Formulation, Optimization and In-Vivo Characterization of Thermosensitive In-Situ Nasal Gel Loaded with Bacoside a for Treatment of Epilepsy.

The intranasal route has demonstrated superior systemic bioavailability due to its extensive surface area, the porous nature of the endothelial membrane, substantial blood flow, and circumvention of first-pass metabolism. In traditional medicinal practices, Bacopa monnieri, also known as Brahmi, is known for its benefits in enhancing cognitive functions and potential effects in epilepsy. This study aimed to develop and optimize a thermosensitive in-situ nasal gel for delivering Bacoside A, the principal active compound extracted from Bacopa monnieri. The formulation incorporated Poloxamer 407 as a thermogelling agent and HPMC K4M as the Mucoadhesive polymer. A 32-factorial design approach was employed for Optimization. Among the formulations. F7 exhibited the most efficient Ex-vivo permeation through the nasal mucosa, achieving 94.69 ± 2.54% permeation, and underwent a sol-gel transition at approximately 30.48 °C. The study's factorial design revealed that gelling temperature and mucoadhesive strength were critical factors influencing performance. The potential of in-situ nasal Gel (Optimized Batch-F7) for the treatment of epilepsy was demonstrated in an in-vivo investigation using a PTZ-induced convulsion model. This formulation decreased both the occurrence and intensity of seizures. The optimized formulation F7 showcases significant promise as an effective nasal delivery system for Bacoside A, offering enhanced bioavailability and potentially increased efficacy in epilepsy treatment.

A Comparison of Polysorbates and Alternative Surfactants for Interfacial Stress Protection and Mitigation of Fatty Acid Particle Formation in the Presence of an Esterase.

The hydrolysis of polysorbate surfactants in large molecule drug product formulations caused by residual host cell proteins presents numerous stability concerns for pharmaceuticals. The fatty acids (FA) released by polysorbate hydrolysis can nucleate into particulates or challenge the conformational stability of the proteinaceous active pharmaceutical ingredient (API). The loss of intact polysorbate may also leave the Drug Product (DP) vulnerable to interfacial stresses. Polysorbate 20 and 80 are available in several different quality grades (Multi-compendial, Super Refined, Pure Lauric Acid (PLA)/Pure Oleic Acid (POA)). All variations of polysorbate as well as three alternative surfactants: Brij L23, Brij O20 and Poloxamer 188 were compared for their ability to protect against air-water interfacial stresses as well as their risk for developing particulates when in the presence of lipoprotein lipase (LPL) (Pseudomonas). Results show a meaningful difference in the timing and morphology of FA particle formation depending on the type of polysorbate used. All grades of polysorbate, while susceptible to hydrolysis, still offered sufficient protection to interfacial stresses, even when hydrolyzed to concentrations as low as 0.005% (w/v). Alternative surfactants that lack an ester bond were resistant to lipase degradation and showed good protection against shaking stress.

Modeling, the Optimization of the Composition of Emulgels with Ciclopirox Olamine, and Quality Assessment.

The design and development of pharmaceutical products require specific knowledge, time, and investment. Response surface methodology (RSM) is a widely used technique in the design of experiments (DoE) to optimize various processes and products. The aim of this study was to model and produce experimental emulgels containing 1% ciclopirox olamine and to evaluate their physical, rheological, and mechanical properties and their ability to release ciclopirox olamine. The objective was to optimize the composition of the experimental emulgel containing 1% ciclopirox olamine by applying a central composite design based on selected criteria. The surfactant (polysorbate 80) had the greatest influence on the physical, rheological, and mechanical properties of the emulgels, as well as on the release of ciclopirox olamine from these systems. During the optimization process, an emulgel of optimal composition was generated containing 38.27% mineral oil, 6.56% polysorbate 80, and 55.17% hydrogel containing 1% ciclopirox olamine, meeting specified criteria (dependent variables) including the maximum flux of ciclopirox olamine, the minimum sol-gel transition temperature (Tsol/gel), and the minimum particle size of the oil phase. The oil phase particle size (D50) of this emulgel was determined to be 0.337 µm, the system Tsol/gel was 9.1 °C, and the flux of ciclopirox olamine from this gel matrix was calculated to be 1.44 mg/cm2. This emulgel of optimal composition could be used to treat fungal skin diseases.

Poloxamer 188 washing of lipoaspirate improves fat graft survival: A comparative study in nude mice.

BACKGROUND: Autologous fat transplantation is limited by the uncertainty of graft retention, impeding its application. Among the current strategies for processing lipoaspirates, high-density fat (HDF) is recommended owing to the enrichment of stem cells and washing before cotton concentration for simplicity of operation. Poloxamer 188 (P188) washing has been shown to repair the membranes of damaged cells. This study aimed to investigate the effect of P188-washing on fat graft survival and identify the best technique for processing lipoaspirates. METHODS: Lipoaspirates were prepared using centrifugation to obtain HDF, which was then washed with saline or P188 followed by cotton concentration. Tissue integrity, adipocytic activity, and viability of stromal vascular fraction (SVF) in the samples from the 3 groups were assessed. Samples were sequenced in vitro using high-throughput RNA-seq, and differentially expressed genes were validated using qPCR and western blotting (WB). After transplantation under the dorsum of nude mice for 8 weeks, the grafts were extracted and examined for residual volume, histologic characteristics, and vascularization. RESULTS: The HDF and P188 groups showed a higher survival rate of SVF, more Ki67-positive cells, intact tissue structure, and lesser fibrosis than the saline group. There were no significant differences in the density of SVF and residual volume of grafts. HDF showed significantly improved vascularization during 8 weeks. Through RNA-seq and bioinformatic analysis, notable changes in several related genes after transplantation were observed. CONCLUSIONS: P188 treatment can prevent cells from apoptosis and preserve tissue viability, thereby improving graft quality. HDF contains large amounts of SVF and can be regarded as an excellent grafting material.

Mixed-Micelle in Situ Gel as a Candidate for Oral Inflammatory Ulcerative Diseases.

The current treatment for oral inflammatory ulcerative diseases has limitations. In situ forming hydrogels have shown great potential to deliver therapeutic substances for drug delivery to the buccal cavity. This study aimed to prepare and characterize lipid- and surfactant-based mixed micelle in situ gel (MIG) and evaluate whether it can offer more favorable properties than the in situ gel for effective treatment of the disease. Dexamethasone was incorporated into the MIGs particles, based on Poloxamer 407 and chitosan. The lower gelation time at 37 ℃ was considered a criterion to select superior formulations among the different lipid- and surfactant-based candidates. Further characterization was performed to evaluate the opted formulations regarding morphology, physical stability, rheology, texture, and release profile. All formulations were thermoresponsive and had a shorter gelation time as the temperature increased. Dexamethasone was released in a highly controlled manner, and morphological evaluation revealed that the mixed micelle in situ gels had spherical nanoparticles. Thixotropic behavior was observed in all MIGs, indicating a prolonged retention time of the formulation after oral administration. This study has shown that among different MIGs, the one with oleic acid is a more promising candidate than the in situ gel and other MIGs for drug delivery to the buccal cavity.

Bioavailability Enhancement of BCS Class II Raloxifene Hydrochloride by Inclusion Complex and Solid Dispersion Techniques.

OBJECTIVE: Raloxifene hydrochloride (RLX) is used extensively in the treatment of osteoporosis, only 2% of RLX's bioavailability remains after a significant first pass metabolism. Besides coming from BCS class II, RLX is not very soluble in water. Thus, the goal of the current study was to improve RLX solubility by creating an inclusion complex using ß cyclodextrin (ß-CD) as a carrier and solid dispersion with Poloxamer 407. METHODS: Inclusion complex and solid dispersion were made using a variety of techniques, including kneading, co-precipitation, and physical mixing and solid dispersion using different drug to carrier ratios (1:1, 1:2 and 1:3). RESULTS: Inclusion complex made using the co-precipitation method had shown 9-fold improvements in water solubility when compared with plain RLX. In order to assess the optimized complex's compatibility, thermal analysis, and crystallinity, X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy were used. The XRD and DSC study's results indicated that RLX changed from a crystalline to an amorphous state. IC-6 exhibits effective water solubility based on the outcome. However, upon comparison of the two techniques, the ß-CD complexation method shown an impressive rise in drug solubility when compared to solid dispersion.

In-situ gel injection of poloxamer-based metamizole provides long-acting antipyretic effects.

Metamizole easily decomposes in the body and has a short action time and low bioavailability. Hence, frequent injection administrations are needed to maintain its plasma concentration. This study aimed to design and develop an in-situ gel based on poloxamer 407 and 188 to assess its long-acting antipyretic effects. The in-situ gel-forming systep00m with optimum sol-gel transition temperature of 35.9 °C to 36.3 °C could be formed using a combination of P407 at a ratio of 21-23% (w/v) and P188 at a ratio of 2-4% (w/v). In vitro erosion test showed that the in-situ gel's erosion curve and the metamizole release rate both reached about 90% at 6 h, revealing a good linear relationship between the in-situ gel erosion and the drug release. In vitro release test with dialysis tube showed that the release of metamizole from the in-situ gel was remarkably slower than that from the metamizole solution. Approximately 85% of metamizole was released in the dialysis tube within 7 h, implying a good sustained release effect. Pharmacodynamic study showed that the in-situ gel injection extended the action time of metamizole relative to that when using the metamizole solution. Pharmacokinetic study revealed that the in-situ gel significantly increased the blood serum half-life and area under the curve), contributing to a sustained release and improved bioavailability. This study demonstrated that in-situ gel injection could prolong the action of metamizole in the body to reduce the number of administration times and has good clinical application.

Poloxamer 407 modified collagen/ß-tricalcium phosphate scaffold for localized delivery of alendronate.

Systemic administration of alendronate is associated with various adverse reactions in clinical settings. To mitigate these side effects, poloxamer 407 (P-407) modified with cellulose was chosen to encapsulate alendronate. This drug-loaded system was then incorporated into a collagen/ß-tricalcium phosphate (ß-TCP) scaffold to create a localized drug delivery system. Nuclear magnetic resonance spectrum and rheological studies revealed hydrogen bonding between P-407 and cellulose as well as a competitive interaction with water that contributed to the delayed release of alendronate (ALN). Analysis of the degradation kinetics of P-407 and release kinetics of ALN indicated zero-order kinetics for the former and Fickian or quasi-Fickian diffusion for the latter. The addition of cellulose, particularly carboxymethyl cellulose (CMC), inhibited the degradation of P-407 and prolonged the release of ALN. The scaffold's structure increased the contact area of P-407 with the PBS buffer, thereby, influencing the release rate of ALN. Finally, biocompatibility testing demonstrated that the drug delivery system exhibited favorable cytocompatibility and hemocompatibility. Collectively, these findings suggest that the drug delivery system holds promise for implantation and bone healing applications.

The Incorporated Drug Affects the Properties of Hydrophilic Nanofibers.

Hydrophilic nanofibers offer promising potential for the delivery of drugs with diverse characteristics. Yet, the effects of different drugs incorporated into these nanofibers on their properties remain poorly understood. In this study, we systematically explored how model drugs, namely ibuprofen, carvedilol, paracetamol, and metformin (hydrochloride), affect hydrophilic nanofibers composed of polyethylene oxide and poloxamer 188 in a 1:1 weight ratio. Our findings reveal that the drug affects the conductivity and viscosity of the polymer solution for electrospinning, leading to distinct changes in the morphology of electrospun products. Specifically, drugs with low solubility in ethanol, the chosen solvent for polymer solution preparation, led to the formation of continuous nanofibers with uniform diameters. Additionally, the lower solubility of metformin in ethanol resulted in particle appearance on the nanofiber surface. Furthermore, the incorporation of more hydrophilic drugs increased the surface hydrophilicity of nanofiber mats. However, variations in the physicochemical properties of the drugs did not affect the drug loading and drug entrapment efficiency. Our research also shows that drug properties do not notably affect the immediate release of drugs from nanofibers, highlighting the dominant role of the hydrophilic polymers used. This study emphasizes the importance of considering specific drug properties, such as solubility, hydrophilicity, and compatibility with the solvent used for electrospinning, when designing hydrophilic nanofibers for drug delivery. Such considerations are crucial for optimizing the properties of the drug delivery system, which is essential for achieving therapeutic efficacy and safety.

Design and evaluation of curcumin-loaded poloxamer hydrogels as injectable depot formulations.

Poloxamer hydrogels are of interest as injectable depot delivery systems. However, their use for delivering hydrophobic drugs, such as curcumin, is limited due to poor loading capacity. Here, we evaluated the influence of incorporating hydrophobic medium chain triglycerides (MCT) or amphiphilic polyethylene glycol 400 (PEG400) on the physicochemical properties, drug loading, and in vitro compatibility of a curcumin-loaded poloxamer hydrogel. Poloxamer 407 and 188 hydrogel formulations (16:6 w/w) were prepared and MCT and PEG400 (saturated with curcumin) were added to these systems, either alone or in combination, up to a 10 % w/w additive solvent load. Formulation viscoelasticity, gelation behaviour, injectability, morphology and release profiles were assessed. The cytocompatibility of the formulations was also assessed on dermal fibroblasts (HDFn). Both additives increased curcumin loading into the formulation. Addition of MCT to the hydrogel significantly increased its gelation speed, while PEG400 had a less profound impact. Both additive solvents increased the force required to inject the formulation. PEG400 containing systems were single phase, whereas MCT addition created emulsion systems. All formulations released âˆ¼20-30 % of their loaded curcumin in a sustained fashion over 24 h. The modified hydrogel systems showed good biocompatibility on cells when administering up to ∼100-150 µM curcumin into the culture. This study addresses a key limitation in loading hydrophobic drugs into hydrogels and provides a strategy to enhance drug loading and performance of hydrogels by integrating additives such as MCT and PEG400 into the systems.

Amikacin in 30% poloxamer 407 is a versatile local therapy with method of application and outcome documented in 29 dogs.

OBJECTIVE: To report the clinical use, adverse events, and outcomes after using amikacin in 30% poloxamer 407 (amikacin-P407) during open wound management or in a closed wound application in dogs. ANIMALS: 29 client-owned dogs. METHODS: Medical records from January 2017 to August 2023 from a single hospital were reviewed for dogs that received amikacin-P407 in an open or closed wound application. Information reviewed included signalment, nature of wound and/or surgical site infection (SSI), bacterial cultures, amikacin dose, gel volume, route of administration, estimated wound surface area, biochemistry parameters, urine casts, wound progression, and general clinical outcome. RESULTS: Amikacin-P407 was applied during open wound care (10 dogs), via injection (5 dogs), and at time of wound closure (13 dogs) and was used both in open and closed wound management (1 dog). Wounds were associated with SSIs in 18 of 30 sites. Multidrug resistance was noted in 21 of 30 preapplication cultures. Median amikacin dose was 14.5 mg/kg (range, 3 to 59.5 mg/kg), median total volume was 5.0 mL (range, 1 to 12 mL), and median tissue surface area was 6.6 cm2 (range, 1.6 to 36 cm2), for a local wound dose of 62.5 mg/cm2 (range, 6.9 to 214.3 mg/cm2). No short-term adverse local or systemic effects were noted in any wounds or dogs. No dehiscence was seen in 17 of 19 closed sites. CLINICAL RELEVANCE: The results of this case series suggested that Amikacin-P407 can be applied in a variety of ways with no adverse effects. Amikacin-P407 may be considered in open wound management or in a closed setting for infected wounds and SSIs.

Rheological and Injectability Evaluation of Sterilized Poloxamer-407-Based Hydrogels Containing Docetaxel-Loaded Lipid Nanoparticles.

Nanostructured lipid carriers (NLCs) have the potential to increase the bioavailability and reduce the side effects of docetaxel (DTX). However, only a small fraction of nanoparticles given intravenously can reach a solid tumor. In situ-forming gels combined with nanoparticles facilitate local administration and promote drug retention at the tumor site. Injectable hydrogels based on poloxamer 407 are excellent candidates for this hybrid nanoparticle-hydrogel system because of their thermoresponsive behavior and biocompatibility. Therefore, this work aimed to develop injectable poloxamer hydrogels containing NLCs for intratumoral delivery of DTX. To ensure sterility, the obtained hydrogels were autoclaved (121 °C for 15 min) after preparation. Then, the incorporation of NLCs into the poloxamer hydrogels and the impact of steam sterilization on the nanocomposite hydrogels were evaluated concerning sol-gel transition, injectability, and physicochemical stability. All formulations were extruded through the tested syringe-needle systems with acceptable force (2.2-13.4 N) and work (49.5-317.7 N·mm) of injection. Following steam sterilization, injection became easier in most cases, and the physicochemical properties of all hydrogels remained practically unchanged according to the spectroscopical and thermal analysis. The rheological evaluation revealed that the nanocomposite hydrogels were liquid at 25 °C and underwent rapid gelation at 37 °C. However, their sterilized counterparts gelled at 1-2 °C above body temperature, suggesting that the autoclaving conditions employed had rendered these nanocomposite hydrogels unsuitable for local drug delivery.

Improving material properties of a poloxamer P407 hydrogel-based hydroxyapatite bone substitute material by adding silica-A comparative in vivo study.

The structure and handling properties of a P407 hydrogel-based bone substitute material (BSM) might be affected by different poloxamer P407 and silicon dioxide (SiO2) concentrations. The study aimed to compare the mechanical properties and biological parameters (bone remodeling, BSM degradation) of a hydroxyapatite: silica (HA)-based BSM with various P407 hydrogels in vitro and in an in vivo rat model. Rheological analyses for mechanical properties were performed on one BSM with an SiO2-enriched hydrogel (SPH25) as well on two BSMs with unaltered hydrogels in different gel concentrations (PH25 and PH30). Furthermore, the solubility of all BSMs were tested. In addition, 30 male Wistar rats underwent surgical creation of a well-defined bone defect in the tibia. Defects were filled randomly with PH30 (n = 15) or SPH25 (n = 15). Animals were sacrificed after 12 (n = 5 each), 21 (n = 5 each), and 63 days (n = 5 each). Histological evaluation and histomorphometrical quantification of new bone formation (NB;%), residual BSM (rBSM;%), and soft tissue (ST;%) was conducted. Rheological tests showed an increased viscosity and lower solubility of SPH when compared with the other hydrogels. Histomorphometric analyses in cancellous bone showed a decrease of ST in PH30 (p = .003) and an increase of NB (PH30: p = .001; SPH: p = .014) over time. A comparison of both BSMs revealed no significant differences. The addition of SiO2 to a P407 hydrogel-based hydroxyapatite BSM improves its mechanical stability (viscosity, solubility) while showing similar in vivo healing properties compared to PH30. Additionally, the SiO2-enrichment allows a reduction of poloxamer ratio in the hydrogel without impairing the material properties.

Advanced Chemical and Imaging Methods for Studying Structure Morphology and Excipients Solid State Transformations in Pharmaceutical Multiparticulate Formulations.

The formulation of paediatric medicines faces significant challenges to meet the requirements for safe and accurate administration, while maintaining a suitable taste. Multiparticulate formulations have a strong potential to address these challenges because they combine dose flexibility with ease of administration. Understanding the stability of multiparticulate formulations over storage as a function of time and environmental parameters, such as humidity and temperature, is important to manage their commercialisation and use. In this work, we have expanded the toolkit of available techniques for studying multiparticulates beyond those such as scanning electron microscopy (SEM) and confocal laser scanning microscopy. We include advanced methods of environmentally-controlled SEM to monitor temperature- and humidity-induced changes in-situ, and a variety of Raman spectroscopies including stimulated Raman scattering microscopy to identify and localise the different ingredients at the surface and inside the multiparticulates. These techniques allowed unprecedented monitoring of specific changes to the particulate structure and distribution of individual ingredients due to product aging. These methods should be considered as valuable novel tools for in-depth characterisation of multiparticulate formulations to further understand chemical changes occurring during their development, manufacturing and long-term storage. We envisage these techniques to be useful in furthering the development of future medicine formulations.

Slightly viscous dispersions of mucoadhesive polymers as vehicles for nasal administration of dopamine and grape seed extract-loaded solid lipid nanoparticles.

With the aim to find an alternative vehicle to the most used thermosensitive hydrogels for efficient nanotechnology-based nose-to-brain delivery approach for Parkinson's disease (PD) treatment, in this work we evaluated the Dopamine (DA) and the antioxidant grape seed-derived pro-anthocyanidins (Grape Seed Extract, GSE) co-loaded solid lipid nanoparticles (SLNs) put in slight viscous dispersions (SVDs). These SVDs were prepared by dispersion in water at low concentrations of mucoadhesive polymers to which SLN pellets were added. For the purpose, we investigated two polymeric blends, namely Poloxamer/Carbopol (PF-127/Carb) and oxidized alginate/Hydroxypropylmethyl cellulose (AlgOX/HPMC). Rheological studies showed that the two fluids possess Newtonian behaviour with a viscosity slightly higher that water. The pH values of the SVDs were mainly within the normal range of nasal fluid as well as almost no osmotic effect was associated to both SVDs. All the SVDs were capable to provide DA permeation through nasal porcine mucosa. Moreover, it was found that PF-127/Carb blend possesses penetration enhancer capability better than the Alg OX/HPMC combination. Flow cytometry studies demonstrated the uptake of viscous liquids incorporating fluorescent SLNs by human nasal RPMI 2650 cell in time-dependent manner. In conclusion, the SVD formulations may be considered promising alternatives to thermosensitive hydrogels strategy. Moreover, in a broader perspective, such SVD formulations may be also hopeful for treating various neurological diseases beyond PD treatment.

Hydrochromic and piezochromic dual-responsive optical film derived from poloxamer and ethyl cellulose for visual fingerprints identification.

Developing new materials that could identify fingerprint using the naked eye and observe the level 3 microscopic details is challenging. Here, we designed a novel hydrochromic and piezochromic dual-responsive optical film, which achieved the visual transparency transition. The performances of hydrochromic and piezochromic responses from high transparency to opaque whiteness were attributed to the introduction of poloxamer. The hygroscopic swelling of the disordered micelles led to light scattering, causing the hydrochromic response. The piezochromic response may be ascribed to the microcracks in the fragments of poloxamer crystals, which changed the refractive index of light. The fascinating combination of hydrochromic and piezochromic response was effectively applied in fingerprint identification. Hydrochromic response accurately recognized sweat pores, and piezochromic response could gradually reveal the ridges and valleys according to the different color of imprinted fingerprints. The film could identify fake fingerprints based on the differences in sweat pores between fake fingerprints and living fingers. More importantly, the film could easily detected not only the clear ridges but also the detailed sweat pores using the naked eye, indicating that the film has profound research significance in fingerprint analysis and liveness fingerprint detection.

Spectroscopic characterization and pharmacokinetic evaluation of amorphous solid dispersions of glibenclamide for bioavailability enhancement in Wistar rats.

Oral bioavailability of glibenclamide (Glb) was appreciably improved by the formation of an amorphous solid dispersion with Poloxamer-188 (P-188). Poloxamer-188 substantially enhanced the solubility and thereby the dissolution rate of the biopharmaceutics classification system (BCS) class II drug Glb and simultaneously exhibited a better stabilizing effect of the amorphous solid dispersion prepared by the solvent evaporation method. The physical state of the dispersed Glb in the polymeric matrix was characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscope and Fourier transform infrared studies. In vitro drug release in buffer (pH 7.2) revealed that the amorphous solid dispersion at a Glb-P-188 ratio of 1:6 (SDE4) improved the dissolution of Glb by 90% within 3 h. A pharmacokinetic study of the solid dispersion formulation SDE4 in Wistar rats showed that the oral bioavailability of the drug was greatly increased as compared with the market tablet formulation, Daonil®. The formulation SDE4 resulted in an AUC0-24h ~2-fold higher. The SDE4 formulation was found to be stable during the study period of 6 months.

Polyphenol nanoparticles based on bioresponse for the delivery of anthocyanins.

Anthocyanin (AN) has good antioxidant and anti-inflammatory bioactivities, but its poor biocompatibility and low stability limit the application of AN in the food industry. In this study, core-shell structured carriers were constructed by noncovalent interaction using tannic acid (TA) and poloxamer 188 (F68) to improve the biocompatibility, stability and smart response of AN. Under different treatment conditions, TA-F68 and AN were mainly bound by hydrophobic interaction. The PDI is less than 0.1, and the particle size of nanoparticles (NPs) is uniform and concentrated. The retention of the complex was 15.50 % higher than that of AN alone after 9 d of light treatment. After heat treatment for 180 min, the retention rate after loading was 13.87 % higher than that of AN alone. The carrier reduce the damage of AN by the digestive environment, and intelligently and sustainedly release AN when the esterase is highly expressed. In vitro studies demonstrated that the nanocarriers had good biocompatibility and significantly inhibited the overproduction of reactive oxygen species induced by oxidative stress. In addition, AN-TA-F68 has great potential for free radical scavenging at sites of inflammation. In conclusion, the constructed nano-delivery system provides a potential application for oral ingestion of bioactive substances for intervention in ulcerative colitis.

Enhanced efficacy of ß-carotene loaded solid lipid nanoparticles optimized and developed via central composite design on breast cancer cell lines.

ß-carotene is obtained from both plants and animals and has been the subject of intense research because of its provitamin-A, antioxidant, and anticancer effects. Its limited absorption and oxidative degradation significantly reduce its antitumor efficacy when taken orally. In our study, we utilize a central composite design to develop "bio-safe and highly bio-compatible" solid lipid nanoparticles (SLNs) by using only the combination of palmitic acid and poloxamer-407, a block co-polymer as a surfactant. The current research aim to develop and characterize SLNs loaded with ß-carotene to improve their bioavailability and therapeutic efficacy. In addition, the improved cytotoxicity of solid lipid nanoparticles loaded with ß-carotene was screened in-vitro in human breast cancer cell lines (MCF-7). The nanoparticles exhibits good stability, as indicated by their mean zeta potential of -26.3 ± 1.3 mV. The particles demonstrated high drug loading and entrapment capabilities. The fabricated nanoparticle's prolonged release potential was shown by the in-vitro release kinetics, which showed a first-order release pattern that adhered to the Higuchi model and showed a slow, linear, and steady release over 48 h. Moreover, a diffusion-type release mechanism was used to liberate ß-carotene from the nanoparticles. For six months, the nanoparticles also showed a notable degree of physical stability. Lastly, using the MTT assay, the anti-cancer properties of ß-carotene-loaded solid lipid nanoparticles were compared with intact ß-carotene on MCF-7 cell lines. The cytotoxicity tests have shown that the encapsulation of ß-carotene in the lipid bilayers of the optimized formulation does not interfere with the anti-cancer activity of the drug. When compared to standard ß-carotene, ß-carotene loaded SLNs showed enhanced anticancer efficacy and it is a plausible therapeutic candidate for enhancing the solubility of water-insoluble and degradation-sensitive biotherapeutics like ß-carotene.

Effects of poloxamer 188 on traumatic brain injury.

Traumatic Brain Injury (TBI) is a major cause of severe disability and death, resulting in significant health care and economic burden. Poloxamer 188, a synthetic tri-block copolymer approved by the FDA, has been studied for its potential effects on traumatic brain injury (TBI). The neuroprotective abilities of P188 have attracted significant attention. This systematic review aims to compile evidence of P188's effect on the treatment of TBI. A comprehensive literature search was conducted using PubMed, SCOPUS, and Google Scholar databases, which yielded 20 articles that satisfied the inclusion criteria. These articles have shown direct protective effects of P188 on brain tissue following TBI, including restitution of the increase cell membrane permeability, attenuation of neuronal necrosis and apoptosis, improvement of mitochondrial viability, reduction in axonal disruption, and restoration of the blood brain barrier. In animals, P188 has been shown to improve sensorimotor functions, as well as spatial learning and memory.