Transformation of hazardous sacred incense sticks ash waste into less toxic product by sequential approach prior to their disposal into the water bodies.

Incense sticks ash is one of the most unexplored by-products generated at religious places and houses obtained after the combustion of incense sticks. Every year, tonnes of incense sticks ash is produced at religious places in India which are disposed of into the rivers and water bodies. The presence of heavy metals and high content of alkali metals challenges a potential threat to the living organism after the disposal in the river. The leaching of heavy metals and alkali metals may lead to water pollution. Besides this, incense sticks also have a high amount of calcium, silica, alumina, and ferrous along with traces of rutile and other oxides either in crystalline or amorphous phases. The incense sticks ash, heavy metals, and alkali metals can be extracted by water, mineral acids, and alkali. Ferrous can be extracted by magnetic separation, while calcium by HCl, alumina by sulfuric acid treatment, and silica by strong hydroxides like NaOH. The recovery of such elements by using acids and bases will eliminate their toxic heavy metals at the same time recovering major value-added minerals from it. Here, in the present research work, the effect on the elemental composition, morphology, crystallinity, and size of incense sticks ash particles was observed by extracting ferrous, followed by extraction of calcium by HCl and alumina by H2SO4 at 90-95 °C for 90 min. The final residue was treated with 4 M NaOH, in order to extract leachable silica at 90 °C for 90 min along with continuous stirring. The transformation of various minerals phases and microstructures of incense sticks ash (ISA) and other residues during ferrous, extraction, calcium, and alumina and silica extraction was studied using Fourier transform infrared (FTIR), dynamic light scattering (DLS), X-ray fluorescence (XRF), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and inductively coupled plasma-optical emission spectroscopy (ICP-OES). DLS was used for analyzing the size during the experiments while FTIR helped in the confirmation of the formation of new products during the treatments. From the various instrumental analyses, it was found that the toxic metals present in the initial incense sticks ash got eliminated. Besides this, the major alkali metals, i.e., Ca and Mg, got reduced during these successive treatments. Initially, there were mainly irregular shaped, micron-sized particles that were dominant in the incense sticks ash particles. Besides this, there were plenty of carbon particles left unburned during combustion. In the final residue, nanosized flowers shaped along with cuboidal micron-sized particles were dominant. present in If, such sequential techniques will be applied by the industries based on recycling of incense sticks ash, then not only the solid waste pollution will be reduced but also numerous value-added minerals like ferrous, silica, alumina calcium oxides and carbonates can be recovered from such waste. The value-added minerals could act as an economical and sustainable source of adsorbent for wastewater treatment in future.

Evaluation of respiratory function among homemakers exposed to indoor air pollution.

Indoor air contamination is a condition that can increase cardiovascular and respiratory mortality in the present-day population. Utilizing cooking exhaust in working environments, pollutants such as Polycyclic aromatic hydrocarbons (PAHs), incense sticks, cooking in fuel and kindling oven in the kitchen, and tobacco smoke are the significant reasons for indoor air contamination. The point of this study is to make mindfulness among homemakers presented to indoor air contamination. A spellbinding cross-sectional review including 100 homemaker female subjects in the age of 40-50 know about indoor air contamination. An overview was directed among 100 home creators in regard to indoor air contamination to make mindfulness. The strategy for testing done is basic arbitrary inspecting. The aftereffects of the current review showed that respondents were greatly presented to the indoor air contamination and created side effects connected with it and generally respondents in the age gathering of 40-50 years had encountered more exhaustion, dry bothersome skin, copying and aggravation of the eyes and stodgy nose, and affiliation was measurably huge. This finding revealed the indoor air toxins that can be considered to assume a part underway to infections like asthma, and so forth.

Extraction of Value-Added Minerals from Various Agricultural, Industrial and Domestic Wastes.

Environmental pollution is one of the major concerns throughout the world. The rise of industrialization has increased the generation of waste materials, causing environmental degradation and threat to the health of living beings. To overcome this problem and effectively handle waste materials, proper management skills are required. Waste as a whole is not only waste, but it also holds various valuable materials that can be used again. Such useful materials or elements need to be segregated and recovered using sustainable recovery methods. Agricultural waste, industrial waste, and household waste have the potential to generate different value-added products. More specifically, the industrial waste like fly ash, gypsum waste, and red mud can be used for the recovery of alumina, silica, and zeolites. While agricultural waste like rice husks, sugarcane bagasse, and coconut shells can be used for recovery of silica, calcium, and carbon materials. In addition, domestic waste like incense stick ash and eggshell waste that is rich in calcium can be used for the recovery of calcium-related products. In agricultural, industrial, and domestic sectors, several raw materials are used; therefore, it is of high economic interest to recover valuable minerals and to process them and convert them into merchandisable products. This will not only decrease environmental pollution, it will also provide an environmentally friendly and cost-effective approach for materials synthesis. These value-added materials can be used for medicine, cosmetics, electronics, catalysis, and environmental cleanup.

Variations and similarities in structural, chemical, and elemental properties on the ashes derived from the coal due to their combustion in open and controlled manner.

Coal fly ash (CFA) and coal-based incense sticks ash (ISA) have several similarities and differences due to the presence of coal as a common component in both of them. CFA are produced from the combustion of pulverized coal during electricity production in the thermal power plants while ISA are produced from the burning of incense sticks at religious places and at houses. A typical black colored Indian, incense sticks are mainly are comprised of coal powder or potassium nitrate, wood chip, fragrance, binder or binding agent, and bamboo sticks. The black colored incense sticks have coal powder or charcoal as a facilitator for smoother burning of incense sticks. The detailed investigation of CFA and ISA by X-ray fluorescence spectroscopy (XRF), electron diffraction spectroscopy (EDS), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), Fourier transform-infrared (FTIR), X-ray diffraction (XRD), particle size analyzer (PSA), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) revealed the morphological, chemical, and elemental properties. Both the coal based ashes comprises minerals like calcites, silicates, ferrous, alumina, and traces of Mg, Na, K, P, Ti, and numerous toxic heavy metals as confirmed by the XRF, ICP-AES, and EDS. While, microscopy revealed the presence of well-organized spherical shaped particles, namely cenospheres, plerospheres, and ferrospheres of size varying from 0.02 µm to 7 microns in CFA. Whereas, ISA particles are irregular, aggregated, calcium to carbon rich whose size varies from 60 nm to 9 microns and absence of well-organized spherical structures. The well developed and crystalline structure in CFA is due to the controlled combustion parameter in thermal power plants during the burning of coal while incense sticks (IS) burning is under uncontrolled manner. So, FTIR and XRD confirmed that the major portion of fly ash constitutes crystalline minerals whereas ISA have mainly amorphous phase minerals. CFA have ferrospheres of both rough and smooth surfaced, which was absent from the ISA and hence ferrous particles of CFA are of high magnetic strength. The detailed investigation of ashes will lead to the applications of ashes in new fields, which will minimize the solid waste pollution in the environment.

Multi-response optimization toward efficient and clean (co-)combustions of textile dyeing sludge and second-generation feedstock.

The rapid growth of textile dyeing sludge (TDS) necessitates feeding it back into a circular economy in an efficient and clean way. This study aimed to optimize the clean and efficient operational conditions to co-combust TDS and incense sticks (IS). The (co-)-combustions exhibited four distinctive stages of thermal degradation. According to the master-plots method, the reaction mechanisms of reaction order (F2.4 and F1.5), three-dimensional diffusion (D3), and nucleation growth (A1.5) best explained the four stages, respectively. The interaction between TDS and IS exerted an inhibition effect in the range of 400-500 °C and a facilitation effect in the range of 600-1000 °C. At 300 °C as the main reaction temperature, the main evolved gas and functional groups such as CO2, H2O, CH4, CË­O, C-O, and C-H were detected. The addition of IS improved the comprehensive combustion index, inhibited SO2, but enhanced CO2, HCN, and NOx emissions. CaO in IS enabled Fe to remain in TDS and fixed more S in ash. Multi-response optimizations based on the best-fit artificial neural networks revealed the range of 545-605 °C and the co-combustion of 25% TDS and 75% IS as the cleaner and more efficient operational conditions.

Species identification of Indonesian agarwood using a DNA-barcoding method.

Agarwood is a type of resinous wood found in the trunks of Aquilaria and some other genera. It is widely used as an herbal medicine for sedation, detoxification, and treatment of stomachaches, as well as for incense sticks. However, the number of source plants is decreasing, and in 2005, they were added to Appendix II of the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). To identify source species of agarwood, we previously developed a DNA-barcoding method using resin deposition sites. In this study, to identify additional agarwood source species, the barcoding method was applied to source plants and commercial agarwood samples collected from Sumbawa, Lombok, Sulawesi, and Kalimantan in Indonesia, a major agarwood-producing country. In addition, the method was also applied to incense stick samples labeled as agarwood. As a result, several samples were identified as Gyrinops, which is not currently listed as an agarwood source plant in the Japanese standards for non-Pharmacopoeial crude drugs 2018 (Non-JPS 2018). From the viewpoint of securing future resources, these findings suggest that Gyrinops species should, therefore, be added to the list of agarwood source species.