An injectable and coagulation-independent Tetra-PEG hydrogel bioadhesive for post-extraction hemostasis and alveolar bone regeneration.

Effective control of post-extraction hemorrhage and alveolar bone resorption is critical for successful extraction socket treatment, which remains an unmet clinical challenge. Herein, an injectable Tetra-PEG hydrogel that possesses rapid gelation, firm tissue adhesion, high mechanical strength, suitable degradability, and excellent biocompatibility is developed as a sutureless and coagulation-independent bioadhesive for the management of extraction sockets. Our results demonstrate that the rapid and robust adhesive sealing of the extraction socket by the Tetra-PEG hydrogel can provide reliable protection for the underlying wound and stabilize blood clots to facilitate tissue healing. In vivo experiments using an anticoagulated rat tooth extraction model show that the hydrogel significantly outperformed clinically used cotton and gelatin sponge in hemostatic efficacy, wound closure, alveolar ridge preservation, and in situ alveolar bone regeneration. Histomorphological evaluations reveal the mechanisms for accelerated bone repair through suppressed long-term inflammation, elevated collagen deposition, higher osteoblast activity, and enhanced angiogenesis. Together, our study highlights the clinical potential of the developed injectable Tetra-PEG hydrogel for treating anticoagulant-related post-extraction hemorrhage and improving socket healing.

Early implant placement versus ridge preservation and delayed implant placement: Analysis of profilometric, clinician- and patient-reported outcomes from a two-centre RCT.

OBJECTIVES: To compare early implant placement (EP) to alveolar ridge preservation and delayed implant placement (ARP/DP) in terms of contour changes, along with clinician- and patient-reported outcome measures (PROMs) until the delivery of the implant-supported restoration. MATERIALS AND METHODS: Patients with a failing single tooth in the maxilla or mandible were recruited in two centres. After tooth extraction, patients were randomly assigned (1:1) to either EP or ARP/DP. At abutment connection and crown delivery, the buccal contour changes at 3 mm below the mucosal margin (primary outcome) along with clinician- (ease of treatment) and patient-reported outcomes were assessed using numeric rating scales and OHIP-14. RESULTS: A total of 46 patients were analysed. The mean buccal contour at abutment connection decreased by -1.2 ± 0.6 mm in group EP and -1.6 ± 0.8 mm in group ARP/DP (estimated mean difference; 0.45 [95%CI, -0.02; 0.94]; p = .061) with no significant differences between the groups. ARP/DP was consistently easier than EP across all stages of the surgery (estimated mean difference; 2.0 [95%CI, 1.3; 2.7] p < .001): during flap elevation (EP: 4.8 vs. ARP/DP: 1.6), implant placement (EP: 5.7 vs. ARP/DP: 2.2) and wound closure (EP: 3.4 vs. ARP/DP: 1.6). Both interventions improved quality of life but patients who underwent ARP/DP were significantly more satisfied at the time of crown delivery (ARP/DP: 9.6 vs. EP: 9.1, p = .02). CONCLUSIONS: EP and ARP/DP show no significant differences in buccal contour changes, aesthetics and patient-reported outcomes. However, ARP/DP is an easier procedure at all stages of the surgery compared to EP and could therefore be the preferred therapy for less experienced clinicians.

Healing of Extraction Sites after Alveolar Ridge Preservation Using Advanced Platelet-Rich Fibrin: A Retrospective Study.

BACKGROUND: Over time, numerous surgical procedures and biomaterials have been proposed for the reconstruction of post-extraction bone defects, each with their advantages and disadvantages. The main objective of this study was to evaluate dimensional changes in the alveolar bone 3 months after tooth extraction, before implant planning, comparing alveolar ridge preservation (ARP) with spontaneous healing. METHODS: A total of 84 patients with non-restorable molars were included in the study. Forty-two patients received ARP with advanced platelet-rich fibrin (A-PRF) and spontaneous healing was evaluated in these patients. Cone beam computed tomography (CBCT) analysis performed before and after surgical intervention was used to determine the changes in vertical and horizontal bone dimensions produced after tooth extraction. RESULTS: CBCT measurements showed reduction in both vertical and horizontal alveolar bone size in both groups. For the study group, the alveolar parameters (height, width) were higher compared to the control group. The percentage variations between dimensional differences from the two groups were 38.58% for height, and for width were 36.88% at 0 mm, 35.56% at 3 mm, 36.61% at 5 mm, and 38.73% at 7 mm. The differences were statistically significant (p ˂ 0.0005). CONCLUSIONS: The results obtained after ARP with A-PRF showed a reduced loss of bone volume compared to spontaneous healing.

Influence of freeze-dried bone allograft on free gingival graft survival and alveolar ridge maintenance in socket seal procedures: a randomized controlled clinical trial.

PURPOSE: This study aimed to investigate the viability of free gingival grafts (FGG) and assess clinical and radiographic changes in the alveolar ridge following socket seal surgery with or without freeze-dried bone allograft (FDBA). MATERIALS AND METHODS: Twenty-eight anterior and premolar tooth extractions were randomly allocated to 2 groups: socket graft of FDBA sealed with FGG (n = 15) and control with empty sockets sealed solely with FGG (n = 13). Photographs taken at 3, 7, 14, and 30 days post-surgery assessed FGG viability. Alveolar ridge volume was clinically evaluated via intraoral scanners before surgery and at 1 and 3 months post-surgery. CBCT scans taken immediately post-surgery and 3 months later assessed alveolar ridge dimensions. RESULTS: FGG viability in both groups increased from day 3 and reached the maximum score on day 14. Alveolar ridge volume reduction at 3 months in the FDBA group was comparable to the control group. Buccal alveolar bone height reduction was significantly higher in the FDBA group than the control group, while palatal alveolar bone height was comparable. Alveolar bone width reduction was evident but not statistically significant between the groups. The FDBA group exhibited a significant alteration in bone volume compared to the control group. CONCLUSION: Viability of FGG was not affected by graft filling materials. Sealing the socket with FGG effectively preserved socket integrity and ridge volume in minor socket defects using either graft filling material or not. This study was registered on 4 January 2021 on Thai Clinical Trials Registry (TCTR20210104001).

Ultrasound-based jawbone surface quality evaluation after alveolar ridge preservation.

BACKGROUND: Bone readiness for implant placement is typically evaluated by bone quality/density on 2-dimensional radiographs and cone beam computed tomography at an arbitrary time between 3 and 6 months after tooth extraction and alveolar ridge preservation (ARP). The aim of this study is to investigate if high-frequency ultrasound (US) can classify bone readiness in humans, using micro-CT as a reference standard to obtain bone mineral density (BMD) and bone volume fraction (BVTV) of healed sockets receiving ARP in humans. METHODS: A total of 27 bone cores were harvested during the implant surgery from 24 patients who received prior extraction with ARP. US images were taken immediately before the implant surgery at a site co-registered with the tissue biopsy collection location, made possible with a specially designed guide, and then classified into 3 tiers using B-mode image criteria (1) favorable, (2) questionable, and (3) unfavorable. Bone mineral density (hydroxyapatite) and BVTV were obtained from micro-CT as the gold standard. RESULTS: Hydroxyapatite and BVTV were evaluated within the projected US slice plane and thresholded to favorable (>2200 mg/cm3; >0.45 mm3/mm3), questionable (1500-2200 mg/cm3; 0.4-0.45 mm3/mm3), and unfavorable (<1500 mg/cm3; <0.4 mm3/mm3). The present US B-mode classification inversely scales with BMD. Regression analysis showed a significant relation between US classification and BMD as well as BVTV. T-test analysis demonstrated a significant correlation between US reader scores and the gold standard. When comparing Tier 1 with the combination of Tier 2 and 3, US achieved a significant group differentiation relative to mean BMD (p = 0.004, true positive 66.7%, false positive 0%, true negative 100%, false negative 33.3%, specificity 100%, sensitivity 66.7%, receiver operating characteristics area under the curve 0.86). Similar results were found between US-derived tiers and BVTV. CONCLUSION: Preliminary data suggest US could classify jawbone surface quality that correlates with BMD/BVTV and serve as the basis for future development of US-based socket healing evaluation after ARP.

Instructions for the use of L-PRF in different clinical indications.

Autologous platelet concentrates (APCs) have demonstrated clear benefits across various clinical applications, including alveolar ridge preservation, guided tissue regeneration, guided bone regeneration, sinus floor elevation (both lateral window approach and transcrestal technique), endodontic surgery, the treatment of medication-related osteonecrosis of the jaw bones, and periodontal plastic surgery. To ensure an optimal clinical outcome, clinicians must adhere strictly to the protocol to prepare the APCs and, especially follow evidence-based surgical guidelines, often simple but crucial, to minimize the likelihood of errors. The majority of clinical trials reported on second-generation APCs [the leukocyte- and platelet-rich fibrin (L-PRF) family, including its modifications (A-PRF, A-PRF+, CGF, T-PRF, H-PRF, etc.)]. These second-generation APCs offer additional benefits compared to the first-generation APCs, making them the preferred choice for the development of clinical recommendations. These recommendations have been formulated through a meticulous examination of the available clinical data and the clinical experience of the authors of this paper.

Half- and full-grafting alveolar ridge preservation with different sealing materials: A three-arm randomized clinical trial.

OBJECTIVE: The objective of this study is to investigate the effect of different alveolar ridge preservation (ARP) approaches on bone resorption and their potential for facilitating implant placement. MATERIALS AND METHODS: Patients who underwent one or two tooth extractions with a desire for restoration were included in the study. The participants were randomly assigned to one of three groups for ARP. The groups were as follows: (1) Half grafting of bovine bone mineral (DBBM-C) covered with non-resorbable dense polytetrafluoroethylene (dPTFE) membrane (Test 1 group); (2) Half grafting of bovine bone mineral (DBBM-C) covered with collagen membrane (Test 2 group); and (3) Full grafting with collagen membrane (DBBM-C + Collagen membrane) as the Control group. After 6-month healing period, the evaluation encompassed clinical, radiographic, implant-related outcomes, and the factors contributing to hard and soft tissue alterations. RESULTS: Enrollment in this study comprised 56 patients. At the 6-month follow-up, radiographic analysis in computed beam computed tomography images was conducted for 18, 19, and 19 patients with 18, 20, and 20 tooth sites in Test 1, Test 2, and Control groups, respectively. Additionally, a total of 15, 17, and 17 patients with 15, 18, and 17 implants were evaluated. Based on radiographic analysis, all groups showed limited ridge resorption at 1 mm from crest horizontally (Test 1: 1.29 ± 1.37; Test 2: 1.07 ± 1.07; Control: 1.54 ± 1.33 mm, p = 0.328), while the Control group showed greater radiographic bone height gain in mid-crestal part vertically (Test 1: 0.11 ± 1.02; Test 2: 0.29 ± 0.83; Control: -0.46 ± 0.95 mm, p = 0.032). There were no significant intergroup differences in terms of keratinized mucosal width, bone density, insertion torque, and the need of additional bone graft. However, the use of a dPTFE membrane resulted in a significantly higher vertical mucosal thickness (Test 1: 2.67 ± 0.90; Test 2: 3.89 ± 1.08; Control: 2.41 ± 0.51 mm, p < 0.001). CONCLUSIONS: The study showed comparable dimensional preservation with limited vertical shrinkage, while thin buccal bone plate, non-molar sites, and large discrepancy between buccal and palatal/lingual height may contribute to greater shrinkage. Thicker mucosa with dPTFE membrane required further investigation for interpretation. CLINICAL TRIAL REGISTRATION NUMBER: NCT06049823. This clinical trial was not registered prior to participant recruitment and randomization.

Unconventional Dental Implant Placement Through an Impacted Maxillary Central Incisor in Stable Contact With Enamel and Dentin: A Case Report.

When edentulism is accompanied by an impacted tooth, conventional treatment usually involves traumatic tooth extraction, which would inevitably destroy the surrounding alveolar bone and cause unfavorable esthetics, especially for anterior teeth. Recently, implant placement through the impacted tooth or residual root has been proposed as an alternative to invasive extraction. A particular type of integration has been observed between dentin/cementum and titanium implant, while enamel-implant contact has not been reported. In this article, an implant was placed through the impacted maxillary central incisor, thereby avoiding an invasive extraction surgery. The buccal section of the tooth, including crown enamel, was retained in situ for buccal alveolar ridge preservation. The follow-up results were satisfactory, and a stable enamel-implant contact was observed. Combining with previous similar studies, this technique opens intriguing possibilities and brings fresh insight for the concept of dentointegration. More histological and clinical studies with long-term follow-up are warranted before endorsing this technique in routine application.

The Efficacy of Platelet-Rich Plasma as an Adjunct to Bone Grafting in Alveolar Ridge Preservation Following Tooth Extraction.

Background: Tooth extraction often results in bone loss in the alveolar ridge, which can complicate subsequent dental implant placement. Alveolar ridge preservation (ARP) techniques, such as bone grafting, aim to mitigate this bone loss. Platelet-rich plasma (PRP) has been proposed as an adjunct to bone grafting in ARP to enhance bone regeneration. Materials and Methods: A total of 60 patients requiring tooth extraction and ARP were included in this randomized controlled trial. Patients were divided into two groups: Group A received bone grafting alone, while Group B received bone grafting with PRP. Clinical and radiographic assessments were performed at baseline and 6-month postsurgery. Bone density and height were measured using arbitrary values. Results: At the 6-month follow-up, Group B demonstrated a statistically significant increase in bone density (P < 0.05) and bone height (P < 0.05) compared to Group A. The arbitrary values for bone density in Group B increased by 15% and bone height increased by 10% compared to baseline measurements. Group A showed minimal improvement. Conclusion: The incorporation of PRP as an adjunct to bone grafting in ARP following tooth extraction significantly enhances bone density and height, suggesting its efficacy in preserving the alveolar ridge.

Assessment of Postoperative Swelling and Pain Following Alveolar Ridge Preservation with Different Biomaterials: A Randomized Controlled Trial.

Background: This randomized controlled trial aimed to assess and compare postoperative swelling and pain in patients undergoing alveolar ridge preservation using RidgeMax Pro and AlveoGraft Plus. Methods: A total of 20 patients requiring tooth extraction were enrolled in this study and randomly assigned to two groups: Group A received alveolar ridge preservation with RidgeMax Pro and Group B with AlveoGraft Plus. Postoperative swelling was evaluated by measuring facial dimensions using standardized facial photographs at baseline and at 24, 48, and 72 hours postoperatively. Pain was assessed using a visual analog scale (VAS) at the same time points. Statistical analysis was performed using t-tests and repeated measures ANOVA. Results: Both RidgeMax Pro and AlveoGraft Plus demonstrated effective alveolar ridge preservation without any reported complications. In terms of postoperative swelling, Group A (RidgeMax Pro) exhibited significantly lower facial swelling compared to Group B (AlveoGraft Plus) at all time points (P < 0.05). The mean pain scores on the VAS were consistently lower in Group A than in Group B across the assessment time points (P < 0.05). The trend of reduced swelling and pain in Group A persisted throughout the 72-hour follow-up period. Conclusion: Alveolar ridge preservation with RidgeMax Pro (Trade Name: RidgeMax Pro) resulted in significantly reduced postoperative swelling and pain compared to AlveoGraft Plus (Trade Name: AlveoGraft Plus).

Learn, unlearn, and relearn post-extraction alveolar socket healing: Evolving knowledge and practices.

OBJECTIVE: This review was to offer a comprehensive analysis of currently available evidence on post-extraction alveolar socket healing, including i) the histological and molecular events during alveolar socket healing, ii) the dimensional ridge alterations after socket healing and controversies relating to sinus pneumatisation, iii) the patient-specific factors, procedural elements, and site-related variables influencing socket healing, iv) techniques and effectiveness of alveolar ridge preservation (ARP) procedure, and v) the philosophies and cost-effectiveness of ARP in clinical practice. SOURCES AND STUDY SELECTION: To investigate the dimensional profiles of the alveolar ridge following unassisted healing, an overview of systematic reviews was conducted in February 2024 by two independent reviewers. Four electronic databases were searched in Pubmed, Embase, Web of science and Cochrane Library between 2004 and 2024 to identify all relevant systematic reviews on post-extraction healing. A further manual search of reviews was also conducted. The articles were further reviewed in full text for relevance. The AMSTAR-2 appraisal tool was adopted to assess methodological quality. Current research pertaining to other listed objectives was objectively analysed in narration. DATA: 11 out of 459 retrieved studies were selected and ultimately covered in this review on the dimensional changes of alveolar ridge following natural healing: Seven systematic reviews and four systematic reviews with meta-analyses. The methodological quality of all included reviews was critically low. CONCLUSION: This review thoroughly examines the healing profiles of post-extraction alveolar sockets and highlights the dynamic process with overlapping phases and the inter-individual variability in outcomes. ARP procedure is a potential strategy for facilitating prosthetic site development, while the current evidence is limited. Herein, an individualised and prosthetically driven approach is crucial. Further well sized and designed trials with novel biomaterials need to be undertaken, and the role of artificial intelligence in predicting healing and assisting clinical decision-making could be explored. CLINICAL SIGNIFICANCE: By advancing our understanding of alveolar socket healing and its management strategies, clinicians can make more informed decisions regarding patient and site level assessment and selection, surgical techniques, and biomaterial choices, ultimately contributing to the enhanced healing process with reduced complications and improved quality of life for patients undergoing tooth extraction and dental implant treatments.

Effect of radiation cross-linked collagen scaffold in alveolar ridge preservation of extraction socket.

This study aimed to evaluate the properties of radiation cross-linked collagen scaffold (RCS) and its efficacy for alveolar ridge preservation (ARP). RCS was prepared from collagen dispersion by electron beam irradiation and freeze-drying. The microstructure, swelling ratio, area alteration and mechanical properties of RCS were characterized. Fifty-four New Zealand rabbits performing incisor extraction on maxilla and mandible were randomly assigned into positive, sham operation or treatment groups. Micro-computed tomography (micro-CT) scans, performed after 1, 4, and 12 weeks of surgery, were to assess changes in ridge height at buccal and palatal side, in ridge width and in micromorphological parameters. Histological analysis accessed socket microarchitecture. The results showed that RCS had stable mechanical properties and morphologic features that provided a reliable physical support for ARP. Dimensional changes in treatment group revealed significantly greater vertical height at buccal (5.32 [3.37, 7.26] mm, p < .0001) and palatal (4.37 [2.66, 6.09] mm, p < .0001) side, and horizontal width at the maxilla (0.16 [0.04, 0.28] mm, p < .01) and mandible (0.33 [0.11, 0.54] mm, p < .01) than those in sham operation group after 12 weeks. The treatment group had advantage than positive group in vertical height preservation, quantitatively. The order and density of bone trabeculae were improved in treatment group. These findings indicated that RCS had the potential to serve as an effective scaffold for ARP.

The adjunctive effect of polydeoxyribonucleotide on bone formation in alveolar ridge preservation: A pre-clinical in vivo study.

AIM: This study investigated the adjunctive effect of polydeoxyribonucleotide (PDRN) on bone formation in alveolar ridge preservation (ARP) sockets. MATERIALS AND METHODS: Both mandibular second, third and fourth premolars of eight beagle dogs were randomly divided into ARP and ARP/PDRN groups. Following tooth extraction, ARP procedures were conducted using collagenized alloplastic graft material and bilayer collagen membrane soaked with normal saline (ARP group) or PDRN (ARP/PDRN group) for 10 min before application. Both groups were also randomly allocated to 2-, 4- or 12-week healing subgroups. The primary endpoint of this study was to compare histomorphometric differences between ARP and ARP/PDRN. The secondary endpoints of this study were to compare micro-CT analysis and three-dimensional volumetric measurement between the two groups. RESULTS: In the histomorphometric analysis, the ARP/PDRN group exhibited greater new bone formation at coronal, middle and total position compared with the ARP group at 2-week healing. The number of newly formed blood vessels was higher in the ARP/PDRN group than in the ARP group at 2- and 4-week healing. In micro-CT analysis, the mean new bone volume/total bone volume between ARP and ARP/PDRN was statistically significant at 2-week healing. Ridge volume alterations were significantly decreased in the ARP/PDRN group during entire healing time compared with the ARP group, especially on the buccal side. CONCLUSIONS: The application of PDRN in ARP might provide additional benefits for early bone regeneration and maintenance of buccal ridge volume.

Advancements in alveolar bone grafting and ridge preservation: a narrative review on materials, techniques, and clinical outcomes.

This narrative review systematically explores the progression of materials and techniques in alveolar ridge preservation (ARP). We commence by delineating the evolution from traditional ARP methods to cutting-edge alternatives, including platelet-rich fibrin, injectable bone repair materials, and hydrogel systems. Critical examination of various studies reveals these innovative approaches not only accelerate bone healing but also significantly improve patient-reported outcomes, such as satisfaction, pain perception, and overall quality of life. Emphasis is placed on the correlation between advanced ARP techniques and enhanced patient comfort and clinical efficacy, underscoring their transformative potential in dental implantology. Highlighting the effectiveness of ARP, the implant survival rate over a span of 5 to 7 years was high, showcasing the reliability and success of these methods. Further, patients expressed high aesthetic satisfaction with the soft tissue outcome, evidenced by an average visual analog scale (VAS) score of 94. This positive aesthetic appraisal is linked to the clinical health of implants, potentially due to the employment of tooth-supported surgical guides. The economic analysis reveals a varied cost range for bone graft substitutes ($46.2 to $140) and socket sealing materials ($12 to $189), with a noteworthy correlation between the investment in barrier membranes and the diminished horizontal and vertical ridge resorption. This suggests that membrane usage significantly contributes to preserving ridge dimensions, offering a cost-effective strategy for enhancing ARP outcomes. In conclusion, this review illuminates the significant advancements in ARP, highlighting the shift towards innovative materials and techniques that not only promise enhanced bone regeneration and reduced healing times but also improve patient satisfaction and aesthetic outcomes. The documented high implant survival rate and the beneficial economic implications of membrane use further validate the effectiveness of contemporary ARP strategies, paving the way for their broader adoption in dental implantology.

A Randomized Controlled Trial Comparing Collagen Matrix to Hemostatic Gelatin Sponge as Socket Seal in Alveolar Ridge Preservation.

(1) Objectives: This study aimed to compare a collagen matrix to a hemostatic gelatin sponge as a socket seal in alveolar ridge preservation (ARP). (2) Methods: Systemically healthy patients planned for ARP at two sites with more than 50% of the buccal bone wall remaining after tooth extraction were eligible for inclusion. ARP involved socket grafting using collagen-enriched deproteinized bovine bone mineral. Sites were then randomly assigned to the test group (collagen matrix) or the control group (hemostatic gelatin sponge). The primary outcome was soft tissue thickness in the center of the site at 4 months, analyzed on cone-beam computed tomography. Secondary outcomes included the buccal and lingual soft tissue heights, horizontal bone loss, buccal soft tissue profile changes, wound dimensions, and Socket Wound Healing Score (SWHS). (3) Results: In total, 18 patients (12 females, 6 males) with a mean age of 57.3 years (SD 11.1) were included. Four months after ARP, the soft tissue thickness in the center of the site amounted to 2.48 mm (SD 0.70) in the test group and 1.81 mm (SD 0.69) in the control group. The difference of 0.67 mm (95% CI: 0.20-1.14) in favor of the collagen matrix was statistically significant (p < 0.009). The buccal soft tissue height was also statistically significantly higher for the collagen matrix (0.72 mm; 95% CI: 0.06-1.38; p = 0.034). A trend favoring the collagen matrix was found for the lingual soft tissue height (p = 0.066). No significant differences between the groups in terms of horizontal bone loss, buccal soft tissue profile changes, wound dimensions, and the SWHS were found. (4) Conclusions: The absence of significant differences in hard tissue outcomes suggests that both the collagen matrix and hemostatic gelatin sponge effectively sealed the extraction socket and supported bone preservation. However, the collagen matrix better maintained soft tissue dimensions. The clinical relevance of this finding with respect to the necessity for adjunctive soft tissue augmentation at the time of implant placement is yet to be studied.

Efficacy and safety of a new heterologous fibrin biopolymer on socket bone healing after tooth extraction: An experimental pre-clinical study.

AIM: To assess the efficacy of heterologous fibrin biopolymer (HFB) in promoting alveolar bone healing after tooth extraction in rats. MATERIALS AND METHODS: The upper right incisors of 48 Wistar rats were extracted. Toothless sockets were filled with HFB (HFBG, n = 24) or blood clot (BCG, n = 24). The tooth extraction sites were subjected to micro-computed tomography (micro-CT), histological, histomorphometric and immunohistochemical (for Runt-related transcription factor 2/Runx2 and tartrate-resistant acid phosphatase/TRAP) analyses on days 0, 7, 14 and 42 after extraction. RESULTS: Socket volume remained similar between days 0 and 14 (69 ± 5.4 mm3), except in the BCG on day 14, when it was 10% lower (p = .043). Although the number of Runx2+ osteoblasts was high and similar in both groups (34 × 102 cells/mm2), the HFBG showed lower inflammatory process and osteoclast activity than BCG at 7 days. On day 14, the number of Runx2+ osteoblasts remained high and similar to the previous period in both groups. However, osteoclast activity increased. This increase was 55% lower in the HFBG than BCG. In the BCG, the presence of an inflammatory process and larger and numerous osteoclasts on day 14 led to resorption of the alveolar bone ridge and newly formed bone. On day 42, numbers of Runx2+ osteoblast and TRAP+ osteoclasts decreased dramatically in both groups. Although the BCG exhibited a more mature cortical bone formation, it exhibited a higher socket reduction (28.3 ± 6.67%) and smaller bone volume (37 ± 5.8 mm3) compared with HFBG (socket reduction of 14.8 ± 7.14% and total bone volume of 46 ± 5.4 mm3). CONCLUSIONS: HFB effectively suppresses osteoclast activity and reduces alveolar bone resorption compared with blood clot, thus preventing three-dimensional bone loss, particularly during the early healing period. HFB emerges as a promising biopharmaceutical material for enhancing healing processes after tooth extraction.

Efficacy of Alveolar Ridge Preservation in Periodontally Compromised Molar Extraction Sites: A Systematic Review and Meta-Analysis.

AIM: To investigate the efficacy of alveolar ridge preservation (ARP) in periodontally compromised molar extraction sites. METHODS: An electronic search was performed on 10th November 2023 across five databases, seeking randomised/non-randomised controlled trials (RCTs/NCTs) that included a minimum follow-up duration of four months. The RoB2 and Robins-I tools assessed the risk of bias for the included studies. Data on alveolar ridge dimensional and volumetric changes, keratinized mucosal width, and need for additional bone augmentation for implant placement were collected. Subsequently, a meta-analysis was carried out to derive the pooled estimates. RESULTS: Six studies were incorporated in the present review, and a total of 135 molar extraction sockets in 130 subjects were included in the meta-analysis. ARP was undertaken in 68 sites, and 67 sites healed spontaneously. The follow-up time ranged from 4 to 6 months. The meta-analysis of both RCTs and NCTs showed significant differences in mid-buccal ridge width changes at 1 mm level below ridge crest with a mean difference (MD) of 3.80 (95% CI: 1.67-5.94), mid-buccal ridge height changes (MD: 2.18; 95% CI: 1.25-3.12) and volumetric changes (MD: 263.59; 95% CI: 138.44-388.74) in favour of ARP, while the certainty of evidence is graded low to very low. Moreover, ARP appeared to reduce the need for additional sinus and bone augmentation procedures at implant placement with low certainty of evidence. CONCLUSIONS: Within the limitations of this study, alveolar ridge preservation in periodontally compromised extraction sites may, to some extent, preserve the ridge vertically and horizontally with reference to spontaneous healing. However, it could not eliminate the need for additional augmentation for implant placement. Further, longitudinal studies with large sample sizes and refined protocols are needed.

A radiographic and histological study to compare red (650 nm) versus near infrared (810 nm) diode lasers photobiomodulation for alveolar socket preservation.

Previous findings indicated that the laser photobiomodulation is more effective than the control or placebo in preserving the alveolar socket. This study aimed to compare two different lasers regarding their effectiveness in aiding alveolar socket preservation. Twenty extraction sockets were selected then divided into two equal groups. Group A was exposed to 650 nm Diode laser, and Group B to 810 nm Diode laser following the same protocol and parameters after a standard alveolar socket preservation procedure with collagen plug. Radiographic analysis with cone beam computed tomography was done to compare the alveolar bone surface area immediately after extraction and three months post-operatively, while bone samples collected before implant drilling were histologically examined for newly formed bone evaluation and histomorphometric analysis in terms of percentage of new bone surface area, percentage of unmineralized bone and finally, immunohistochemical analysis of Osteocalcin reaction surface area as well as optical density. Radiographically, infrared (810 nm) Diode effect on alveolar bone surface area has significantly exceeded the red laser, while histologically, red (650 nm) Diode has demonstrated statistical significance regarding all parameters; newly formed bone surface area percentage, unmineralized bone area percentage and finally Osteocalcin bone marker reaction surface area percentage and optical density. Under the specified conditions and laser parameters, photobiomodulation using the 810 nm Diode got the upper hand radiographically, yet histologically, the red 650 nm Diode managed to dominate all histological parameters when both employed as an adjunct to alveolar socket preservation procedures.

Efficacy of autologous platelet concentrate products for alveolar preservation: A meta-analysis.

PURPOSE: The purpose of the study was to systematically evaluate the efficacy of autologous platelet concentrate products in the preservation of the alveolar ridge after tooth extraction through meta-analysis and provide a theoretical basis for the clinical application of autologous platelet concentrates to reduce alveolar bone resorption. METHODS: This study conducted a meta-analysis of clinical trials between 2013 and 2023, focusing on autologous platelet concentrate products (e.g., PRP, PRF, CGF, and PRCF) used for alveolar ridge preservation after tooth extraction. The analysis included 122 articles and 371 extraction sockets. All statistical analyses were performed using Review Manager version 5.4. RESULTS: Results indicate that these platelet concentrates effectively reduced changes in horizontal width 1 mm below the alveolar crest and vertical socket height. They also promoted a higher percentage of new bone formation in extraction sockets compared with control groups. However, they did not significantly prevent horizontal bone resorption at 3 and 5 mm below the alveolar crest. CONCLUSION: In conclusion, autologous platelet concentrates are useful for alveolar ridge preservation, but larger clinical studies are needed to confirm these findings due to the relatively small sample size in this study.

Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.