NIR-Responsive injectable hydrogel cross-linked by homobifunctional PEG for photo-hyperthermia of melanoma, antibacterial wound healing, and preventing post-operative adhesion.

Current therapeutic approaches for skin cancer face significant challenges, including wound infection, delayed skin regeneration, and tumor recurrence. To overcome these challenges, an injectable adhesive near-infrared (NIR)-responsive hydrogel with time-dependent enhancement in viscosity is developed for combined melanoma therapy and antibacterial wound healing acceleration. The multifunctional hydrogel is prepared through the chemical crosslinking between poly(methyl vinyl ether-alt-maleic acid) and gelatin, followed by the incorporation of CuO nanosheets and allantoin. The synergistic inherent antibacterial potential of CuO nanosheets, the regenerative and smoothing effect of allantoin, the extracellular matrix-mimicking effect of gelatin, and the desirable swelling behavior of the hydrogel results in fast wound recovery after photothermal ablation of the tumor. Additionally, the hydrogel can serve as an alternative to sutures owing to its tissue adhesiveness ability, which can further render it the merits for accelerated repair of abdominal lesions while acting as a biocompatible barrier to prevent peritoneal adhesion.

Superparamagnetic iron oxide nanoparticle regulates microbiota-gut-inner ear axis for hearing protection.

Noise-induced hearing loss (NIHL) is a highly prevalent form of sensorineural hearing damage that has significant negative effects on individuals of all ages and there are no effective drugs approved by the US Food and Drug Administration. In this study, we unveil the potential of superparamagnetic iron oxide nanoparticle assembly (SPIOCA) to reshape the dysbiosis of gut microbiota for treating NIHL. This modulation inhibits intestinal inflammation and oxidative stress responses, protecting the integrity of the intestinal barrier. Consequently, it reduces the transportation of pathogens and inflammatory factors from the bloodstream to the cochlea. Additionally, gut microbiota-modulated SPIOCA-induced metabolic reprogramming in the gut-inner ear axis mainly depends on the regulation of the sphingolipid metabolic pathway, which further contributes to the restoration of hearing function. Our study confirms the role of the microbiota-gut-inner ear axis in NIHL and provides a novel alternative for the treatment of NIHL and other microbiota dysbiosis-related diseases.

Bacterial diseases of Asian sea bass (Lates calcarifer): A review for health management strategies and future aquaculture sustainability.

The advent of aquaculture has been one of the most significant shifts in world food supply during the last century. Aquaculture has rapidly expanded and become a global food industry, spurred by population expansion, increased seafood consumption, and decreased captured fisheries. Nonetheless, the exponential growth of aquaculture has emerged as a significant contributor to anthropogenic changes. Unexpectedly, the result has focused in the emergence and spread of new diseases. The Asian sea bass (Lates calcarifer) is an economically important species in aquaculture, contributing significantly to the global seafood market. However, bacterial diseases have emerged as a major concern, affecting both wild and cultured populations of this species. The most prevalent bacterial pathogens are streptococcus, vibriosis, nocardiosis, tenacibaculosis, and pot-belly disease. Therefore, this review aims to comprehensively analyze both emerging and non-emerging bacterial diseases affecting L. calcarifer and explore potential management approaches for their control. Through an extensive literature survey and critical evaluation of research findings, this review highlights the current understanding of bacterial diseases in L. calcarifer and proposes strategies for better disease management. In addition, this review looks at the rise and characteristics of aquaculture, the major bacterial pathogens of L. calcarifer and their effects, and the specific attributes of disease emergence in an aquatic rather than terrestrial context. It also considers the potential for future disease emergence in L. calcarifer due to aquaculture expansion and climate changes.

Ag/Au-incorporated trimethyl chitosan-shell hybrid particles as reinforcing and antioxidant fillers for trimethyl chitosan hydrogel.

N,N,N-Trimethyl chitosan (TMC) is a quaternized chitosan with versatile biological features. However, low mechanical strength limits its uses, for example, as hydrogels for tissue engineering applications. This study illustrates a viable synthesis of metal/polymer hybrid, core-shell colloidal particles and their use as reinforcing and antioxidant fillers for TMC hydrogels. The core-shell particles were initially synthesized by surfactant-free emulsion polymerization, induced by a photo-redox initiating system of riboflavin assisted by a 3° amine and 2° alcohol co-initiators. The synthesized core-shell particles were based on two polymeric shells: TMC and chitosan, and two polymeric cores: poly (hydroxypropyl methacrylate) (PHPMA) and poly(2-hydroxy ethyl methacrylate) (PHEMA). The presence of both 3° amine on TMC and 2° alcohol on HPMA monomer enhanced the photopolymerization performance. The TMC-based particles had sizes of 122-154 nm and zeta potentials of 10-35 mV, bringing the colloidal stability in the 4-10 pH range. Furthermore, due to the presence of TMC on the shell layer, the core-shell particles could be used as templates to grow the Ag/Au bimetallic nanoparticles with alloy and core-shell types through a thermal reduction. The prepared hybrid particles were incorporated in TMC hydrogels as a multifunctional filler, improving their mechanical and antioxidant properties.

Encapsulation of chrysin and rutin using self-assembled nanoparticles of debranched quinoa, maize, and waxy maize starches.

Chrysin and rutin are natural polyphenols with multifaceted biological activities but their applications face challenges in bioavailability. Encapsulation using starch nanoparticles (SNPs) presents a promising approach to overcome the limitations. In this study, chrysin and rutin were encapsulated into self-assembled SNPs derived from quinoa (Q), maize (M), and waxy maize (WM) starches using enzyme-hydrolysis. Encapsulation efficiencies ranged from 74.3 % to 79.1 %, with QSNPs showing superior performance. Simulated in vitro digestion revealed sustained release and higher antioxidant activity in QSNPs compared to MSNPs and WMSNPs. Variations in encapsulation properties among SNPs from different sources were attributed to the differences in the structural properties of the starches. The encapsulated SNPs exhibited excellent stability, retaining over 90 % of chrysin and 85 % of rutin after 15 days of storage. These findings underscore the potential of SNP encapsulation to enhance the functionalities of chrysin and rutin, facilitating the development of fortified functional foods with enhanced bioavailability and health benefits.

Vaccine process technology-A decade of progress.

In the past decade, new approaches to the discovery and development of vaccines have transformed the field. Advances during the COVID-19 pandemic allowed the production of billions of vaccine doses per year using novel platforms such as messenger RNA and viral vectors. Improvements in the analytical toolbox, equipment, and bioprocess technology have made it possible to achieve both unprecedented speed in vaccine development and scale of vaccine manufacturing. Macromolecular structure-function characterization technologies, combined with improved modeling and data analysis, enable quantitative evaluation of vaccine formulations at single-particle resolution and guided design of vaccine drug substances and drug products. These advances play a major role in precise assessment of critical quality attributes of vaccines delivered by newer platforms. Innovations in label-free and immunoassay technologies aid in the characterization of antigenic sites and the development of robust in vitro potency assays. These methods, along with molecular techniques such as next-generation sequencing, will accelerate characterization and release of vaccines delivered by all platforms. Process analytical technologies for real-time monitoring and optimization of process steps enable the implementation of quality-by-design principles and faster release of vaccine products. In the next decade, the field of vaccine discovery and development will continue to advance, bringing together new technologies, methods, and platforms to improve human health.

Unveiling the potential of chitosan-coated lipid nanoparticles in drug delivery for management of critical illness: a review.

Chitosan (CT), a natural, cationic, chemically stable molecule, biocompatible, biodegradable, nontoxic, polysaccharide derived from the deacetylation of chitin, has very uniquely surfaced as a material of promise for drug delivery and biomedical applications. For the oral, ocular, cutaneous, pulmonary, and nose-to-brain routes, CT-coated nanoparticles (CTCNPs) have numerous advantages, consisting of improved controlled drug release, physicochemical stability, improved cell and tissue interactions, and increased bioavailability and efficacy of the active ingredient. CTCNPs have a broad range of therapeutic properties including anticancer, antiviral, antifungal, anti-inflammatory, antibacterial properties, treating neurological disorders, and other diseases. This has led to substantial research into the many potential uses of CT as a drug delivery vehicle. CT has also been employed in a wide range of biomedical processes, including bone and cartilage tissue regeneration, ocular tissue regeneration, periodontal tissue regeneration, heart tissue regeneration, and wound healing. Additionally, CT has been used in cosmeceutical, bioimaging, immunization, and gene transfer applications. CT exhibits a number of biological activities, which are the basis for its remarkable potential for use as a drug delivery vehicle, and these activities are covered in detail in this article. The alterations applied to CT to obtain the necessary properties have been described.

A Critical Review on Recent Progress of Solution-Processed Monolayer Assembly of Nanomaterials and Applications.

The rapid development in nanotechnology has necessitated accurate and efficient assembly strategies for nanomaterials. Monolayer assembly of nanomaterials (MAN) represents a challenging and important architecture to manufacture and is critical in understanding interactions among nanomaterials, solvents, and substrates. MAN enables highly tunable performance in electronic and photonic devices. This review summarizes the recent progress on the methods to achieve MAN and discusses important control factors. Moreover, the importance of MAN is elaborated by a broad range of applications in electronics and photonics. In the end, the opportunities as well as challenges in manufacturing and new applications are outlooked.

Increasing the radiation-induced cytotoxicity by silver nanoparticles and docetaxel in prostate cancer cells.

BACKGROUND: Radiation therapy is utilized for treatment of localized prostate cancer. Nevertheless, cancerous cells frequently develop radiation resistance. While higher radiation doses have not always been effective, radiosensitizers have been extensively studied for their ability to enhance the cytotoxic effects of radiation. So, this study aims to evaluate the possible radiosensitization effects of docetaxel (DTX) and silver nanoparticles (SNP) in LNCaP cells. METHODS: The cytotoxic effects of DTX, SNP and 2 Gy of X-Ray radiation treatments were assessed in human LNCaP cell line using the MTT test after 24 h. Moreover, the effects of DTX, SNP and radiation on Epidermal growth factor (EGF), Caspase 3, inducible nitric oxide synthase and E-cadherin gene expression were analyzed using the Real-time PCR method. The level of Hydrogen peroxide (H2O2), an oxidative stress marker, was also detected 24 h after various single and combined treatments. RESULTS: The combinations of SNP (in low toxic concentration) and/or DTX (0.25× IC50 and 0.5 × IC50 concentrations for triple and double combinations respectively) with radiation induced significant cytotoxicity in LNCaP cells in comparison to monotherapies. These cytotoxic effects were associated with the downregulation of EGF mRNA. Additionally, H2O2 levels increased after Radiation + SNP + DTX triple combination and double combinations including Radiation + SNP and Radiation + DTX versus single treatments. The triple combination treatment also increased Caspase 3 and and E-cadherin mRNA levels in compared to single treatments in LNCaP cells. CONCLUSION: Our results indicate that the combination of SNP and DTX with radiation induces significant anti-cancer effects. Upregulation of Caspase 3 and E-cadherin gene expression, and decreased mRNA expression level of EGF may be exerted specifically by use of this combination versus single treatments.

Green Synthesis of Silver Nanoparticles and their Potential Applications in Mitigating Cancer.

In recent years, the field of nanotechnology has brought about significant advancements that have transformed the landscape of disease diagnosis, prevention, and treatment, particularly in the realm of medical science. Among the various approaches to nanoparticle synthesis, the green synthesis method has garnered increasing attention. Silver nanoparticles (AgNPs) have emerged as particularly noteworthy nanomaterials within the spectrum of metallic nanoparticles employed for biomedical applications. AgNPs possess several key attributes that make them highly valuable in the biomedical field. They are biocompatible, cost-effective, and environmentally friendly, rendering them suitable for various bioengineering and biomedical applications. Notably, AgNPs have found a prominent role in the domain of cancer diagnosis. Research investigations have provided evidence of AgNPs' anticancer activity, which involves mechanisms such as DNA damage, cell cycle arrest, induction of apoptosis, and the regulation of specific cytokine genes. The synthesis of AgNPs primarily involves the reduction of silver ions by reducing agents. Interestingly, natural products and living organisms have proven to be effective sources for the generation of precursor materials used in AgNP synthesis. This comprehensive review aims to summarize the key aspects of AgNPs, including their characterization, properties, and recent advancements in the field of biogenic AgNP synthesis. Furthermore, the review highlights the potential applications of these nanoparticles in combating cancer.

Comet Assay and Micronucleus Test in Circulating Erythrocytes of Ctenopharyngodon idella Exposed to Nickel Oxide Nanoparticles.

The number of pollutants released into freshwater and marine environments has increased due to the widespread use of nanoparticles. Nickel oxide nanoparticles (NiO-NPs) were tested for genotoxicity in fish fingerlings of the species Ctenopharyngodon idella. For 7, 14, and 21 days, fingerlings were exposed to NiO-NPs with each increasing concentrations of 2.25 mg/L, 4.50 mg/L, and 6.75 mg/L, respectively. The micronuclei assay and comet assay were used to evaluate the DNA damage. The experiment revealed that with the increase in nanoparticle concentration and exposure duration, the level of DNA damage also increased. The experiment resulted to be time and dose dependent, and the damage was found as follows: 6.75 mg/L > 4.50 mg/L > 2.25 mg/L against each exposure period. In terms of comet assay, the results showed that after 7 days, the level of DNA damage in all the concentrations was highly significant (P < 0.001). Increased DNA damage was calculated at the higher administered dose of 6.75 mg/L for 21 days of exposition, followed by 14 and 7 days, respectively. The second high toxic effect was observed in the fish blood at the exposure concentration of 4.50 mg/L for 21 days, followed by 14 and 7 days, respectively. The micronuclei induction in the nanoparticle's administered blood could be detected only for a 7-day exposition period. Whereas for the exposed duration of 14 and 21 days, the entire red blood cells of the grass carp were completely destroyed demonstrating the ability of the nanoparticles to cause anomalies in aquatic life.

Newly designed nanoparticle-drug delivery systems against Staphylococcus aureus infection: a systematic review.

A nanoparticle-drug delivery system against Staphylococcus aureus, especially Methicillin-resistant staphylococcus aureus, has been recently proposed as an alternative pathway therapy. Methicillin-resistant staphylococcus aureus is resistance to many antibiotics, making it a a threat to human life, especially for older and immunocompromised people. Treatment of Multidrug-resistant staphylococcus aureus is considered an urgent need. A variety of kinds of nanoparticle-drug delivery systems with different compositions, and biological properties have been extensively investigated against Staphylococcus aureus. This review summarizes the novel nanoparticle-drug delivery systems against Staphylococcus aureus. These nanoparticle-drug delivery systems could reduce antibiotic resistance and minimize side effects of the antibiotics. Also, they can deliver a high concentration of the drugs and eliminate the bacteria in a specific and targeted site of infection. Despite these benefits of nanoparticle-drug delivery systems, the cytotoxicity, stress oxidative, genotoxicity, and inflammation that may occur in vivo and in vitro should not be ignored. Therefore, we need a better knowledge of the pharmacological properties and safety concerns of nanoparticle-drug delivery systems. The limitations of each nanoparticle-drug delivery system with high therapeutic potential have to be considered for further design.

Synthesis and Properties of A Strained Triple Nanohoop.

A strained triple nanohoop with a shared central benzene unit is synthesized using a threefold intramolecular ring-closing approach. Among the five possible constitutional isomers, the isomer with the highest D3h symmetry is isolated, the structure of which contains three nanohoop blades and a central hexaphenylbenzene unit. The structure is elucidated using NMR spectroscopy and mass spectrometry. The optical and electrochemical properties are investigated, revealing a moderate fluorescence quantum yield of 40%. A water-soluble nanomaterial is prepared using a nanoparticle encapsulation method, and a fluorescence quantum yield of 10% is retained, which demonstrates the potential of the nanomaterial in biological systems.

Role and uptake of metal-based nanoconstructs as targeted therapeutic carriers for rheumatoid arthritis.

Rheumatoid Arthritis (RA) is a chronic autoimmune systemic inflammatory disease that affects the joints and other vital organs and diminishes the quality of life. The current developments and innovative treatment options have significantly slowed disease progression and improved their quality of life. Medicaments can be delivered to the inflamed synovium via nanoparticle systems, minimizing systemic and undesirable side effects. Numerous nanoparticles such as polymeric, liposomal, and metallic nanoparticles reported are impending as a good carrier with therapeutic properties. Other issues to be considered along are nontoxicity, nanosize, charge, optical property, and ease of high surface functionalization that make them suitable carriers for drug delivery. Metallic nanoparticles (MNPs) (such as silver, gold, zinc, iron, titanium oxide, and selenium) not only act as good carrier with desired optical property, and high surface modification ability but also have their own therapeutical potential such as anti-oxidant, anti-inflammatory, and anti-arthritic properties, making them one of the most promising options for RA treatment. Regardless, cellular uptake of MNPs is one of the most significant criterions for targeting the medication. This paper discusses the numerous interactions of nanoparticles with cells, as well as cellular uptake of NPs. This review provides the mechanistic overview on MNPs involved in RA therapies and regulation anti-arthritis response such as ability to reduce oxidative stress, suppressing the release of proinflammatory cytokines and expression of LPS induced COX-2, and modulation of MAPK and PI3K pathways in Kuppfer cells and hepatic stellate cells. Despite of that MNPs have also ability to regulates enzymes like glutathione peroxidases (GPxs), thioredoxin reductases (TrxRs) and act as an anti-inflammatory agent.

An investigation of methods to enhance adhesion of conductive layer and dielectric substrate for additive manufacturing of electronics.

Additive manufacturing of conductive layers on a dielectric substrate has garnered significant interest due to its promise to produce printed electronics efficiently and its capability to print on curved substrates. A considerable challenge encountered is the conductive layer's potential peeling due to inadequate adhesion with the dielectric substrate, which compromises the durability and functionality of the electronics. This study strives to facilitate the binding force through dielectric substrate surface modification using concentrated sulfuric acid and ultraviolet (UV) laser treatment. First, polyetheretherketone (PEEK) and nanoparticle silver ink were employed as the studied material. Second, the surface treatment of PEEK substrates was conducted across six levels of sulfuric acid exposure time and eight levels of UV laser scanning velocity. Then, responses such as surface morphology, roughness, elemental composition, chemical bonding characteristics, water contact angle, and surface free energy (SFE) were assessed to understand the effects of these treatments. Finally, the nanoparticle silver ink layer was deposited on the PEEK surface, and the adhesion force measured using a pull-off adhesion tester. Results unveiled a binding force of 0.37 MPa on unmodified surface, which escalated to 1.99 MPa with sulfuric acid treatment and 2.21 MPa with UV laser treatment. Additionally, cross-approach treatment investigations revealed that application sequence significantly impacts results, increasing binding force to 2.77 MPa. The analysis further delves into the influence mechanism of the surface modification on the binding force, elucidating that UV laser and sulfuric acid surface treatment methods hold substantial promise for enhancing the binding force between heterogeneous materials in the additive manufacturing of electronics.

Physiologically based pharmacokinetic model for predicting the biodistribution of albumin nanoparticles after induction and recovery from acute lung injury.

The application of nanomedicine in the treatment of acute lung injury (ALI) has great potential for the development of new therapeutic strategies. To gain insight into the kinetics of nanocarrier distribution upon time-dependent changes in tissue permeability after ALI induction in mice, we developed a physiologically based pharmacokinetic model for albumin nanoparticles (ANP). The model was calibrated using data from mice treated with intraperitoneal LPS (6 mg/kg), followed by intravenous ANP (0.5 mg/mouse or about 20.8 mg/kg) at 0.5, 6, and 24 h. The simulation results reproduced the experimental observations and indicated that the accumulation of ANP in the lungs increased, reaching a peak 6 h after LPS injury, whereas it decreased in the liver, kidney, and spleen. The model predicted that LPS caused an immediate (within the first 30 min) dramatic increase in lung and kidney tissue permeability, whereas splenic tissue permeability gradually increased over 24 h after LPS injection. This information can be used to design new therapies targeting specific organs affected by bacterial infections and potentially by other inflammatory insults.

The Remarkable Anti-Breast Cancer Efficacy and Anti-Metastasis by Multifunctional Nanoparticles Co-Loading Squamocin, R848 and IR 780.

Background: Breast cancer is a heterogeneous disease globally accounting for approximately 1 million new cases annually. Chemotherapy remains the main therapeutic option, but the antitumor efficacy needs to be improved. Methods: Two multifunctional nanoparticles were developed in this paper using oleic acid and mPEG2k-PCL2k as the drug carriers. Squamocin (Squ) was employed as a chemotherapeutic agent. Resiquimod (R848) or ginsenoside Rh2 was co-encapsulated in the nanoparticles to remold the immunosuppressive tumor microenvironment, and IR780 was coloaded as a photosensitizer to realize photothermal therapy. Results: The obtained Squ-R848-IR780 nanoparticles and Squ-Rh2-IR780 nanoparticles were uniformly spherical and approximately (162.200 ± 2.800) nm and (157.300 ± 1.1590) nm, respectively, in average diameter, with good encapsulation efficiency (above 85% for each drug), excellent stability in various physiological media and high photothermal conversion efficiency (24.10% and 22.58%, respectively). After intravenous administration, both nanoparticles quickly accumulated in the tumor and effectively enhanced the local temperature of the tumor to over 45 °C when irradiated by an 808 nm laser. At a low dose of 0.1 mg/kg, Squ nanoparticles treatment alone displayed a tumor inhibition rate of 55.28%, pulmonary metastasis inhibition rate of 59.47% and a mean survival time of 38 days, which were all higher than those of PTX injection (8 mg/kg) (43.64%, 25 days and 37.25%), indicating that Squ was a potent and effective antitumor agent. Both multifunctional nanoparticles, Squ-Rh2-IR780 nanoparticles and Squ-R848-IR780 nanoparticles, demonstrated even better therapeutic efficacy, with tumor inhibition rates of 90.02% and 97.28%, pulmonary metastasis inhibition rates of 95.42% and 98.09, and mean survival times of 46 days and 52 days, respectively. Conclusion: The multifunctional nanoparticles coloaded with squamocin, R848 and IR 780 achieved extraordinary therapeutic efficacy and excellent antimetastasis activity and are thus promising in the future treatment of breast tumors and probably other tumors.

Thermal Stability of High-Entropy Alloy Nanoparticles Evaluated by In Situ TEM Observations.

High-entropy alloy (HEA) nanoparticles (NPs) have attracted attention in several fields because of their fascinating properties. The high mechanical strength, good thermal stability, and superior corrosion resistance of HEAs, which are derived from their high configurational entropy, are attractive features. Herein, we investigated the thermal stability of FeCoNiCuPd HEA NPs on reduced graphene oxide via in situ transmission electron microscopy observations at elevated temperatures. The HEA NPs maintained their structure, size, and composition at 700 °C, and their size gradually decreased accompanied by the preferential sublimation of Cu. On the contrary, the deterioration of the monometallic Pd NPs begins at temperatures greater than 700 °C according to Ostwald ripening, which involves the migration of adatoms or mobile molecular species. Theoretical calculations revealed that the detachment of adatoms from clusters (i.e., the first step of Ostwald ripening) was suppressed in the case of HEA NPs because of the high-configuration-entropy effect.

Bio-inspired synthesis of silver nanoparticles usingsalsola imbricataand its application as antibacterial additive in glass ionomer cement.

Nanotechnology has gained immense popularity and observed rapid development due to the remarkable physio-chemical properties of nanoparticles (NPs) and related nanomaterials. The green production of nanoparticles has many benefits over traditional techniques because the current procedures are expensive, time-consuming, and involve harmful substances that limit their applicability. This study aimed to use a novel green source, the Salsola imbricata (SI) plant, which is commonly found in Central Asia and known for its medicinal properties as a reducing and stabilizing agent for the synthesis of AgNPs. The current study also utilized efficient statistical design, the Plackett-Burman Design of Experiment (DOE) method to synthesize the nanoparticles. The characterization of nanoparticles was carried out using UV-Vis spectroscopy, Fourier Transform Infrared Spectroscopy, and scanning electron microscopy (SEM). The Plackett-Burman design results showed that only two out of four factors i.e., AgNO3 concentration and incubation time, were significant for the synthesis of AgNPs. While remaining factors, incubation temperature and plant extract: AgNO3 ratio were non-significant. The SEM analysis result showed that SI-AgNPs had a size of 20-50nm. The SI-AgNPs demonstrated strong antimicrobial activity against oral pathogens such as Streptococcus mutans and Lactobacillus acidophilus, with the highest efficacy observed at a concentration of 2 mg/ml. The addition of SI-AgNPs in glass ionomer cement significantly increased the antimicrobial efficacy of GIC at different concentration (p≤0.000 for 0.2% and 0.1%, p≤0.01 for 0.05% and p≤0.05 for 0.025% respectively). Based on the results of the current study, the plant based AgNPs can be further evaluated in detail as alternate antimicrobial agent either alone or in combination with other antimicrobial agents for different dental applications.

Challenges in the analysis of pharmaceutical lentiviral vector products by orthogonal and complementary physical (nano)particle characterization techniques.

Lentiviral vectors (LVVs) are used as a starting material to generate chimeric antigen receptor (CAR) T cells. Therefore, LVVs need to be carefully analyzed to ensure safety, quality, and potency of the final product. We evaluated orthogonal and complementary analytical techniques for their suitability to characterize particulate matter (impurities and LVVs) in pharmaceutical LVV materials at development stage derived from suspension and adherent manufacturing processes. Microfluidic resistive pulse sensing (MRPS) with additional manual data fitting enabled the assessment of mode diameters for particles in the expected LVV size range in material from adherent production. LVV material from a suspension process, however, contained substantial amounts of particulate impurities which blocked MRPS cartridges. Sedimentation-velocity analytical ultracentrifugation (SV-AUC) resolved the LVV peak in material from adherent production well, whereas in more polydisperse samples from suspension production, presence of particulate impurities masked a potential signal assignable to LVVs. In interferometric light microscopy (ILM) and nanoparticle tracking analysis (NTA), lower size detection limits close to ∼ 70 nm resulted in an apparent peak in particle size distributions at the expected size for LVVs emphasizing the need to interpret these data with care. Interpretation of data from dynamic light scattering (DLS) was limited by insufficient size resolution and sample polydispersity. In conclusion, the analysis of LVV products manufactured at pharmaceutical scale with current state-of-the-art physical (nano)particle characterization techniques was challenging due to the presence of particulate impurities of heterogeneous size. Among the evaluated techniques, MRPS and SV-AUC were most promising yielding acceptable results at least for material from adherent production.