Finite element analysis of the effect of tibial osteotomy on the stress of polyethylene liner in total knee arthroplasty.

AIM: To explore the effects of tibial osteotomy varus angle combined with posterior tibial slope (PTS) on the stress of polyethylene liner in total knee arthroplasty (TKA) by building finite element model (FEM). METHODS: Established the FEM of standard TKA with tibial osteotomy varus angle 0° to 9° were established and divided into 10 groups. Next, each group was created 10 FEMs with 0° to 9° PTS separately. Calculated the stress on polyethylene liner in each group in Abaqus. Finally, the relevancy between tibial osteotomy angle and polyethylene liner stress was statistically analyzed using multiple regression analysis. RESULTS: As the varus angle increased, the area of maximum stress gradually shifted medially on the polyethylene liner. As the PTS increases, the percentage of surface contact forces on the medial and lateral compartmental of the polyethylene liner gradually converge to the same. When the varus angle is between 0° and 3°, the maximum stress of the medial compartmental surfaces of polyethylene liner rises smoothly with the increase of the PTS. When the varus angle is between 4° and 9°, as the increase of the PTS, the maximum stress of polyethylene liner rises first and then falls, forming a trough at PTS 5° and then rises again. Compared to the PTS, the varus angle has a large effect on the maximum stress of the polyethylene liner (p < .001). CONCLUSION: When the varus angle is 0° to 3°, PTS 0° is recommended, which will result in a more equalized stress distribution of the polyethylene liner in TKA.

Reconstruction of Segmental Bone Defect in Canine Tibia Model Utilizing Bi-Phasic Scaffold: Pilot Study.

The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone scaffolds with seeded cells and/or growth factors to regulate osteogenesis and angiogenesis. However, these therapies face inherent issues related to immunogenicity, tumorigenesis, bioactivity, and off-the-shelf transplantation. The biogenic micro-environment created by implanted bone grafts plays a crucial role in initiating the bone regeneration cascade. To address this, a highly porous bi-phasic ceramic synthetic bone graft, composed of hydroxyapatite (HA) and alumina (Al), was developed. This graft was employed to repair critical segmental defects, involving the creation of a 2 cm segmental defect in a canine tibia. The assessment of bone regeneration within the synthetic bone graft post-healing was conducted using scintigraphy, micro-CT, histology, and dynamic histomorphometry. The technique yielded pore sizes in the range of 230-430 µm as primary pores, 40-70 µm as secondary inner microchannels, and 200-400 nm as tertiary submicron surface holes. These three components are designed to mimic trabecular bone networks and to provide body fluid adsorption, diffusion, a nutritional supply, communication around the cells, and cell anchorage. The overall porosity was measured at 82.61 ± 1.28%. Both micro-CT imaging and histological analysis provided substantial evidence of robust bone formation and the successful reunion of the critical defect. Furthermore, an histology revealed the presence of vascularization within the newly formed bone area, clearly demonstrating trabecular and cortical bone formation at the 8-week mark post-implantation.

Factors influencing the posterior cruciate ligament buckling phenomenon-a multiple linear regression analysis of bony and soft tissue structures of the knee joint.

PURPOSE: To determine whether posterior cruciate ligament (PCL) buckling (angular change) is associated with anterior cruciate ligament (ACL) status (intact or ruptured), meniscal bone angle (MBA), anterior tibial translation (ATT), body weight, femoral-tibial rotation (FTR), posterior tibial slope (PTS), PCL length and femoral-tibial distance (FTD) and to identify the factors that have the greatest influence. METHODS: All enrolled participants were scanned with a 3.0 T, 8-channel coil MRI system (Magnetom Verio; Siemens). Bone and soft tissue parameters were measured by MIMICS software for each subject and each measured parameter was correlated with PCL buckling phenomena. The correlated and statistically significant parameters were then analyzed by multiple linear regression to determine the magnitude of the effect of the different parameters on the PCL buckling phenomenon. RESULTS: A total of 116 subjects (50 ACL ruptured and 66 age, weight and height matched volunteers with uninjured knees) were enrolled. Among all measured parameters, there were 8 parameters that correlated with PCL angle (PCLA), of which ACL status had the strongest correlation with PCLA (r = - 0.67, p = < 0.001); and 7 parameters that correlated with PCL-posterior femoral cortex angle (PCL-PCA), of which ATT had the strongest correlation with PCL-PCA (r = 0.69, p = < 0.001). PCLIA was not significantly correlated with any of the measured parameters. Multiple linear regression analyses revealed four parameters can explain PCLA, of which ACL status had the strongest effect on PCLA (absolute value of standardized coefficient Beta was 0.508). Three parameters can explain PCL-PCA, of which ATT had the strongest effect on PCLIA (r = 0.69, p = < 0.001), ATT has the greatest effect on PCL-PCA (absolute value of normalized coefficient Beta is 0.523). CONCLUSIONS: PCLA may be a simple and easily reproducible and important supplement for the diagnosis of ACL injury; PCL-PCA is a simple and easily reproducible and important complementary tool for the detection of ATT. The use of PCLA is more recommended to aid in the diagnosis of ACL injury.

Spatial variations in the osteocyte lacuno-canalicular network density and analysis of the connectomic parameters.

Osteocyte lacuno-canalicular network (LCN) is comprised of micrometre-sized pores and submicrometric wide channels in bone. Accumulating evidence suggests multiple functions of this network in material transportation, mechanobiological signalling, mineral homeostasis and bone remodelling. Combining rhodamine staining and confocal laser scanning microscopy, the longitudinal cross-sections of six mouse tibiae were imaged, and the connectome of the network was quantified with a focus on the spatial heterogeneities of network density, connectivity and length of canaliculi. In-vivo loading and double calcein labelling on these tibiae allowed differentiating the newly formed bone from the pre-existing regions. The canalicular density of the murine cortical bone varied between 0.174 and 0.243 µm/µm3, and therefore is three times larger than the corresponding value for human femoral midshaft osteons. The spatial heterogeneity of the network was found distinctly more pronounced across the cortex than along the cortex. We found that in regions with a dense network, the LCN conserves its largely tree-like character, but increases the density by including shorter canaliculi. The current study on healthy mice should serve as a motivating starting point to study the connectome of genetically modified mice, including models of bone diseases and of reduced mechanoresponse.

Impact of infrasound exposure and streptozotocin-induced glucose intolerance on bone composition in Wistar rats.

The elemental composition of chemical elements can vary between healthy and diseased tissues, providing essential insights into metabolic processes in physiological and diseased states. This study aimed to evaluate the calcium (Ca) and phosphorus (P) levels in the bones of rats with/without streptozotocin-induced diabetes and/or exposure to infrasound. X-ray fluorescence spectroscopy was used to determine the concentrations of Ca and P in Wistar rat tibiae samples.The results showed a significant decrease in bone P concentration in streptozotocin-induced diabetic rats compared to untreated animals. Similarly, the Ca/P ratio was higher in the streptozotocin-induced diabetic group. No significant differences were observed in bone Ca concentration between the studied groups or between animals exposed and not exposed to infrasound.Moreover, streptozotocin-induced diabetic rats had lower bone P concentration but unaltered bone Ca concentration compared to untreated rats. Infrasound exposure did not impact bone Ca or P levels. The reduced bone P concentration may be associated with an increased risk of bone fractures in diabetes.

Total knee arthroplasty following lateral closing-wedge high tibial osteotomy versus primary total knee arthroplasty: a propensity score matching study.

BACKGROUND: The disparity in patient-reported outcomes between total knee arthroplasty (TKA) following high tibial osteotomy (HTO) and primary TKA has yet to be fully comprehended. This study aims to compare the patient-reported outcomes, radiological parameters and complication rates between TKA following HTO and primary TKA. METHODS: Sixty-five patients who underwent TKA following lateral closing-wedge HTO were compared to a matched group of primary TKA at postoperative 6-months and 1-year. Between-group confounders of age, gender, smoking status, Body Mass index, preoperative Numeric Rating Scale (NRS) pain in rest, Knee injury and Osteoarthritis Outcome Score-Physical function Shortform (KOOS-PS), EuroQol five-dimensional (EQ-5D) overall health score, and Oxford Knee Score (OKS) were balanced by propensity score matching. Patient-reported outcome measures were NRS pain in rest, KOOS-PS, EQ-5D overall health score, and OKS. Radiological parameters were femorotibial angle, medial proximal tibial angle, anatomical lateral distal femoral angle, posterior tibial slope, and patellar height assessed by Insall-Salvati ratio. The complication rates of TKA were compared between the two groups. The HTO survival time, the choice of staple removal before or during TKA in patients who underwent TKA following HTO patients, and the rate of patellar resurfacing were assessed. The p value < 0.0125 indicates statistical significance after Bonferroni correction. RESULTS: After propensity score matching, no significant between-group differences in the patient-reported outcome measures, radiographical parameters and complication rates were found (p > 0.0125). In the TKA following HTO group, with an average HTO survival time of 8.7 years, staples were removed before TKA in 46 patients (71%) and during TKA in 19 patients, and 11 cases (17%) had patella resurfacing. In the primary TKA group, 15 cases (23%) had patella resurfacing. CONCLUSION: The short-term assessment of TKA following HTO indicates outcomes similar to primary TKA. A previous HTO does not impact the early results of subsequent TKA, suggesting that the previous HTO has minimal influence on TKA outcomes. LEVEL OF EVIDENCE: III, cohort study.

Gerdy's tubercle as a novel anatomical landmark for the proximal tibial cut in total knee arthroplasty.

OBJECTIVES: This study aimed to explore the use of Gerdy's tubercle (GT) as an innovative and dependable anatomical landmark for the proximal tibial cut in total knee arthroplasty (TKA) in cases with extensive knee degeneration. MATERIALS AND METHODS: One hundred dry tibia bones and 10 formalin-fixed cadaveric knee specimens of both sexes were examined. A Zimmer NexGen tibial cutting guide and a Mitutoyo digital caliper were utilized to align the guide with the tibia's mechanical axis. The procedure was replicated on cadaver knees using a standardized medial parapatellar arthrotomy approach. Measurements included the distance from GT superior border to the resection line and the length of the tibia. A radiological study involving magnetic resonance imaging examinations of 48 patients, which were evaluated focusing on the upper border of GT and the least degenerated segment of the posterolateral part of the lateral tibial condyle, was conducted. RESULTS: Anatomical measurements of GT and proximal tibial areas in 110 specimens showed slight but consistent variations with cadaver measurements. Magnetic resonance imaging analysis of 48 patients revealed notable sex differences in the distance between the superior border of GT and the tibia's posterolateral surface. There was also a significant negative correlation between the distance from GT to the posterolateral corner and cartilage thickness. CONCLUSION: Proper alignment in TKA is crucial for success, but identifying an extra-articular landmark for horizontal tibial resection remains challenging, particularly in severely arthritic knees. This study introduces GT as a novel anatomical landmark for TKA, offering a more reliable reference for achieving desired joint levels in knees with significant degenerative changes.

Impact of postoperative femorotibial axis on functional outcomes in unicompartmental knee arthroplasty.

OBJECTIVES: This study aimed to compare the functional outcomes of patients undergoing fixed-bearing medial unicompartmental knee arthroplasty (UKA) classified as either varus or neutral based on their postoperative femorotibial angle (FTA), with the goal of evaluating the impact of FTA on functional results. PATIENTS AND METHODS: A total of 38 knees of 35 patients (27 females, 8 males; mean age: 63.6±7.1 years; range, 52 to 75 years) were included in this retrospective study. The data was collected between December 15, 2020, and January 15, 2021. Patients were categorized into two groups based on their postoperative FTA. The neutral group consisted of patients with an FTA range of 5.1° to 7.4°, while the varus group included patients with an FTA range of 0.1° to 4.8°. Knee Outcome Osteoarthritis Score (KOOS), Visual Analog Scale (VAS) scores, sit to stand test results, and six minute walk test data were analyzed. RESULTS: The mean follow-up was 42.0±19.3 months. The postoperative VAS score for the varus group was 0.95±0.99, whereas the neutral group had a VAS score of 2.19±1.83 (p=0.021). The mean KOOS for the varus group was 88.01±7.88, whereas the neutral group had a mean KOOS score of 78.46±13.69 (p=0.006). CONCLUSION: In patients undergoing UKA, mild varus alignment could yield superior early and midterm functional outcomes compared to a neutral femorotibial angle.

[Evaluation of the efficacy of medial open wedge high tibial osteotomy combined with anterior cruciate ligament reconstruction in the treatment of varus knee osteoarthritis with anterior cruciate ligament injury].

Objective: To evaluate the efficacy of medial open wedge high tibial osteotomy (MOWHTO) combined with anterior cruciate ligament (ACL) reconstruction in the treatment of varus knee osteoarthritis (OA) with ACL injury. Methods: A follow-up study. The study retrospectively analyzed the patients underwent MOWHTO combined with ACL reconstruction for treatment of varus knee OA with ACL injury in Tianjin Hospital between April 2018 and September 2022. The preoperative and postoperative posterior slope angle (PSA), hip-knee-ankle angle (HKA), visual analog scale (VAS) pain scores, Lysholm score, International Knee Documentation Committee (IKDC) score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and Tegner score were compared. The follow-up indicators were recorded at 6 weeks, 3 months and 1 year after operation, and the complications were recorded. Results: The study included 32 patients (23 males, 9 females) with a mean age of (50.7±8.4) years. The mean follow-up time was (21.2±4.8) months. PSA increased from 9.2°±1.8° preoperatively to 11.1°±2.4° postoperatively, and HKA increased from 168.7°±2.2° to 181.5°±2.2° (both P<0.01). The indicators such as VAS score (6.8±1.1 vs 1.8±0.4), Lysholm score (52.6±7.1 vs 82.0±6.4), IKDC score (64.7±6.2 vs 80.3±10.0), WOMAC score (51.8±6.3 vs 81.8±6.5), and Tegner score (1.9±0.6 vs 5.0±1.0) were all improved after the operation (all P<0.01). Complications occurred in 5 patients (15.6%), including hematomas, sensory abnormalities, intermuscular vein thrombosis and correction angle loss. Conclusion: MOWHTO combined with ACL reconstruction is a safe and effective approach for the treatment of varus knee OA with ACL injury.

Improving material properties of a poloxamer P407 hydrogel-based hydroxyapatite bone substitute material by adding silica-A comparative in vivo study.

The structure and handling properties of a P407 hydrogel-based bone substitute material (BSM) might be affected by different poloxamer P407 and silicon dioxide (SiO2) concentrations. The study aimed to compare the mechanical properties and biological parameters (bone remodeling, BSM degradation) of a hydroxyapatite: silica (HA)-based BSM with various P407 hydrogels in vitro and in an in vivo rat model. Rheological analyses for mechanical properties were performed on one BSM with an SiO2-enriched hydrogel (SPH25) as well on two BSMs with unaltered hydrogels in different gel concentrations (PH25 and PH30). Furthermore, the solubility of all BSMs were tested. In addition, 30 male Wistar rats underwent surgical creation of a well-defined bone defect in the tibia. Defects were filled randomly with PH30 (n = 15) or SPH25 (n = 15). Animals were sacrificed after 12 (n = 5 each), 21 (n = 5 each), and 63 days (n = 5 each). Histological evaluation and histomorphometrical quantification of new bone formation (NB;%), residual BSM (rBSM;%), and soft tissue (ST;%) was conducted. Rheological tests showed an increased viscosity and lower solubility of SPH when compared with the other hydrogels. Histomorphometric analyses in cancellous bone showed a decrease of ST in PH30 (p = .003) and an increase of NB (PH30: p = .001; SPH: p = .014) over time. A comparison of both BSMs revealed no significant differences. The addition of SiO2 to a P407 hydrogel-based hydroxyapatite BSM improves its mechanical stability (viscosity, solubility) while showing similar in vivo healing properties compared to PH30. Additionally, the SiO2-enrichment allows a reduction of poloxamer ratio in the hydrogel without impairing the material properties.

Metal-backed or all-poly tibial components: which are better for medial unicompartmental knee arthroplasty? A propensity-score-matching retrospective study at the 5-year follow-up.

BACKGROUND: This retrospective medium-term follow-up study compares the outcomes of medial fixed-bearing unicompartmental knee arthroplasty (mUKA) using a cemented metal-backed (MB) or an all-polyethylene (AP) tibial component. MATERIALS AND METHODS: The database of our institution was mined for primary mUKA patients implanted with an MB or an AP tibial component (the MB-UKA and AP-UKA groups, respectively) from 2015 to 2018. We compared patient demographics, patient-reported outcome measures (PROMs), and motion analysis data obtained with the Riablo™ system (CoRehab, Trento, Italy). We conducted propensity-score-matching (PSM) analysis (1:1) using multiple variables. RESULTS: PSM analysis yielded 77 pairs of MB-UKA and AP-UKA patients. At 5 years, the physical component summary (PCS) score was 52.4 ± 8.3 in MB-UKA and 48.2 ± 8.3 in AP-UKA patients (p < 0.001). The Forgotten Joint Score (FJS-12) was 82.9 ± 18.8 in MB-UKAs and 73.4 ± 22.5 in AP-UKAs (p = 0.015). Tibial pain was reported by 7.8% of the MB-UKA and 35.1% of the AP-UKA patients (p < 0.001). Static postural sway was, respectively, 3.9 ± 2.1 cm and 5.4 ± 2.3 (p = 0.0002), and gait symmetry was, respectively, 92.7% ± 3.7 cm and 90.4% ± 5.4 cm (p = 0.006). Patient satisfaction was 9.2 ± 0.8 in the MB-UKA and 8.3 ± 2.0 in the AP-UKA group (p < 0.003). CONCLUSIONS: MB-UKA patients experienced significantly better 5-year static sway and gait symmetry outcomes than AP-UKA patients. Although the PROMs of the two groups overlapped, MB-UKA patients had a lower incidence of tibial pain, better FJS-12 and PCS scores, and were more satisfied.

Clinical relevance of positive intraoperative bacterial culture in tibial plateau leveling osteotomy in dogs: a retrospective study.

BACKGROUND: Tibial plateau leveling osteotomy (TPLO) belongs to the most frequently used surgical method for the treatment of cranial cruciate ligament rupture in dogs. Surgical site infection (SSI) is one of the possible postoperative complications. The aim of this study was to evaluate the diagnostic value of intraoperative bacterial culture as a tool for the detection of intraoperative bacterial contamination progressing to infection development in canine TPLO. Electronic patient records from dogs who underwent TPLO between January 2018 to December 2020 were retrospectively reviewed. Intraoperative bacterial culture results, used antimicrobial drugs and presence of SSI were recorded. RESULTS: Ninety-eight dogs were included in the study. SSI rate was 10.2%. All dogs who developed SSI (n = 10) had negative intraoperative bacterial cultures. None of the dogs with positive intraoperative bacterial culture (n = 6) developed SSI. The most cultured bacteria causing SSI was Staphylococcus pseudintermedius (n = 4). CONCLUSIONS: Intraoperative bacterial culture in dogs undergoing TPLO is not suitable as a predictor of surgical site infection.

Superior Pain Reduction with Anteromedialization Tibial Tubercle Osteotomy Versus Non-Operative Management for Patellofemoral Osteoarthritis.

PURPOSE: The purpose of this study was to compare the clinical outcomes of patients with patellofemoral osteoar-thritis (PFOA) treated non-operatively with those treated operatively with an unloading anteromedialization tibial tubercle osteotomy (TTO). METHODS: A retrospective chart review was performed to identify patients with isolated PFOA who were either managed non-operatively or surgically with a TTO and who had a minimum follow-up of 2 years. Patients were surveyed with the visual analog scale (VAS) for pain, Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS-JR), Anterior Knee Pain scale (Kujala), and Tegner Activity scale. Statistical analysis included two-sample t-testing, one-way ANOVA, and bivariate analysis. RESULTS: The clinical outcomes of 49 non-operatively managed patients (mean age: 52.7 ± 11.3 years; mean follow-up: 1.7 ± 1.0 years) and 35 operatively managed patients (mean age: 31.8 ± 9.4 years; mean follow-up: 3.5 ± 1.7 years) were assessed. The mean VAS improved sig-nificantly in both groups [6.12 to 4.22 (non-operative), p < 0.0001; 6.94 to 2.45 (TTO); p < 0.0001], with operatively treated patients having significantly lower postoperative pain than non-operatively managed patients at the time of final follow-up [2.45 (TTO) vs. 4.22 (non-operative), p < 0.001]. The mean KOOS-JR score was significantly greater in the operative group at time of final follow-up [78.7 ± 11.6 (TTO) vs. 71.7 ± 17.8 (non-operative), p = 0.035]. There was no significant difference in Kujala or Tegner scores between the treatment groups. Additionally, there was no sig-nificant relationship between the number of intra-articular injections, duration of NSAID use, and number of physical therapy sessions on clinical outcomes in the non-operatively treated group (p > 0.05). CONCLUSIONS: An unloading anteromedialization TTO provides significantly better pain relief and restoration of function compared to non-operative management in the treatment of symptomatic PFOA.

A numerical investigation for the development of functionally graded Ti/HA tibial implant for total ankle replacement: Influence of material gradation law and volume fraction index.

Stress shielding is one of the major concerns for total ankle replacement implants nowadays, because it is responsible for implant-induced bone resorption. The bone resorption contributes to the aseptic loosening and failure of ankle implants in later stages. To reduce the stress shielding, improvements can be made in the implant material by decreasing the elastic mismatch between the implant and the tibia bone. This study proposes a new functionally graded material (FGM) based tibial implant for minimizing the problem of stress shielding. Three-dimensional finite element (FE) models of the intact tibia and the implanted tibiae were created to study the influence of material gradation law and volume fraction index on stress shielding and implant-bone micromotion. Different implant materials were considered that is, cobalt-chromium, titanium (Ti), and FGM with Ti at the bottom and hydroxyapatite (HA) at the top. The FE models of FGM implants were generated by using different volume fractions and the rule of mixtures. The rule of mixtures was used to calculate the FGM properties based on the local volume fraction. The volume fraction was defined by using exponential, power, and sigmoid laws. For the power and sigmoid law varying volume fraction indices (0.1, 0.2, 0.5, 1, 2, and 5) were considered. The geometry resembling STAR® ankle system tibial implant was considered for the present study. The results indicate that FGMs lower stress shielding but also marginally increase implant-bone micromotion; however, the values were within the acceptable limit for bone ingrowth. It is observed that the material gradation law and volume fraction index influence the performance of FGM tibial implants. The tibial implant composed of FGM using power law with a volume fraction index of 0.1 was the preferred option because it showed the least stress shielding.

Assessment of bone ingrowth around beaded coated tibial implant for total ankle replacement using mechanoregulatory algorithm.

The long-term performance of porous coated tibial implants for total ankle replacement (TAR) primarily depends on the extent of bone ingrowth at the bone-implant interface. Although attempts were made for primary fixation for immediate post-operative stability, no investigation was conducted on secondary fixation. The aim of this study is to assess bone ingrowth around the porous beaded coated tibial implant for TAR using a mechanoregulatory algorithm. A realistic macroscale finite element (FE) model of the implanted tibia was developed based on computer tomography (CT) data to assess implant-bone micromotions and coupled with microscale FE models of the implant-bone interface to predict bone ingrowth around tibial implant for TAR. The macroscale FE model was subjected to three near physiological loading conditions to evaluate the site-specific implant-bone micromotion, which were then incorporated into the corresponding microscale model to mimic the near physiological loading conditions. Results of the study demonstrated that the implant experienced tangential micromotion ranged from 0 to 71 µm with a mean of 3.871 µm. Tissue differentiation results revealed that bone ingrowth across the implant ranged from 44 to 96 %, with a mean of around 70 %. The average Young's modulus of the inter-bead tissue layer varied from 1444 to 4180 MPa around the different regions of the implant. The analysis postulates that when peak micromotion touches 30 µm around different regions of the implant, it leads to pronounced fibrous tissues on the implant surface. The highest amount of bone ingrowth was observed in the central regions, and poor bone ingrowth was seen in the anterior parts of the implant, which indicate improper osseointegration around this region. This macro-micro mechanical FE framework can be extended to improve the implant design to enhance the bone ingrowth and in future to develop porous lattice-structured implants to predict and enhance osseointegration around the implant.

Quantifying Bone and Skin Movement in the Residual Limb-Socket Interface of Individuals With Transtibial Limb Loss Using Dynamic Stereo X-Ray: Protocol for a Lower Limb Loss Cadaver and Clinical Study.

BACKGROUND: Relative motion between the residual limb and socket in individuals with transtibial limb loss can lead to substantial consequences that limit mobility. Although assessments of the relative motion between the residual limb and socket have been performed, there remains a substantial gap in understanding the complex mechanics of the residual limb-socket interface during dynamic activities that limits the ability to improve socket design. However, dynamic stereo x-ray (DSX) is an advanced imaging technology that can quantify 3D bone movement and skin deformation inside a socket during dynamic activities. OBJECTIVE: This study aims to develop analytical tools using DSX to quantify the dynamic, in vivo kinematics between the residual limb and socket and the mechanism of residual tissue deformation. METHODS: A lower limb cadaver study will first be performed to optimize the placement of an array of radiopaque beads and markers on the socket, liner, and skin to simultaneously assess dynamic tibial movement and residual tissue and liner deformation. Five cadaver limbs will be used in an iterative process to develop an optimal marker setup. Stance phase gait will be simulated during each session to induce bone movement and skin and liner deformation. The number, shape, size, and placement of each marker will be evaluated after each session to refine the marker set. Once an optimal marker setup is identified, 21 participants with transtibial limb loss will be fitted with a socket capable of being suspended via both elevated vacuum and traditional suction. Participants will undergo a 4-week acclimation period and then be tested in the DSX system to track tibial, skin, and liner motion under both suspension techniques during 3 activities: treadmill walking at a self-selected speed, at a walking speed 10% faster, and during a step-down movement. The performance of the 2 suspension techniques will be evaluated by quantifying the 3D bone movement of the residual tibia with respect to the socket and quantifying liner and skin deformation at the socket-residuum interface. RESULTS: This study was funded in October 2021. Cadaver testing began in January 2023. Enrollment began in February 2024. Data collection is expected to conclude in December 2025. The initial dissemination of results is expected in November 2026. CONCLUSIONS: The successful completion of this study will help develop analytical methods for the accurate assessment of residual limb-socket motion. The results will significantly advance the understanding of the complex biomechanical interactions between the residual limb and the socket, which can aid in evidence-based clinical practice and socket prescription guidelines. This critical foundational information can aid in the development of future socket technology that has the potential to reduce secondary comorbidities that result from complications of poor prosthesis load transmission. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/57329.

Lengthening in congenital posteromedial bowing of tibia: a follow-up series at skeletal maturity.

PURPOSE: Congenital posteromedial bowing (CPMB) of tibia is a rare, usually self-resolving condition that is present at birth. The data on the long-term outcome of lengthening, choice of fixator, outcome in early and late age groups, and complications is sparse, hence the need for this study. METHODS: This retrospective study included 93 patients with 94 affected legs from 1991 to 2023. The patients were categorized into early (under 10 years) and late (10 years or above) intervention groups. Eighteen patients with nineteen lengthening episodes who attained skeletal maturity made the basis of this study and will be discussed in detail. RESULTS: The outcome for the lengthening group at maturity was satisfactory, with 5.53 cm of average length gained per lengthening episode, a mean LLD of 0.31 cm at final follow-up, a mean age of 23.63 years (range 14-38 years), and an average follow-up of 12.51 years (range 3-28 years) post-lengthening, but the procedure was associated with difficulties like ankle stiffness, tibial valgus, pin tract infections, and fractures through regenerate. CONCLUSION: This study represents a large single-centre series on CPMB. We recommend that surgery for lengthening should be done at an older age, close to skeletal maturity, wherever possible to reduce the risk of repeat lengthening procedures. Based on our experience, we recommend the use of a circular fixator. Uniplanar distractors should have an adequate number and spread of Schanz screws in each segment to reduce the risk of valgus malalignment of distracting segments of bone.

[Application of antibiotic bone cement-coated plates internal fixation for primary treating Gustilo type â ¢B tibiofibular open fracture].

Objective: To explore the effectiveness of using antibiotic bone cement-coated plates internal fixation technology as a primary treatment for Gustilo type ⅢB tibiofibular open fractures. Methods: The clinical data of 24 patients with Gustilo type ⅢB tibiofibular open fractures who were admitted between January 2018 and December 2021 and met the selection criteria was retrospectively analyzed. Among them, there were 18 males and 6 females, aged from 25 to 65 years with an average age of 45.8 years. There were 3 cases of proximal tibial fracture, 6 cases of middle tibial fracture, 15 cases of distal tibial fracture, and 21 cases of fibular fracture. The time from injury to emergency surgery ranged from 3 to 12 hours, with an average of 5.3 hours. All patients had soft tissue defects ranging from 10 cm×5 cm to 32 cm×15 cm. The time from injury to skin flap transplantation for wound coverage ranged from 1 to 7 days, with an average of 4.1 days, and the size of skin flap ranged from 10 cm×5 cm to 33 cm×15 cm. Ten patients had bone defects with length of 2-12 cm (mean, 7.1 cm). After emergency debridement, the tibial fracture end was fixed with antibiotic bone cement-coated plates, and the bone defect area was filled with antibiotic bone cement. Within 7 days, the wound was covered with a free flap, and the bone cement was replaced while performing definitive internal fixation of the fracture. In 10 patients with bone defect, all the bone cement was removed and the bone defect area was grafted after 7-32 weeks (mean, 11.8 weeks). The flap survival, wound healing of the affected limb, complications, and bone healing were observed after operation, and the quality of life was evaluated according to the short-form 36 health survey scale (SF-36 scale) [including physical component summary (PCS) and mental component summary (MCS) scores] at 1 month, 6 months after operation, and at last follow-up. Results: All 24 patients were followed up 14-38 months (mean, 21.6 months). All the affected limbs were successfully salvaged and all the transplanted flaps survived. One case had scar hyperplasia in the flap donor site, and 1 case had hypoesthesia (grade S3) of the skin around the scar. There were 2 cases of infection in the recipient area of the leg, one of which was superficial infection after primary flap transplantation and healed after debridement, and the other was sinus formation after secondary bone grafting and was debrided again 3 months later and treated with Ilizarov osteotomy, and healed 8 months later. The bone healing time of the remaining 23 patients ranged from 4 to 9 months, with an average of 6.1 months. The scores of PCS were 44.4±6.5, 68.3±8.3, 80.4±6.9, and the scores of MCS were 59.2±8.2, 79.5±7.8, 90.0±6.6 at 1 month, 6 months after operation, and at last follow-up, respectively. The differences were significant between different time points ( P<0.05). Conclusion: Antibiotic bone cement-coated plates internal fixation can be used in the primary treatment of Gustilo type ⅢB tibiofibular open fractures, and has the advantages of reduce the risk of infection in fracture fixation, reducing complications, and accelerating the functional recovery of patients.

[Research progress of femoral bone tunnel positioning in anterior cruciate ligament reconstruction].

Objective: To review the concept and methods of femoral bone tunnel positioning in anterior cruciate ligament (ACL) reconstruction, in order to provide a reference for clinical treatment. Methods: The relevant literature on the concept and methods of femoral bone tunnel positioning in ACL reconstruction in domestic and international research was extensively reviewed. Results: The position of the femoral bone tunnel is a key factor in determining the prognosis of ACL reconstruction. The concept of femoral bone tunnel positioning in ACL reconstruction has experienced isometric reconstruction, anatomical reconstruction, Ribbon-like theory, I.D.E.A.L. theory, and nearly isometric reconstruction theory. The femoral bone tunnel positioning technique is also changing with the in-depth study of the anatomy and biomechanics of the ACL, and each bone tunnel positioning technique has its own advantages and disadvantages. Over-The-Top technique is now mainly used for ACL revision; the clock-face positioning method is basically no longer applicable due to the large error, poor stability, and low retrievability; the bone landmarks positioning method (the lateral condyle of the femur's Resident's ridge and bifurcation ridge, and the the apex of the deep cartilage), which is now mostly used clinically due to the more constant anatomical landmarks. The quadrant method under X-ray fluoroscopy is more cumbersome to implement intraoperatively, so it is mainly used for academic research; computer navigation-assisted positioning has gradually become popular in recent years, which is highly accurate, avoids the influence of human factors on the positioning of the bone tunnel, and has a very good prospect of application; three-dimensional printing-assisted positioning technology, which is accurate in positioning, with a high degree of reproducibility and a short learning curve. Conclusion: The concept of femoral bone tunnel positioning for ACL reconstruction has undergone several evolutions, reflecting the deepening of the understanding of ACL and the improvement of the clinical results of reconstruction. The precision, personalization, and intelligence of positioning techniques are the focus of current and future development.