Esterification of Fructose-oleic Acid by tert-Butanol/Dimethyl Sulfoxide and by 2-Methyl-2-butanol/Dimethyl Sulfoxide.

In this study two different strategy were followed to obtain a D-fructose-oleic acid ester. One of the strategies has been well established enzymatic synthesis of an ester bond. The other strategy excluded the biocatalyst and only used a mixture of two organic solvents as the reaction media, 2-methyl-2-butanol / dimethyl sulfoxide or tert-butanol / dimethyl sulfoxide for the production of D-fructose-oleic acid ester. Ester products obtained were characterised by using FT-IR, NMR, by MS. Product yield was also assessed by HPLC. Results of structural analyses and yield measurement indicated that two approaches produced almost identical ester products.

Hydrogen-Bond-Mediated Aglycone Delivery: Synthesis of ß-d-Fructofuranosides.

The construction of ß-d-fructofuranosidic linkages is one of the major challenges in carbohydrate chemistry. In this work, we developed an efficient method for the synthesis of ß-d-fructofuranosides by using a 6-picoloyl-protected fructofuranosyl thioglycoside as the glycosyl donor. Subsequently, we applied the approach to a wide variety of donors and acceptors. Furthermore, the successful synthesis of levantetrose confirmed its applicability in the multistep synthesis of oligosaccharides.

Melanoidin formed from fructosylalanine contains more alanine than melanoidin formed from d-glucose with L-alanine.

In this study the elemental compositions of melanoidin formed at 160 °C from d-glucose (Glc) and l-alanine (Ala) as well as from fructosylalanine - the corresponding Amadori rearrangement product - were compared. Specific chemical bonds were probed by FTIR spectroscopy. This approach tackles the different chemical pathways for melanoidin formation via the Amadori rearrangement in contrast to the reaction from Glc/Ala. Melanoidins formed from fructosylalanine contain about twice as much nitrogen and therefore amino acid as compared to melanoidin from Glc/Ala and exhibit higher absorption in the UV/Vis. Consequently, melanoidins formed from Glc/Ala contain more sugar degradation products with lower absorption due to a smaller size of the conjugated double bond network.

Scalable, efficient and rapid chemical synthesis of l-Fructose with high purity.

An improved process for chemical synthesis of l-fructose with high purity in large scale from readily available l-sorbose is described. In general, this synthetic scheme is characterized by inexpensive and easily available starting materials, simple and safe experimental procedures, short time period, low environmental impact, and great potential for scaling up. The scale-up experiment (100 g) was carried out to provide 42.7 g of l-fructose with high HPLC purity of 99.65% in total yield of 50.2%. Consequently, the described improvements would be helpful for those who may wish to use l-fructose and promoting the further evaluation of applications of l-fructose.

Synthesis of 1,5-Anhydro-d-fructose derivatives and evaluation of their inflammasome inhibitors.

Synthesis of several 1,5-Anhydro-d-fructose (1,5-AF) derivatives to evaluate inhibitory activities of the inflammasome was carried out. Recently, 1,5-AF reported to suppress the inflammasome, although with only low activity. We focused on the hydration of 2-keto form of 1,5-AF and speculated that this hydration was the cause of low activity. Therefore, we synthesized some 1,5-AF derivatives that would not be able to form the dimer conformation and can be expected to have high activity against inflammasome, and then evaluated their inhibitory activities with respect to the NLRP3 inflammasome by using mouse bone marrow-derived macrophages and human THP-1 cells. As a result, some synthesized 2-keto form compounds had much higher inhibitory activities with respect to the NLRP3 inflammasome than did 1,5-AF.

Theoretical Insight into the Conversion Mechanism of Glucose to Fructose Catalyzed by CrCl2 in Imidazolium Chlorine Ionic Liquids.

To better understand the efficient transformation of glucose to fructose catalyzed by chromium chlorides in imidazolium-based ionic liquids (ILs), density functional theory calculations have been carried out on a model system which describes the catalytic reaction by CrCl2 in 1,3-dimethylimidazolium chlorine (MMImCl) ionic liquid (IL). The reaction is shown to involve three fundamental processes: ring opening, 1,2-H migration, and ring closure. The reaction is calculated to exergonic by 3.8 kcal/mol with an overall barrier of 37.1 kcal/mol. Throughout all elementary steps, both CrCl2 and MMImCl are found to play substantial roles. The Cr center, as a Lewis acid, coordinates to two hydroxyl group oxygen atoms of glucose to bidentally rivet the substrate, and the imidazolium cation plays a dual role of proton shuttle and H-bond donor due to its intrinsic acidic property, while the Cl- anion is identified as a Bronsted/Lewis base and also a H-bond acceptor. Our present calculations emphasize that in the rate-determining step the 1,2-H migration concertedly occurs with the deprotonation of O2-H hydroxyl group, which is in nature different from the stepwise mechanism proposed in the early literature. The present results provide a molecule-level understanding for the isomerization mechanism of glucose to fructose catalyzed by chromium chlorides in imidazolium chlorine ILs.

Characterization of a Salmonella sugar kinase essential for the utilization of fructose-asparagine.

Salmonella can utilize fructose-asparagine (F-Asn), a naturally occurring Amadori product, as its sole carbon and nitrogen source. Conversion of F-Asn to the common intermediates glucose-6-phosphate, aspartate, and ammonia was predicted to involve the sequential action of an asparaginase, a kinase, and a deglycase. Mutants lacking the deglycase are highly attenuated in mouse models of intestinal inflammation owing to the toxic build-up of the deglycase substrate. The limited distribution of this metabolic pathway in the animal gut microbiome raises the prospects for antibacterial discovery. We report the biochemical characterization of the kinase that was expected to transform fructose-aspartate to 6-phosphofructose-aspartate during F-Asn utilization. In addition to confirming its anticipated function, we determined through studies of fructose-aspartate analogues that this kinase exhibits a substrate-specificity with greater tolerance to changes to the amino acid (including the d-isomer of aspartate) than to the sugar.

D-Allulose Production from D-Fructose by Permeabilized Recombinant Cells of Corynebacterium glutamicum Cells Expressing D-Allulose 3-Epimerase Flavonifractor plautii.

A d-allulose 3-epimerase from Flavonifractor plautii was cloned and expressed in Escherichia coli and Corynebacterium glutamicum. The maximum activity of the enzyme purified from recombinant E. coli cells was observed at pH 7.0, 65°C, and 1 mM Co2+ with a half-life of 40 min at 65°C, Km of 162 mM, and kcat of 25280 1/s. For increased d-allulose production, recombinant C. glutamicum cells were permeabilized via combined treatments with 20 mg/L penicillin and 10% (v/v) toluene. Under optimized conditions, 10 g/L permeabilized cells produced 235 g/L d-allulose from 750 g/L d-fructose after 40 min, with a conversion rate of 31% (w/w) and volumetric productivity of 353 g/L/h, which were 1.4- and 2.1-fold higher than those obtained for nonpermeabilized cells, respectively.

Multi-objective optimization for the economic production of d-psicose using simulated moving bed chromatography.

The biocatalytic production of rare carbohydrates from available sugar sources rapidly gains interest as a route to acquire industrial amounts of rare sugars for food and fine chemical applications. Here we present a multi-objective optimization procedure for a simulated moving bed (SMB) process for the production of the rare sugar d-psicose from enzymatically produced mixtures with its epimer d-fructose. First, model parameters were determined using the inverse method and experimentally validated on a 2-2-2-2 lab-scale SMB plant. The obtained experimental purities (PUs) were in excellent agreement with the simulated data derived from a transport-dispersive true-moving bed model demonstrating the feasibility of the proposed design. In the second part the performance of the separation was investigated in a multi-objective optimization study addressing the cost-contributing performance parameters productivity (PR) and desorbent requirement (DR) as a function of temperature. While rare sugar SMB operation under conditions of low desorbent consumption was found to be widely unaffected by temperature, SMB operation focusing on increased PR significantly benefited from high temperatures, with possible productivities increasing from 3.4kg(Lday)(-1) at 20°C to 5kg(Lday)(-1) at 70°C, indicating that decreased selectivity at higher temperatures could be fully compensated for by the higher mass transfer rates, as they translate into reduced switch times and hence higher PR. A DR/PR Pareto optimization suggested a similar but even more pronounced trend also under relaxed PU requirements, with the PR increasing from 4.3kg(Lday)(-1) to a maximum of 7.8kg(Lday)(-1) for SMB operation at 50°C when the PU of the non-product stream was reduced from 99.5% to 90%. Based on the in silico optimization results experimental SMB runs were performed yielding considerable PRs of 1.9 (30°C), 2.4 (50°C) and 2.6kg(Lday)(-1) (70°C) with rather low DR (27L per kg of rare sugar produced) on a lab-scale SMB installation.

Monoacryloyl esters of carbohydrates: synthesis, polymerization and application in ceramic technology.

The article presents the interdisciplinary research among organic synthesis, chemistry of polymers and ceramic technology. It presents the synthesis of monoacryloyl esters of fructose and glucose that is 1-O-acryloyl-D-fructose and 3-O-acryloyl-D-glucose, conditions of their polymerization and application in shaping of advanced ceramic powders by the so called gelcasting method. The paper presents the influence of carbohydrate esters on the viscosity of Al2O3 suspensions and microstructure of final ceramic samples. The results showed that synthesized esters of saccharides can play the role of organic monomers able to polymerize in situ and self-cross-linking compounds in gelcasting. The paper presents the proposed structure of polymeric network which is formed from acryloyl ester of glucose during gelcasting process. The paper describes rheological behaviour of slurries composed of synthesized substances and A2O3 powders, wetting angles of alumina substrate by synthesized compounds, differences in glass transition temperatures of polymers and the microstructure of obtained final ceramic samples.

Immobilization of inulinase on concanavalin A-attached super macroporous cryogel for production of high-fructose syrup.

In this study, concanavalin A (Con A)-attached poly(ethylene glycol dimethacrylate) [poly(EGDMA)] cryogels were used for immobilization of Aspergillus niger inulinase. For this purposes, the monolithic cryogel column was prepared by radical cryocopolymerization of EGDMA as a monomer and N,N'-methylene bisacrylamide as a crosslinker. Then, Con A was attached by covalent binding onto amino-activated poly(EGDMA) cryogel via glutaraldehyde activation. Characterization of cryogels was performed by FTIR, EDX, and SEM studies. Poly(EGDMA) cryogels were highly porous and pore size was found to be approximately 50-100 µm. Con A-attached poly(EGDMA) cryogels was used in the adsorption of inulinase from aqueous solutions. Adsorption of inulinase on the Con A-attached poly(EGDMA) cryogel was performed in continuous system and the effects of pH, inulinase concentration, and flow rate on adsorption were investigated. The maximum amount of inulinase adsorption was calculated to be 27.85 mg/g cryogel at 1.0 mg/mL inulinase concentration and in acetate buffer at pH 4.0. Immobilized inulinase was effectively used in continuous preparation of high-fructose syrup. Inulin was converted to fructose in a continuous system and released fructose concentration was found to be 0.23 mg/mL at the end of 5 min of hydrolysis. High-fructose content of the syrup was demonstrated by thin layer chromatography.

Efficient isomerization of glucose to fructose over zeolites in consecutive reactions in alcohol and aqueous media.

Isomerization reactions of glucose were catalyzed by different types of commercial zeolites in methanol and water in two reaction steps. The most active catalyst was zeolite Y, which was found to be more active than the zeolites beta, ZSM-5, and mordenite. The novel reaction pathway involves glucose isomerization to fructose and subsequent reaction with methanol to form methyl fructoside (step 1), followed by hydrolysis to re-form fructose after water addition (step 2). NMR analysis with (13)C-labeled sugars confirmed this reaction pathway. Conversion of glucose for 1 h at 120 °C with H-USY (Si/Al = 6) gave a remarkable 55% yield of fructose after the second reaction step. A main advantage of applying alcohol media and a catalyst that combines Brønsted and Lewis acid sites is that glucose is isomerized to fructose at low temperatures, while direct conversion to industrially important chemicals like alkyl levulinates is viable at higher temperatures.

Optimization of lipase-catalyzed synthesis of fructose stearate using response surface methodology.

In this study, immobilized lipase-catalyzed esterification reaction between fructose and stearic acid was examined for the synthesis of a useful compound, fructose stearate, using response surface methodology. The increase of water content in the reaction medium was the negative effect while the increase in initial stearic acid/fructose molar ratio was the greatest positive effect on the yield. The highest fructose stearate yield was obtained as 65% in tert-butanol. The product yield was enhanced in 1-butyl-3-methylimidazolium trifluoromethanesulfonate obtained as 74% under the optimized conditions. The spectroscopic and elemental analysis methods showed that the esterification reaction is regioselective and the product is fructose monostearate.

Dynamic stereochemistry of Topiramate (anticonvulsant drug) in solution: theoretical approaches and experimental validation.

Topiramate, an antiepileptic drug, was synthesized with an improved protocol and identified by (1)H NMR, (13)C NMR, (1)H-(1)H COSY, HMQC and HMBC spectrum. In parallel, density functional theory (DFT) using B3LYP functional and split-valance 6-311++G** basis set has been used to optimize the structures and conformers of Topiramate. Also experimental and theoretical methods have been used to correlate the dependencies of (1)J and (2)J involving (1)H and (13)C on the C1-C2 (ω) and C1-O1 (θ) torsion angles in the glycosidic part of Topiramate. New Karplus equations are proposed to assist in the structural interpretation of these couplings. Importantly, due to the sensitivity of some couplings, most notably (2)J(H1R,H1S), (2)J(C2,H1R) and (2)J(C2,H1S) values depend on both C-C (ω) and C-O (θ) torsion angles. Analyses of experimental coupling constants for protons on the pyranose ring of Topiramate indicate a twist boat structure for Topiramate in solution. In all calculations solvent effects were considered using a polarized continuum model (PCM).

Microwave-assisted synthesis of prebiotic di-D-fructose dianhydride-enriched caramels.

The synthesis of prebiotic caramels involving the use of microwaves as the activating/heating source has been achieved. The yields in di-fructose dianhydrides (DFAs) in caramels were measured. The aim of this study was twofold: first to check the feasibility of the process, and second to determine the conditions to obtain an optimum response with microwave heating. The study showed that it was possible to obtain a yield of almost 50% of DFAs in a reaction time that was 10 times shorter than a previous study; i.e. 5-10 min for microwave activation compared to 60-120 min for conventional heating. It was shown that the radiation time and the radiation power were linked. The simultaneous determination of the values of these two factors was therefore necessary to obtain significant yields. This technique demonstrates the advantage of activation for mixtures such as caramels.

Enzymatic synthesis of D-sorbose and D-psicose with aldolase RhaD: effect of acceptor configuration on enzyme stereoselectivity.

It was previously reported that DHAP-dependent aldolase RhaD selectively chooses L-glyceraldehyde from racemic glyceraldehyde to produce l-fructose exclusively. Contrastingly, we discovered that D-glyceraldehyde is also tolerated as an acceptor and the stereoselectivity of the enzyme is lost in the corresponding aldol addition. Furthermore, we applied this property to efficiently synthesize two rare sugars D-sorbose and D-psicose.

Radiopharmacological evaluation of 6-deoxy-6-[18F]fluoro-D-fructose as a radiotracer for PET imaging of GLUT5 in breast cancer.

INTRODUCTION: Several clinical studies have shown low or no expression of GLUT1 in breast cancer patients, which may account for the low clinical specificity and sensitivity of 2-deoxy-2-[(18)F]fluoro-D-glucose ([(18)F]FDG) used in positron emission tomography (PET). Therefore, it has been proposed that other tumor characteristics such as the high expression of GLUT2 and GLUT5 in many breast tumors could be used to develop alternative strategies to detect breast cancer. Here we have studied the in vitro and in vivo radiopharmacological profile of 6-deoxy-6-[(18)F]fluoro-D-fructose (6-[(18)F]FDF) as a potential PET radiotracer to image GLUT5 expression in breast cancers. METHODS: Uptake of 6-[(18)F]FDF was studied in murine EMT-6 and human MCF-7 breast cancer cells over 60 min and compared to [(18)F]FDG. Biodistribution of 6-[(18)F]FDF was determined in BALB/c mice. Tumor uptake was studied with dynamic small animal PET in EMT-6 tumor-bearing BALB/c mice and human xenograft MCF-7 tumor-bearing NIH-III mice in comparison to [(18)F]FDG. 6-[(18)F]FDF metabolism was investigated in mouse blood and urine. RESULTS: 6-[(18)F]FDF is taken up by EMT-6 and MCF-7 breast tumor cells independent of extracellular glucose levels but dependent on the extracellular concentration of fructose. After 60 min, 30±4% (n=9) and 12±1% (n=7) ID/mg protein 6-[(18)F]FDF was found in EMT-6 and MCF-7 cells, respectively. 6-deoxy-6-fluoro-d-fructose had a 10-fold higher potency than fructose to inhibit 6-[(18)F]FDF uptake into EMT-6 cells. Biodistribution in normal mice revealed radioactivity uptake in bone and brain. Radioactivity was accumulated in EMT-6 tumors reaching 3.65±0.30% ID/g (n=3) at 5 min post injection and decreasing to 1.75±0.03% ID/g (n=3) at 120 min post injection. Dynamic small animal PET showed significantly lower radioactivity uptake after 15 min post injection in MCF-7 tumors [standard uptake value (SUV)=0.76±0.05; n=3] compared to EMT-6 tumors (SUV=1.23±0.09; n=3). Interestingly, [(18)F]FDG uptake was significantly different in MCF-7 tumors (SUV(15 min) 0.74±0.12 to SUV(120 min) 0.80±0.15; n=3) versus EMT-6 tumors (SUV(15 min) 1.01±0.33 to SUV(120 min) 1.80±0.25; n=3). 6-[(18)F]FDF was shown to be a substrate for recombinant human ketohexokinase, and it was metabolized rapidly in vivo. CONCLUSION: Based on the GLUT5 specific transport and phosphorylation by ketohexokinase, 6-[(18)F]FDF may represent a novel radiotracer for PET imaging of GLUT5 and ketohexokinase-expressing tumors.

Maximization of fructose esters synthesis by response surface methodology.

Enzymatic synthesis of fructose fatty acid ester was performed in organic solvent media, using a purified lipase from Candida antartica B immobilized in acrylic resin. Response surface methodology with a central composite rotatable design based on five levels was implemented to optimize three experimental operating conditions (temperature, agitation and reaction time). A statistical significant cubic model was established. Temperature and reaction time were found to be the most significant parameters. The optimum operational conditions for maximizing the synthesis of fructose esters were 57.1°C, 100 rpm and 37.8 h. The model was validated in the identified optimal conditions to check its adequacy and accuracy, and an experimental esterification percentage of 88.4% (±0.3%) was obtained. These results showed that an improvement of the enzymatic synthesis of fructose esters was obtained under the optimized conditions.

Sugar-based enantiomeric and conformationally constrained pyrrolo[2,1-c][1,4]-benzodiazepines as potential GABAA ligands.

Synthesis of a library of pyrrolo[2,1-c][1,4]-benzodiazepines derived from spiro bicyclic D- or L-proline analogues containing a D- or L-fructose moiety was developed. The L-fructose moiety was obtained by using a new synthetic pathway starting from L-arabinose through a six steps synthesis in 18% overall yield. Molecular modeling calculations and DNMR studies showed that D- and L-fructose-based pyrrolobenzodiazepines exhibit a rigid (P)- and (M)-helical conformation, respectively, in which the C-11a substituent was always pseudoequatorial. Additionally, pyrrolobenzodiazepines functionalized with a chloride, bromide, nitro, or amino group in the benzene ring, with or without N-methylation and with or without protection of sugar alcohol groups, allowed a relationship between the molecular structure and biological activity to be established. The conformation of the diazepam ring was not the sole key player influencing binding affinities, and the sugar moiety can in some cases increase the binding activity, possibly by participating in the binding event. Finally, these compounds have increased the understanding of the differential recognition of (M)-/(P)-helical benzodiazepines on GABA(A) receptor.