Prevalence of consumption of mechanically separated meat, consumer profile, nutrient intake and food choices among manufacturing workers in Northeastern Brazil.

Mechanically separated meat (MSM) is widely used in the food industry, however, there is a lack of studies on its consumption in populations. The objective of this study was to identify the frequency and amount of MSM consumption, factors associated with MSM consumption, nutrient intake and preferential choice of food groups among MSM consumers. This was an observational, cross-sectional prospective study based on a probability sample of manufacturing workers, conducted in Brazil. Logistic and linear multiple regression with robust standard errors were used. 921 workers from 33 manufacturing companies were studied, with an average age of 38.2 ± 10.7 years, 55.9% males. MSM products are consumed by 28.8% and represent in average 10% of total daily caloric intake, and 47.3% of the daily kcal from ultra-processed products. Younger age and greater waist circumference are associated with MSM consumption. Younger age and lesser educational level are associated with increased contribution of MSM to total daily kcal intake. MSM consumers have greater consumption of energy, fats, carbohydrates and sodium. Their dietary patterns are characterized by lower consumption of in natura and minimally processed foods, such as tubers and roots, fruits, white and red meat, and eggs and greater consumption of ultra-processed foods and beverages.

Determination of Calcium in Meat Products by Automatic Titration with 1,2-Diaminocyclohexane-N,N,N',N'-tetraacetic Acid.

Mechanically separated meat (MSM) is a by-product of the poultry industry that requires routine quality assessment. Calcium content is an indirect indicator of bone debris in MSM but is difficult to determine by EDTA titration due to the poor solubility of calcium phosphate. Therefore, 1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid was used instead, which has two orders of magnitude higher affinity for calcium ions. In addition, the auxiliary complexing agents triethanolamine and Arsenazo III, an indicator that is sensitive to low calcium concentrations, were used. Automatic titration endpoint detection was performed using an immersion probe at 660 nm. It has been shown that the color change in Arsenazo III can also be read with an RGB camera. The CDTA titration procedure has been tested on commercial Bologna-type sausages and the results were in line with AAS and ICP reference data. The content of calcium in sausages turned out to be very diverse and weakly correlated with the content of MSM. The tested MSM samples had a wide range of calcium content: from 62 to 2833 ppm. Calcium-rich poultry by-products include fat and skin (115 to 412 ppm), articular cartilage (1069 to 1704 ppm), and tendons (532 to 34,539 ppm). The CDTA titration procedure is fully suitable for small meat processing plants due to its simplicity of use and low cost.

Study of the effect of canola proteins-xanthan based Pickering emulsion as animal fat replacer in a food matrix produced from mechanically separated meat.

Pickering emulsions stabilized by protein microgel, and hydrocolloid have shown desirable properties to be used as animal fat replacers. However, the potential applications of these structures as animal fat replacers in meat systems formulations have not been explored yet. Therefore, novel Pickering emulsions stabilized by canola proteins microgels and xanthan gum were developed, and their potential as animal fat replacer in meat systems was assessed for the first time. In the present study, 25, 50, 75, and 100% animal fat content were replaced by Pickering emulsion. Moreover, the obtained results revealed that complete fat replacement with canola proteins-based Pickering emulsion in meat emulsion improved its nutritional value by significantly enhancing the percentage of protein, monounsaturated and polyunsaturated fatty acid composition, and reduction of saturated fatty acid content compared to control (100% animal fat). Reformulation with PEs enhanced the meat systems' technological behavior such as emulsion stability and cooking loss, and oxidative stability. Also, significant total color difference (ΔE *) was observed only in samples with 100% fat replacement. Meat systems containing fat replacement ≤50% showed the closest texture parameters to the control sample. This study provides a promising alternative to replace animal fat with plant-based ingredients in meat systems.

Application of Density Measurements for Discrimination and Evaluation of Chemical Composition of Different Types of Mechanically Separated Meat (MSM).

At present, the problem of identifying and controlling different types of Mechanically Separated Meat (MSM) is a very important practical issue in the meat industry. To address this challenge, the authors propose a new, analytical method for the discrimination and characterization of MSM that uses density measurements. The method proposed by the authors, in contrast to the analytical methods existing so far, is rapid, non-destructive, relatively simple and can be computerized. The density measurements of meat samples were conducted with a modified pycnometric method. Statistically significant (p<0.01) differences were found in the evaluated mean values of density for all investigated types of meat. Subsequently, the density measurements were correlated with the physicochemical properties of meat samples. A high correlation coefficient was found between the density of meat samples and the content of protein, sodium and fat. The authors have proven that density measurements allow for rapid discrimination of various types of MSM, and can also be effectively used to determine the chemical composition of MSM samples, e.g., the content of protein, fat and sodium.

Identification of mechanically separated meat using multivariate analysis of 43 trace elements detected by inductively coupled mass spectrometry: A validated approach.

The European Food Safety Authority asked for novel approaches for identifying mechanically separated meat (MSM) in meat products, due to food safety concern. In this study, a novel approach based on multivariate analysis of 43 trace elements in meat products is described. Overall, 27 trace elements and 16 rare earth elements were determined by using ICP-MS after sample mineralization of 100 meat samples, composed of different percentages of MSM, obtained at low and high pressure, and without MSM. After development and optimization, the multivariate approach was validated by analyzing and then classifying 10 "blind" meat samples, obtaining method accuracy equal to 90%. Thus, the applicability of this new analytical approach was demonstrated. The method represents a significant improvement for this type of determination, especially when MSM is obtained at low pressure, since this product is characterized by chemical characteristics very similar to fresh meat.

Identification and investigation of mechanically separated meat (MSM) with an innovative ultrasonic method.

An innovative analytical ultrasonic method for identification and investigation of Mechanically Separated Meat (MSM) samples is presented. To this end, the ultrasonic wave velocity (f=5MHz) in the investigated meat samples was measured. The measured ultrasonic velocity ranged from 1553.4 to 1589.9 m/s. The investigations were performed for: 1) minced hand deboned chicken fillets, 2) low pressure MSM from chicken carcasses, 3) low pressure MSM from chicken collarbones, 4) high pressure MSM from chicken carcasses and 5) high pressure MSM from chicken collarbones. Statistically significant (p<0.001) differences in the ultrasonic velocity were observed for each of investigated kinds of meat. High significant correlations were found between the ultrasonic velocity and the content of protein, fat, sodium and density of the investigated meat. The applicability of the developed ultrasonic method for identifying various kinds of meat and to determine the content of protein, fat, sodium and density was demonstrated.

Innovative approaches for identifying a mechanically separated meat: evaluation of radiostrontium levels and development of a new tool of investigation.

Due to food safety concerns, the European Food Safety Authority (EFSA) asked to identify useful parameters for identifying the mechanically separated meat (MSM). In this work, the 90Sr levels of MSM products were assessed for evaluating the suitability of this parameter for MSM identification. Indeed, this contaminant may accumulate in animal bones and bone fragments may be present in MSM. One hundred samples of fresh meats and meat products composed of different MSM percentages and without MSM were analyzed by ultra-low-level liquid scintillation counting. The 90Sr activity concentrations detected in meat products with high percentage of MSM were significantly higher (p ≥ 0.05) (0.099 Bq kg-1) than those of fresh meats (0.024 Bq kg-1) and meat products containing low percentage of MSM (0.011 Bq kg-1). The percentage of correct MSM identification was 61%. In order to increase this percentage and to develop a new tool of investigation, the 90Sr was elaborated in combination with other three parameters: 88Sr, Ca and ash percentage, through a multivariate approach. The precision of this tool of investigation was significantly increased (87%), higher than the reference method (Ca level) (76%), representing a valid novel approach in the identification of MSM products.

The use of bioactive properties of sage preparations to improve the storage stability of low-pressure mechanically separated meat from chickens2.

The aim of this study was to determine the effect of Salvia officinalis L. (sage) preparations on the storage stability of vacuum-packed low-pressure mechanically separated meat (MSM) from chickens stored at -18°C for 9 mo. Chilled low-pressure MSM coming from 4 production batches was obtained from the plant located in north-eastern Poland. All sage preparations-a water extract, ethanol extracts, and an essential oil-were prepared and added to the MSM under laboratory conditions. Five samples of low-pressure MSM were prepared that differed in terms of the type of sage preparation added: control-without addition of sage, WE-2.0% addition of water extract from sage, E40-2.0% addition of 40% (vol/vol) ethanol extract from sage, E70-2.0% addition of 70% (vol/vol) ethanol extract from sage, and EOS-0.1% addition of essential oil from sage. The MSM samples were assessed immediately after arrival into the laboratory and after 1, 2, 3, 4, 6, and 9 mo of storage. The quality changes of MSM samples were determined on the basis of the thiobarbituric acid reactive substances (TBARS) index and microbial analyses. On the basis of the TBARS index it was proved that addition of essential oil and (40% and 70% (vol/vol)) as well as water extracts of sage significantly (P < 0.05) slowed down fat oxidation processes in low-pressure MSM from chickens. The growth of mesophilic aerobic bacteria and psychrotrophic bacteria, coliforms, and Enterobacteriaceae was significantly (P < 0.05) restricted by all sage preparations tested. The most effective inhibitory effect for groups of bacteria analyzed in this study was demonstrated by sage essential oil, despite insignificant (P > 0.05) differences between the preparations. In conclusion, it was found that sage preparations are rich in bioactive compounds. Due to their antioxidant and antibacterial properties, especially sage oil and ethanol extracts may be recommended as an auxiliary factor to prolong the storage stability of frozen, vacuum-packed low-pressure MSM from chickens.

Optimization of parameters for obtaining surimi-like material from mechanically separated chicken meat using response surface methodology.

Surimi is a semi-processed washed fish mince protein concentrate mixed with cryoprotectants for frozen storage, which is the primary constituent of processed foods. Mechanically separated chicken meat (MSCM) is a common ingredient of comminuted sausages mainly due to its low price. The present work aimed to define the adequate parameters to obtain surimi-like material from MSCM using response surface methodology, and to characterize the chemical and textural properties of this product. The MSCM was utilized in the elaboration of surimi-like material using the bleaching method with sodium bicarbonate and sodium chloride solutions. For this purpose, the effect of process parameters viz: temperature (T = 2, 7, and 12 °C), time (t = 5, 10, and 15 min/cycles) and washing solution:MSCM ratio (R = 2:1, 4:1, and 6:1 w/w) were evaluated using response surface methodology. The highest composite design averages obtained were 10.7 % for protein content, 1,003.4 g for breaking force, 645.8 g.cm for gel strength, 9.0 N for cutting strength, and 24.1 N.s for work of shearing at the optimum combination of processing conditions of 7 °C, 10 min and 4:1 washing solution:MSCM ratio, corresponding to the central points of the proposed experimental design. The obtained models had high determination coefficients, explaining 95.85, 98.23, 98.41, and 96.08 % of total variability in protein content, cutting strength, breaking force, and work of shearing variabilities, respectively. According to the folding test the surimi-like material presented the same characteristics of a high quality surimi (FT = 5).

Low-fat frankfurters from protein concentrates of tilapia viscera and mechanically separated tilapia meat.

In order to develop a healthy low-fat frankfurter-type sausage, different formulations were developed with tilapia viscera surimi (T1) and two with mechanically separated tilapia meat (MSTM) surimi (T2 and T3), all without pig lard addition. Due to technological problems observed for T1 sausage during cooking, it was not further investigated. The functionality of the other two formulations was evaluated based on proximate composition, pH, water activity, and texture. Finally, microbiological and sensory analyses based on acceptance tests were performed. Listeria monocytogenes and Salmonella spp. were found to be absent. T2 showed higher frequencies for the attributes color (90.0%) and overall acceptability (86.7%), while T3 showed higher frequencies for taste (86.7%) and texture (96.7%). The surimi concentration was reflected in the physical properties of the sausages. It was found that the addition of MSTM surimi to sausage favored greater cutting strength (3.9 N for T2 and 4.9 N for T3). Beyond the surimi utilization, the total replacement of pig lard by cassava starch and soybean protein had also contributed with the texture properties.