RESUMEN
In present work, blue carbon dots (b-CDs) were derived from ammonium citrate and guanidine hydrochloride, and red carbon dots (r-CDs) were stemmed from malonate, ethylenediamine and mesotetra (4-carboxyphenyl) porphin based on facile hydrothermal method. Eco-friendly ratiometric fluorescence probe was innovatively constructed to effectively measure Hg2+ utilizing b-CDs and r-CDs. The developed probe displayed two typical emission peaks at 450 nm from b-CDs and 650 nm from r-CDs under the excitation at 360 nm. Mercury ion has strong quenching effect on the fluorescence intensity at 450 nm due to the electron transfer process and the fluorescence change at 450 nm was used as the response signal, whereas the fluorescence intensity at 650 nm kept unchangeable which resulted from the chemical inertness between Hg2+ and r-CDs, serving as the reference signal in the sensing system. Under optimal circumstances, this probe exhibited an excellent linearity between the fluorescence response values of ΔF450/F650 and Hg2+ concentrations over range of 0.01-10 µmol/L, and the limit of detection was down to 5.3 nmol/L. Furthermore, this probe was successfully employed for sensing Hg2+ in practical environmental water samples with satisfied recoveries of 98.5%-105.0%. The constructed ratiometric fluorescent probe provided a rapid, environmental-friendly, reliable, and efficient platform for measuring trace Hg2+ in environmental field.
Asunto(s)
Carbono , Colorantes Fluorescentes , Mercurio , Puntos Cuánticos , Contaminantes Químicos del Agua , Mercurio/análisis , Carbono/química , Colorantes Fluorescentes/química , Contaminantes Químicos del Agua/análisis , Puntos Cuánticos/química , Monitoreo del Ambiente/métodos , Espectrometría de Fluorescencia/métodos , Límite de Detección , FluorescenciaRESUMEN
Consuming leafy vegetables with excessive thiophanate-methyl (TM) residue poses serious risks to human health. To realize rapidly and sensitively detecting TM in leafy vegetables, we developed a fluorescent probe based on zeolitic imidazolate framework-8-modified carbon dots using Hami melon as the green precursor (HM-CDs@ZIF-8). Meanwhile, the mechanism of HM-CDs@ZIF-8 for detecting TM was investigated and explained. The results of the performance tests showed that the prepared HM-CDs@ZIF-8 exhibited high sensitivity, excellent selectivity, robust anti-interference capability, reliable reproducibility and repeatability, and long-term stability. After optimization experiments, the fluorescence intensity of HM-CDs@ZIF-8 showed a strong linear correlation with the concentration of TM (0.00171-3.4239 mol/L) with a detection limit of 2.025 µmol/L. The HM-CDs@ZIF-8 was successfully applied to determine TM in spiked leafy vegetables with satisfactory recoveries of 96-105%. The relative standard deviations were in the range of 0.26-2.55%. The sensor has a promising application for detecting TM in leafy vegetables.
RESUMEN
Brain lipidic peroxidation is closely associated with the pathophysiology of various psychiatric diseases including depression. Malondialdehyde (MDA), a reactive aldehyde produced in lipid region, serves as a crucial biomarker for lipid peroxidation. However, techniques enabling real-time detection of MDA are still lacking due to the inherent trade-off between recognition dynamics and robustness. Inspired by the structure of phospholipid bilayers, amphiphilic carbon dots named as CG-CDs targeted to cell membrane are designed for real-time monitoring of MDA fluctuations. The design principle relies on the synergy of dynamic hydrogen bonding recognition and cell membrane targetability. The latter facilitates the insertion of CG-CDs into lipid regions and provides a hydrophobic environment to stabilize the labile hydrogen bonding between CG-CDs and MDA. As a result, recognition robustness and dynamics are simultaneously achieved for CG-CDs/MDA, allowing for in situ visualization of MDA kinetics in cell membrane due to the instant response (<5 s), high sensitivity (9-fold fluorescence enhancement), intrinsic reversibility (fluorescence on/off), and superior selectivity. Subsequently, CG-CDs are explored to visualize nerve cell membrane impairment in depression models of living cells and zebrafish, unveiling the extensive heterogeneity of the lipid peroxidation process and indicating a positive correlation between MDA levels and depression.
RESUMEN
Carbon dots (CDs) still suffer from unclear surface state fluorescence mechanism for fine modulation. Here, redox reactions for cathode and anode within electrochemical method are firstly employed to construct differentiated strategy for surface-state modulation, so as to obtain CDs with controllable emission in separated electrodes simultaneously. The fluorescence peaks of CDs from blue to red centered at 425 nm (mCDs-), 530 nm (mCDs+), 580 nm (oCDs-) and 665 nm (oCDs+) are mainly originated from the different bombardment effects of the ions and reaction tendencies of modifier during the electrolysis process. The phenylenediamine (as modifier) tends to introduce the amino groups on the surface of CDs- while introduced nitrogen atoms into the carbon nucleus skeleton around the anode, thus leading to much larger size and the formation of the graphite N for CDs+. It is the different surface states formed by phenylenediamine and the absorption redshift triggered by graphite N that ensures the tunable emission. The improved electrochemical method is of great significance for finely spectra modulation and efficient synthesis.
RESUMEN
Efficient delivery of nanoparticles (NPs) to plants is important for agricultural application. However, to date, we still lack knowledge about how NPs' charge matters for its translocation pathway, i.e., symplastic and apoplastic pathways, in plants. In this study, we synthesized and used negatively charged citrate sourced carbon dots (C-CDs, -37.97 ± 1.89 mV), Cy5 coated C-CDs (Cy5-C-CDs, -41.90 ± 2.55 mV), positively charged PEI coated carbon dots (P-CDs, +43.03 ± 1.71 mV), and Cy5 coated P-CDs (Cy5-P-CDs, +48.80 ± 1.21 mV) to investigate the role of surface charges and coatings on the employed translocation pathways (symplastic and apoplastic pathways) of charged NPs in plants. Our results showed that, different from the higher fluorescence intensity of P-CDs and Cy5-P-CDs in extracellular than intracellular space, the fluorescence intensity of C-CDs and Cy5-C-CDs was similar between intracellular and extracellular space in cucumber and cotton roots. It suggests that the negatively charged CDs were translocated via both symplastic and apoplastic pathways, but the positively charged CDs were mainly translocated via the apoplastic pathway. Furthermore, our results showed that root applied negatively charged C-CDs demonstrated higher leaf fluorescence than did positively charged P-CDs in both cucumber (8.09 ± 0.99 vs 3.75 ± 0.23) and cotton (7.27 ± 1.06 vs 3.23 ± 0.22), indicating that negatively charged CDs have a higher translocation efficiency from root to leaf than do positively charged CDs. It should be noted that CDs do not affect root cell activities, ROS level, and photosynthetic performance in cucumber and cotton, showing its good biocompatibility. Overall, this study not only figured out that root applied negatively charged CDs employed both symplastic and apoplastic pathways to do the transportation in roots compared with mainly the employment of apoplastic pathway for positively charge CDs, but also found that negatively charge CDs could be more efficiently translocated from root to leaf than positively charged CDs, indicating that imparting negative charge to NPs, at least CDs, matters for its efficient delivery in crops.
RESUMEN
The enzyme-mimicking nature of versatile nanomaterials proposes a new class of materials categorized as nano-enzymes, ornanozymes. They are artificial enzymes fabricated by functionalizing nanomaterials to generate active sites that can mimic enzyme-like functions. Materials extend from metals and oxides to inorganic nanoparticles possessing intrinsic enzyme-like properties. High cost, low stability, difficulty in separation, reusability, and storage issues of natural enzymes can be well addressed by nanozymes. Since 2007, more than 100 nanozymes have been reported that mimic enzymes like peroxidase, oxidase, catalase, protease, nuclease, hydrolase, superoxide dismutase, etc. In addition, several nanozymes can also exhibit multi-enzyme properties. Vast applications have been reported by exploiting the chemical, optical, and physiochemical properties offered by nanozymes. This review focuses on the reported nanozymes fabricated from a variety of materials along with their enzyme-mimicking activity involving tuning of materials such as metal nanoparticles (NPs), metal-oxide NPs, metal-organic framework (MOF), covalent organic framework (COF), and carbon-based NPs. Furthermore, diverse applications of nanozymes in biomedical research are discussed in detail.
Asunto(s)
Nanoestructuras , Nanoestructuras/química , Investigación Biomédica , Enzimas/metabolismo , Enzimas/química , Materiales Biomiméticos/química , Humanos , Estructuras Metalorgánicas/químicaRESUMEN
Fluorescent carbon dots (CDs) attract much attention due to high stability and low toxicity. For high brightness, multi-color emission and fluorescence stability, polystyrene (PS)/CDs composite films were prepared. First, three types of CDs and three PS/CDs films were prepared. Then, three light-emitting-diode (LED) devices were achieved. Compared to CDs solutions, CDs filled films show almost unchanged photoluminescence (PL) spectra. PL peaks of blue, green and red films appear at 462 nm, 544 nm and 603 nm, separately. Blue CDs lead to highest photoluminescence quantum yields (PLQYs) of 76% (solution) and 49% (film). A certain level of thermal stability and fluorescent reversibility of blue film were verified. After 60 days of air exposure, PL intensities of blue and green films reach 97% and 93% of original values, separately. Improving work time cannot vary PL wavelengths of devices. For blue-emitted device, PL intensity reaches 55% of original value after working for 600 min. For green-emitted device, PL intensity reaches 80% after working for 300 min. The novelty is effective PS encapsulation and uniform dispersion of CDs to yield favorable fluorescence properties of devices. This work inspires ideas for large-scale preparation of fluorescent films for LED digital color display.
RESUMEN
Afterglow materials possess the remarkable capability to harness the energy and subsequently emit light after irradiation is turned off. Owing to their extraordinary ultralong lifetime, afterglow materials have garnered significant interest across various domains such as sensing, optoelectronics, bioimaging, and information encryption. However, these materials typically exhibit temperature sensitivity, rendering their afterglow emission susceptible to efficient quenching at room temperature. Consequently, this study presents herein a straightforward, simple, and universal approach for synthesizing metal-free carbon dots (CDs) endowed with thermally activated delayed fluorescence (TADF) characteristics at room temperature. In this study, TADF-CDs were simply synthesized by pyrolyzing boronic acid (BA) and urea at 500 â for 3 h. Benefiting from the multi-confined effects facilitated by the robust structure of BA matrix, in conjunction with the co-doped heteroatoms of nitrogen and boron, the resultant TADF-CDs manifest remarkably prolonged afterglow TADF emission, characterized by a calculated lifetime of 184.64 ms; moreover, the blue afterglow emission remains perceptible to the naked eye for more than 6 s. The attributes of TADF-CDs were comprehensively elucidated through rigorous characterization, and the universality of the approach was corroborated through experimentation involving fourteen control CDs. Leveraging their distinctive TADF attributes, the prepared TADF-CDs were subsequently employed in advanced applications such as anti-counterfeiting and information encryption.
RESUMEN
Manufacturing whole cancer cell vaccines (WCCV) with both biosafety and efficacy is crucial for tumor immunotherapy. Pyroptotic cancer cells, due to their highly immunogenic properties, present a promising avenue for the development of WCCV. However, the successful development of WCCV based on pyroptotic cancer cells is yet to be accomplished. Here, a facile strategy that utilized photocatalytic carbon dots (CDs) to induce pyroptosis of cancer cells for fabricating WCCV is reported. Photocatalytic CDs are capable of generating substantial amounts of hydroxyl radicals and can effectively decrease cytoplasmic pH values under white light irradiation. This process efficiently triggers cancer cell pyroptosis through the reactive oxygen species (ROS)-mitochondria-caspase 3-gasdermin E pathway and the proton motive force-driven mitochondrial ATP synthesis pathway. Moreover, in vitro, these photocatalytic CDs-induced pyroptotic cancer cells (PCIP) can hyperactivate macrophage (M0-M1) with upregulation of major histocompatibility complex class II expression. In vivo, PCIP induced specific immune-preventive effects in melanoma and breast cancer mouse models through anticancer immune memory, demonstrating effective WCCV. This work provides novel insights for inducing cancer cell pyroptosis and bridges the gap in the fabrication of WCCV based on pyroptotic cancer cells.
RESUMEN
Due to the serious detrimental impact on human health, antibiotic pollution particularly tetracyclines residues has become a serious problem. Herein, a multiple response fluorescent probe consisted of dual-emission carbon dots and Eu3+ (D-CDs@Eu3+) is designed for the determination and discrimination of tetracyclines (TCs). Specifically, the carboxyl and amidogen group of dual-emission carbon dots (D-CDs) can coordinate with Eu3+ to form the D-CDs@Eu3+. Upon adding TCs, the fluorescence intensities of D-CDs at 405 nm and 495 nm are quenched due to inner filter effect (IFE) and the localization of fluorescence resonance energy transfer (L-FRET) between the D-CDs@Eu3+ and TC. Simultaneously, the D-CDs@Eu3+ may chelate with TCs to enhance the occurrence of antenna effect, while the characteristic peaks of Eu3+ at 590 nm and 615 nm are enhanced. On these bases, the TCs detection is achieved with low detection limits from 46.7 to 72.0 nM. Additionally, through the distinct efficiencies of L-FRET, the discrimination of TCs is achieved. Moreover, a novel centrifugated lateral flow assay strips (CLFASs) device is developed by integrating the D-CDs@Eu3+, lateral flow assay strips and smartphone using RGB variations for TCs detection, achieving remarkable recoveries (98.6-103.7 %) in real samples. Therefore, this CLFASs device provides a reliable approach for the TCs detection, demonstrating potential applications.
RESUMEN
The insufficient antioxidant reserves in tumor cells play a critical role in reactive oxygen species (ROS)-mediated therapeutics. Metallothionein-2 (MT-2), an intracellular cysteine-rich protein renowned for its potent antioxidant properties, is intricately involved in tumor development and correlates with a poor prognosis. Consequently, MT-2 emerges as a promising target for tumor therapy. Herein, we present the development of copper-doped carbon dots (Cu-CDs) to target MT-2 to compromise the delicate antioxidant reserves in tumor cells. These Cu-CDs with high tumor accumulation and prolonged body retention can effectively suppress tumor growth by inducing oxidative stress. Transcriptome sequencing unveils a significant decrease in MT-2 expression within the in vivo tumor samples. Further mechanical investigations demonstrate that the antitumor effect of Cu-CDs is intricately linked to apolipoprotein E (ApoE)-mediated downregulation of MT-2 expression and the collapse of the antioxidant system. The robust antitumor efficacy of Cu-CDs provides invaluable insights into developing MT-2-targeted nanomedicine for cancer therapies.
RESUMEN
A novel and sensitive fluorescence ratiometric method is developed for urea detection based on the pH-sensitive response of two fluorescent carbon dot (CD) systems: R-CDs/methyl red (MR) and NIR-CDs/Cu2+. The sensing mechanism involves breaking down urea using the enzyme urease, releasing ammonia and increasing pH. At higher pH, the fluorescence of NIR-CDs is quenched due to the enhanced interaction with Cu2+, while the fluorescence of R-CDs is restored as the acidic MR converts to its basic form, removing the inner filter effect. The ratiometric signal (F608/F750) of the R-CDs/MR and NIR-CDs/Cu2+ intensities changed in response to the pH induced by urea hydrolysis, enabling selective and sensitive urea detection. Detailed spectroscopic and morphological investigations confirmed the fluorescence probe design and elucidated the sensing mechanism. The method exhibited excellent sensitivity (0.00028 mM LOD) and linearity range (0.001 - 8.0 mM) for urea detection, with successful application in milk samples for monitoring adulteration, demonstrating negligible interference and high recovery levels (96.5% to 101.0%). This ratiometric fluorescence approach offers a robust strategy for selective urea sensing in complicated matrices.
Asunto(s)
Carbono , Cobre , Colorantes Fluorescentes , Límite de Detección , Puntos Cuánticos , Espectrometría de Fluorescencia , Urea , Ureasa , Urea/análisis , Urea/química , Ureasa/química , Cobre/química , Carbono/química , Concentración de Iones de Hidrógeno , Puntos Cuánticos/química , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia/métodos , Animales , Leche/química , Compuestos Azo/química , Contaminación de Alimentos/análisisRESUMEN
Six biomass carbon dots (BCDs) with adjustable emission from 450 to 680 nm under a single wavelength excitation were successfully synthesized from spinach via solvent control strategy. The obtained BCDs show blue, green, yellow, violet, pink, and red emission with high photoluminescence quantum yield (PLQY = 12.68 ~ 30.77%). Detailed characterizations disclose that the tunable-emission mechanism is caused by the synergistic effect of carbon conjugate and surface oxidation degree. Meanwhile, full-color photoluminescence BCDs/PVP powder and BCDs/PVP/PVA films were fabricated by utilizing the prepared BCDs combined with polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA), respectively, which presented excellent high-level information encryption application. Importantly, multi-color and white light-emitting diode (LED) with Commission Internationale de L' Eclairage (CIE) of blue (0.25, 0.29); green (0.25, 0.31); yellow (0.42, 0.45); red (0.52, 0.31); and white (0.32, 0.31) were achieved by only using our prepared BCDs. This work provides a valuable strategy of preparing multi-color BCDs using readily available biomass materials and paves a way for high-level information encryption and LED applications.
RESUMEN
Heteroatom doping has become an important method to enhance the performance of traditional carbon dots in modern times. Selenium (Se) is a nonmetallic trace element with excellent redox properties and is therefore essential for health. Previous studies have mainly used pure chemicals as selenium sources to prepare selenium-doped carbon dots (Se-CDs), but the precursor pure chemicals have the disadvantages of being expensive, difficult to obtain, toxic, and having low fluorescence yields of the synthesised Se-CDs. Fortunately, our team achieved successful synthesis of selenium carbon dots, exhibiting excellent luminescence and biocompatibility through a one-step hydrothermal method using selenium-enriched natural plant Cardamine, as an alternative to selenium chemicals. This approach aims to address the limitations and high costs associated with Se-CDs precursors. Electron spin resonance spectroscopy (ESR) and cellular antioxidant tests have confirmed the protective ability of Se-CDs against oxidative damage induced by excessive reactive oxygen species (ROS). A new concept and method for synthesizing selenium carbon dots on the basis of biomass, a rationale for the antioxidant effects on human health, and a wide range of development and application possibilities were offered in this work.
Asunto(s)
Antioxidantes , Carbono , Luminiscencia , Puntos Cuánticos , Selenio , Selenio/química , Carbono/química , Puntos Cuánticos/química , Antioxidantes/química , Antioxidantes/farmacología , Humanos , Especies Reactivas de Oxígeno/metabolismo , Plantas/química , Plantas/metabolismoRESUMEN
Multifunctional green food packaging films were developed by incorporating Koelreuteria paniculata Laxm. bract extract (KBE) and bio-waste-derived Ti-doped carbon dots (Ti-CDs) into a chitosan/locust bean gum (CG) matrix for the first time. Results from FTIR and XRD demonstrated the precise bonding of Ti-CDs to CG through a Schiff base reaction and hydrogen bonding, while KBE was effectively immobilized within the film matrix via hydrogen bonding. SEM and TGA analysis demonstrated enhanced thermal stability and density of the films. Addition of Ti-CDs synergistically improved the barrier properties and mechanical strength of the films through enhanced hydrogen bonding and Schiff base reactions. Specifically, the incorporation of 3 wt% Ti-CDs increased the oxygen barrier properties, tensile strength, water resistance, and vapor permeability of CG films by approximately 1.18, 0.75, and 1.51 times, respectively. Furthermore, the antimicrobial and antioxidant capabilities were significantly improved with the addition of KBE to films. The CG-3%CDs-KBE film coating effectively prolonged the shelf life of strawberries. Additionally, these films exhibited superior pH responsiveness and ammonia-sensitivity, enabling visual monitoring of shrimp freshness during storage. Importantly, CG-3%CDs-KBE films exhibited biodegradability in soil and displayed good biosafety. Overall, these findings underscore the promising potential of CG-3%CDs-KBE films as multifunctional green food packaging materials.
RESUMEN
A smartphone-assisted portable dual-mode immunoassay was constructed based on curcumin nanoparticles (CNPs) and carbon dots (CDs) for gentamicin (GEN) detection. CNPs were labeled with goat anti-mouse IgG (Ab2) to create a conjugation that coupled dual signals to concentrations of GEN antigens. CNPs were introduced to pH 7.4 water and showed insignificant color and optical responses. When exposed to the high pH environment, the structure of CNPs changed and color and optical properties were restored. Because of the inner filter effect (IFE) between CNPs and CDs, the fluorescence of CNPs at 550 nm quenched the fluorescence of CDs at 450 nm. Colorimetry and ratiometric fluorescence (F550 nm/F450 nm) dual-mode immunoassay linearly correlated with GEN ranged from 10-4 to 100 µg/mL with a detection limit (LOD) of 8.98 × 10-5 µg/mL and 4.66 × 10-5 µg/mL, respectively. This work supplied a portable, sensitive, and specific platform to detect GEN.
Asunto(s)
Carbono , Curcumina , Gentamicinas , Límite de Detección , Nanopartículas , Puntos Cuánticos , Teléfono Inteligente , Curcumina/química , Inmunoensayo/métodos , Carbono/química , Gentamicinas/análisis , Gentamicinas/inmunología , Gentamicinas/química , Puntos Cuánticos/química , Nanopartículas/química , Animales , RatonesRESUMEN
Food safety is a serious issue worldwide and practical detection method is vital for the supervision of food safety. It is necessary to establish efficient and economical methods to detect antibiotics, especially antibiotics in complex systems. This study employs citric acid and m-phenylenediamine to synthesize N, P-codoped carbon dots (N, P-CDs) by a microwave-assisted method. Anhydrous ethanol and phosphoric acid are essential to the properties of N, P-CDs. A "turn-on" fluorescent probe based on N, P-CDs was established for detecting ciprofloxacin (CIP) with detection limit down to 24.2 nm. Semiquantitative test stripe and a PS color detection system for CIP were developed to achieve visual and smart detection. The test stripe is applied to the visual detection of CIP residues in milk and a popular Chinese cuisine, Malatang, for the first time. N, P-CDs can also be used to detect pH in the range of pH 7.5-12.
RESUMEN
In this paper, nitrogen-doped carbon quantum dots (N-CQDs) are synthesized by the hydrothermal method. N-CQDs exhibit strong fluorescence, and N-CQDs are well dispersed in water as well as in various organic solvents. N-CQDs emit multi-color fluorescence from blue to red, with wavelengths in the range of 450-650 nm without the need for purification. Furthermore, the fluorescence emission of N-CQDs was selectively quenched after adding Fe3+ ions. N-CQDs were used as a nanoprobe for the detection of Fe3+ ions, showing a good linear correlation between the fluorescence emission and the concentration of Fe3+ in the Fe3+ concentration range from 0 to 100 µM. The limit of detection (LOD) was 55.7 µM for Fe3+ in water and 40.2 µM in fetal bovine serum (FBS) samples. The study shows that the synthesized N-CQDs have low cost and great potential for application in biological analysis.
Asunto(s)
Carbono , Hierro , Nitrógeno , Puntos Cuánticos , Puntos Cuánticos/química , Carbono/química , Nitrógeno/química , Hierro/análisis , Hierro/química , Animales , Bovinos , Espectrometría de Fluorescencia , Iones/análisis , Límite de Detección , Fluorescencia , ColorRESUMEN
The presence of trace water impurities in organic solvents can significantly influence chemical reactions and product quality; thus, the accurate detection of water content in these solvents is a critical requirement for industrial applications. Accordingly, an eco-friendly, effective, and economical sensor for detecting trace quantities of miscible water in organic solvents is required for industrial applications. In this study, we synthesized biomass-derived multi-atom-doped carbon dots (MACDs) as fluorescent probes and employed them for the detection of trace amounts of water impurities in several water-miscible organic solvents. The MACDs exhibited stable dual-color fluorescence emission under ultraviolet light irradiation and red and blue emissions in organic solvents and water. The fluorescence quantum yield was approximately 11 %, which indicates an excited intraparticle proton transfer response due to an increase in the water content within a wide response range from 0 % to 100 % (v/v) in organic solvents. The intensity of the red emission signal at 670 nm gradually decreased with an increase in the water content in the organic solvent. The MACDs could detect water with an instant response time of 55 s, a high sensitivity, and low limits of detection of 0.08 %, 1.36 %, 0.03 %, 0.04 %, 0.12 %, and 0.05 % (v/v) in ethanol, acetonitrile, dimethylformamide, methanol, isopropanol, and tetrahydrofuran, respectively. Hence, biomass-derived MACDs can serve as efficient and eco-friendly water sensors in organic solvents.
RESUMEN
Carbon dots (CDs) with good optical properties, biocompatibility, easy functionalization, and small size have attracted more and more attention and laid a good foundation for their applications in the biomedicine field. CDs emitted in near-infrared regions (NIR-CDs) can achieve high penetration depth imaging and produce high cytotoxic substance for disease treatment. Therefore, NIR-CDs are promising materials to realize high-quality imaging-guided diagnostic and therapeutic integration. This review first introduces the current mainstream synthesis methods of NIR-CDs by "top-down" and "bottom-up". Second, the luminescence modes of NIR-CDs are introduced, and the luminescence mechanisms based on carbon core state, surface state, molecular state, and crosslinking enhanced emission are summarized. Third, the applications and principles of NIR-CDs in imaging, drug delivery, and non-invasive therapeutics are introduced from a view of diagnosis and therapy. Finally, their prospects and challenges in biomedical and biotechnological applications are outlined.