RESUMEN
We measured the levels of bacterial endotoxins in the bulk vaccine product (BVP) and finished vaccine QazCovid-in® and evaluated the effect of aluminum hydroxide (adjuvant) on the results of LAL test and pyrogenicity of samples in vivo (in rabbits receiving intravenous injection into the marginal ear vein). Administration of BVP with LPS resulted in a dose-dependent increase in body temperature in rabbits similar to that caused by LPS alone, which suggests that aluminum hydroxide in the vaccine did not affect the pyrogenic response in rabbits. Moreover, the LAL test showed that the aluminum hydroxide did not hinder LPS activity after serial dilution of samples.
Asunto(s)
COVID-19 , Vacunas , Animales , Conejos , Lipopolisacáridos , Hidróxido de Aluminio/análisis , Kazajstán , COVID-19/prevención & control , EndotoxinasRESUMEN
Oil emulsified in water is one of the most difficult mixtures to treat due to the good stability of emulsions, so there is a growing demand for more efficient methods for separating immiscible oil/water mixtures. In this context, the focus of this study was to obtain an adsorbent for the selective treatment of a simulated oily wastewater. To this aim, a modified hydrotalcite sample with hydrophobic and magnetic characteristics was prepared and characterized. Initially, the effect of sodium dodecyl sulfate (SDS) amount on the adsorbent characteristics was evaluated (266-800 mgSDS g-1LDH). The hydrophobic hydrotalcite (LDH-SDS) containing 533 mgSDS g-1LDH (LDH-SDS2) presented a higher interlayer space where the surfactant molecules were arranged perpendicular to the lamellae, allowing better access to the hydrotalcite pores and facilitating the selective adsorption of oil compounds. Moreover, the synergistic association of hydrophobic properties with super-wetting and effective adhesion oil to Fe3O4 favoured the selective adsorption of the simulated oily wastewater onto the hydrophobic and magnetic hydrotalcite (LDH-MSDS), facilitating the post-treatment separation. The kinetic analysis demonstrated that the adsorption equilibrium was attained in 120â min and the pseudo-second order model was the most suitable for predicting the removal of total organic carbon (TOC) from the simulated oily wastewater. The Langmuir model described very well the equilibrium experimental data, with a maximum adsorption capacity for TOC removal using LDH-MSDS of 659.9â mg g-1. Therefore, the modified hydrotalcite prepared in this study showed intrinsic characteristics that make it a promising adsorbent for the selective treatment of oily wastewaters.
Asunto(s)
Aguas Residuales , Contaminantes Químicos del Agua , Cinética , Hidróxido de Aluminio/análisis , Aceites , Adsorción , Fenómenos Magnéticos , Contaminantes Químicos del Agua/químicaRESUMEN
In this paper, a flexible and efficient nano-reinforced polymer inclusion membrane (PIM) was fabricated and used for cyanide (CN-) extraction from water samples. Aliquat 336 (a liquid anion exchanger) was embedded in poly(vinyl chloride) (PVC) support as the extractant. Mg-Al-CO3 layered double hydroxide (LDH) with high surface area and anion exchange ability was applied to promote the extraction efficiency of PIM. A PIM comprising 56% PVC, 40% Aliquat 336, and 4% Mg-Al-CO3 LDH showed the best extraction efficiency. A single beam ultraviolet-visible spectrophotometer was used for the detection of cyanide. Surface morphology of the PIM was studied by field emission scanning electron microscopy. The experimental parameters influencing the extraction process were investigated and optimized. The intra- and inter-day relative standard deviations at two different concentrations were in the range of 2.8-7.6%. The dynamic range of the method was in the range of 5-500 µg L-1, and the detection limit was 1.4 µg L-1. The LDH reinforced PIM showed proper characteristics for the extraction of cyanide from real water and wastewater samples with recoveries between 82 and 115%.
Asunto(s)
Hidróxido de Aluminio/análisis , Cianuros/análisis , Hidróxidos/análisis , Magnesio/análisis , Hidróxido de Aluminio/química , Cianuros/química , Hidróxidos/química , Límite de Detección , Magnesio/química , Microscopía Electrónica de Rastreo , Polímeros , Aguas Residuales , AguaRESUMEN
Kinetics analyses of sorption and desorption provide important insight into reaction mechanisms occurring at the mineral-water interface. They are also needed to determine when equilibrium is achieved, identify intermediate chemical species, and inform models describing neptunium mobility. Neptunium sorption to and desorption from four different aluminum (hydr)oxides - bayerite (α-Al(OH)3), gibbsite (γ-Al(OH)3), corundum (α-Al2O3), and γ-alumina (γ-Al2O3) - were investigated as a function of mineral concentration (5 - 170â¯m2â¯L-1), neptunium concentration (10-9 - 10-7â¯M), and pH (5.5 - 10.5). Neptunium sorption was characterized by a two-step reaction with an initial fast sorption step occurring within minutes followed by a slower equilibrium process, which was attributed to initial sorption of neptunium to a small number of strong sorption sites followed by sorption of neptunium to a larger number of weak sorption sites. The kinetics data were modeled using the linear and non-linear forms of the pseudo-first and pseudo-second order rate equations and the goodness of fit parameters were compared. Non-linear pseudo-second order rate constants described neptunium sorption to aluminum (hydr)oxides most accurately and were used to determine the reaction orders with respect to mineral concentration and [H+]. Neptunium desorption experiments demonstrated that the desorption mechanism changed as a function of pH and that the forward and reverse reactions were not equivalent. At pHâ¯≥â¯7.5, desorption reached steady-state within an hour and was accurately described by the non-linear pseudo-second order rate equations. A desorption plateau was observed at pH 5.5 that could not be described by either pseudo-first or -second order kinetics, suggesting the possibility of a multi-step desorption reaction. The comparatively slow desorption kinetics observed here suggests that sorbed neptunium could be slowly released back into the aqueous phase and act as a continuous source of contamination to the environment.
Asunto(s)
Hidróxido de Aluminio/análisis , Óxido de Aluminio/análisis , Minerales/análisis , Neptunio/química , Adsorción , Concentración de Iones de Hidrógeno , CinéticaRESUMEN
In this study, a series of polyaluminium chloride/papermaking sludge-based organic polymer (PAC-PSBF) composites with different PAC basicity and PAC/PSBF mass ratios were prepared from papermaking sludge. The basic properties of the aforementioned composites were characterized, and their flocculation efficiencies were studied in the disperse yellow (DY) and reactive blue (RB) dye removals. The results of the flocculation experiments demonstrated that PAC-PSBF composites performed better than PAC regardless of the PAC basicity or PAC/PSBF mass ratios. The composites with low PAC basicity were effective in DY and RB dye removals. PAC-PSBF composites with the same PAC basicity but higher PAC/PSBF mass ratios exerted more satisfactory color removals and floc properties in both DY and RB dye removals. PAC-PSBF composites were more pH-independent than PAC, and the excellent flocculation efficiencies of the composites was achieved at pH 4.0 to 8.0 in DY/RB dye removals. In brief, desirable flocculation efficiencies of the PAC-PSBF composites were obtained when PAC and PSBF were appropriately combined together.
Asunto(s)
Hidróxido de Aluminio/análisis , Eliminación de Residuos Líquidos/métodos , Color , Colorantes/química , Floculación , Polímeros/química , Aguas del Alcantarillado/química , Purificación del Agua/métodosRESUMEN
Nitrate-intercalated MgAl layered double hydroxide (LDH) was successfully delaminated in water by a facile and effective method upon reflux at 120⯰C for 24â¯h followed by sonication at 40⯰C for 5â¯h. This process is environmentally friendly since water is the only solvent used. The delaminated nanosheets were characterized by microscopic, spectroscopic, and particle size analyses. The delamination process successfully produced octahedron-shaped single-layer nanosheets 50-150â¯nm in size. X-ray photoelectron spectroscopy (XPS) data confirmed that the surface elements and their chemical status are consistent with the basic layer of MgAl LDH. The delaminated nanosheets displayed higher adsorption capacity for removing heavy metals from waste water than the original powdered LDH. After treating the waste water, a sharp and intense peak in the X-ray powder diffraction (XRD) pattern of the precipitate confirms the restacking of the LDH nanosheets.
Asunto(s)
Hidróxido de Aluminio/química , Restauración y Remediación Ambiental/métodos , Hidróxido de Magnesio/química , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Adsorción , Hidróxido de Aluminio/análisis , Sustancias Intercalantes/química , Hidróxido de Magnesio/análisis , Metales Pesados/análisis , Nanoestructuras/química , Nitratos/análisis , Espectroscopía de Fotoelectrones , Sonicación/métodos , Aguas Residuales/análisis , Contaminantes Químicos del Agua/análisis , Difracción de Rayos XRESUMEN
Aluminum chlorohydrates (ACH) are the active ingredients used in most antiperspirant products. ACH is a water soluble aluminum complex which contains several oligomeric polycations of aluminum with degrees of polymerization up to Al13 or Al30. The characterization and quantification of ACH oligo-cations remain a challenging issue of primary interest for developing structure/antiperspirant activity correlations, and for controlling the ACH ingredients. In this work, highly repeatable capillary electrophoresis (CE) separation of Al3+, Al13 and Al30 oligomers contained in ACH samples was obtained at pH 4.8, owing to a careful choice of the background electrolyte counter-ion and chromophore, capillary I.D. and capillary coating. This is the first reported separation of Al13 and Al30 oligomers in conditions that are compatible with the aluminum speciation in ACH solution or in conditions of antiperspirant application/formulation. Al13 and Al30 effective charge numbers were also determined from the sensitivity of detection in indirect UV detection mode. The relative mass proportion of Al13 compared to Al13+Al30 could be determined in different aluminum chlorohydrate samples. Due to its simplicity, repeatability/reproducibility, minimal sample preparation and mild analytical conditions, CE appears to be a promising analytical separation technique for the characterization of ACH materials and for the study of structure/antiperspirant activity correlations.
Asunto(s)
Hidróxido de Aluminio/análisis , Electroforesis Capilar , Hidróxido de Aluminio/química , Cationes/química , Reproducibilidad de los Resultados , Espectrofotometría UltravioletaRESUMEN
Fracturing waste liquid (FWL) is generated during shale gas extraction and contains high concentrations of suspended solid, salinity and organic compounds, which needs proper management to prevent excessive environmental disruption. Biological treatment of the FWL was attempted in this study using a membrane-coupled internal circulation aerobic biological fluidized bed (MC-ICABFB) after being treated by coagulation. The results showed that poly aluminum chloride (PAC) of 30â g/L, polyacrylamide (PAM) of 20â mg/L and pH of 7.0 were suitable choices for coagulation. The pretreated FWL mixed with synthetic wastewater at different ratios were used as the influent wastewater for the reactor. The MC-ICABFB had relatively good performance on COD and NH4+-N removal and the main residual organic compound in the effluent was phthalates according to the analysis of GC-MC profiles. In addition, a suitable pretreatment process for the FWL to facilitate biological treatment of the wastewater needs further research.
Asunto(s)
Reactores Biológicos , Fracking Hidráulico , Eliminación de Residuos Líquidos , Aguas Residuales/química , Resinas Acrílicas/análisis , Aerobiosis , Hidróxido de Aluminio/análisis , Concentración de Iones de HidrógenoRESUMEN
This is a safety assessment of alumina and aluminum hydroxide as used in cosmetics. Alumina functions as an abrasive, absorbent, anticaking agent, bulking agent, and opacifying agent. Aluminum hydroxide functions as a buffering agent, corrosion inhibitor, and pH adjuster. The Food and Drug Administration (FDA) evaluated the safe use of alumina in several medical devices and aluminum hydroxide in over-the-counter drugs, which included a review of human and animal safety data. The Cosmetic Ingredient Review (CIR) Expert Panel considered the FDA evaluations as part of the basis for determining the safety of these ingredients as used in cosmetics. Alumina used in cosmetics is essentially the same as that used in medical devices. This safety assessment does not include metallic or elemental aluminum as a cosmetic ingredient. The CIR Expert Panel concluded that alumina and aluminum hydroxide are safe in the present practices of use and concentration described in this safety assessment.
Asunto(s)
Hidróxido de Aluminio/toxicidad , Óxido de Aluminio/toxicidad , Seguridad de Productos para el Consumidor , Cosméticos/normas , Hidróxido de Aluminio/análisis , Hidróxido de Aluminio/farmacocinética , Óxido de Aluminio/análisis , Óxido de Aluminio/farmacocinética , Animales , Seguridad de Productos para el Consumidor/legislación & jurisprudencia , Cosméticos/química , Equipos y Suministros/normas , Regulación Gubernamental , Humanos , Estructura Molecular , Pruebas de Toxicidad/métodos , Toxicocinética , Estados Unidos , United States Food and Drug AdministrationRESUMEN
We report the synthesis of magnesium-aluminium layered double hydroxide (LDH) using a reaction-diffusion framework (RDF) that exploits the multiscale coupling of molecular diffusion with chemical reactions, nucleation and growth of crystals. In an RDF, the hydroxide anions are allowed to diffuse into an organic gel matrix containing the salt mixture needed for the precipitation of the LDH. The chemical structure and composition of the synthesized magnesium-aluminium LDHs are determined using powder X-ray diffraction (PXRD), thermo-gravimetric analysis, differential scanning calorimetry, solid-state nuclear magnetic resonance (SSNMR), Fourier transform infrared and energy dispersive X-ray spectroscopy. This novel technique also allows the investigation of the mechanism of intercalation of some fluorescent probes, such as the neutral three-dimensional rhodamine B (RhB) and the negatively charged two-dimensional 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS), using in situ steady-state fluorescence spectroscopy. The incorporation of these organic dyes inside the interlayer region of the LDH is confirmed via fluorescence microscopy, solid-state lifetime, SSNMR and PXRD. The activation energies of intercalation of the corresponding molecules (RhB and HPTS) are computed and exhibit dependence on the geometry of the involved probe (two or three dimensions), the charge of the fluorescent molecule (anionic, cationic or neutral) and the cationic ratio of the corresponding LDH.This article is part of the themed issue 'Multiscale modelling at the physics-chemistry-biology interface'.
Asunto(s)
Hidróxido de Aluminio/química , Colorantes Fluorescentes/química , Sustancias Intercalantes/química , Hidróxido de Magnesio/química , Modelos Químicos , Espectrometría de Fluorescencia/métodos , Hidróxido de Aluminio/análisis , Simulación por Computador , Difusión , Hidróxidos/química , Sustancias Intercalantes/análisis , Cinética , Hidróxido de Magnesio/análisis , Ensayo de Materiales/métodos , Modelos MolecularesRESUMEN
This study investigated the treatment performance for aging leachate containing refractory organic pollutants by TiO2-organobentonite photocatalyst combined with polyaluminum chloride (PAC) coagulant. TiO2 was immobilized on organobentonite granules as a supporter modified by cetyltrimethylammonium chloride (CTAC). The prepared catalysts were characterized by ESEM, FTIR, and XRD analysis, which showed that TiO2-organobentonite catalyst had uniform coating of TiO2 on support. Chemical oxygen demand (COD) and NH3-N removal rates by combination of TiO2-CTAC2.0 photocatalysis and PAC coagulation were evaluated, optimized, and compared to that by either treatment alone, with respect to TiO2-CTAC2.0 dose, photocatalytic contact time, pH, and PAC dose. Furthermore, higher removal rates (COD 80 %; NH3-N 46 %) were achieved by response surface methodology (RSM) when TiO2-CTAC2.0 photocatalysis was followed by PAC coagulation at optimized conditions. The optimized experimental conditions were TiO2-CTAC2.0 dosage of 5.09 g/L, at pH 5.53, photocatalytic contact time for 180 min, and PAC dosage of 1062 mg/L.
Asunto(s)
Compuestos de Bis-Trimetilamonio/química , Eliminación de Residuos/métodos , Titanio/química , Contaminantes Químicos del Agua/química , Hidróxido de Aluminio/análisis , Bentonita/química , Análisis de la Demanda Biológica de Oxígeno , Compuestos de Bis-Trimetilamonio/análisis , Catálisis , Cetrimonio , Compuestos de Cetrimonio , Coagulantes , Contaminantes Químicos del Agua/análisisRESUMEN
OBJECTIVE: To establish a new rapid method for determination of 7elements( arsenic, selenium, mercury, cadmium, chromium, lead and silver) in two kinds of chemical water treatment agents polyaluminium chloride and iron sulfate by inductively coupled plasma mass spectrometry( ICP-MS). METHODS: Pure water was added to two kinds of chemical water treatment agents. Nitric acid was added to the solution, and the solution was incubated by water bath for 1 h. Matrix effects was eliminated by the employment of Sc, Y, In and Bi as internal standards. The concentrations of 7 elements were determined. RESULTS: The linear ranges for 7 elements were between 0 and 50. 0µg/L with a correlation coefficient for each element of higher than 0. 999. The detection limits were between 0. 05 and 0. 96 µg/L, the recoveries were between 90. 1% and106. 4%, the relative standard deviations were between 1. 6% and 5. 7%. The concentration of arsenic, selenium, and lead in certain samples of the 40 samples tested did not meet the health standards. The large majority of the unqualified samples were caused by the concentration of element lead. CONCLUSION: This method is simple, rapid, accurate and sensitive. It is very suitable for the determination of multi-elements inchemical water treatment agents.
Asunto(s)
Hidróxido de Aluminio/química , Hierro/química , Espectrometría de Masas/métodos , Análisis Espectral/métodos , Sulfatos/química , Hidróxido de Aluminio/análisis , Humanos , Hierro/análisis , Sulfatos/análisisRESUMEN
Use of ribonucleic acid (RNA) interference to regulate protein expression has become an important research topic and gene therapy tool, and therefore, finding suitable vehicles for delivery of small RNAs into cells is of crucial importance. Layered double metal hydroxides such as hydrotalcite (HT) have shown great promise as nonviral vectors for transport of deoxyribose nucleic acid (DNA), proteins, and drugs into cells, but the adsorption of RNAs to these materials has been little explored. In this study, the binding of small RNAs with different lengths and levels of secondary structure to HT nanoparticles has been analyzed and compared to results obtained with small DNAs in concurrent experiments. Initial experiments established the spectrophotometric properties of HT in aqueous solutions and determined that HT particles could be readily sedimented with near 100% efficiencies. Use of RNA+HT cosedimentation experiments as well as electrophoretic mobility shift assays demonstrated strong adsorption of RNA 25mers to HT, with twofold greater binding of single-stranded RNAs relative to double-stranded molecules. Strong affinities were also observed with ssRNA and dsRNA 54mers and with more complex transfer RNA molecules. Competition binding and RNA displacement experiments indicated that RNA-HT associations were strong and were only modestly affected by the presence of high concentrations of inorganic anions.
Asunto(s)
Adsorción , Hidróxido de Aluminio/análisis , Sistemas de Liberación de Medicamentos , Hidróxido de Magnesio/análisis , Nanopartículas/química , ARN/metabolismo , Transporte Biológico , ARN/químicaRESUMEN
Electrospray mass spectrometry has been reported as a novel technique for Al species identification, but to date, the working mechanism is not clear and no unanimous method exists for spectrum analysis of traditional Al salt flocculants, let alone for analysis of polyaluminum chloride (PAC) flocculants. Therefore, this paper introduces a novel theoretical calculation method to identify Al species from a mass spectrum, based on deducing changes in m/z (mass-to-charge ratio) and molecular formulas of oligomers in five typical PAC flocculants. The use of reference chemical species was specially proposed in the method to guarantee the uniqueness of the assigned species. The charge and mass reduction of the Al cluster was found to proceed by hydrolysis, gasification, and change of hydroxyl on the oxy bridge. The novel method was validated both qualitatively and quantitatively by comparing the results to those obtained with the (27)Al NMR spectrometry.
Asunto(s)
Hidróxido de Aluminio/análisis , Espectrometría de Masa por Ionización de Electrospray/métodos , Estudios de Factibilidad , Floculación , Hidrólisis , Espectroscopía de Resonancia Magnética , Espectrometría de MasasRESUMEN
Aluminum salts have a long history as safe and effective vaccine adjuvants. In addition, aluminum salts have high adsorptive capacities for vaccine antigens and adjuvant molecules, for example, Toll-like receptor 4 (TLR4) agonists. However, the physicochemical properties of aluminum salts make direct quantitation of adsorbed molecules challenging. Typical methods for quantifying adsorbed molecules require advanced instrumentation, extreme sample processing, often destroy the sample, or rely on an indirect measurement. A simple, direct, and quantitative method for analysis of adsorbed adjuvant molecules is needed. This report presents a method utilizing Fourier transform infrared spectroscopy with a ZnSe-attenuated total reflectance attachment to directly measure low levels (<30 µg/mL) of TLR4 agonists adsorbed on aluminum salts with minimal sample preparation.
Asunto(s)
Hidróxido de Aluminio/análisis , Glucósidos/análisis , Lípido A/análisis , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Receptor Toll-Like 4/agonistas , Adsorción , Hidróxido de Aluminio/metabolismo , Glucósidos/metabolismo , Lípido A/metabolismoRESUMEN
BACKGROUND: Infection by Helicobacter pylori is common and affects both genders at any age. The 13C-urea breath test is a widely used test for the diagnosis of this infection. However, multiple drugs used for the treatment of Helicobacter pylori infection symptoms have interactions with this breath test that generate false negative results. This observational study was to assess the potential interaction between almagate and the breath test. METHODS: Thirty subjects on almagate therapy who underwent a breath test were included. If the result was negative, almagate was withdrawn for a month and the breath test was then repeated. RESULTS: In general, 51.9 % of assessed subjects had a negative result after the first test, and 100 % of these also had a negative result after the second test. CONCLUSIONS: It was concluded that the use of almagate does not interfere in breath test results. These results provide a drug therapy option for the treatment of symptoms associated with Helicobacter pylori infection during the diagnostic process.
Asunto(s)
Hidróxido de Aluminio/uso terapéutico , Antiácidos/uso terapéutico , Pruebas Respiratorias/métodos , Carbonatos/uso terapéutico , Infecciones por Helicobacter/diagnóstico , Helicobacter pylori , Hidróxido de Magnesio/uso terapéutico , Adulto , Anciano , Hidróxido de Aluminio/análisis , Antiácidos/análisis , Carbonatos/análisis , Reacciones Falso Negativas , Femenino , Humanos , Hidróxido de Magnesio/análisis , Masculino , Persona de Mediana Edad , Reproducibilidad de los ResultadosRESUMEN
Raman and infrared spectra of two well-defined fluellite samples, Al2(PO4)F2(OH)·7H2O, from the Krásno near Horní Slavkov (Czech Republic) and Kapunda, South Australia (Australia) were studied and tentatively interpreted. Observed bands were assigned to the stretching and bending vibrations of phosphate tetrahedra, aluminum oxide/hydroxide/fluoride octahedra, water molecules and hydroxyl ions. Approximate O-Hâ â â O hydrogen bond lengths were inferred from the Raman and infrared spectra.
Asunto(s)
Minerales/química , Hidróxido de Aluminio/análisis , Óxido de Aluminio/análisis , Fluoruros/análisis , Fosfatos/análisis , Espectrofotometría Infrarroja , Espectrometría RamanRESUMEN
Current work aimed to develop and evaluate a transdermal delivery system of hydrogel patch for ferulic acid to treat skin damage induced by UV radiation. VISCOMATE(TM) NP700, dihydroxy aluminium aminoacetate, glycerine, tartaric acid were used in combination in different ratios to design the hydrogel patch. In vitro release rate was selected as an index to optimize the formulation. The formulated hydrogel patch was evaluated by several parameters like tacking strength, cohesive strength, peeling strength, residuals after peeling and drug content determination. The in vitro penetration was determined by Franz diffusion technology with hairless mouse skin as permeability media. Different kinetics models were employed to simulate the release and penetrate patterns of ferulic acid from patches in order to investigate the drug transport mechanism. The residual drugs in the patch and skin were determined after the penetration experiment. The optimized preparation was dihydroxy aluminium aminoacetate: NP700: glycerine: ferulic acid as a ratio of 0.02:0.4:1.5:1.25:0.25. The cumulative percentage of release was 60.4465±1.7679% for 24h, which results from a combination of diffusion effect and polymer erosion effect. For the barrier of stratum corneum, the cumulative penetrate rate was only 1.3156±0.3588% and the release mechanism turn out to be the effect of erosion of polymer surface. The residual drugs in the patch were 97.5949±1.4932%. The in vitro data revealed that it was easy for ferulic acid to release from the paste while difficult to permeate through the skin barrier, which resulted in most of drugs residued in the paste. Hence, further experiments will be necessary for finding the penetration enhancer in ferulic acid transdermal delivery.
Asunto(s)
Ácidos Cumáricos/administración & dosificación , Protectores contra Radiación , Hidróxido de Aluminio/análisis , Animales , Química Farmacéutica , Cromatografía Líquida de Alta Presión , Ácidos Cumáricos/farmacocinética , Sistemas de Liberación de Medicamentos , Residuos de Medicamentos/análisis , Excipientes , Glicerol/análisis , Glicina/análogos & derivados , Glicina/análisis , Hidrogeles , Técnicas In Vitro , Ratones , Ratones Pelados , Vehículos Farmacéuticos , Reproducibilidad de los Resultados , Absorción Cutánea , Espectrofotometría Ultravioleta , Tartratos/análisis , Parche Transdérmico , Rayos Ultravioleta , Agua/análisisRESUMEN
Hydrotalcite and its calcination product were used to treat pure water spiked with various concentrations of boron and geothermal water containing boron as a major undesirable element. The kinetics process of boron sorption by uncalcined hydrotalcite is controlled by the diffusion of boron from bulk solution to sorbent-solution boundary film and its exchange with interlayer chloride of hydrotalcite, whereas the removal rate of boron by calcined hydrotalcite rests with the restoration process of its layered structure. The results of isotherm sorption experiments reveal that calcined hydrotalcite generally has much stronger ability to lower solution boron concentration than uncalcined hydrotalcite. The combination of adsorption of boron on the residue of MgO-Al2O3 solid solution and intercalation of boron into the reconstructed hydrotalcite structure due to "structural memory effect" is the basic mechanism based on which the greater boron removal by calcined hydrotalcite was achieved. As 15 geothermal water samples were used to test the deboronation ability of calcined hydrotalcite at 65 °C, much lower boron removal efficiencies were observed. The competitive sorption of the other anions in geothermal water, such as HCO3-, SO4(2-), and F-, is the reason why calcined hydrotalcite could not remove boron from geothermal water as effectively as from pure boron solution. However, boron removal percents ranging from 89.3 to 99.0% could be obtained if 50 times of sorbent were added to the geothermal water samples. Calcined hydrotalcite is a good candidate for deboronation of geothermal water.
Asunto(s)
Hidróxido de Aluminio/química , Boro/química , Hidróxido de Magnesio/química , Contaminantes Químicos del Agua/química , Adsorción , Hidróxido de Aluminio/análisis , Boro/análisis , Cinética , Hidróxido de Magnesio/análisis , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodosRESUMEN
Sediment particulates can be ingested by benthic animals, and the bioavailability of associated metals strongly depends on their speciation in the sediments. Different sedimentary components have distinct physiochemical characteristics and result in different biological responses from animals. Therefore, the bioaccumulation of particle-bound trace metals may be different. In the present study, bioaccumulation of cadmium adsorbed on various (hydr)oxide minerals, that is, ferric hydroxide, aluminum hydroxide, and manganese dioxide, in the clam Meretrix meretrix Linnaeus was studied. The results showed that the accumulation rate of cadmium varied for different mineral-adsorbed cadmium. The bioaccumulation of metal (hydr)oxide-adsorbed cadmium in M. meretrix followed the order Cd-MnO2 > Cd-Al(OH)3 > Cd-Fe(OH)3 . The type of mineral determines both the assimilation efficiency and ingestion rate, and consequently controls the bioaccumulation of adsorbed cadmium.