Development of a film-forming oleogel with increased substantivity for the treatment of psoriasis.

The aim of this work was the development of a film-forming formulation (FFF) for the topical treatment of psoriasis that shows an increased substantivity compared to conventional semi-solid dosage forms. The developed formulation is an oleogel. It is based on a combination of castor oil and medium chain triglycerides, and the oil-soluble film former MP-30 (Croda GmbH, Nettetal, Germany), a polyamide that upon mixing with a polar oil entraps the oil und thus substantially increases the viscosity of the formulation up to a semisolid state. Betamethasone dipropionate (BDP) and calcipotriole (CA) were used as active pharmaceutical ingredients (APIs). Oleogels of different compositions were evaluated regarding substantivity, rheological properties, ex-vivo penetration into the skin and ex-vivo permeation through the skin. Marketed products were used as controls. It was found that the amount of betamethasone dipropionate penetrating and permeating into and through the skin from the film-forming formulation is at an intermediate value compared to the marketed products. The substantivity of the developed formulation is described by an amount of 57.7 % formulation that remains on the skin surface and is thus significantly higher compared to the marketed products. In the film forming formulation, the proportion of API penetrating the skin remains the same when the skin repetitively brought in contact with a piece of textile during the penetration experiment. In contrast with the in-market formulations tested, this proportion was reduced by up to 97 %. As a result, the developed formulations can lead to an increased patient compliance.

Glucocorticoids, sodium transport mediators, and respiratory distress syndrome in preterm infants.

BACKGROUND: Antenatal glucocorticoids (GCs) reduce respiratory distress syndrome (RDS) in preterm infants and are associated with reduced lung liquid content. Our aim was to assess whether airway gene expression of mediators of pulmonary epithelial sodium and liquid absorption, and further, respiratory morbidity, associate with cord blood GC concentrations. METHODS: The study included 64 infants delivered <32 weeks gestation. Cortisol and betamethasone in umbilical cord blood were quantified with liquid chromatography-tandem mass spectrometry. The total GC concentration was calculated. Gene expression of the epithelial sodium channel (ENaC), Na,K-ATPase, and serum- and GC-inducible kinase 1 at <2 h and at 1 day postnatally in nasal epithelial cell samples was quantified with reverse transcription-polymerase chain reaction. The mean oxygen supplementation during the first 72 h was calculated. RESULTS: Concentrations of cord blood betamethasone and total GC were significantly lower in infants with RDS and correlated with mean oxygen supplementation. Expression of αENaC and α1- and ß1Na,K-ATPase at <2 h correlated with betamethasone and total GC concentrations. Expression of Na,K-ATPase was lower in infants with RDS. CONCLUSION: Enhancement of lung liquid absorption via increased expression of sodium transporters may contribute to the beneficial pulmonary effects of antenatal GCs. IMPACT: RDS is related to lower umbilical cord blood GC concentrations and lower airway expression of sodium transporters. In addition to the timing of antenatal GC treatment, resulting concentrations may be of importance in preventing RDS. Induction of sodium transport may be a factor contributing to the pulmonary response to antenatal GCs.

Anti-Inflammatory Properties of Injectable Betamethasone-Loaded Tyramine-Modified Gellan Gum/Silk Fibroin Hydrogels.

Rheumatoid arthritis is a rheumatic disease for which a healing treatment does not presently exist. Silk fibroin has been extensively studied for use in drug delivery systems due to its uniqueness, versatility and strong clinical track record in medicine. However, in general, natural polymeric materials are not mechanically stable enough, and have high rates of biodegradation. Thus, synthetic materials such as gellan gum can be used to produce composite structures with biological signals to promote tissue-specific interactions while providing the desired mechanical properties. In this work, we aimed to produce hydrogels of tyramine-modified gellan gum with silk fibroin (Ty-GG/SF) via horseradish peroxidase (HRP), with encapsulated betamethasone, to improve the biocompatibility and mechanical properties, and further increase therapeutic efficacy to treat rheumatoid arthritis (RA). The Ty-GG/SF hydrogels presented a ß-sheet secondary structure, with gelation time around 2-5 min, good resistance to enzymatic degradation, a suitable injectability profile, viscoelastic capacity with a significant solid component and a betamethasone-controlled release profile over time. In vitro studies showed that Ty-GG/SF hydrogels did not produce a deleterious effect on cellular metabolic activity, morphology or proliferation. Furthermore, Ty-GG/SF hydrogels with encapsulated betamethasone revealed greater therapeutic efficacy than the drug applied alone. Therefore, this strategy can provide an improvement in therapeutic efficacy when compared to the traditional use of drugs for the treatment of rheumatoid arthritis.

Microscopic Study of Injectable Steroids: Effects of Postmixing Time on Particle Aggregation.

BACKGROUND: Epidural steroid injection (ESI) is a common practice for pain treatment since 1953. In 2014, the FDA issued a warning about ESI. Studies have focused on the effect of the particle size and their ability to generate harmful aggregates. Although steroid aggregates provide longer times for reabsorption, therefore a longer anti-inflammatory effect, they are potentially harmful to the central nervous system via embolic mechanisms.Previous studies have established that steroidal aggregates with asizes over 100 mu m are potentially able to occlude blood vessels. Studies by Tiso et al and Benzon et al addressed the role of steroids on CNS adverse events, with similar outcomes. The main difference was on the role of aggregates with a size over 100 mu m, which Benzon et al. attributed to the ability of certain steroid preparations to rapidly precipitate and form large aggregates. OBJECTIVES: Studying the effect of the time elapsed between mixing the steroid preparation and injection on the number and size of aggregates with sizes above 100 mu m. STUDY DESIGN: Original study in basic science. SETTING: Basic scienceMETHODS: Steroids evaluated are commonly used in Spain for ESI: betamethasone, triamcinolone, and dexamethasone. The size and number of the aggregates was determined for undiluted commercial steroid preparations in the usual amount for a single and double dosage used for ESI.Samples were examined with a Leica TCS-SP2 microscope at the first, the fifth and the 30th minute after shaking the preparations. Aggregates observed in the different preparations were manually counted and grouped in the following size range: 0-20, 20-50, 50-100, 100-300, 300-500 and > 500 mu m.Statistical analysis was carried out using the R software. Nonparametric techniques were used in the comparison of aggregate size. Global comparison of the groups using the Kruskal-Wallis test and post-hoc comparisons using the Wilcoxon test, adjusting P-values by the Holm method for multiple comparisonsRESULTS: Aggregates present in triamcinolone and betamethasone samples were statistically larger than in dexamethasone samples. Triamcinolone suspensions produced significantly larger aggregates than betamethasone five minutes after mixing. Triamcinolone preparations produced greater particle aggregates (> 500 mu m), which were not present in dexamethasone and betamethasone preparations. LIMITATIONS: Study how the human internal factors like blood elements and spinal fluid could interact with steroids and influence the size of the aggregates formed. CONCLUSIONS: This study demonstrates that the size of the particles injected depends on the type of steroid and the time allowed between mixing and injecting. The results demonstrate that waiting longer than 5 minutes between mixing and injecting can predispose the formation of potentially harmful aggregates in triamcinolone and betamethasone samples. The presence of greater particle aggregates (> 500 mu m) may occlude some important vessels and arteries with serious adverse results. Vigorous shaking of the injectable could prevent such events. KEY WORDS: Epidural steroid injection, triamcinolone, betamethasone, dexamethasone, steroid aggregates.

Flexible liposomal gel dual-loaded with all-trans retinoic acid and betamethasone for enhanced therapeutic efficiency of psoriasis.

BACKGROUND: Psoriasis is a chronic immune-mediated inflammatory skin disease without effective treatment. The utilization of all trans-retinoic acid (TRA) and betamethasone (BT) for the treatment of psoriasis is still facing difficulties, due to their relatively poor stability, limited skin permeation, and systemic side effects. Flexible liposomes are excellent in deeper skin permeation and reducing the side effects of drugs, which is promising for effective treatment of skin disorders. This work aimed to establish dual-loaded flexible liposomal gel for enhanced therapeutic efficiency of psoriasis based on TRA and BT. RESULTS: Flexible liposomes co-loaded with TRA and BT were successfully prepared in our study. The characterization examination revealed that flexible liposomes featured nano-sized particles (around 70 nm), high drug encapsulation efficiency (> 98%) and sustained drug release behaviors. Flexible liposomes remarkably increased the drug skin permeation and retention as compared with free drugs. Results on HaCaT cells suggested that flexible liposomes were nontoxic, and its cellular uptake has a time-dependent manner. In vivo studies suggested the topical application of TRA and BT dual-loaded liposomal gel had the best ability to reduce the thickness of epidermal and the level of cytokines (TNF-α and IL-6), largely alleviating the symptoms of psoriasis. CONCLUSIONS: Flexible liposomal gel dual-loaded with TRA and BT exerted a synergistic effect, which is a promising topical therapeutic for the treatment of psoriasis.

Is 9ß-dehydrohalogenation of betamethasone and dexamethasone hindering the detection of banned co-eluting meprednisone? A reverse-phase chiral liquid chromatography high-resolution mass spectrometry approach.

Mass spectral analysis of dexamethasone and betamethasone reveal intense signals at m/z 373.19994 (using a Thermo Q Exactive high-resolution mass spectrometer coupled with Dionex UltiMate 3000 UHPLC + operated in the positive ion mode), matching the signal of meprednisone, the 11-oxo version of methylprednisolone, along with its parent signal; possibly due to dehydrohalogenation of these drugs at MS. The parent mass of meprednisone is exactly same as that of dehydrohalogenated mass of dexamethasone and betamethasone; and are co-eluting, displaying same mass spectra. Specifically when they are administered together, identifying meprednisone (a drug for which there is zero tolerance in some regions of the world), is a great challenge with currently available techniques because it could be easily mistaken for dexamethasone or betamethasone, drugs allowed at certain threshold limits for therapeutic considerations. False negative results could be obtained in conventional reverse-phase chromatography and are liable to be abused; hence, establishing "zero tolerance" limits for these compounds often proves ineffective. In this paper, present an effective and reliable analytical method for simultaneously separating and identifying dexamethasone, betamethasone and meprednisone in equine urine and plasma using chiral liquid chromatography-electrospray ionization-mass spectrometry. From the various columns screened, the Lux i-Cellulose-5 chiral column produced high-quality results with extremely good separation. During this study, it is quite evident that dehydrohalogenation occurs only in the mass ionization source; the compounds are very stable in-vivo/in-vitro and do not break down either on-column or during sample preparation.

In silico and in vitro Study of the Inhibitory Effect of Antiinflammatory Drug Betamethasone on Two Lipases.

BACKGROUND: For the first time, the anti-inflammatory drug betamethasone is investigated for its inhibitory activity against lipase. OBJECTIVE: This work aims to demonstrate the in vitro and in silico inhibitory effect of the anti-inflammatory drug betamethasone on the enzymatic activity of two lipases. METHODS: In vitro study using p-nitrophenyllaurate as lipase substrate is used to determine inhibition potency. Molecular Docking is performed using the Autodock Vina for drug molecule and two enzymes Candida rugosa lipase and human pancreatic lipase. RESULTS: Betamethasone represents a moderate inhibition effect with a value of IC50 of 0.36±0.01 mg/ml. Molecular docking allowed us to understand inhibitory - enzyme interactions and to confirm in vitro obtained results. CONCLUSION: These experiments showed that betamethasone can be used in the treatment of diseases related to lipase activity.

Effect of the Ratio of Betamethasone to TNF-α siRNA Coencapsulated in Solid Lipid Nanoparticles on the Acute Proinflammatory Activity of the Nanoparticles.

There is evidence that encapsulating glucocorticoids into nucleic acid-containing nanoparticles reduces the inflammatory toxicities of the nanoparticles. Herein, using betamethasone acetate (BA), a glucocorticoid, and a solid lipid nanoparticle formulation of siRNA, we confirmed that coencapsulating BA into the siRNA solid lipid nanoparticles significantly reduced the proinflammatory activity of the siRNA nanoparticles in a mouse model. Using TNF-α siRNA, we then showed that the BA and TNF-α siRNA coencapsulated into the solid lipid nanoparticles acted as a dual anti-inflammatory and synergistically reduced TNF-α release by mouse macrophages in culture following stimulation with lipopolysaccharide, as compared to solid lipid nanoparticles encapsulated with TNF-α siRNA or BA alone. Importantly, upon studying the effect of the ratio of BA and TNF-α siRNA on the proinflammatory activity of the resultant nanoparticles, we identified that BA and TNF-α siRNA coencapsulated solid lipid nanoparticles prepared with a BA to TNF-α siRNA weight ratio of 2:1 induced the lowest proinflammatory cytokine production by macrophages in culture. This result was in comparison to nanoparticles prepared with BA to TNF-α siRNA ratios both higher and lower than 2:1 (i.e., 4:1, 1:1, and 0.5:1) and is likely due to differences in molecular interactions among the various components in the BA and TNF-α-siRNA coencapsulated solid lipid nanoparticles at these ratios. Encapsulating glucocorticoids into siRNA-nanoparticles represents a viable strategy to reduce the proinflammatory activity of the nanoparticles; however, the ratio of the glucocorticoid to siRNA in the nanoparticles requires optimization.

DoE-based development, physicochemical characterization, and pharmacological evaluation of a topical hydrogel containing betamethasone dipropionate microemulsion.

This study was performed to achieve two primary goals: First, a microemulsion containing betamethasone dipropionate was optimized using the quality by design approach. Second, a hydrogel-containing microemulsion was developed using cellulose derivatives, and its anti-inflammatory and skin irritation effects were evaluated. Face-centered central composite design was used to investigate the impacts of two independent variables (oleic acid and ratio of surfactant to cosolvent, S/CoS) on three dependent variables (skin deposition, flux of BMD, and microemulsion droplet size). The microemulsion including oleic acid at a low level (coded with -1) and S/CoS at a high level (coded with +1) was considered optimal since it was the most effective in terms of skin deposition and flux of BMD. Different cellulose derivatives (HPMC E6, HEC, NaCMC, and CMC) were screened to prepare a hydrogel-containing microemulsion based on four properties: flux and skin deposition of BMD, hydration of stratum corneum, and rheological properties of hydrogel-containing microemulsion (ME-hydrogel). The anti-inflammatory effect and flux of BMD from optimal ME-hydrogel with carboxymethyl cellulose as the hydrogel-forming agent were then compared to those of the hydrogel-containing solid lipid nanoparticles (SLN-hydrogel) and nanostructure lipid carriers (NLC-hydrogel). The percentage of edema inhibition declined proportionally with flux of BMD in the following order: ME-hydrogel (44.56 ±â€¯8.08%) > NLC-hydrogel (35.93 ±â€¯7.22%) > SLN-hydrogel (25.68 ±â€¯9.05%).

Development of a simple method for simultaneous determination of tazarotene and betamethasone dipropionate and their metabolites using LC-MS method and its application to dermatopharmacokinetic study.

In our study, a method for the determination for tazarotene and betamethasone dipropionate in human tissue-engineered skin was established. Tazarotene gel, betamethasone dipropionate cream or a combination cream was administered to the skin. Then the skin was taken off at 0.25, 0.75, 1.75, 3, 5, 8, 12, 24, 36, 48 h time points after the residual drug was removed. The concentrations of tazarotene, betamethasone dipropionate and their major metabolites in skin were determined by LC-MS. Tazarotene and tazarotenic acid were detected in the concentration range of 2-200 µg/mL with an LLOQ of 2 µg/mL. Betamethasone dipropionate was detected in the concentration range 0.5-300 µg/mL with an LLOQ of 0.5 µg/mL, and betamethasone was detected at 2-200 µg/mL with an LLOQ of 2 µg/mL. The intra- and inter-day precisions of the four analytes in the skin homogenate were all <15% (RSD, %). The results showed that tazarotene could be metabolized to tazarotenic acid and betamethasone dipropionate could be metabolized to betamethasone in tissue-engineered skin. The results also revealed that this method was suitable for the simultaneous determination of tazarotene, betamethasone dipropionate and their metabolites in tissue-engineered skin.

Influence of emulsifier concentration on partition behavior and chemical stability of betamethasone dipropionate in emulsion gels.

The partitioning of active pharmaceutical ingredients (API) in emulsions is influenced by various factors, such as composition of the phases, emulsifier type and concentration, and temperature. Therefore, the chemical stability of the API can be influenced by its partitioning into the aqueous phase as degradation is typically facilitated in water. With increasing emulsifier concentration from 0.15% to 5.0%, more betamethasone dipropionate (BDP) was solubilized in polysorbate 80 micelles leading to a small, but increased fraction of BDP exposed to the aqueous phase along with preferential partitioning of BDP to the aqueous phase and thus increased degradation. Similarly, by enhancing solubility and partitioning to the aqueous phase, the addition of polyethylene glycol 400 also led to increased BDP degradation. Due to pH dependent degradation of BDP, increasing emulsifier concentrations resulted in a more pronounced degradation of BDP at pH 8, which is beyond the stability optimum, whereas at pH 5 the API was sufficiently stable and no differences in concentration were detected within 12 weeks even under accelerated conditions. No significant differences were seen with the varying emulsifier concentrations regarding ex vivo skin penetration.

Cross-linked chitosan in nano and bead scales as drug carriers for betamethasone and tetracycline.

Chitosan nanoparticles and chitosan beads were synthesized through the ionic gelation procedure in which sodium citrate was used as the cross-linking agent. The prepared nanoparticles were characterized by using transmission electron microscopy (TEM), X-ray diffraction (XRD), zeta potential, and Fourier transform infrared (FT-IR) spectroscopy. The synthesized nanoparticles and beads were examined as drug carriers for controlled release of two important drugs including betamethasone and tetracycline. For this purpose, various properties such as swelling behavior, loading capacity, encapsulation efficiency, and release degree of the particles were obtained. The effect of pH on the aforementioned parameters was also studied. The results indicated that the amount of drug released from chitosan nanoparticles is lower than that released from chitosan beads. It was also found that the release degree for both of the drugs at the pH of 4.8 is much larger than that at the pH of 7.4.

Validated Chromatographic Methods for Simultaneous Determination of Calcipotriol Monohydrate and Betamethasone Dipropionate in the Presence of Two Dosage Form Additives.

Two chromatographic methods were developed, optimized and validated for simultaneous determination of calcipotriol monohydrate (CPM) and betamethasone dipropionate (BMD) in the presence of two dosage form additives named; butylated hydroxytoluene (BHT) and alpha-tocopherol (TOCO). The proposed methods were accurate, sensitive and specific. The first method based on using aluminum thin-layer chromatographic plates precoated with silica gel GF254 as a stationary phase and chloroform-ethyl acetate-toluene (5:5:3, by volume) as a developing system. This was followed by densitometric measurement of the separated bands at 264 nm. Whereas the second method is RP-HPLC where OnyxMonolithic C18® column was used with a gradient profile using methanol, water and acetic acid at flow rate 2.0 mL min-1. Detection was carried out at 264 nm. The methods were validated according to ICH guidelines. The specificity of the developed methods was investigated by analyzing the pharmaceutical dosage form. The validity of the proposed methods was assessed using the standard addition technique. The obtained results were statistically compared with those obtained by the official methods, showing no significant difference with respect to accuracy and precision at P = 0.05.

Development of Betamethasone Dipropionate-Loaded Nanostructured Lipid Carriers for Topical and Transdermal Delivery.

INTRODUCTION: Betamethasone dipropionate is a highly effective corticosteroid anti-inflammatory. However, the main drawback of its topical use is the limited skin penetration into deeper skin layers. Also, its systemic use has shown many side effects. OBJECTIVE: The goal of this research was to formulate betamethasone dipropionate in nanostructured lipid carriers (NLC) formulae that contain oleic acid to aid its penetration to deeper skin layers and to aid absorption to local regions upon topical application. METHODS: NLC formulae were prepared by high shear homogenization then sonication. Formulae were characterized for their particle size, size distribution, electric potential, occlusion factor, entrapment efficiency, drug loading, transmission electron microscopy, in vitro drug release, and ex vivo skin penetration. Compatibility of ingredients with drug was tested using differential scanning calorimetry. Formulae were shown to have appropriate characteristics. NLC formulae were superior to traditional topical formulation in drug release. RESULTS: Upon testing ex vivo skin penetration, betamethasone dipropionate prepared in NLC formulae was shown to penetrate more efficiently into skin layers than when formulated as a traditional cream. NLC formulation that contained higher percentage of oleic acid showed higher penetration and higher amount of drug to pass through skin. CONCLUSION: In general, NLC with lower oleic acid percentage was shown to deliver betamethasone dipropionate more efficiently into deeper skin layers while that of a higher oleic acid percentage was shown to deliver the drug more efficiently into deeper skin layers and through the skin, transdermally.

Mixtures of betamethasone butyrate propionate ointments and heparinoid oil-based cream: Physical stability evaluation.

Betamethasone butyrate propionate ointment (BBPO) is mainly used for adult patients in dermatology and is often prescribed as a mixture containing a base or moisturizing cream for various reasons. However, in the case of a moisturizing cream, since this formulation is composed of various ingredients, a physical change is expected to occur by mixing it with an ointment. Therefore, in the present study, the physical stability of a mixture of four BBPO formulations and heparinoid oily cream (HPOC) was examined. Layer separation was observed in all mixtures following centrifugation. The near-infrared (NIR) measurement showed a peak at 5200 cm-1 on the lower layer side, which strongly suggests the presence of water. The peak at 5200 cm-1 in the middle layer was hardly observed in the mixtures of two BBPO generic formulations and HPOC, thus suggesting that the separation was more advanced in those mixtures than in the others. These two mixtures separated into a semisolid layer (upper side) and a liquid layer (lower side) after 3 h of storage at 37 °C. The NIR measurement of each layer revealed that most of the semisolid layer was oil while the liquid layer was water. Furthermore, backscattered light measurements were conducted to monitor the behavior of the mixture's layer separation. An evaluation using model formulations revealed that the layer separation of the mixtures was due to the propylene glycol (PG) and surfactant content of the two generic BBPO formulations. Thus, these findings suggest that excipients need to be considered in selecting formulations for mixtures of skin preparations.

A Prospective, Open-Label Study Evaluating Adjunctive Calcipotriene 0.005%/Betamethasone Dipropionate 0.064% Foam in Psoriasis Patients With Inadequate Response to Biologic Therapy.

OBJECTIVE: To assess the effectiveness and safety of combining calcipotriene 0.005%/betamethasone dipropionate 0.064% (Cal/BD) foam with biologic therapies for patients with plaque psoriasis who have not obtained an adequate response with biologic therapy. METHODS: This was a prospective, open-label, single-arm study of patients with chronic plaque-type psoriasis (body surface area [BSA] ≤5%) who were being treated with biologic agents for ≥24 weeks. All patients received once-daily Cal/BD foam for 4 weeks, followed by twice-weekly use on consecutive days for 12 weeks (maintenance regimen). The end points were assessed at weeks 4 and 16, and included the Physician's Global Assessment (PGA), BSA, PGA×BSA, Dermatology Life Quality Index (DLQI), and Treatment Satisfaction Questionnaire for Medication (TSQM)-9. Safety evaluations included assessments of local skin reactions and adverse events (AEs). RESULTS: Enrolled were 25 patients (18 men and 7 women; mean age, 53 ± 11 years). Patients had significant disease activity despite being on stable biologic therapy (median values: BSA, 3%; PGA, 3; PGA×BSA, 8). At weeks 4 and 16 versus baseline, adjunctive therapy with Cal/BD foam significantly improved PGA score (1 vs 1 vs 3; P less than .01), BSA involvement (1% vs 1% vs 3%; P less than .01), and PGA×BSA measure (1 vs 1 vs 8; P less than .01). Most patients achieved treat-to-target criteria for BSA ≤1% and PGA ≤1 at week 4 (both 76%) and week 16 (both 68%) versus 12% and 4%, respectively, at baseline. Quality of life was improved at both weeks 4 and 16, with high treatment satisfaction. Overall, adjunctive Cal/BD foam was safe and well-tolerated, with no serious AEs. CONCLUSIONS: Adjunctive therapy with Cal/BD foam was associated with an improvement of every measure of disease activity in patients with inadequate response to biologics, an effect that was maintained throughout the study. The majority of patients achieved treat-to-target goals. J Drugs Dermatol. 2018;17(8):845-850.

Influences of the vehicle in the spreading and release of betamethasone.

AIM: We compared the performances of two different commercial products both based on betamethasone and an antibiotic but using different pharmaceutical vehicles: a polymer and lipid-enriched cream and a conventional oil-in-water emulsion. METHODOLOGY: Evaluation was conducted on a reconstructed human epidermis model. Moreover, skin barrier properties and cutaneous hydration of the two vehicles were evaluated on 20 human healthy volunteers. RESULTS: Overall, the polymer and lipid-enriched formulation works as a film-forming product that retains the therapeutic agent for a long time, ensuring its penetration and absorption through the skin, and promoting skin hydration. CONCLUSION: The above characteristics are useful in the clinical setting, especially in the context of eczematous diseases with a strong xerotic component.

Selective liposome targeting of folate receptor positive immune cells in inflammatory diseases.

Activated macrophages play a key role in the development and maintenance of inflammatory diseases such as atherosclerosis, lupus, psoriasis, rheumatoid arthritis, ulcerative colitis, and many others. These activated macrophages, but not resting or quiescent macrophages highly up-regulate folate receptor beta (FR-ß). This differential expression of FR-ß provides a mechanism to selectively deliver imaging and therapeutic agents utilizing folate as a targeting molecule. In an effort to determine whether inflammatory diseases can be targeted utilizing a folate-linked nanosize carrier, a PEG-coated liposome was prepared that incorporated a folate conjugated PEG that also could transport imaging or therapeutic cargo. We demonstrate that these folate-liposomes specifically bind to folate receptor positive cells and accumulate at sites of inflammation in mouse models of colitis and atherosclerosis. These two animal models show that folate-targeted liposomes could be successfully utilized to deliver fluorescent molecules and an anti-inflammatory drug (betamethasone) for diagnostic and therapeutic applications.

Topically used corticosteroids: What is the big picture of drug product degradation?

Corticosteroids are widely used in topical formulations such as creams (aqueous) and ointments (non-aqueous). The generally used corticosteroids show large molecular resemblance, where especially the 20-keto-21-hydroxyl group bound to the 17 carbon is important for their chemical stability. Oxidation in both aqueous and non-aqueous environment occurs for triamcinolone acetonide (TCA), hydrocortisone (HC) and desoximethasone (DS). Besides the 20-keto-21-hydroxyl group, TCA, HC and DS have different other moieties attached to the same C17. These moieties are shown to influence not only the type of degradation product formed but also the degradation kinetics. Seven degradation products are found in total and a degradation mechanism is proposed. Furthermore the transesterfication of betamethasone-17-valerate to betamethasone-21-valerate is shown to occur both in aqueous and non-aqueous environment. Finally, a comprehensive scheme of degradation pathways is presented that is applicable for both aqueous and non-aqueous formulations.