Contact-Electro-Catalysis Through Electret Behavior to Facilitate Electron Transfer.

Contact-electro-catalysis (CEC) usually uses polymer dielectrics as its catalysts under mechanical stimulation conditions, which although has a decent catalytic dye degradation effect still warrants performance improvement. A carrier separation promotion strategy based on an internal electric field by polarization can effectively improve ferroelectric material performance in photocatalysis and piezocatalysis. Therefore, carrier separation as a necessary process of CEC also can be promoted and is largely expected to improve CEC performance theoretically. However, the carrier separation enhancement by the internal electric field strategy has not been achieved in the CEC experiment yet, because of the difficulty of building an internal electric field in an inert polymer dielectric. Herein, a polytetrafluoroethylene (PTFE) dielectric was charged through an electret process, which was believed to establish an internal electric field for CEC catalysts proved by KPFM, XPS, and triboelectric nanogenerator voltage output analysis. The fastest degradation rate of methyl orange reached over 90% at 1.5 h, while the hydroxyl free radical (•OH) yield of the PTFE electret was nearly three times that of the original PTFE. Density functional theory (DFT) calculations verified that the potential barrier of interatomic electron transfer between PTFE and H2O was reduced by 37% under the internal electric field. The electret strategy used herein to optimize the PTFE catalyst provides a base for the use of other general plastics in CEC and facilitates the production of easily prepared, easily recyclable, and inexpensive polymer dielectric catalysts that can promote large-scale pollutant degradation via CEC.

Hydrogen Bonds and In-situ Photoinduced Metallic Bi0/Ni0 Accelerating Z-scheme Charge Transfer of BiOBr@NiFe-LDH for Highly Efficient Photocatalysis.

For heterojunction system, the lack of stable interfacial driving force and definite charge transfer channel makes the charge separation and transfer efficiency unsatisfactory. The photoreaction mechanism occurring at the interface also receives less attention. Herein, a 2D/2D Z-scheme junction BiOBr@NiFe-LDH with large-area contact featured by abundant interfacial hydrogen bonds and a strong interfacial electric field (IEF) is synthesized, and in-situ photoinduced metallic species assisting charge transfer mechanism is demonstrated. The hydrogen bonds between O atoms from BiOBr and H atoms from NiFe-LDH induce a significant interfacial charge redistribution, establishing a robust IEF. Notably, during photocatalytic reaction, Bi0 and Ni0 are in-situ isolated from BiOBr and NiFe-LDH in heterojunction, which separately act as electron transport mediator and electron trap to further accelerate charge transfer efficiency up to 71.2%. Theoretical calculations further demonstrate that the existence of Bi0 strengthens the IEF. Therefore, high-speed spatial charge separation is realized in Bi0/BiOBr@Ni0/NiFe-LDH, leading to a prominent photocatalytic activity with a tetracycline removal ratio of 88.3% within 7 minutes under visible-light irradiation and the presence of persulfate, far exceeding majority of photocatalysts reported previously. This study provides valid insights for designing hydrogen bonding heterojunction systems, and advances mechanistic understanding on in-situ photoreaction at interfaces.

Complete genome sequence of a novel Pseudomonas sp. IT1137 isolated from Antarctic intertidal sediment showing potential for alkane degradation at low temperatures.

Pseudomonas species are known for their diverse metabolic abilities and broad ecological distribution. They are fundamental components of bacterial communities and perform essential ecological functions in the environment. A psychrotrophic Pseudomonas sp. IT1137 was isolated from intertidal sediment in the coastal region of the Fildes Peninsula, King George Island, Antarctica. The strain contained a circular chromosome of 5,346,697 bp with a G + C content of 61.66 mol% and one plasmid of 4481 bp with a G + C content of 64.61 mol%. A total of 4848 protein-coding genes, 65 tRNA genes and 15 rRNA genes were obtained. Genome sequence analysis revealed that strain IT1137 not only is a potentially novel species of the genus Pseudomonas but also harbors functional genes related to nitrogen, sulfur and phosphorus cycling. In addition, genes involved in alkane degradation, ectoine synthesis and cyclic lipopeptide (CLP) production were detected in the bacterial genome. The results indicate the potential of the strain Pseudomonas sp. IT1137 for biotechnological applications such as bioremediation and secondary metabolite production and are helpful for understanding bacterial adaptability and ecological function in cold coastal environments.

All-Organic Piezo-Photocatalytic Film with Highly Efficient Catalysis, Weak-Force Excitation, and Recyclability.

Polyaniline (PANI), a typical organic photocatalyst, has an adjustable structure and good stability, can be easily synthesized on a large scale, and is economical. PANI is doped with ions to regulate its internal structure and improve its photocatalytic performance. However, its photocatalytic performance is limited by the doping concentration and its intrinsic properties, hindering its further application. Herein, PANI films with a piezo-photocatalytic function are fabricated to improve photocatalytic performance and explore their self-powered environmental purification property. PANI/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) sandwich films, with PVDF-HFP as the interlayer, are prepared by introducing a piezoelectric field into PANI photocatalysts, thereby achieving excellent piezo-photocatalytic performance. The as-fabricated piezo-photocatalyst degrades methyl orange at a rate of 91.2% after 60 min under magnetic stirring. Owing to the low Young's modulus of the all-organic catalyst, self-powered purification is realized using the PANI/PVDF-HFP film. Leaf surfaces are functionalized by loading the film in them for removing pollutants under sunlight and water flow. Thus, this study proposes a common strategy, wherein a piezoelectric interlayer is introduced to load the organic photocatalyst for preparing an all-organic piezo-photocatalyst. This piezo-photocatalyst can be easily recycled and responds to weak forces, realizing its application for self-powered environmental purification.

Pseudomonas paeninsulae sp. nov. and Pseudomonas svalbardensis sp. nov., isolated from Antarctic intertidal sediment and Arctic soil, respectively.

Two Gram-stain-negative, aerobic, rod-shaped, non-endospore-forming and motile bacterial strains, designated IT1137T and S025T, were isolated from an intertidal sediment sample collected from the Fildes Peninsula (King George Island, Maritime Antarctica) and a soil sample under red snow in the Ny-Ålesund region (Svalbard, High Arctic), respectively. The 16S rRNA gene sequence similarity values grouped them in the genus Pseudomonas. The two strains were characterized phenotypically using API 20E, API 20NE, API ZYM and Biolog GENIII tests and chemotaxonomically by their fatty acid contents, polar lipids and respiratory quinones. Multilocus sequence analysis (concatenated 16S rRNA, gyrB, rpoB and rpoD sequences), together with genome comparisons by average nucleotide identity and digital DNA-DNA hybridization, were performed. The results showed that the similarity values of the two isolates with the type strains of related Pseudomonas species were below the recognized thresholds for species definition. Based on polyphasic taxonomy analysis, it can be concluded that strains IT1137T and S025T represent two novel species of the genus Pseudomonas, for which the names Pseudomonas paeninsulae sp. nov. (type strain IT1137T=PMCC 100533T=CCTCC AB 2023226T=JCM 36637T) and Pseudomonas svalbardensis sp. nov. (type strain S025T=PMCC 200367T= CCTCC AB 2023225T=JCM 36638T) are proposed.

Highly Potent Transparent Passive Cooling Coating via Microphase-Separated Hydrogel Combining Radiative and Evaporative Cooling.

Transparent passive cooling materials can cool targets environmentally without interfering with light transmission or visual information reception. They play a prominent role in solar cells and flexible display cooling. However, achieving potent transparent cooling remains challenging, because light transmission is accompanied by thermal energy. Here we propose to realize effective passive cooling in transparent materials via a microscale phase separation hydrogel film. The poly(N-isopropylacrylamide-co-acrylamide) hydrogel presents light transmittance of >96% and infrared emissivity as high as 95%. The microphase-separated structure affords a higher enthalpy of evaporation. The film is highly adhesive. In field applications, it reduces temperatures by 9.14 °C compared to those with uncovered photovoltaic panels and 7.68 °C compared to those for bare flexible light-emitting diode screens. Simulations indicate that energy savings of 32.76-51.65 MJ m-2 year-1 can be achieved in typical tropical monsoon climates and temperate continental climates. We expect this work to contribute to energy-efficient materials and a carbon-neutral society.

Shear Flow-Assembled Janus Membrane with Bifunctional Osteogenic and Antibacterial Effects for Guided Bone Regeneration.

Guided bone regeneration (GBR) membranes that reside at the interface between the bone and soft tissues for bone repair attract increasing attention, but currently developed GBR membranes suffer from relatively poor osteogenic and antibacterial effects as well as limited mechanical property and biodegradability. We present here the design and fabrication of a bifunctional Janus GBR membrane based on a shear flow-driven layer by a layer self-assembly approach. The Janus GBR membrane comprises a calcium phosphate-collagen/polyethylene glycol (CaP@COL/PEG) layer and a chitosan/poly(acrylic acid) (CHI/PAA) layer on different sides of a collagen membrane to form a sandwich structure. The membrane exhibits good mechanical stability and tailored biodegradability. It is found that the CaP@COL/PEG layer and CHI/PAA layer contribute to the osteogenic differentiation and antibacterial function, respectively. In comparison with the control group, the Janus GBR membrane displays a 2.52-time and 1.84-time enhancement in respective volume and density of newly generated bone. The greatly improved bone repair ability of the Janus GBR membrane is further confirmed through histological analysis, and it has great potential for practical applications in bone tissue engineering.

Unveiling the Nexus: Influence of learning motivation on organizational performance and innovative climate of Chinese firms.

This study delves into the interplay between learning motivation, organizational performance, and the innovative climate within Chinese firms. It is a subject of frequent discussion in literature but there is little concrete evidence supporting this viewpoint within the context of small and medium size enterprises in China. Drawing upon a comprehensive review of existing literature and empirical data gathered, this research aims to uncover the connections between employee learning motivation and its impact on the organizational dynamics in the context of Chinese firms. A cross sectional survey is used to collect the data of 115 Chinese firms and structural equation modelling (SEM) is used for empirical analysis. The results show that success of firms in terms of innovation is significantly influenced by organizational learning motivation. Moreover, innovative environment of the firms increases the overall performance of the organizations. It is also found that factors affecting the innovations have a significant impact on organizational performance. The findings of the study suggest that firms should develop organizational learning motivation to boost their innovation capability and overall performance. This study offers insights and recommendations for organizations and policymakers seeking to harness the potential of learning motivation to drive sustainable growth, competitiveness, and innovation in Chinese firms.

Distribution Pattern of Suitable Areas and Corridor Identification of Endangered Ephedra Species in China.

The suitable habitat of endangered Ephedra species has been severely threatened and affected by climate change and anthropogenic activities; however, their migration trends and restoration strategies are still relatively understudied. In this study, we utilized the MaxEnt model to simulate the suitable habitats of five endangered Ephedra species in China under current and future climate scenarios. Additionally, we identified significant ecological corridors by incorporating the minimum cumulative resistance (MCR) model. Under the current climate scenario, the suitable area of Ephedra equisetina Bunge, Ephedra intermedia Schrenk ex Mey, Ephedra sinica Stapf, and Ephedra monosperma Gmel ex Mey comprised 16% of the area in China, while Ephedra rhytidosperma Pachom comprised only 0.05%. The distribution patterns of these five Ephedra species were primarily influenced by altitude, salinity, temperature, and precipitation. Under future climate scenarios, the suitable areas of E. equisetina, E. intermedia, and E. sinica are projected to expand, while that of E. monosperma is expected to contract. Notably, E. rhytidosperma will lose its suitable area in the future. Our identified ecological corridors showed that the first-level corridors encompassed a wider geographical expanse, incorporating E. equisetina, E. intermedia, E. sinica, and E. monosperma, while that of E. rhytidosperma exhibited a shorter length and covered fewer geographical areas. Overall, our study provides novel insights into identifying priority protected areas and protection strategies targeting endangered Ephedra species.

The mechanism of intrinsic peroxidase (POD)-like activity of attapulgite.

Natural attapulgite (ATP) is a promising substitute for existing artificial nanozymes due to its intrinsic enzymatic activity. However, the active center of ATP's inherent enzymatic activity has not yet been revealed, which limits its further design and activity optimization. Studying the active center of mineral materials can be extremely challenging due to their complexity. Here, we demonstrated that Fe is the primary element in ATP responsible for peroxidase (POD)-like activity through theoretical speculation and experimental verification. More importantly, we found that the ratio of Fe2+/Fe3+ is responsible for the district POD-like activity of ATP from different regions with the same Fe content. Additionally, three facile strategies, including grinding, heat treatment, and acid treatment, were demonstrated to increase the relative Fe content and thus optimize the POD-like activity of ATP. Finally, ATP was used to detect the concentration of H2O2, enabling the detection of low concentrations (0.11-1.76 mM) of H2O2. This study serves as a novel reference for the future design and performance optimization of nanozymes that are based on ATP and clay minerals.

Natural Nano-Minerals (NNMs): Conception, Classification and Their Biomedical Composites.

Natural nano-minerals (NNMs) are minerals that are derived from nature with a size of less than 100 nm in at least one dimension in size. NNMs have a number of excellent properties due to their unique nanostructure and have been applied in various fields in recent years. They are rising stars in various disciplines, such as materials, biomedicine, and chemistry, taking advantage of their huge surface area, multiple active sites, excellent adsorption capacity, large quantity, low cost, and nontoxicity, etc. To provide a more comprehensive overview of NNMs and the biomedical applications of NNMs-based nanocomposites, this review classifies NNMs into three types by dimension, lists the structure and properties of typical NNMs, and illustrates their biomedical applications. Furthermore, a novel concept of natural nanomineral medical materials (NNMMs) is proposed, focusing on the medical value of NNMs. In addition, this review attempts to address the current challenges and delineate future directions for the advancement of NNMs. With the deepening of biomedical applications, it is believed that NNMMMs will inevitably play an important role in the field of human health and contribute to its promotion.

Synthesis of BiOX-Red Mud/Granulated Blast Furnace Slag Geopolymer Microspheres for Photocatalytic Degradation of Formaldehyde.

Release of formaldehyde gas indoors is a serious threat to human health. The traditional adsorption method is not stable enough for formaldehyde removal. Photocatalytic degradation of formaldehyde is effective and rapid, but photocatalysts are generally expensive and not easy to recycle. In this paper, geopolymer microspheres were applied as matrix materials for photocatalysts loading to degrade formaldehyde. Geopolymer microspheres were prepared from red mud and granulated blast furnace slag as raw materials by alkali activation. When the red mud doping was 50%, the concentration of NaOH solution was 6 mol/L, and the additive amount was 30 mL, the prepared geopolymer microspheres possessed good morphological characteristics and a large specific surface area of 38.80 m2/g. With the loading of BiOX (X = Cl, Br, I) photocatalysts on the surface of geopolymer microspheres, 85.71% of formaldehyde gas were adsorbed within 60 min. The formaldehyde degradation rate of the geopolymer microspheres loaded with BiOI reached 87.46% within 180 min, which was 23.07% higher than that of the microspheres loaded with BiOBr, and 50.50% higher than that of the microspheres loaded with BiOCl. While ensuring the efficient degradation of formaldehyde, the BiOX (X = Cl, Br, I)-loaded geopolymer microspheres are easy to recycle and can save space. This work not only promotes the resource utilization of red mud and granulated blast furnace slag, but also provides a new idea on the formation of catalysts in the process of photocatalytic degradation of formaldehyde.

Resting state functional connectome in breast cancer patients with fear of cancer recurrence.

This study aimed to investigate network-level brain functional changes in breast cancer patients and their relationship with fear of cancer recurrence (FCR). Resting-state functional MRI was collected from 43 patients with breast cancer and 40 healthy controls (HCs). Graph theory analyses, whole-brain voxel-wise functional connectivity strength (FCS) analyses and seed-based functional connectivity (FC) analyses were performed to identify connection alterations in breast cancer patients. Correlations between brain functional connections (i.e. FCS and FC) and FCR level were assessed to further reveal the neural mechanisms of FCR in breast cancer patients. Graph theory analyses indicated a decreased clustering coefficient in breast cancer patients compared to HCs (P = 0.04). Patients with breast cancer exhibited significantly higher FCS in both higher-order function networks (frontoparietal, default mode, and dorsal attention systems) and primary somatomotor networks. Among the hyperconnected regions in breast cancer, the left inferior frontal operculum demonstrated a significant positive correlation with FCR. Our findings suggest that breast cancer patients exhibit less segregation of brain function, and the left inferior frontal operculum is a key region associated with FCR. This study offers insights into the neural mechanisms of FCR in breast cancer patients at the level of brain connectome.

Complete genome sequence of the novel Antarctic Oceanisphaera sp. IT1-181 that carried five plasmids.

Bacteria of the genus Oceanisphaera in the class Gammaproteobacteria are widely distributed in marine environments. Oceanisphaera sp. IT1-181 was isolated from intertidal sediment in the coastal region of the Chinese Great Wall Station on the Fildes Peninsula, King George Island, Antarctica. Here, we sequenced the complete genome of strain IT1-181, which contained a single chromosome of 3,572,184 bp (G + C content of 49.89 mol%) with five plasmids. A total of 3229 protein-coding genes, 88 tRNA genes, and 25 rRNA genes were obtained. Genome sequence analysis revealed that strain IT1-181 was not only a potentially novel species of the genus Oceanisphaera, but also harbored genes involved in biosynthesizing ectoine as well as poly-ß-hydroxybutyric acid (PHB). In addition, genes of a complete type I-E CRISPR-Cas system were found in the bacterium. The results indicate the potential of strain Oceanisphaera sp. IT1-181 in biotechnology and are helpful for us understanding its ecological roles in the changing Antarctic intertidal zone environment.

Oxygen-deficient tungsten oxide inducing electron and proton transfer: Activating ruthenium sites for hydrogen evolution in wide pH and alkaline seawater.

The design of electrocatalysts for the hydrogen evolution reaction (HER) that perform effectively across a broad pH spectrum is paramount. The efficiency of hydrogen evolution at ruthenium (Ru) active sites, often hindered by the kinetics of water dissociation in alkaline or neutral conditions, requires further enhancement. Metal oxides, due to superior electron dynamics facilitated by oxygen vacancies (OVS) and shifts in the Fermi level, surpass carbon-based materials. In particular, tungsten oxide (WO3) promotes the directed migration of electrons and protons which significantly activates the Ru sites. Ru/WO3-OV is prepared through a simple hydrothermal and low-temperature annealing process. The prepared catalyst achieves 10 mA cm-2 at overpotentials of 23 mV (1 M KOH), 36 mV (0.5 M H2SO4), 62 mV (1 M PBS), and 38 mV (1 M KOH + seawater). At an overpotential corresponding to 10 mA cm-2 in 1 M KOH and 1 M KOH + seawater, the mass activity of Ru/WO3-OV is about 7.7 and 7.86 times that of 20 wt% Pt/C. The improvement in activity and stability arises from electronic modifications attributed to metal-support interaction. This work offers novel insights for modulating the HER activity of Ru sites across a wide pH range.

One-dimensional single atom arrays on ferroelectric nanosheets for enhanced CO2 photoreduction.

Single-atom catalysts show excellent catalytic performance because of their coordination environments and electronic configurations. However, controllable regulation of single-atom permutations still faces challenges. Herein, we demonstrate that a polarization electric field regulates single atom permutations and forms periodic one-dimensional Au single-atom arrays on ferroelectric Bi4Ti3O12 nanosheets. The Au single-atom arrays greatly lower the Gibbs free energy for CO2 conversion via Au-O=C=O-Au dual-site adsorption compared to that for Au-O=C=O single-site adsorption on Au isolated single atoms. Additionally, the Au single-atom arrays suppress the depolarization of Bi4Ti3O12, so it maintains a stronger driving force for separation and transfer of photogenerated charges. Thus, Bi4Ti3O12 with Au single-atom arrays exhibit an efficient CO production rate of 34.15 µmol·g-1·h-1, ∼18 times higher than that of pristine Bi4Ti3O12. More importantly, the polarization electric field proves to be a general tactic for the syntheses of one-dimensional Pt, Ag, Fe, Co and Ni single-atom arrays on the Bi4Ti3O12 surface.

Structural Characteristics and Cementitious Behavior of Magnesium Slag in Comparison with Granulated Blast Furnace Slag.

Magnesium slag is a type of industrial solid waste produced during the production of magnesium metal. In order to gain a deeper understanding of the structure of magnesium slag, the composition and microstructure of magnesium slag were investigated by using characterization methods such as X-ray fluorescence, particle size analysis, X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. In addition, the state of Si occurrence in magnesium slag was analyzed using a solid-state nuclear magnetic resonance technique in comparison with granulated blast furnace slag. An inductively coupled plasma-optical emission spectrometer and scanning electron microscope with energy dispersive X-ray spectroscopy were used to characterize their cementitious behavior. The results show that the chemical composition of magnesium slag mainly includes 54.71% CaO, 28.66% SiO2 and 11.82% MgO, and the content of Al2O3 is much lower than that of granulated blast furnace slag. Compared to granulated blast furnace slag, magnesium slag has a larger relative bridging oxygen number and higher [SiO4] polymerization degree. The cementitious activity of magnesium slag is lower compared to that of granulated blast furnace slag, but it can replace part of the cement to obtain higher compressive strength. Maximum compressive strength can be obtained when the amount of magnesium slag replacing cement is 20%, where the 28-day compressive strength can be up to 45.48 MPa. This work provides a relatively comprehensive analysis of the structural characteristics and cementitious behavior of magnesium slag, which is conducive to the promotion of magnesium slag utilization.