RÉSUMÉ
C-scorpionate metal complexes, specifically, [NiCl2(tpm)]·3H2O, [CoCl2(tpm)]·3H2O and [PdCl2(tpm)] [tpm = hydrotris(1H-pyrazol-1-yl)methane], were effective in the N-formylation and N-methylation of amines using carbon dioxide, as carbon source, in the presence of sodium borohydride. Various parameters were studied, including reaction time, temperature, solvent volume, presence of additives, and catalyst amount. These parameters were found to have a significant impact on the selectivity of the product. [NiCl2(tpm)]·3H2O exhibited good conversion at 80 °C, but its selectivity towards formamide decreased with prolonged reaction time. Increasing the amount of [NiCl2(tpm)]·3H2O, the selectivity changed. [PdCl2(tpm)] showed different selectivity compared to [NiCl2(tpm)]·3H2O, while [CoCl2(tpm)]·3H2O presented poor results. Monitoring the reaction course by 1H NMR revealed the presence of an intermediate species that influenced product formation. These results highlight the versatility and catalytic potential of C-scorpionate metal complexes in the N-formylation/N-methylation of amines in the catalytic system (NaBH4/MeCN/CO2).
RÉSUMÉ
Correction for 'The reaction of acetonitrile with hydrogen peroxide in alkaline medium: a DFT mechanistic study of green production of amides' by Girolamo Casella et al., Phys. Chem. Chem. Phys., 2023, https://doi.org/10.1039/d3cp02024j.
RÉSUMÉ
The growing worldwide cancer incidence, coupled to the increasing occurrence of multidrug cancer resistance, requires a continuous effort towards the identification of new leads for cancer management. In this work, two C-scorpionate complexes, [FeCl2(κ3-Tpm)] (1) and [Co(κ3-TpmOH)2](NO3)2 (2), (Tpm = hydrotris(pyrazol-1-yl)methane and TpmOH = 2,2,2-tris(pyrazol-1-yl)ethanol), were studied as potential scaffolds for future anticancer drug development. Their cytotoxicity and cell migration inhibitory activity were analyzed, and an untargeted metabolomics approach was employed to elucidate the biological processes significantly affected by these two complexes, using two tumoral cell lines (B16 and HCT116) and a non-tumoral cell line (HaCaT). While [FeCl2(κ3-Tpm)] did not display a significant cytotoxicity, [Co(κ3-TpmOH)2](NO3)2 was particularly cytotoxic against the HCT116 cell line. While [Co(κ3-TpmOH)2](NO3)2 significantly inhibited cell migration in all tested cell lines, [FeCl2(κ3-Tpm)] displayed a mixed activity. From a metabolomics perspective, exposure to [FeCl2(κ3-Tpm)] was associated with changes in various metabolic pathways involving tyrosine, where iron-dependent enzymes are particularly relevant. On the other hand, [Co(κ3-TpmOH)2](NO3)2 was associated with dysregulation of cell adhesion and membrane structural pathways, suggesting that its antiproliferative and anti-migration properties could be due to changes in the overall cellular adhesion mechanisms.
Sujet(s)
Antinéoplasiques , Complexes de coordination , Tumeurs , Humains , Antinéoplasiques/pharmacologie , Lignée cellulaire , Complexes de coordination/composition chimiqueRÉSUMÉ
We have investigated using DFT methods the reaction mechanism of the Radzisewski reaction to obtain an amide via the reaction of ACN and H2O2 under alkaline conditions. The direct reaction between ACN and H2O2 showed a quite high activation energy (about 45 kcal mol-1) rendering this path unreliable. Instead, a fast reaction between ACN and HOO- forming the deprotonated species (PAIA-) of the peroxyacetimidic acid (PAIA) was observed. From this, PAIA- was guessed to form PAIA through a fast reaction of hydrolysis. Moreover, a second way of formation of PAIA, through an OH- catalyzed path, made the rate determining step (RDS) in very good agreement with experimental data, hence neglecting the contribution of the kinetically favored hydrolysis of PAIA-. This discrepancy was reconciled by considering that the final amide was obtained through a regioselective path forming the PAIA and the further reaction involving the decomposition of PAIA and PAIA-. Indeed, the PAIA obtained from the hydrolysis reaction showed a configuration which did not match the configurational behavior required. Conversely, the PAIA formed from the RDS path matched the required configuration needed to obtain the amide. Our findings also disentangled the experimenal debate on the assignment of the RDS.
RÉSUMÉ
The conversion of renewable feedstocks into new added-value products is a current hot topic that includes the biodiesel industry. When converting vegetable oils into biodiesel, approximately 10% of glycerol byproduct is produced. Glycerol can be envisaged as a chemical platform due to its chemical versatility, as a scaffold or building block, in producing a wide range of added-value chemicals. Thus, the development of sustainable routes to obtain glycerol-based products is crucial and urgent. This certainly encompasses the use of raw carbonaceous materials from biomass as heterogeneous acid catalysts. Moreover, the integration of surface functional groups, such as sulfonic acid, in carbon-based solid materials, makes them low cost, exhibiting high catalytic activity with concomitant stability. This review summarizes the work developed by the scientific community, during the last 10 years, on the use of biochar catalysts for glycerol transformation.
Sujet(s)
Biocarburants , Glycérol , Catalyse , Charbon de boisRÉSUMÉ
Aiming to develop a nanoparticle-based optical biosensor using gold nanoparticles (AuNPs) synthesized using green methods and supported by carbon-based nanomaterials, we studied the role of carbon derivatives in promoting AuNPs localized surface plasmon resonance (LSPR), as well as their morphology, dispersion, and stability. Carbon derivatives are expected to work as immobilization platforms for AuNPs, improving their analytical performance. Gold nanoparticles (AuNPs) were prepared using an eco-friendly approach in a single step by reduction of HAuCl4·3H2O using phytochemicals (from tea) which act as both reducing and capping agents. UV-Vis spectroscopy, transmission electron microscopy (TEM), zeta potential (ζ-potential), and X-ray photoelectron spectroscopy (XPS) were used to characterize the AuNPs and nanocomposites. The addition of reduced graphene oxide (rGO) resulted in greater dispersion of AuNPs on the rGO surface compared with carbon-based nanomaterials used as a support. Differences in morphology due to the nature of the carbon support were observed and are discussed here. AuNPs/rGO seem to be the most promising candidates for the development of LSPR biosensors among the three composites we studied (AuNPs/G, AuNPs/GO, and AuNPs/rGO). Simulations based on the Mie scattering theory have been used to outline the effect of the phytochemicals on LSPR, showing that when the presence of the residuals is limited to the formation of a thin capping layer, the quality of the plasmonic resonance is not affected. A further discussion of the application framework is presented.
Sujet(s)
Techniques de biocapteur , Graphite , Nanoparticules métalliques , Techniques de biocapteur/méthodes , Or/composition chimique , Graphite/composition chimique , Nanoparticules métalliques/composition chimiqueRÉSUMÉ
The transformation of biomass, a carbon resource presenting a huge potential to produce valuable chemicals, requires the search for sustainable catalytic routes. This work proposes the microwave-assisted oxidation of biomass -derived substrates, such as glycerol and the furfural derivatives 5-(hydroxymethyl)furfural (HMF) and 5-hydroxymethyl-2-furancarboxylic acid (HFCA), using the C-scorpionate dichloro-gold(III) complex [AuCl2(κ2-Tpm)]Cl (Tpm = HCpz3; pz = pyrazol-1-yl) as a catalyst, as prepared and supported on graphene, in solvent-free conditions. The unprecedented application of a mechanochemical procedure (in a planetary ball mill, in solid state) to synthesize a C-scorpionate complex, the [AuCl2(κ2-Tpm)]Cl, is disclosed. The immobilization of [AuCl2(κ2-Tpm)]Cl on graphene was performed using different methods, including some (e.g., microwave irradiation and liquid assisted grinding) for the first time. The structural properties and the performance of the prepared catalytic materials are presented and discussed.
RÉSUMÉ
The highly efficient eco-friendly synthesis of acetic acid (40% yield) directly from ethane is achieved by the unprecedented use of N-heterocyclic carbene (NHC) and N-heterocyclic oxo-carbene (NHOC) gold(I) catalysts in mild conditions. This is a selective and promising protocol to generate directly acetic acid from ethane, in comparison with the two most used methods: (i) the three-step, capital- and energy-intensive process based on the high-temperature conversion of methane to acetic acid; (ii) the current industrial methanol carbonylation processes, based in iridium and expensive rhodium catalysts. Green metrics determinations highlight the environmental advantages of the new ethane oxidation procedure. Comparison with previous reported published catalysts is performed to highlight the features of this remarkable protocol.
RÉSUMÉ
The production of cyclic carbonates from CO2 cycloaddition to epoxides, using the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz = 1H-pyrazol-1-yl) as a catalyst, is achieved in excellent yields (up to 98%) in a tailor-made ionic liquid (IL) medium under mild conditions (80 °C; 1-8 bar). A favorable synergistic catalytic effect was found in the [FeCl2{κ3-HC(pz)3}]/IL system. Notably, in addition to exhibiting remarkable activity, the catalyst is stable during ten consecutive cycles, the first decrease (11%) on the cyclic carbonate yield being observed during the 11th cycle. The use of C-scorpionate complexes in ionic liquids to afford cyclic carbonates is presented herein for the first time.
Sujet(s)
Dioxyde de carbone/composition chimique , Carbonates/composition chimique , Réaction de cycloaddition , Fer/composition chimique , Catalyse , Composés époxy/composition chimique , Liquides ioniques/composition chimique , Cinétique , Spectrophotométrie IR , TempératureRÉSUMÉ
This study addresses the combination of customized surface modification with the use of nanofluids, to infer on its potential to enhance pool-boiling heat transfer. Hydrophilic surfaces patterned with superhydrophobic regions were developed and used as surface interfaces with different nanofluids (water with gold, silver, aluminum and alumina nanoparticles), in order to evaluate the effect of the nature and concentration of the nanoparticles in bubble dynamics and consequently in heat transfer processes. The main qualitative and quantitative analysis was based on extensive post-processing of synchronized high-speed and thermographic images. To study the nucleation of a single bubble in pool boiling condition, a numerical model was also implemented. The results show an evident benefit of using biphilic patterns with well-established distances between the superhydrophobic regions. This can be observed in the resulting plot of the dissipated heat flux for a biphilic pattern with seven superhydrophobic spots, δ = 1/d and an imposed heat flux of 2132 w/m2. In this case, the dissipated heat flux is almost constant (except in the instant t* ≈ 0.9 when it reaches a peak of 2400 W/m2), whilst when using only a single superhydrophobic spot, where the heat flux dissipation reaches the maximum shortly after the detachment of the bubble, dropping continuously until a new necking phase starts. The biphilic patterns also allow a controlled bubble coalescence, which promotes fluid convection at the hydrophilic spacing between the superhydrophobic regions, which clearly contributes to cool down the surface. This effect is noticeable in the case of employing the Ag 1 wt% nanofluid, with an imposed heat flux of 2132 W/m2, where the coalescence of the drops promotes a surface cooling, identified by a temperature drop of 0.7 °C in the hydrophilic areas. Those areas have an average temperature of 101.8 °C, whilst the average temperature of the superhydrophobic spots at coalescence time is of 102.9 °C. For low concentrations as the ones used in this work, the effect of the nanofluids was observed to play a minor role. This can be observed on the slight discrepancy of the heat dissipation decay that occurred in the necking stage of the bubbles for nanofluids with the same kind of nanoparticles and different concentration. For the Au 0.1 wt% nanofluid, a heat dissipation decay of 350 W/m2 was reported, whilst for the Au 0.5 wt% nanofluid, the same decay was only of 280 W/m2. The results of the numerical model concerning velocity fields indicated a sudden acceleration at the bubble detachment, as can be qualitatively analyzed in the thermographic images obtained in this work. Additionally, the temperature fields of the analyzed region present the same tendency as the experimental results.
RÉSUMÉ
The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe3O4/TiO2/[FeCl2{κ3-HC(pz)3}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the "greeness" of the new ethane oxidation procedure.
Sujet(s)
Acide acétique/composition chimique , Complexes de coordination/composition chimique , Éthane/composition chimique , Composés du fer/composition chimique , Catalyse , Modèles moléculaires , Conformation moléculaire , OxydoréductionRÉSUMÉ
In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.
Sujet(s)
Liquides ioniques/composition chimique , Composés d'ammonium/composition chimique , Phénomènes chimiques , Conductivité électrique , Techniques électrochimiques/tendances , Électrochimie/tendances , Électrolytes/composition chimique , Imidazoles/composition chimique , Structure moléculaire , Composés organiques du phosphore/composition chimique , Pyrrolidines/composition chimique , Solvants/composition chimique , Composés de sulfonium/composition chimique , Température , ViscositéRÉSUMÉ
For the first time, herein is reported the use of a magnetic core-shell support for a C-scorpionate metallic complex. The prepared hybrid material, that consists on the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz, pyrazolyl) immobilized at magnetic core-shell particles (Fe3O4/TiO2), was tested as catalyst for the oxidation of secondary alcohols using the model substrate 1-phenylethanol. Moreover, the application of alternative energy sources (e.g., ultrasounds, microwaves, mechanical or thermal) for the peroxidative alcohol oxidation using the magnetic heterogenized iron(II) scorpionate led to different/unusual outcomes that are presented and discussed.
RÉSUMÉ
ZnO nanoparticles (ZnONPs) were successfully synthesized using bravo-de-esmolfe apple extract in aqueous medium at room temperature. ZnO microparticles, prepared with a pure apple phytochemical, quercetin (ZnOq), or without phytochemicals (ZnO) were studied for comparative purposes. The re-use of apple waste for highly efficient catalyst production, based on green synthetic routes, can be added to the concept of a circular economy. The synthesized ZnO particles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption/desorption Brunauer-Emmett-Teller (BET) theory. The XRD patterns indicated the formation of a hexagonal wurtzite phase with high purity and SEM and TEM analyses revealed the morphology of the particles. The apple extract produced spherical ZnONPs composed of round lamina-like structures, similar to the micro sized lamina-like shape of ZnOq and dissimilar to the flower-like shape of ZnO. The green synthesized ZnO nanoparticles (ZnONPs) led to a high product yield of ca. 96% within 24 h of reaction time in the transesterification reaction of different carboxylic esters.
RÉSUMÉ
Iron-containing particulate catalysts of 0.1-1 µm size were prepared by wet and ball-milling procedures from common salts and characterized by FTIR, TGA, UV-Vis, PXRD, FEG-SEM, and XPS analyses. It was found that when the wet method was used, semi-spherical magnetic nanoparticles were formed, whereas the mechanochemical method resulted in the formation of nonmagnetic microscale needles and rectangles. Catalytic activity of the prepared materials in the oxidation of 1-phenylethanol to acetophenone was assessed under conventional heating, microwave (MW) irradiation, ultrasound (US), and oscillating magnetic field of high frequency (induction heating). In general, the catalysts obtained by wet methods exhibit lower activities, whereas the materials prepared by ball milling afford better acetophenone yields (up to 83%). A significant increase in yield (up to 4 times) was observed under the induction heating if compared to conventional heating. The study demonstrated that MW, US irradiations, and induction heating may have great potential as alternative ways to activate the catalytic system for alcohol oxidation. The possibility of the synthesized material to be magnetically recoverable has been also verified.
Sujet(s)
Acétophénones/composition chimique , Alcools benzyliques/composition chimique , Fer/composition chimique , Nanoparticules de magnétite/composition chimique , Catalyse/effets des radiations , Chauffage , Micro-ondes , Oxydoréduction , Thermodynamique , Ondes ultrasonoresRÉSUMÉ
The efficiency of Au/TiO2 based catalysts in 1-phenylethanol oxidation was investigated. The role of support modifiers (La2O3 or CeO2), influence of gold loading (0.5% or 4%) and redox pretreatment atmosphere, catalyst recyclability, effect of oxidant: tert-butyl hydroperoxide (TBHP) or O2, as well as the optimization of experimental parameters of the reaction conditions in the oxidation of this alcohol were studied and compared with previous studies on 1-octanol oxidation. Samples were characterized by temperature-programmed oxygen desorption (O2-TPD) method. X-ray photoelectron spectroscopy (XPS) measurements were carried out for used catalysts to find out the reason for deactivation in 1-phenylethanol oxidation. The best catalytic characteristics were shown by catalysts modified with La2O3, regardless of the alcohol and the type of oxidant. When O2 was used, the catalysts with 0.5% Au, after oxidative pretreatment, showed the highest activity in both reactions. The most active catalysts in 1-phenylethanol oxidation with TBHP were those with 4% Au and the H2 treatment, while under the same reaction conditions, 0.5% Au and O2 treatment were beneficial in 1-octanol oxidation. Despite the different chemical nature of the substrates, it seems likely that Au+(Auδ+) act as the active sites in both oxidative reactions. Density functional theory (DFT) simulations confirmed that the gold cationic sites play an essential role in 1-phenylethanol adsorption.
RÉSUMÉ
Intensification of chemical processes according to the motto "faster, simpler, greener" is among the main concerns nowadays. One of the ways of intensification is the application of synergistic catalytic effects when the overall efficiency of a composite catalyst is much higher than the sum of the component activities. Here, we report on the preparation of synergistic catalytic materials by a simple and straightforward ball milling procedure. Oxidation of benzoin was selected as a model reaction to demonstrate the viability of the concept. For the V2O5-TiO2 (95 : 5) composite material, the synergistic effect is triggered by low power microwave irradiation with more than a tenfold jump in the catalytic activity in comparison to the activities of the individual components.
RÉSUMÉ
The effect of microwave and mechanochemical ball milling energy inputs was studied for the peroxidative oxidation (with aqueous H2O2) of cyclohexane to cyclohexanol and cyclohexanone, over CoCl2 and/or V2O5 dispersed (µm scale) catalysts. A maximum total yield of cyclohexanol and cyclohexanone of 43% after 1 h of reaction at 30 °C, in acetonitrile and under microwave irradiation (5 W), was achieved over the CoCl2-V2O5 (3 : 1) catalyst prepared by ball milling. Cyclohexanol is the main final product with a selectivity of up to 93% over cyclohexanone. Conducting the oxidation reaction under microwave irradiation under the same conditions but without any mechanochemical treatment of the catalyst prior to use resulted in a lower total yield of 30% with a lower selectivity (69%) towards cyclohexanol over cyclohexanone. The sole application of mechanochemical treatment for the catalyst preparation and the catalytic oxidation of cyclohexane allowed to reach yields of 29% after 1 h of reaction, at room temperature, without microwave irradiation and any additive and in the absence of any organic solvent. Ball milling is shown to provide a convenient, solvent-free method to disperse these solid catalysts and to promote the above cyclohexane oxidation, although, in the latter case, not so effectively as microwave irradiation.
RÉSUMÉ
Gold nanoparticles (AuNPs) were prepared using an eco-friendly approach in a single step by reduction of HAuCl4 with polyphenols from tea extracts, which act as both reducing and capping agents. The obtained AuNPs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultravioletâ»visible spectroscopy (UVâ»vis), and X-ray photoelectron spectroscopy (XPS). They act as highly efficient catalysts in the reduction of various aromatic nitro compounds in aqueous solution. The effects of a variety of factors (e.g., reaction time, type and amount of reducing agent, shape, size, or amount of AuNPs) were studied towards the optimization of the processes. The total polyphenol content (TPC) was determined before and after the catalytic reaction and the results are discussed in terms of the tea extract percentage, the size of the AuNPs, and their catalytic activity. The reusability of the AuNP catalyst in the reduction of 4-nitrophenol was also tested. The reactions follow pseudo first-order kinetics.
RÉSUMÉ
C-Scorpionate vanadium(IV) [VOx Cl3-x {κ3 -RC(pz)3 }] [pz=pyrazol-1-yl; x=0, R=SO3 (1); x=1, R=CH2 OH (2) or CH2 OSO2 Me (3)] complexes supported on functionalized carbon nanotubes (CNTs) are the first V-scorpionate catalysts used so far for the neat oxidation of o-, m- or p-xylene, with TBHP (70 % aqueous solution), to the corresponding toluic acids (main products), tolualdehydes and methylbenzyl alcohols. Remarkably, a p-toluic acid yield of 43 % (73 % selectivity, TON=1.34×103 ) was obtained with 2@CNT in a simple microwave-assisted mild oxidation procedure, using a very low catalyst charge (3.2×10-2 â mol % vs. substrate). Further, this occurred in the absence of any bromine source, what is significant towards the development of a greener and more sustainable process for oxidation of xylenes. Moreover, reuse of catalysts with preservation of their activity was found for up to six consecutive cycles. The effects of reaction parameters, such as reaction time, temperature, amount of catalyst or type of heating source, on the performance of the above catalytic systems are reported and discussed.