Organic Thiolate as Multifunctional Salt for Rechargeable Lithium-Sulfur Batteries.

The practical application of lithium-sulfur (Li-S) batteries is hindered by the severe shuttle effect of soluble polysulfide intermediates and the unstable lithium anode interface. Conventional lithium salts (e.g., LiPF6, LiTFSI) just serve as conducting salts to provide necessary free lithium cations for internal ion transport, lacking full utilization of the anions. Herein, lithium 4-fluorobenzenethiolate (F-PhSLi) as a multifunctional salt for rechargeable Li-S batteries, which is able to chemically react with sulfur to alter the redox pathway of sulfur cathode, accelerate the sulfur redox kinetics, and inhibit the shuttle effect of polysulfides is reported. Meanwhile, due to the redox activity of F-PhSLi, the reactive electrolyte can offer additional capacity. In addition, it also can construct a stable LiF-rich solid electrolyte interface layer on the lithium metal anode. Such reactive electrolyte endows Li-S batteries with ultrahigh discharge specific capacity, improved sulfur utilization, long-term storage ability, enhanced rate capability, and outstanding low-temperature performance. This work presents a new solution for developing high performance Li-S batteries.

Hypervalent iodine-catalyzed amide and alkene coupling enabled by lithium salt activation.

Hypervalent iodine catalysis has been widely utilized in olefin functionalization reactions. Intermolecularly, the regioselective addition of two distinct nucleophiles across the olefin is a challenging process in hypervalent iodine catalysis. We introduce here a unique strategy using simple lithium salts for hypervalent iodine catalyst activation. The activated hypervalent iodine catalyst allows the intermolecular coupling of soft nucleophiles such as amides onto electronically activated olefins with high regioselectivity.

Unlocking the Use of LiCl as an Inexpensive Salt for Lithium-Ion Batteries with a Novel Anion Receptor.

Lithium chloride (LiCl) is an inexpensive and environmentally friendly salt abundant in the ocean. However, the insolubility of LiCl in conventional electrolyte solvents prevents the practical use of LiCl for lithium-ion batteries. Here, we report a novel method to increase the solubility of LiCl in a conventional electrolyte. The solubility of LiCl in ethylene carbonate (EC)/dimethyl carbonate (DMC) (1/1, v/v) is about quadrupled by adding a small amount of anion receptor with two urea moieties as recognition sites connecting with an ether chain. Anion receptor is an organic molecule that can associate with anions. Our anion receptor is able to associate with chloride anion. The ionic conductivity of LiCl in EC/DMC increased from 0.023 mS cm-1 (without an anion receptor) to 0.075 mS cm-1 (with a 0.05 M anion receptor). The electrolyte in the presence of a 0.05 M receptor exhibits higher ionic conductivity, rate capability, and cyclability than the electrolyte without the receptor.

Restraint of Nonradiative Recombination via Modulation of n-Phase Distribution through Interfacial Lithium Salt Insertion for High-Performance Pure-Blue Perovskite LEDs.

Quasi-two-dimensional perovskite has been widely used in blue perovskite light-emitting diodes. However, the performance of these devices is still hampered by random phase distribution, nonradiative recombination, and imbalanced carrier transport. In this work, an effective strategy is proposed to mitigate these limitations by inserting lithium salts at the interfaces between the hole transport layer (HTL) and the perovskite layer. The perovskite film on the inserted Li2CO3 layer exhibits reasonable n-value redistribution, which leads to the repressive nonradiation recombination and enhanced carrier transport. Moreover, the inserted Li2CO3 layer also improves the electrical conductivity of PEDOT:PSS and hinders indium ion diffusion from the PEDOT:PSS layer to the perovskite film, which inhibits exciton quenching and nonradiative recombination loss at the HTL/perovskite interface. Taking advantage of these merits, we have successfully fabricated efficient pure-blue PeLEDs with an external quantum efficiency of 6.2% at 472 nm and a luminance of 726 cd cm-2. The restraint of nonradiative recombination at the interface offers a promising approach for efficient pure-blue PeLEDs.

Understanding the Role of Imide-Based Salts and Borate-Based Additives for Safe and High-Performance Glyoxal-Based Electrolytes in Ni-Rich NMC811 Cathodes for Li-Ion Batteries.

Herein, the design of novel and safe electrolyte formulations for high-voltage Ni-rich cathodes is reported. The solvent mixture comprising 1,1,2,2-tetraethoxyethane and propylene carbonate not only displays good transport properties, but also greatly enhances the overall safety of the cell thanks to its low flammability. The influence of the conducting salts, that is, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium bis(fluorosulfonyl)imide (LiFSI), and of the additives lithium bis(oxalato)borate (LiBOB) and lithium difluoro(oxalato)borate (LiDFOB) is examined. Molecular dynamics simulations are carried out to gain insights into the local structure of the different electrolytes and the lithium-ion coordination. Furthermore, special emphasis is placed on the film-forming abilities of the salts to suppress the anodic dissolution of the aluminum  current collector and to create a stable cathode electrolyte interphase (CEI). In this regard, the borate-based additives significantly alleviate the intrinsic challenges associated with the use of LiTFSI and LiFSI salts. It is worth remarking that a superior cathode performance is achieved by using the LiFSI/LiDFOB electrolyte, displaying a high specific capacity of 164 mAh g-1 at 6 C and ca. 95% capacity retention after 100 cycles at 1 C. This is attributed to the rich chemistry of the generated CEI layer, as confirmed by ex situ X-ray photoelectron spectroscopy.

Anion-Involved Solvation Structure of Lithium Polysulfides in Lithium-Sulfur Batteries.

Lithium polysulfides (LiPSs) are pivotal intermediates involved in all the cathodic reactions in lithium-sulfur (Li-S) batteries. Elucidating the solvation structure of LiPSs is the first step for rational design of electrolyte and improving Li-S battery performances. Herein, we investigate the solvation structure of LiPSs and find that Li salt anions tend to enter the first solvation sheath of LiPSs and form contact ion pairs in electrolyte. The anion-involved solvation structure of LiPSs significantly influences the intrinsic kinetics of the sulfur redox reactions. In particular, the LiPS solvation structure modified by lithium bis(fluorosulfonyl)imide endows Li-S batteries with reduced polarization and enhanced rate performances under high sulfur areal loading and lean electrolyte volume conditions. This work updates the fundamental understanding of the solvation chemistry of LiPSs and highlights electrolyte engineering for promoting the performances of Li-S batteries.

Self-Standing Single-Ion Borate Salt-Based Polymer Electrolyte for Lithium Metal Batteries.

Polymer electrolytes (PEs) with excellent flexibility and superior compatibility toward lithium (Li) metal anodes have been deemed as one of the most promising alternatives to liquid electrolytes. However, conventional lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-based dual-ion PEs suffer from a low Li ion transference number and notorious Li dendrite growth. Here, a single-ion conducting polyborate salt without any fluorinated groups, polymeric lithium dihydroxyterephthalic acid borate (PLDPB), is presented for addressing the issues of Li metal batteries. Owing to a nearly immovable bulky anion and the presence of a rigid benzene structure, the PLDPB@poly(ethylene oxide) (PEO) PE exhibits an ultrahigh Li ion transference number (0.94) and excellent mechanical strength, which could significantly restrict the growth of Li dendrites. Postmortem analysis reveals that a fluorine-free solid electrolyte interphase (SEI) enriched with B-O and benzene-containing species is formed on the surface of the Li metal anode, thereby facilitating elimination of excessive parasitic reactions and simultaneously suppressing the formation of Li dendrites. Consequently, the LiFePO4/Li cells with PLDPB@PEO PEs show an improved long-term cycling performance and high capacity retention (90.0%) and Coulombic efficiency (99.9%) after 500 cycles. This work may inspire new ideas to boost the development of single-ion conducting salts for dendrite-free Li metal batteries.

An intrinsic polymer electrolyte via in situ cross-linked for solid lithium-based batteries with high performance.

Since the introduction of poly(ethylene oxide) (PEO)-based polymer electrolytes more than 50 years, few other real polymer electrolytes with commercial application have emerged. Due to the low ion conductivity at room temperature, the PEO-based electrolytes cannot meet the application requirements. Most of the polymer electrolytes reported in recent years are in fact colloidal/composite electrolytes with plasticizers and fillers, not genuine electrolytes. Herein, we designed and synthesized a cross-linked polymer with a three-dimensional (3D) mesh structure which can dissolve the Li bis(trifluoromethylsulfonyl)imide (LiTFSI) salt better than PEO due to its unique 3D structure and rich oxygen-containing chain segments, thus forming an intrinsic polymer electrolyte (IPE) with ionic conductivity of 0.49 mS cm-1 at room temperature. And it can hinder the migration of large anions (e.g. TFSI-) in the electrolyte and increase the energy barrier to their migration, achieving Li+ migration numbers (tLi+) of up to 0.85. At the same time, IPE has good compatibility with lithium metal cathode and LiFePO4 (LFP) cathode, with stable cycles of more than 2,000 and 700 h in Li//Li symmetric batteries at 0.2 and 0.5 mAh cm-2 current densities, respectively. In addition, the Li/IPE/LFP batteries show the capacity retention >90% after 300 cycles at 0.5 C current density. This polymer electrolyte will be a pragmatic way to achieve commercializing all-solid-state, lithium-based batteries.

Tuning and Balancing the Donor Number of Lithium Salts and Solvents for High-Performance Li Metal Anode.

The low reversibility of Li deposition/stripping in conventional carbonate electrolytes hinders the development of lithium metal batteries. Herein, we proposed a combination of solvents with a moderate donor number (DN) and LiNO3 as the sole salt, which has rarely been attempted due to its low solubility or dissociation degree in common solvents. It is found that the DN value of solvents is highly correlated to the reversibility of Li deposition behavior when LiNO3 is applied as the sole salt. The combination of LiNO3 and solvents with moderate DN behaves like a quasi-concentrated electrolyte even at a common or moderate concentration, while neither the solvents with poor solubility and low dissociation for LiNO3 (which usually corresponds to a low DN) nor the solvents with high dissociation for LiNO3 (which usually corresponds to an overly high DN) can achieve a high reversibility for low conductivity or excessive solvent decomposition. As a result, a Coulombic efficiency as high as 99.6% for Li deposition/stripping is achieved with the optimized combination. We believe this work will give a better understanding of the role of anions and solvents in the regulation of the solvation structure, and DN can be utilized as an important guideline to sieve suitable solvents for LiNO3 as the main salt to exhibit intriguing properties beyond traditional cognition.

Highly Oxidative-Resistant Cyano-Functionalized Lithium Borate Salt for Enhanced Cycling Performance of Practical Lithium-Ion Batteries.

Lithium difluoro(oxalato) borate (LiDFOB) has been widely investigated in lithium-ion batteries (LIBs) owing to its advantageous thermal stability and excellent aluminum passivation property. However, LiDFOB tends to suffer from severe decomposition and generate a lot of gas species (e.g., CO2 ). Herein, a novel cyano-functionalized lithium borate salt, namely lithium difluoro(1,2-dihydroxyethane-1,1,2,2-tetracarbonitrile) borate (LiDFTCB), is innovatively synthesized as a highly oxidative-resistant salt to alleviate above dilemma. It is revealed that the LiDFTCB-based electrolyte enables LiCoO2 /graphite cells with superior capacity retention at both room and elevated temperatures (e.g., 80 % after 600 cycles) with barely any CO2 gas evolution. Systematic studies reveal that LiDFTCB tends to form thin and robust interfacial layers at both electrodes. This work emphasizes the crucial role of cyano-functionalized anions in improving cycle lifespan and safety of practical LIBs.

High Performance Ternary Solid Polymer Electrolytes Based on High Dielectric Poly(vinylidene fluoride) Copolymers for Solid State Lithium-Ion Batteries.

Renewable energy sources require efficient energy storage systems. Lithium-ion batteries stand out among those systems, but safety and cycling stability problems still need to be improved. This can be achieved by the implementation of solid polymer electrolytes (SPE) instead of the typically used separator/electrolyte system. Thus, ternary SPEs have been developed based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene), P(VDF-TrFE-CFE) as host polymers, clinoptilolite (CPT) zeolite added to stabilize the battery cycling performance, and ionic liquids (ILs) (1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN])), 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([PMPyr][TFSI]) or lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), incorporated to increase the ionic conductivity. The samples were processed by doctor blade with solvent evaporation at 160 °C. The nature of the polymer matrix and fillers affect the morphology and mechanical properties of the samples and play an important role in electrochemical parameters such as ionic conductivity value, electrochemical window stability, and lithium-transference number. The best ionic conductivity (4.2 × 10-5 S cm-1) and lithium transference number (0.59) were obtained for the PVDF-HFP-CPT-[PMPyr][TFSI] sample. Charge-discharge battery tests at C/10 showed excellent battery performance with values of 150 mAh g-1 after 50 cycles, regardless of the polymer matrix and IL used. In the rate performance tests, the best SPE was the one based on the P(VDF-TrFE-CFE) host polymer, with a discharge value at C-rate of 98.7 mAh g-1, as it promoted ionic dissociation. This study proves for the first time the suitability of P(VDF-TrFE-CFE) as SPE in lithium-ion batteries, showing the relevance of the proper selection of the polymer matrix, IL type, and lithium salt in the formulation of the ternary SPE, in order to optimize solid-state battery performance. In particular, the enhancement of the ionic conductivity provided by the IL and the effect of the high dielectric constant polymer P(VDF-TrFE-CFE) in improving battery cyclability in a wide range of discharge rates must be highlighted.

Initiator-free in-situ synthesized polymer electrolytes with high ionic conductivity for dendrite-free lithium metal batteries.

In-situ preparation of polymer electrolytes (PEs) can enhance electrolyte/electrode interface contact and accommodate the current large-scale production line of lithium-ion batteries (LIBs). However, reactive initiators of in-situ PEs may lead to low capacity, increased impedance and poor cycling performance. Flammable and volatile monomers and plasticizers of in-situ PEs are potential safety risks for the batteries. Herein, we adopt lithium difluoro(oxalate)borate (LiDFOB)-initiated in-situ polymerization of solid-state non-volatile monomer 1,3,5-trioxane (TXE) to fabricate PEs (In-situ PTXE). Fluoroethylene carbonate (FEC) and methyl 2,2,2-trifluoroethyl carbonate (FEMC) with good fire retardance, high flash point, wide electrochemical window and high dielectric constant were introduced as plasticizers to improve ionic conductivity and flame retardant property of In-situ PTXE. Compared with previously reported in-situ PEs, In-situ PTXE exhibits distinct merits, including free of initiators, non-volatile precursors, high ionic conductivity of 3.76 × 10-3 S cm-1, high lithium-ion transference number of 0.76, wide electrochemical stability window (ESW) of 6.06 V, excellent electrolyte/electrode interface stability and effectively inhibition of Li dendrite growth on the lithium metal anode. The fabricated LiFePO4 (LFP)/Li batteries with In-situ PTXE achieve significantly boosted cycle stability (capacity retention rate of 90.4% after 560 cycles) and outstanding rate capability (discharge capacity of 111.7 mAh g-1 at 3C rate).

Lithium Salt Dissociation Promoted by 18-Crown-6 Ether Additive toward Dilute Electrolytes for High Performance Lithium Oxygen Batteries.

Lithium-oxygen batteries (LOBs) are well known for their high energy density. However, their reversibility and rate performance are challenged due to the sluggish oxygen reduction/evolution reactions (ORR/OER) kinetics, serious side reactions and uncontrollable Li dendrite growth. The electrolyte plays a key role in transport of Li+ and reactive oxygen species in LOBs. Here, we tailored a dilute electrolyte by screening suitable crown ether additives to promote lithium salt dissociation and Li+ solvation through electrostatic interaction. The electrolyte containing 100 mM 18-crown-6 ether (100-18C6) exhibits enhanced electrochemical stability and triggers a solution-mediated Li2 O2 growth pathway in LOBs, showing high discharge capacity of 10 828.8 mAh gcarbon -1 . Moreover, optimized electrode/electrolyte interfaces promote ORR/OER kinetics on cathode and achieve dendrite-free Li anode, which enhances the cycle life. This work casts new lights on the design of low-cost dilute electrolytes for high performance LOBs.

Insights into the Effect of Lithium Doping on the Deep Eutectic Solvent Choline Chloride:Urea.

Choline-based deep eutectic solvents (DESs) are potential candidates to replace flammable organic solvent electrolytes in lithium-ion batteries (LIBs). The effect of the addition of a lithium salt on the structure and dynamics of the material needs to be clarified before it enters the battery. Here, the archetypical DES choline chloride:urea at 1:2 mole fraction has been added with lithium chloride at two different concentrations and the effect of the additional cation has been evaluated with respect to the non-doped system via multinuclear NMR techniques. 1H and 7Li spin-lattice relaxation times and diffusion coefficients have been measured between 298 K and 373 K and revealed a decrease in both rotational and translational mobility of the species after LiCl doping at a given temperature. Temperature dependent 35Cl linewidths reflect the viscosity increase upon LiCl addition, yet keep track of the lithium complexation. Quantitative indicators such as correlation times and activation energies give indirect insights into the intermolecular interactions of the mixtures, while lithium single-jump distance and transference number shed light into the lithium transport, being then of help in the design of future DES electrolytes.

Neuroprotective Effects of the Lithium Salt of a Novel JNK Inhibitor in an Animal Model of Cerebral Ischemia-Reperfusion.

The c-Jun N-terminal kinases (JNKs) regulate many physiological processes, including inflammatory responses, morphogenesis, cell proliferation, differentiation, survival, and cell death. Therefore, JNKs represent attractive targets for therapeutic intervention. In an effort to develop improved JNK inhibitors, we synthesized the lithium salt of 11H-indeno[1,2-b]quinoxaline-11-one oxime (IQ-1L) and evaluated its affinity for JNK and biological activity in vitro and in vivo. According to density functional theory (DFT) modeling, the Li+ ion stabilizes the six-membered ring with the 11H-indeno[1,2-b]quinoxaline-11-one (IQ-1) oximate better than Na+. Molecular docking showed that the Z isomer of the IQ-1 oximate should bind JNK1 and JNK3 better than (E)-IQ-1. Indeed, experimental analysis showed that IQ-1L exhibited higher JNK1-3 binding affinity in comparison with IQ-1S. IQ-1L also was a more effective inhibitor of lipopolysaccharide (LPS)-induced nuclear factor-κB/activating protein 1 (NF-κB/AP-1) transcriptional activity in THP-1Blue monocytes and was a potent inhibitor of proinflammatory cytokine production by MonoMac-6 monocytic cells. In addition, IQ-1L inhibited LPS-induced c-Jun phosphorylation in MonoMac-6 cells, directly confirming JNK inhibition. In a rat model of focal cerebral ischemia (FCI), intraperitoneal injections of 12 mg/kg IQ-1L led to significant neuroprotective effects, decreasing total neurological deficit scores by 28, 29, and 32% at 4, 24, and 48 h after FCI, respectively, and reducing infarct size by 52% at 48 h after FCI. The therapeutic efficacy of 12 mg/kg IQ-1L was comparable to that observed with 25 mg/kg of IQ-1S, indicating that complexation with Li+ improved efficacy of this compound. We conclude that IQ-1L is more effective than IQ-1S in treating cerebral ischemia injury and thus represents a promising anti-inflammatory compound.

Anion Donicity of Liquid Electrolytes for Lithium Carbon Fluoride Batteries.

The increasing demand for high-energy powers have greatly incentivized the development of lithium carbon fluoride (Li||CFx ) cells. Five kinds of non-aqueous liquid electrolytes with various kinds of lithium salts (LiX, X=PF6 - , TFSI- , BF4 - , ClO4 - , and CF3 SO3 - ) were comparatively studied. Intriguingly, the LiBF4 -based electrolyte show relatively moderate ionic conductivities; yet, the corresponding Li||CFx cells deliver the highest discharge capacities among them. A combination of morphological and compositional analyses of the discharge CFx cathode suggest that the moderate donicity of BF4 - anion is accountable for favoring the breakdown of C-F bonds, and subsequently forming crystalline lithium fluoride as the main discharge products. This work brings not only fresh understanding on the role of salt anions for Li||CFx cells, but also inspire the electrolyte design for other conversion-type (sulfur and/or organosulfur) cathode materials desired for high-energy applications.

Face-lifting the surface of LiNi0.8Co0.15Al0.05O2cathode via Y(PO3)3to form anin situtriple composite Li-ion conductor coating layer with the enhanced electrochemical performance.

Due to the assets such as adequate discharge capacity and rational cost, LiNi0.8Co0.15Al0.05O2(NCA), a high-nickel ternary layered oxide, is regarded to be a favorable cathode contender for lithium-ion batteries. However, the superior commercial application is restricted by the surface residual alkaline lithium salt (LiOH or/and Li2CO3) of nickel-rich cathode materials, which will expedite the disintegration of the structure and the engendering of gas (CO2). Therefore, in this paper, we devise and fabricate a Y(PO3)3modified LiNi0.8Co0.15Al0.05O2(NCA), intending to optimize the surface residual alkaline lithium salt (antecedent deportation of H2O and CO2) while forming anin situtriple composite Li-ion conductor coating (Y(PO3)3-Li3PO4-YPO4) to enhance the electrochemical behavior. Under this method, the 2 mol% Y(PO3)3modified NCA electrode reveals exceptional rate capability (5 C/156.3 mAh g-1) and extraordinary cycle stability after 200 cycles (2 C/88.3%), whereas the original sample is only 5 C/123.1 mAh g-1and 2 C/71.2% after 200 cycles. Conspicuously, even under the draconian circumstances of the high temperature and the high rate at 55 °C/1 C, the 2 mol% Y(PO3)3modified NCA electrode sustains a high reversible capacity, with an admirable capacity retention rate of 89.4% after 100 cycles. These contented results signify that the surface remodeling tactic presents a viable scheme for ameliorating high-nickel materials' performance and appropriateness.

Modified Poly(vinylidene fluoride) by Diethylenetriamine as a Supported Anion Exchange Membrane for Lithium Salt Concentration by Hybrid Capacitive Deionization.

This paper shows the investigation for the optimal anion exchange membranes (AEM) supporting the desorption step of the HCDI process. The chemical modification of PVDF by diethylene triamine created the AEM. To confirm the ion-exchange character of materials, the chemical analysis with FTIR, SEM, surface energetics, and transportation analysis were applied. Next, the investigated membranes were applied for the sorption and desorption of lithium chloride. The specific sorptive parameters were higher according to the incorporation of the nitrogen groups into polymeric chains. Considering the desorption efficiency, membranes modified by four days were selected for further evaluation. The application in the HCDI process allowed reaching the desorption efficiency at 90%. The system composed of PVDF-DETA4 membrane was suitable for sorption 30 mg/g of salt. By applying the PVDF-DETA4 membrane, it is possible to concentrate LiCl with four factors. The anion exchange character of the developed membrane was confirmed by adsorption kinetics and isotherms of chlorides, nitrates, sodium, and lithium. The prepared membrane could be considered a perspective material suitable for concentration salt with electro-driven technologies for the above reasons.

Perovskite Solar Cells Employing a PbSO4(PbO)4 Quantum Dot-Doped Spiro-OMeTAD Hole Transport Layer with an Efficiency over 22.

2,2',7,7'-Tetrakis(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene (spiro-OMeTAD), the most widely used hole transport material in high-efficiency perovskite solar cells (PSCs), still has serious defects, such as moisture absorption and poor long-term conductivity, which seriously restrict further improvement of the power conversion efficiency (PCE) and stability of the cell. Herein, to overcome these problems, inorganic salt PbSO4(PbO)4 quantum dots (QDs) are incorporated into spiro-OMeTAD as the hole transport layer (HTL) for the first time. The incorporated PbSO4(PbO)4 QDs significantly hinder the agglomeration of lithium bis(trifluoromethanesulfonyl)-imide and improve the long-term conductivity through the oxidative interaction between PbSO4(PbO)4 QDs and spiro-OMeTAD and hydrophobicity of the HTL. Furthermore, the spiro-OMeTAD:PbSO4(PbO)4 composite film can effectively passivate perovskite defects at the perovskite/HTL interface, resulting in suppressed interfacial recombination. As a result, the PSC based on the spiro-OMeTAD:PbSO4(PbO)4 HTL shows an improved PCE of 22.66%, which is much higher than that (18.89%) of the control device. PbSO4(PbO)4 also significantly improves the moisture stability for 50 days at room temperature (at RH ∼ 40-50%) without encapsulation. This work indicates that inorganic PbSO4(PbO)4 QDs are crucial materials that can be employed as an additive in spiro-OMeTAD to enhance the efficiency and stability of PSCs.

Viscoelastic Relaxation of Polymerized Ionic Liquid and Lithium Salt Mixtures: Effect of Salt Concentration.

Polymerized ionic liquids (PILs) doped with lithium salts have recently attracted research interests as the polymer component in lithium-ion batteries because of their high ionic mobilities and lithium-ion transference numbers. To date, although the ion transport mechanism in lithium-doped PILs has been considerably studied, the role of lithium salts on the dynamics of PIL chains remains poorly understood. Herein, we examine the thermal and rheological behaviors of the mixture of poly(1-butyl-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide (PC4-TFSI)/lithium TFSI (LiTFSI) in order to clarify the effect of the addition of LiTFSI. We show that the glass transition temperature Tg and the entanglement density decrease with the increase in LiTFSI concentration wLiTFSI. These results indicate that LiTFSI acts as a plasticizer for PC4-TFSI. Comparison of the frequency dependence of the complex modulus under the iso-frictional condition reveals that the addition of LiTFSI does not modify the stress relaxation mechanism of PC4-TFSI, including its characteristic time scale. This suggests that the doped LiTFSI, component that can be carrier ions, is not so firmly bound to the polymer chain as it modifies the chain dynamics. In addition, a broadening of the loss modulus spectrum in the glass region occurs at high wLiTFSI. This change in the spectrum can be caused by the responses of free TFSI and/or coordination complexes of Li and TFSI. Our detailed rheological analysis can extract the information of the dynamical features for PIL/salt mixtures and may provide helpful knowledge for the control of mechanical properties and ion mobilities in PILs.