RESUMEN
Reversible protonic ceramic electrochemical cells (R-PCECs) offer the potential for high-efficiency power generation and green hydrogen production at intermediate temperatures. However, the commercial viability of R-PCECs is hampered by the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) within conventional air electrodes operating at reduced temperatures. To address this challenge, this work introduces a novel approach based on the simultaneous optimization of bulk-phase metal-oxygen bonds and in-situ formation of a metal oxide nano-catalyst surface modification. This strategy is designed to expedite the ORR/OER electrocatalytic activity of air electrodes exhibiting triple (O2-, H+, e-) conductivity. Specifically, this engineered air electrode nanocomposite-Ba(Co0.4Fe0.4Zr0.1Y0.1)0.95Ni0.05F0.1O2.9-δ demonstrates remarkable ORR/OER catalytic activity and exceptional durability in R-PCECs. This is evidenced by significantly improved peak power density from 626 to 996 mW cm-2 and highly stable reversibility over a 100-h cycling period. This research offers a rational design strategy to achieve high-performance R-PCEC air electrodes with superior operational activity and stability for efficient and sustainable energy conversion and storage.
RESUMEN
This study focuses on the synthesis of mixed metal oxide anodes (MMOs) with the composition Ti/RuO2Sb2O4Ptx (where x = 0, 5, 10 mol) using hybrid microwave irradiation heating. The synthesized electrodes were characterized using scanning electron microscopy, X-ray energy-dispersive analysis, X-ray diffraction, cyclic voltammetry, and electrochemical impedance spectroscopy. These electrodes were then evaluated in both bulk electrolytic and fuel cell tests within a reversible chloralkaline electrochemical cell. The configurations using the electrodes Ti/(RuO2)0.7-(Sb2O4)0.3 and Ti/(RuO2)66.5-(Sb2O4)28.5-Pt5 presented lower onset potential for oxygen and chlorine evolution reactions and reduced resistance to charge transfer compared to the Ti/(RuO2)63-(Sb2O4)27-Pt10 variant. These electrodes demonstrated notable performance in reversible electrochemical cells, achieving Coulombic efficiencies of up to 60% when operating in the electrolytic mode at current densities of 150 mA cm-2. They also reached maximum power densities of 1.2 mW cm-2 in the fuel cell. In both scenarios, the presence of platinum in the MMO coating positively influenced the process. Furthermore, a significant challenge encountered was crossover through the membranes, primarily associated with gaseous Cl2. This study advances our understanding of reversible electrochemical cells and presents possibilities for further exploration and refinement. It demonstrated that the synergy of innovative electrode synthesis strategies and electrochemical engineering can lead to promising and sustainable technologies for energy conversion.
RESUMEN
A three-terminal memristor with an ultrasmall footprint of only 0.07 µm2 and critical dimensions of 70 nm × 10 nm × 6 nm is introduced. The device's feature is the presence of a gate contact, which enables two operation modes: either tuning the set voltage or directly inducing a resistance change. In I-V mode, we demonstrate that by changing the gate voltages between ±1 V one can shift the set voltage by 69%. In pulsing mode, we show that resistance change can be triggered by a gate pulse. Furthermore, we tested the device endurance under a 1 kHz operation. In an experiment with 2.6 million voltage pulses, we found two distinct resistance states. The device response to a pseudorandom bit sequence displays an open eye diagram and a success ratio of 97%. Our results suggest that this device concept is a promising candidate for a variety of applications ranging from Internet-of-Things to neuromorphic computing.
RESUMEN
Electrochemically in-situ generation of oxygen and caustic soda is promising for sulfide management while suffers from scaling, poor inactivating capacity, hydrogen release and ammonia escape. In this study, the four-compartment electrochemical cell efficiently captured oxygen molecules from the air chamber to produce HO2- without generating toxic by-products. Meanwhile, the catalyst layer surface of PTFE/CB-GDE maintained a relatively balanced gas-liquid micro-environment, enabling the formation of enduring solid-liquid-gas interfaces for efficient HO2- electrosynthesis. A dramatic increase in HO2- generation rate from 453.3 mg L-1 h-1 to 575.4 mg L-1 h-1 was attained by advancement in operation parameters design (flow channels, electrolyte types, flow rates and circulation types). Stability testing resulted in the HO2- generation rate over 15 g L-1 and the current efficiency (CE) exceeding 85%, indicating a robust stable operational capacity. Furthermore, after 120 mg L-1 HO2- treatment, an increase of 11.1% in necrotic and apoptotic cells in the sewer biofilm was observed, higher than that achieved with the addition of NaOH, H2O2 method. The in-situ electrosynthesis strategy for HO2- represents a significance toward the practical implementation of sulfide abatement in sewers, holding the potential to treat various sulfide-containing wastewater.
RESUMEN
An X-ray absorption spectroscopy (XAS) electrochemical cell was used to collect high-quality XAS measurements of N-truncated Cu:amyloid-ß (Cu:Aß) samples under near-physiological conditions. N-truncated Cu:Aß peptide complexes contribute to oxidative stress and neurotoxicity in Alzheimer's patients' brains. However, the redox properties of copper in different Aß peptide sequences are inconsistent. Therefore, the geometry of binding sites for the copper binding in Aß4-8/12/16 was determined using novel advanced extended X-ray absorption fine structure (EXAFS) analysis. This enables these peptides to perform redox cycles in a manner that might produce toxicity in human brains. Fluorescence XAS measurements were corrected for systematic errors including defective-pixel data, monochromator glitches and dispersion of pixel spectra. Experimental uncertainties at each data point were measured explicitly from the point-wise variance of corrected pixel measurements. The copper-binding environments of Aß4-8/12/16 were precisely determined by fitting XAS measurements with propagated experimental uncertainties, advanced analysis and hypothesis testing, providing a mechanism to pursue many similarly complex questions in bioscience. The low-temperature XAS measurements here determine that CuII is bound to the first amino acids in the high-affinity amino-terminal copper and nickel (ATCUN) binding motif with an oxygen in a tetragonal pyramid geometry in the Aß4-8/12/16 peptides. Room-temperature XAS electrochemical-cell measurements observe metal reduction in the Aß4-16 peptide. Robust investigations of XAS provide structural details of CuII binding with a very different bis-His motif and a water oxygen in a quasi-tetrahedral geometry. Oxidized XAS measurements of Aß4-12/16 imply that both CuII and CuIII are accommodated in an ATCUN-like binding site. Hypotheses for these CuI, CuII and CuIII geometries were proven and disproven using the novel data and statistical analysis including F tests. Structural parameters were determined with an accuracy some tenfold better than literature claims of past work. A new protocol was also developed using EXAFS data analysis for monitoring radiation damage. This gives a template for advanced analysis of complex biosystems.
Asunto(s)
Péptidos beta-Amiloides , Cobre , Espectroscopía de Absorción de Rayos X , Péptidos beta-Amiloides/metabolismo , Péptidos beta-Amiloides/química , Cobre/química , Cobre/metabolismo , Espectroscopía de Absorción de Rayos X/métodos , Humanos , Nanoestructuras/química , Sitios de Unión , Oxidación-ReducciónRESUMEN
X-ray spectroscopy is a valuable technique for the study of many materials systems. Characterizing reactions in situ and operando can reveal complex reaction kinetics, which is crucial to understanding active site composition and reaction mechanisms. In this project, the design, fabrication and testing of an open-source and easy-to-fabricate electrochemical cell for in situ electrochemistry compatible with X-ray absorption spectroscopy in both transmission and fluorescence modes are accomplished via windows with large opening angles on both the upstream and downstream sides of the cell. Using a hobbyist computer numerical control machine and free 3D CAD software, anyone can make a reliable electrochemical cell using this design. Onion-like carbon nanoparticles, with a 1:3 iron-to-cobalt ratio, were drop-coated onto carbon paper for testing in situ X-ray absorption spectroscopy. Cyclic voltammetry of the carbon paper showed the expected behavior, with no increased ohmic drop, even in sandwiched cells. Chronoamperometry was used to apply 0.4â V versus reversible hydrogen electrode, with and without 15â min of oxygen purging to ensure that the electrochemical cell does not provide any artefacts due to gas purging. The XANES and EXAFS spectra showed no differences with and without oxygen, as expected at 0.4â V, without any artefacts due to gas purging. The development of this open-source electrochemical cell design allows for improved collection of in situ X-ray absorption spectroscopy data and enables researchers to perform both transmission and fluorescence simultaneously. It additionally addresses key practical considerations including gas purging, reduced ionic resistance and leak prevention.
RESUMEN
The pursuit of high-performance and long-lasting protonic ceramic electrochemical cells (PCECs) is impeded by the lack of efficient and enduring proton conductors. Conventional research approaches, predominantly based on a trial-and-error methodology, have proven to be demanding of resources and time-consuming. Here, this work reports the findings in harnessing high-throughput computational methods to expedite the discovery of optimal electrolytes for PCECs. This work methodically computes the oxygen vacancy formation energy (EV), hydration energy (EH), and the adsorption energies of H2O and CO2 for a set of 932 oxide candidates. Notably, these findings highlight BaSnxCe0.8-xYb0.2O3-δ (BSCYb) as a prospective game-changing contender, displaying superior proton conductivity and chemical resilience when compared to the well-regarded BaZrxCe0.8-xY0.1Yb0.1O3-δ (BZCYYb) series. Experimental validations substantiate the computational predictions; PCECs incorporating BSCYb as the electrolyte achieved extraordinary peak power densities in the fuel cell mode (0.52 and 1.57 W cm-2 at 450 and 600 °C, respectively), a current density of 2.62 A cm-2 at 1.3 V and 600 °C in the electrolysis mode while demonstrating exceptional durability for over 1000-h when exposed to 50% H2O. This research underscores the transformative potential of high-throughput computational techniques in advancing the field of proton-conducting oxides for sustainable power generation and hydrogen production.
RESUMEN
In this work, we report on an improved cell assembly of cylindrical electrochemical cells for 23 Na in-situ solid-state NMR (ssNMR) investigations. The cell set-up is suitable for using powder electrode materials. Reproducibility of our cell assembly is analyzed by preparing two cells containing hard carbon (HC) powder as working electrode and sodium metal as reference electrode. Electrochemical storage properties of HC powder electrode derived from carbonization of sustainable cellulose are studied by ssNMR. 23 Na in-situ ssNMR monitors the sodiation/desodiation of a Na|NaPF6 |HC cell (cell 1) over a period of 22â days, showing high cell stability. After the galvanostatic process, the HC powder material is investigated by high resolution 23 Na ex-situ MAS NMR. The formation of ionic sodium species in different chemical environments is obtained. Subsequently, a second Na|NaPF6 |HC cell (cell 2) is sodiated for 11â days achieving a capacity of 220â mAh/g. 23 Na ex-situ MAS NMR measurements of the HC powder material extracted from this cell clearly indicate the presence of quasi-metallic sodium species next to ionic sodium species. This observation of quasi-metallic sodium species is discussed in terms of the achieved capacity of the cell as well as of side reactions of sodium in this electrode material.
RESUMEN
Light-emitting electrochemical cells (LECs) are kind of easily fabricated and low-cost light-emitting devices that can efficiently convert electric power to light energy. Compared with blue and green LECs, the performance of deep-red LECs is limited by the high non-radiative rate of emitters in long-wavelength region. While various organic emitters with deep-red emission have been developed to construct high-performance LECs, including polymers, metal complexes, and organic luminous molecules (OLMs), but this is seldom summarized. Therefore, we overview the recent advances of organic emitters with emission at the deep-red region for LECs, and specifically highlight the molecular design approach and electrochemiluminescence performance. We hope that this review can act as a reference for further research in designing high-performance deep-red LECs.
RESUMEN
Currently, efficient utilization of low-grade thermal energy is a great challenge. Thermoelectricity is an extremely promising method of generating electrical energy from temperature differences. As a green energy conversion technology, thermo-electrochemical cells (TECs) have attracted much attention in recent years for their ability to convert thermal energy directly into electricity with high thermal power. Within TECs, anions and cations gain and lose electrons, respectively, at the electrodes, using the potential difference between the hot and cold terminals of the electrodes by redox couples. Additionally, the anions and cations therein are constantly circulating and mobile via concentration diffusion and thermal diffusion, providing an uninterrupted supply of power to the exterior. This review article focuses mainly on the operation of TECs and recent advances in redox couples, electrolytes, and electrodes. The outlook for optimization strategies regarding TECs is also outlined in this paper.
RESUMEN
In a light-emitting electrochemical cell (LEC), electrochemical doping caused by mobile ions facilitates bipolar charge injection and recombination emissions for a high electroluminescence (EL) intensity at low driving voltages. We present the development of a nanogap LEC (i.e., nano-LEC) comprising a light-emitting polymer (F8BT) and an ionic liquid deposited on a gold nanogap electrode. The device demonstrated a high EL intensity at a wavelength of 540 nm corresponding to the emission peak of F8BT and a threshold voltage of â¼2 V at 300 K. Upon application of a constant voltage, the device demonstrated a gradual increase in current intensity followed by light emission. Notably, the delayed components of the current and EL were strongly suppressed at low temperatures (<285 K). The results clearly indicate that the device functions as an LEC and that the nano-LEC is a promising approach to realizing molecular-scale current-induced light sources.
RESUMEN
The main obstacle of ionic thermo-electrochemical cells (TECs) in continuous power supply lies in a low heat-to-electricity energy conversion efficiency because most TECs work in thermodiffusion mode in which the ions are confined in a liquid/electrolyte media. The introduction of the redox couple onto the electrode surface may overcome the obstacle by resolving the low mass transport rate of ions caused by the redox process occurring near but not on the electrode surface. Herein, the authors demonstrate enhancement of TECs by integrating the redox couple directly onto the electrode surface to maximize the mass transport efficiency. A discontinuous interfacial modification strategy is developed by using a carbon cloth/iron (II/III) phytate as the symmetric electrodes. The gelled electrolyte consisting of a polyacrylamide matrix and phytic acid is shown to promote selective ion diffusion. A synergistic combination consisting of the thermodiffusion effect and redox reactions on the electrode is established in a pre-treated layout. Such TEC affords a high output voltage of 0.4 V, an excellent instantaneous output power density (20.26 mW m-2 K-2 ) and a record-high 2 h output energy density (2451 J m-2 ) under TH = 30 °C with TC = 15 °C, with an ultrahigh Carnot-relative efficiency of 1.12%.
RESUMEN
The development of efficient and stable oxygen-reducing electrodes is challenging but vital for the production of efficient electrochemical cells. Composite electrodes composed of mixed ionic-electronic conducting La1-xSrxCo1-yFeyO3-δ and ionic conducting doped CeO2 are considered promising components for solid oxide fuel cells. However, no consensus has been reached regarding the reasons of the good electrode performance, and inconsistent performance has been reported among various research groups. To mitigate the difficulties related to analyzing composite electrodes, this study applied three-terminal cathodic polarization to dense and nanoscale La0.6Sr0.4CoO3-δ-Ce0.8Sm0.2O1.9 (LSC-SDC) model electrodes. The critical factors determining the performance of the composite electrodes are the segregation of catalytic cobalt oxides to the electrolyte interfaces and the oxide-ion conducting paths provided by SDC. The addition of Co3O4 to the LSC-SDC electrode resulted in reduced LSC decomposition; thus, the interfacial and electrode resistances were low and stable. In the Co3O4-added LSC-SDC electrode under cathodic polarization, Co3O4 turned wurtzite-type CoO, which suggested that the Co3O4 addition suppressed the decomposition of LSC and, thus, the cathodic bias was maintained from the electrode surface to electrode-electrolyte interface. This study shows that cobalt oxide segregation behavior must be considered when discussing the performance of composite electrodes. Furthermore, by controlling the segregation process, microstructure, and phase evolution, stable low-resistance composite oxygen-reducing electrodes can be fabricated.
RESUMEN
Two binuclear heteroleptic CuI complexes, namely Cu-NIR1 and Cu-NIR2, bearing rigid chelating diphosphines and π-conjugated 2,5-di(pyridin-2-yl)thiazolo[5,4-d]thiazole as the bis-bidentate ligand are presented. The proposed dinuclearization strategy yields a large bathochromic shift of the emission when compared to the mononuclear counterparts (M1-M2) and enables shifting luminescence into the near-infrared (NIR) region in both solution and solid state, showing emission maximum at ca. 750 and 712â nm, respectively. The radiative process is assigned to an excited state with triplet metal-to-ligand charge transfer (3 MLCT) character as demonstrated by in-depth photophysical and computational investigation. Noteworthy, X-ray analysis of the binuclear complexes unravels two interligand π-π-stacking interactions yielding a doubly locked structure that disfavours flattening of the tetrahedral coordination around the CuI centre in the excited state and maintain enhanced NIR luminescence. No such interaction is present in M1-M2. These findings prompt the successful use of Cu-NIR1 and Cu-NIR2 in NIR light-emitting electrochemical cells (LECs), which display electroluminescence maximum up to 756â nm and peak external quantum efficiency (EQE) of 0.43 %. Their suitability for the fabrication of white-emitting LECs is also demonstrated. To the best of our knowledge, these are the first examples of NIR electroluminescent devices based on earth-abundant CuI emitters.
RESUMEN
An isotropic thermo-electrochemical cell is introduced with a high Seebeck coefficient (S e) of 3.3 mV K-1 that uses a ferricyanide/ferrocyanide/guanidinium-based agar-gelated electrolyte. A power density of about 20 µW cm-2 is achieved at a temperature difference of about 10 K, regardless of whether the heat source is on the top or bottom section of the cell. This behavior is very different from that of cells with liquid electrolytes, which exhibit high anisotropy, and for which high S e values are achieved only by heating the bottom electrode. The guanidinium-containing gelatinized cell does not exhibit steady-state operation, but its performance recovers when disconnected from the external load, suggesting that the observed power drop under load conditions is not due to device degeneration. The large S e value and isotropic properties can mean that the novel system represents a major advancement from the standpoint of harvesting of low-temperature heat, such as body heat and solar thermal heat.
RESUMEN
A thermocell generates thermopower from a temperature difference (ΔT) between two electrodes. The converse process of thermocells is an electrochemical Peltier effect, which creates a ΔT on the electrodes by applying an external current. The Seebeck coefficient (Se ) of the electrochemical system is proportional to the entropy change of the redox reaction; therefore, a redox system having a significant entropy change is expected to increase the Se . In this study, a thermoresponsive polymer having a redox-active moiety, poly(N-isopropyl acrylamide-co-N-(2-acrylamide ethyl)-N'-n-propylviologen) (PNV), is used as the redox species of a thermocell. PNV2+ dication undergoes the coil-globule phase transition upon the reduction to PNV+ cation radical, and a large entropy change is introduced because water molecules are freed from the polymer chains. The Se of PNV thermocell drastically increased to +2.1 mV K-1 at the lower critical solution temperature (LCST) of PNV. The entropy change calculated from the increment of Se agrees with the value evaluated by differential scanning calorimetry. Moreover, the electrochemical Peltier effect is observed when the device temperature is increased above the LCST. This study shows that the large entropy change associated with the coil-globule phase transition can be used in electrochemical thermal management and refrigeration technologies.
RESUMEN
This study introduces a new generation of dielectrophoretic-based microfluidic device for the precise separation of multiple particle/cell types. The device features two sets of 3D electrodes, namely cylindrical and sidewall electrodes. The main channel of the device terminates with three outlets: one in the middle for particles that sense negative dielectrophoresis force and two others at the right and left sides for particles that sense positive dielectrophoresis force. To evaluate the device performance, we used red blood cells (RBCs), T-cells, U937-MC cells, and Clostridium difficile bacteria as our test subjects. Our results demonstrate that the proposed microfluidic device could accurately separate bioparticles in two steps, with sidewall electrodes of 200 µm proving optimal for efficient separation. Applying different voltages for each separation step, we found that the device performed most effectively at 6 Vp-p applied to the 3D electrodes, and at 20 Vp-p and 11 Vp-p applied to the sidewall electrodes for separating RBCs from bacteria and T-cells from U937-MC cells, respectively. Notably, the device's maximum electric fields remained below the cell electroporation threshold, and we achieved a separation efficiency of 95.5% for multi-type particle separation. Our findings proved the device's capacity for separating multiple particle types with high accuracy, without limitation for particle variety.
Asunto(s)
Técnicas Analíticas Microfluídicas , Humanos , Electroforesis/métodos , Electrodos , Separación Celular , Dispositivos Laboratorio en un ChipRESUMEN
The development of circularly polarized electroluminescence (CPEL) is currently hampered by the high difficulty and cost in the syntheses of suitable chiral materials and the notorious chirality diminishment issue in electrical devices. Herein, diastereomeric IrIII and RuII complexes with chiral (±)-camphorsulfonate counteranions are readily synthesized and used as the active materials in circularly polarized light-emitting electrochemical cells to generate promising CPELs. The addition of the chiral ionic liquid (±)-1-butyl-3-methylimidazole camphorsulfonate into the active layer significantly improves the device performance and the electroluminescence dissymmetry factors (≈10-3 ), in stark contrast to the very weak circularly polarized photoluminescence of the spin-coated films of these diastereomeric complexes. Control experiments with enantiopure IrIII complexes suggest that the chiral anions play a dominant role in the electrically-induced amplification of CPELs.
RESUMEN
Reversible protonic ceramic electrochemical cells (R-PCECs) are emerging as ideal devices for highly efficient energy conversion (generating electricity) and storage (producing H2 ) at intermediate temperatures (400-700 °C). However, their commercialization is largely hindered by the development of highly efficient air electrodes for oxygen reduction and water-splitting reactions. Here, the findings in the design of a highly active and durable air electrode are reported: high-entropy Pr0.2 Ba0.2 Sr0.2 La0.2 Ca0.2 CoO3- δ (HE-PBSLCC), which exhibits impressive activity and stability for oxygen reduction and water-splitting reactions, as confirmed by electrochemical characterizations and structural analysis. When used as an air electrode of R-PCEC, the HE-PBSLCC achieves encouraging performances in dual modes of fuel cells (FCs) and electrolysis cells (ECs) at 650 °C, demonstrating a maximum power density of 1.51 W cm-2 in FC mode, and a current density of -2.68 A cm-2 at 1.3 V in EC mode. Furthermore, the cells display good operational durabilities in FC and EC modes for over 270 and 500 h, respectively, and promising cycling durability for 70 h with reasonable Faradaic efficiencies. This study offers an effective strategy for the design of active and durable air electrodes for efficient oxygen reduction and water splitting.
RESUMEN
Solid oxide electrochemical cells (SOCs) hold potential as a critical component in the future landscape of renewable energy storage and conversion systems. However, the commercialization of SOCs still requires further breakthroughs in new material development and engineering designs to achieve high performance and durability. In this study, a data-driven powder-to-power framework has been presented, fully digitizing the morphology evolution of heterogeneous electrodes from fabrication to long-term operation. This framework enables accurate performance prediction over the full life cycle. The intrinsic correlation between microstructural parameters and electrode durability is elucidated through parameter analysis. Rational control of the ion-conducting phase volume fraction can effectively suppress Ni coarsening and mitigate the excessive ohmic loss caused by Ni migration. The initial and degraded electrode performances are attributed to the interplay of multiple parameters. A practical optimization strategy to enhance the initial performance and durability of the electrode is proposed through the construction of the surrogate model and the application of the optimization algorithm. The optimal electrode parameters are determined to accommodate various maximum operation time requirements. By implementing the data-driven powder-to-power framework, it is possible to reduce the degradation rate of Ni-based electrodes from 2.132% to 0.703% kh-1 with a required maximum operation time of over 50,000 h.