxicity, multivalent states, high operation voltage, and satisfactory capacity. However, their intricate energy storage mechanisms coupled with unsatisfactory cycling stability hinder their commercial applications. Previous reviews have primarily focused on optimization strategies for achieving high capacity and fast reaction kinetics, while overlooking capacity fluctuation and lacking a systematic discussion on strategies to enhance the cycling stability of these materials. Thus, in this review, the energy storage mechanisms of manganese-based ZIBs with different structures are systematically elucidated and summarized. Next, the capacity fluctuation in manganese-based ZIBs, including capacity activation, degradation, and dynamic evolution in the whole cycle calendar are comprehensively analyzed. Finally, the constructive optimization strategies based on the reaction chemistry of one-electron and two-electron transfers for achieving durable cycling performance in manganese-based ZIBs are proposed.

Recent Progress in Using Covalent Organic Frameworks to Stabilize Metal Anodes for Highly-Efficient Rechargeable Batteries.

Alkali metals (e.g. Li, Na, and K) and multivalent metals (e.g. Zn, Mg, Ca, and Al) have become star anodes for developing high-energy-density rechargeable batteries due to their high theoretical capacity and excellent conductivity. However, the inevitable dendrites and unstable interfaces of metal anodes pose challenges to the safety and stability of batteries. To address these issues, covalent organic frameworks (COFs), as emerging materials, have been widely investigated due to their regular porous structure, flexible molecular design, and high specific surface area. In this minireview, we summarize the research progress of COFs in stabilizing metal anodes. First, we present the research origins of metal anodes and delve into their advantages and challenges as anodes based on the physical/chemical properties of alkali and multivalent metals. Then, special attention has been paid to the application of COFs in the host design of metal anodes, artificial solid electrolyte interfaces, electrolyte additives, solid-state electrolytes, and separator modifications. Finally, a new perspective is provided for the research of metal anodes from the molecular design, pore modulation, and synthesis of COFs.

A Naphthalenetetracarboxdiimide-Containing Covalent Organic Polymer: Preparation, Single Crystal Structure and Battery Application.

Inspired by dative boron-nitrogen (B←N) bonds proven to be the promising dynamic linkage for the construction of crystalline covalent organic polymers/frameworks (COPs/COFs), we employed 1,4-bis(benzodioxaborole) benzene (BACT) and N,N'-Di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxdiimide (DPNTCDI) as the corresponding building blocks to construct a functional COP (named as CityU-25), which had been employed as an anode in rechargeable lithium ion batteries. CityU-25 displayed an excellent reversible lithium storage capability of 455 mAh/g after 170 cycles at 0.1 A/g, and an impressive one of 673 mAh/g after 720 cycles at 0.5 A/g. These findings suggest that CityU-25 is a standout candidate for advanced battery technologies, highlighting the potential application of this type of materials.

Constructing N-Containing Poly(p-Phenylene) (PPP) Films Through A Cathodic-Dehalogenation Polymerization Method.

Developing the films of N-containing unsubstituted poly(p-phenylene) (PPP) films for diverse applications is significant and highly desirable because the replacement of sp2 C atoms with sp2 N atoms will bring novel properties to the as-prepared polymers. In this research, an electrochemical-dehalogenation polymerization strategy is employed to construct two N-containing PPP films under constant potentials, where 2,5-diiodopyridine (DIPy) and 2,5-dibromopyrazine (DBPz) are used as starting agents. The corresponding polymers are named CityU-23 (for polypyridine) and CityU-24 (for polypyrazine). Moreover, it is found that both polymers can form films in situ on different conductive substrates (i.e., silicon, gold, ITO, and nickel), satisfying potential device fabrication. Furthermore, the as-obtained thin films of CityU-23 and CityU-24 exhibit good performance of alkaline hydrogen evolution reaction with the overpotential of 212.8 and 180.7 mV and the Tafel slope of 157.0 and 122.4 mV dec-1, respectively.

Unraveling nitrogen loss in paddy soils: A study of anaerobic nitrogen transformation in response to various irrigation practice.

Soil nitrogen (N) transformation processes, encompassing denitrification, anaerobic ammonium oxidation (anammox), and anaerobic ammonium oxidation coupled with iron reduction (Feammox), constitute the primary mechanisms of soil dinitrogen (N2) loss. Despite the significance of these processes, there is a notable gap in research regarding the assessment of managed fertilization and irrigation impacts on anaerobic N transformations in paddy soil, crucial for achieving sustainable soil fertility management. This study addressed the gap by investigating the contributions of soil denitrification, anammox, and Feammox to N2 loss in paddy soil across varying soil depths, employing different fertilization and irrigation practices by utilizing N stable isotope technique for comprehensive insights. The results showed that anaerobic N transformation processes decreased with increasing soil depth under alternate wetting and drying (AWD) irrigation, but increased with the increasing soil depth under conventional continuous flooding (CF) irrigation. The denitrification and anammox rates varied from 0.41 to 2.12 mg N kg-1 d-1 and 0.062-0.394 mg N kg-1 d-1, respectively, which accounted for 84.3-88.1% and 11.8-15.7% of the total soil N2 loss. Significant correlations were found among denitrification rate and anammox rate (r = 0.986, p < 0.01), Fe (Ⅲ) reduction rate and denitrification rate (r = 0.527, p < 0.05), and Fe(Ⅲ) reduction rate and anammox rate (r = 0.622, p < 0.05). Moreover, nitrogen loss was more pronounced in the surface layer of the paddy soil compared to the deep layer. The study revealed that denitrification predominantly contributed to N loss in the surface soil, while Feammox emerged as a significant N loss pathway at depths ranging from 20 to 40 cm, accounting for up to 26.1% of the N loss. It was concluded that fertilization, irrigation, and soil depth significantly influenced anaerobic N transformation processes. In addition, the CF irrigation practice is best option to reduce N loss under managed fertilization. Furthermore, the role of microbial communities and their response to varying soil depths, fertilization practices, and irrigation methods could enhance our understanding on nitrogen loss pathways should be explored in future study.

Constructing ultra-stable, high-energy, and flexible aqueous zinc-ion batteries using environment-friendly organic cathodes.

Due to their sustainability, environmental friendliness, high specific capacity, and rapid reaction kinetics, quinone cathodes have broad application prospects in aqueous zinc-ion batteries (AZIBs). However, conventional small-molecule quinone cathodes usually suffer from unavoidable dissolution, resulting in terrible cycling stability. Herein, based on a strategy of molecular structure optimization, calix[8]quinone (C8Q) is for the first time used as a cathode in AZIBs. By extending the structure of the classical small-molecule quinone cathode calix[4]quinone (C4Q), C8Q further adds four p-benzoquinone structural units, which significantly suppresses the dissolution of its discharge products and greatly improves the cycle stability of the cathode. Specifically, the C8Q cathode displays a discharge specific capacity of 207.2 mA h g-1 at 1 A g-1 and a long-life cycle stability (93 mA h g-1/10 A g-1/10000th). Even with a high active material loading of 11 mg cm-2, the Zn‖C8Q battery also exhibits high redox reversibility and remarkable electrochemical stability. Furthermore, the belt-shaped Zn‖C8Q battery has high stability and outstanding flexibility, indicating its promising application in flexible wearable electronic devices.

Lactiplantibacillus plantarum ATCC8014 Alleviates Postmenopausal Hypercholesterolemia in Mice by Remodeling Intestinal Microbiota to Increase Secondary Bile Acid Excretion.

Hypercholesterolemia poses a significant cardiovascular risk, particularly in postmenopausal women. The anti-hypercholesterolemic properties of Lactiplantibacillus plantarum ATCC8014 (LP) are well recognized; however, its improving symptoms on postmenopausal hypercholesterolemia and the possible mechanisms have yet to be elucidated. Here, we utilized female ApoE-deficient (ApoE-/-) mice undergoing bilateral ovariectomy, fed a high-fat diet, and administered 109 colony-forming units (CFU) of LP for 13 consecutive weeks. LP intervention reduces total cholesterol (TC) and triglyceride (TG) accumulation in the serum and liver and accelerates their fecal excretion, which is mainly accomplished by increasing the excretion of fecal secondary bile acids (BAs), thereby facilitating cholesterol conversion. Correlation analysis revealed that lithocholic acid (LCA) is an important regulator of postmenopausal lipid abnormalities. LP can reduce LCA accumulation in the liver and serum while enhancing its fecal excretion, accomplished by elevating the relative abundances of Allobaculum and Olsenella in the ileum. Our findings demonstrate that postmenopausal lipid dysfunction is accompanied by abnormalities in BA metabolism and dysbiosis of the intestinal microbiota. LP holds therapeutic potential for postmenopausal hypercholesterolemia. Its effectiveness in ameliorating lipid dysregulation is primarily achieved through reshaping the diversity and abundance of the intestinal microbiota to correct BA abnormalities.