RÉSUMÉ
Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.
Sujet(s)
Agriculture , Dépollution biologique de l'environnement , Assainissement et restauration de l'environnement , Pesticides , Polluants du sol , Sol , Polluants du sol/analyse , Pesticides/analyse , Pesticides/composition chimique , Agriculture/méthodes , Assainissement et restauration de l'environnement/méthodes , Sol/composition chimique , HumainsRÉSUMÉ
The use of remediated soils as end-of-life materials raises some challenges including policy and regulation, permits and specifications, technological limitations, knowledge and information, costs, as well as quality and performance associated with using them. Therefore, a set of procedures must be followed to preserve the quality and fundamental properties of soil during a remediation process. This study presented a comprehensive review regarding the fundamental impacts of thermal desorption (TD) and soil washing (SW) on soil characteristics. The effects of main operating parameters of TD and SW on the physical, chemical, and biological properties of soil were systematically reviewed. In TD, temperature has a more remarkable effect on physic-chemical and biological characteristics of soil than heating time. Therefore, decrease in temperature within a suitable range prevents unreversible changes on soil properties. In SW, more attention should be paid to extraction process of contaminants from soil particles. Using the right dosage and type of chelating agents, surfactants, solvents, and other additives can help to avoid problems with recovery or treatment using conventional methods. In addition, this review introduced a framework for implementing sustainable remediation approaches based on a holistic approach to best management practices (BMPs), which, besides reducing the risks associated with different pollutants, might provide new horizons for decreasing the unfavourable impacts of TD and SW on soil.
Sujet(s)
Assainissement et restauration de l'environnement , Polluants du sol , Sol/composition chimique , Polluants du sol/analyse , Tensioactifs/composition chimique , TempératureRÉSUMÉ
Removing petroleum hydrocarbons (PHCs) from polluted soil is challenging due to their low bioavailability and degradability. In this study, an experiment was carried out to treat soil polluted with petroleum hydrocarbon using a hybrid electro-Fenton (with BDD anode electrode) and biological processes stimulated with long-chain rhamnolipids (biosurfactants). Electro-Fenton treatment was applied as a pretreatment before the biological process to enhance PHC biodegradability, which would benefit the subsequent biological process. The effects of initial pH, hydroxide concentration, soil organic matter composition, PHCs intermediates during the electro-Fenton process, and total numbers of bacteria in the biological process were analyzed to determine the optimum conditions. The results showed that the optimized electrolysis time for the electro-Fenton was 12 h. The change induced during pretreatment at a specified time was found suitable for the biological process stage and led to 93.6% PHC degradation in combination with the electro-Fenton-and-biological process after 72 h. The combined system's performance was almost 40% higher than individual electro-Fenton and biological treatments. GC-MS analysis confirms the formation of 9-octadecen-1-ol (Z), 2-heptadecene, 1-nonadecene, 1-heneicosene, and pentacosane as fragmentation during the PHCs degradation process. Thus, the electro-Fenton process as pretreatment combined with a biological process stimulated with rhamnolipids (biosurfactants) could be effectively applied to remediate soil polluted with PHCs. However, the system needs further research and investigation to optimize electrolysis time and biosurfactant dose to advance this approach in the soil remediation process.
Sujet(s)
Pétrole , Polluants du sol , Sol/composition chimique , Hydrocarbures , Électrolyse , Chromatographie gazeuse-spectrométrie de masse , Polluants du sol/composition chimique , Peroxyde d'hydrogène/composition chimiqueRÉSUMÉ
Inadequate solid waste management (SWM) can lead to environmental contamination and human health risks. The health risks from poor SWM can vary based on specific practices and exposure pathways. Thus, it is necessary to adequately understand the local context. This information, however, is rarely available in low-resource settings, particularly in rural areas. A solid waste safety plan could be helpful in these settings for gathering necessary data to assess and minimize health risks. As a step in developing such a tool, a semi-quantitative health risk analysis of SWM practices in nine Ghanaian rural villages was undertaken. Data on SWM in each village were collected through qualitative field observations and semi-structured interviews with local stakeholders. SWM-related health risks were assessed using the collected data, similar case studies in the scientific literature and dialogue among an assembled team of experts. The analysis identified context-specific practices and exposure pathways that may present the most substantial health risks as well as targeted solutions for mitigation risks. A risk assessment matrix was developed to quantify SWM risks as low, medium, high, or very high based on the likelihood and severity of identified hazards. The highest SWM risks were identified from dumpsites and uncontrolled burying of solid waste. More specifically, a very high or high risk of infectious and vector-borne diseases from SWM in the villages was identified, both in the disposal of solid waste in dumpsites and uncontrolled burying of solid waste. Additionally, a very high or high risk of inhalation, ingestion or dermal contact with contaminants was found in the disposal of solid waste in dumpsites, open burning of waste and reuse of waste from dumpsites as compost. The results demonstrate the potential value of a solid waste safety plan and a parsimonious approach to collect key local data to inform its contents.
Sujet(s)
Élimination des déchets , Gestion des déchets , Humains , Déchets solides , Ghana , Gestion des déchets/méthodes , Élimination des déchets/méthodesRÉSUMÉ
The Brazilian National Solid Waste Policy (BNSWP) determines that reverse logistics (RL) of waste batteries is mandatory and adopts the principle of shared responsibility among stakeholders. In this work, we sought to diagnose the current state of the RL chain for batteries in Vale do Aço, Brazil, and identify challenges and potentialities related to its improvement. Data were obtained by means of questionnaires sent to the main stakeholders involved in the batteries RL chain and by consultation of official Brazilian databases. The results showed that the main obstacles to the implementation of the RL of portable batteries in the region are: the lack of information by consumers and retailers regarding the BNSWP and management of waste batteries; the existence of few collection and consolidation points in the region; lack of municipal waste management plans; and lack of sustainability of waste picker organizations. The identified potentialities were: the good receptivity of environmental education actions by the population; the possibility of taking advantage of direct logistics of local retail chains to collect waste; the existence of a special waste management and transportation company in the region; and the existence of waste picker organizations interested in integrating the RL system. Finally, by a SWOT analysis, strategies for the implementation of a more effective RL system were drawn up. This work can serve as a basis for the structuring and implementation of the batteries RL system at the Metropolitan Region of Vale do Aço (MRVA) and can be a reference for other settings.
RÉSUMÉ
Environmental pollution by hydrophobic hydrocarbons is increasing, notably nowadays due to a large amount of industrial activity. Microbial electrochemical technologies (MET) are promising bio-based systems which can oxidize hydrophobic hydrocarbon pollutants and produce bioelectricity simultaneously. However, MET faces some issues in terms of soil remediation, including low mass transfer, limited electro-activity of anodes as electron acceptors, low bioavailability of hydrocarbons, and the limited activity of beneficial bacteria and inefficient electron transport. This study aims to investigate the role of the addition of rhamnolipid as an analyte solution to the MET to enhance the efficacy and concurrently solve the abovementioned issues. In this regard, a novel long chain of RL was produced by using low-cost carbon winery waste through non-pathogenic Burkholderia thailandensis E264 strains. Different doses of RL were tested, including 10, 50, and 100 mg/L. A maximum enhancement in the oxidation of hydrophobic hydrocarbons was found to be up to 72.5%, while the current density reached 9.5 Am-2 for the MET reactor having a dose of 100 mg/L. The biosurfactants induced a unique microbial enrichment associated with Geobacter, Desulfovibrio, Klebsiella, and Comamona on the anode surface, as well as Pseudomonas, Acinetobacter, and Franconibacter in soil MET, indicating the occurrence of a metabolic pathway in microbes working with the anode and soil bioelectrochemical remediation system. According to cyclic voltammetry analysis, redox peaks appeared, showing a minor shift in redox MET-biosurfactant compared to the bare MET system. Furthermore, the phytotoxicity of polluted soil to L. sativum seeds after and before MET remediation shows a decrease in phytotoxicity of 77.5% and 5% for MET-biosurfactant system and MET only, respectively. With MET as a tool, this study confirmed for the first time that novel long-chain RL produced from non-Pseudomonas bacteria could remarkably facilitate the degradation of petroleum hydrocarbon via extracellular electron transfer, which provides novel insights to understand the mechanisms of RL regulating petroleum hydrocarbon degradation.
Sujet(s)
Pétrole , Polluants du sol , Dépollution biologique de l'environnement , Carbone , Glycolipides , Hydrocarbures/métabolisme , Pétrole/analyse , Pseudomonas/métabolisme , Sol/composition chimique , Microbiologie du sol , Polluants du sol/analyseRÉSUMÉ
Municipal solid waste disposed of in illegal dumpsites pollutes the surface and groundwater. However, accurately determining these pollution levels is typically challenging for practitioners and decision-makers in developing countries. The purpose of this study is to use the leachate pollution index (LPI) to assess the contamination potential of uncontrolled dumping sites along the course of the Kulfo River in Arba Minch, Ethiopia. The comprehensive pollution index (CPI) approach was also utilized to assess the suitability of Kulfo River water quality for aquatic species. Leachate samples were collected from four uncontrolled dumping sites along the Kulfo River's course and analyzed for fifteen leachate characteristics necessary to quantify the LPI sub-indices. Water samples were taken from three monitoring stations along the river and examined for aquatic species suitability. When the leachate parameters were compared to the Indian limit for discharge of treated leachate, it was found that dumping sites posed a considerable risk of pollution to adjacent water resources. The overall LPI ranged from 23.34 to 27.35, which is higher than the discharge standard LPI of 5.69, indicating that dumping sites can threaten the surrounding water resources and human health. Based on the rating scale of CPI, at all monitoring stations, the river resulted severely polluted. Finally, appropriate strategies to reduce the pollution and the related mismanagement of solid waste were discussed. Combining LPI and CPI methods can represent a crucial tool for experts and decision-makers in developing countries to evaluate the pollution potential of dumping sites and water resource monitoring.
Sujet(s)
Élimination des déchets , Polluants chimiques de l'eau , Surveillance de l'environnement/méthodes , Éthiopie , Humains , Élimination des déchets/méthodes , Déchets solides/analyse , Installations d'élimination des déchets , Polluants chimiques de l'eau/analyse , Qualité de l'eauRÉSUMÉ
Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.
Sujet(s)
Fluorocarbones , Polluants chimiques de l'eau , Fluorocarbones/analyse , Humains , Sol , Eaux usées , Eau , Polluants chimiques de l'eau/analyseRÉSUMÉ
Appropriate solid waste management (SWM) strategies are necessary to avoid severe environmental and sanitary impacts, especially in low-income countries. Such strategies are most likely to succeed whether implementing actors are supported by scientific research. In this paper, the results of a collaboration between local authorities and researchers are presented and discussed that are the assessment of waste generation in the city of Quelimane (Mozambique), integrating existing and field-collected data and the design of a small-scale center for plastic sorting to complement the SWM system of the city. The center is expected to receive about 0.3-0.4 t/day of plastic waste (5%-7% of the overall amount of plastic waste daily produced in Quelimane). As long-term sustainability represents a typical issue, simplicity of operation was a leading principle in the design of the center; moreover, the design included a treatment plant (WWTP) for generated wastewater, whose management is usually neglected in such interventions. Among others, natural wastewater treatment (constructed wetlands) has been chosen for its affordability. Noteworthy, the so-conceived WWTP appears as a novelty in the scientific literature associated with small-scale plastic sorting plants. The system is designed to treat an average flow of 6 m3/day and consisted of a septic tank followed by a subsurface flow constructed wetland. Overall, the COD (chemical oxygen demand) and TSS (total suspended solids) removal higher than 80% and 90% were estimated, respectively. Based on this work, both the center and the WWTP were successfully realized, which are waiting to become operational. In the authors' opinion, the implemented procedure could become a reference for broader investigations and surveys. Supplementary Information: The online version contains supplementary material available at 10.1007/s42768-022-00091-6.
RÉSUMÉ
Petroleum hydrocarbons (PHs) are used as raw materials in many industries and primary energy sources. However, excessive PHs act as soil pollutants, posing serious threats to living organisms. Various ex-situ or in-situ chemical and biological methods are applied to restore polluted soil. However, most of the chemical treatment methods are expensive, environmentally unfriendly, and sometimes inefficient. That attracts scientists and researchers to develop and select new strategists to remediate polluted soil through risk-based analysis and eco-friendly manner. This review discusses the sources of PHs, properties, distribution, transport, and fate in the environment, internal and external factors affecting the soil remediation and restoration process, and its effective re-utilization for agriculture. Bioremediation is an eco-friendly method for degrading PHs, specifically by using microorganisms. Next-generation sequencing (NGS) technologies are being used to monitor contaminated sites. Currently, these new technologies have caused a paradigm shift by giving new insights into the microbially mediated biodegradation processes by targeting rRNA are discussed concisely. The recent development of risk-based management for soil contamination and its challenges and future perspectives are also discussed. Furthermore, nanotechnology seems very promising for effective soil remediation, but its success depends on its cost-effectiveness. This review paper suggests using bio-electrochemical systems that utilize electro-chemically active microorganisms to remediate and restore polluted soil with PHs that would be eco-friendlier and help tailor-made effective and sustainable remediation technologies.
Sujet(s)
Pétrole , Polluants du sol , Agriculture , Dépollution biologique de l'environnement , Hydrocarbures/métabolisme , Sol , Microbiologie du sol , Polluants du sol/analyseRÉSUMÉ
Chitosan is a natural fiber, chemically cellulose-like biopolymer, which is processed from chitin. Its use as a natural polymer is getting more attention because it is non-toxic, renewable, and biocompatible. However, its poor mechanical and thermal strength, particle size, and surface area restrict its industrial use. Consequently, to improve these properties, cellulose and/or inorganic nanoparticles have been used. This review discusses the recent progress of chitosan and cellulose composite materials, their preparation, and their applications in different industrial sectors. It also discusses the modification of chitosan and cellulose composite materials to allow their use on a large scale. Finally, the recent development of chitosan composite materials for drug delivery, food packaging, protective coatings, and wastewater treatment are discussed. The challenges and perspectives for future research are also considered. This review suggests that chitosan and cellulose nano-composite are promising, low-cost products for environmental remediation involving a simple production process.
Sujet(s)
Chitosane , Nanocomposites , Purification de l'eau , Matériaux biocompatibles , Cellulose , ChitineRÉSUMÉ
The Syrian civil war, which broke out in 2011, caused the displacement of more than one million refugees to Jordan. Most of them settled in the Northern Govenorates of Jordan. Due to this, the local services and infrastructures of the hosting communities, in particular the solid waste management (SWM), were put under great pressure. The aim of this study is to evaluate how the off-camp refugees impacted the SWM in the Greater Irbid Municipality (GIM; in the Irbid Governorate), both quantitatively and qualitatively. Data and results obtained from the studies carried out before the Syrian crisis are compared with data collected by the authors in 2016 using similar or comparable methodologies. Moreover, local citizen perceptions of and satisfaction with the solid waste (SW) service level were assessed. A deterioration of the SWM in GIM between 2011 and 2016 was observed in terms of service performance indicators (e.g., an increase of SW collection and transportation costs by 2.5 times and of fines for improper SW disposal by 2.2 times) and of citizens' views (a decline in SWM quality was felt by 59% of the respondents). An attempt to cope with this situation has been made in recent years with international donors mobilizing efforts and resources to enable municipalities to meet the growing demand in basic SW services. There is however, still much to be done.
Sujet(s)
Réfugiés , Élimination des déchets , Gestion des déchets , Humains , Jordanie , Déchets solides/analyseRÉSUMÉ
Waste electrical and electronic equipment (WEEE) represent one of the growing waste streams in Europe, whose content of hazardous substances and valuable materials focus on how it is handled. However, there are differences between countries regarding e-waste management system in Europe. This paper analyses and presents data regarding the e-waste management system in Italy, one of the founding countries of the EU and Serbia - EU candidate country. Within this work, the following aspects were considered: legislative framework and EU directive goals in terms of e-waste, institutional setup, collection system, and existing recycling and treatment technologies. In addition, material flow analysis is used to model mass balance within WEEE treatment plants in both countries. Finally, through assessment and comparison of current systems in both countries, problems and shortages of Serbia's e-waste management system are addressed.
Sujet(s)
Déchets électroniques , Gestion des déchets , Déchets électroniques/analyse , Électronique , Italie , Recyclage , SerbieRÉSUMÉ
Due to increasing anthropogenic activities, especially industry and transport, the fossil fuel demand and consumption have increased proportionally, causing serious environmental issues. This attracted researchers and scientists to develop new alternative energy sources. Therefore, this review covers the biofuel production potential and challenges related to various feedstocks and advances in process technologies. It has been concluded that the biofuels such as biodiesel, ethanol, bio-oil, syngas, Fischer-Tropsch H2, and methane produced from crop plant residues, micro- and macroalgae and other biomass wastes using thermo-bio-chemical processes are an eco-friendly route for an energy source. Biofuels production and their uses in industries and transportation considerably minimize fossil fuel dependence. Literature analysis showed that biofuels generated from energy crops and microalgae could be the most efficient and attractive process. Recent progress in the field of biofuels using genetic engineering has larger perspectives in commercial-scale production. However, its large-scale production is still challenging; hence, to resolve this problem, it is essential to convert biomass in biofuels by developing novel technology to increase biofuel production to fulfil the current and future energy demand.
Sujet(s)
Biocarburants , Microalgues , Biomasse , Ressources de production d'énergie , Combustibles fossilesRÉSUMÉ
Municipal solid waste (MSW) can pose a threat to public health if it is not safely managed. Despite prior research, uncertainties remain and refurbished evidence is needed along with new approaches. We conducted a systematic review of recently published literature to update and expand the epidemiological evidence on the association between MSW management practices and resident populations' health risks. Studies published from January 2005 to January 2020 were searched and reviewed following PRISMA guidelines. Eligible MSW treatment or disposal sites were defined as landfills, dumpsites, incinerators, waste open burning, transfer stations, recycling sites, composting plants, and anaerobic digesters. Occupational risks were not assessed. Health effects investigated included mortality, adverse birth and neonatal outcomes, cancer, respiratory conditions, gastroenteritis, vector-borne diseases, mental health conditions, and cardiovascular diseases. Studies reporting on human biomonitoring for exposure were eligible as well. Twenty-nine studies were identified that met the inclusion criteria of our protocol, assessing health effects only associated with proximity to landfills, incinerators, and dumpsites/open burning sites. There was some evidence of an increased risk of adverse birth and neonatal outcomes for residents near each type of MSW site. There was also some evidence of an increased risk of mortality, respiratory diseases, and negative mental health effects associated with residing near landfills. Additionally, there was some evidence of increased risk of mortality associated with residing near incinerators. However, in many cases, the evidence was inadequate to establish a strong relationship between a specific exposure and outcomes, and the studies rarely assessed new generation technologies. Evidence gaps remain, and recommendations for future research are discussed.
Sujet(s)
Élimination des déchets , Gestion des déchets , Humains , Incinération , Nouveau-né , Recyclage , Déchets solides , Installations d'élimination des déchetsRÉSUMÉ
The Circular Economy model is gaining attention as a key factor for boosting sustainable development. Reducing the consumption of raw materials, as well as increasing the amount of recycled waste, are the current challenges the municipal solid waste management system is called for. In this study, the evolution of the municipal waste management strategies in the city of Brescia was analysed, covering a period of 30 years. The results obtained by a) progressively extending the separate collection with street containers, b) building a Waste to Energy plant, and c) moving to a door to door collection system, were assessed via numerical indicators and mass balances. In order to highlight the complexity of the system, the waste flow, from collection to the achievement of the "end of waste" attribute, was followed. Separate collection with street containers came to a saturation percentage around 40%. The realization of the incineration plant eliminated the direct disposal of waste to landfills. With the introduction of the new collection system, the separately collected waste increased up to over 73%, the per capita amount of collected waste decreased from 685.3 kg/(in y) to 579.6 kg/(in y), and a significant reduction of recyclable materials in the unsorted waste was gained. In the paper, these achievements and their affecting factors are analysed. Moreover, criticalities in the calculation of material recovery indices due to the complexity of the system (72 transformation sites were identified) are discussed.
Sujet(s)
Élimination des déchets , Gestion des déchets , Villes , Italie , Déchets solidesRÉSUMÉ
Within the circular economy framework, our study aims to assess the rhamnolipid production from winery and olive oil residues as low-cost carbon sources by nonpathogenic strains. After evaluating various agricultural residues from those two sectors, Burkholderia thailandensis E264 was found to use the raw soluble fraction of nonfermented (white) grape marcs (NF), as the sole carbon and energy source, and simultaneously, reducing the surface tension to around 35 mN/m. Interestingly, this strain showed a rhamnolipid production up to 1070 mg/L (13.37 mg/g of NF), with a higher purity, on those grape marcs, predominately Rha-Rha C14-C14, in MSM medium. On olive oil residues, the rhamnolipid yield of using olive mill pomace (OMP) at 2% (w/v) was around 300 mg/L (15 mg/g of OMP) with a similar CMC of 500 mg/L. To the best of our knowledge, our study indicated for the first time that a nonpathogenic bacterium is able to produce long-chain rhamnolipids in MSM medium supplemented with winery residues, as sole carbon and energy source. KEY POINTS: ⢠Winery and olive oil residues are used for producing long-chain rhamnolipids (RLs). ⢠Both higher RL yields and purity were obtained on nonfermented grape marcs as substrates. ⢠Long-chain RLs revealed stabilities over a wide range of pH, temperatures, and salinities.
Sujet(s)
Olea , Minorités sexuelles , Vitis , Burkholderia , Glycolipides , Homosexualité masculine , Humains , Mâle , Pseudomonas aeruginosaRÉSUMÉ
The generation of huge amounts of food waste due to the increasing population is a serious global issue. The inadequate management of food waste and lack of proper handling approaches have created adverse negative impacts on the environment and the society. The use of traditional disposal (i.e. landfilling) and treatment (i.e. incineration and composting) methods are not considered to be efficient for managing food waste. Thus, anaerobic digestion (AD) has proven to be promising and cost-effective, as an alternative technology, for digesting and converting food waste into renewable energy and useful chemicals. However, mono-digestion of food waste suffers from process inhibition and instability which limit its efficiency. Adding biochar that has high buffering capacity and ensures optimum nutrient balance was shown to enhance biogas/methane production yields. This review reports on the physicochemical characteristics of food waste, the existing problems of food waste treatment in AD as well as the role of biochar amendments on the optimization of critical process parameters and its action mechanisms in AD, which could be a promising means of improving the AD performance. Also, this review provides insights regarding the selection of the desired/appropriate biochar characteristics, i.e. depending on the source of the feedstock and the pyrolysis temperature, and its role in enhancing biogas production and preventing the problem of process instability in the AD system. Finally, this review paper highlights the economic and environmental challenges as well as the future perspectives concerning the application of biochar amendments in AD.
Sujet(s)
Aliments , Élimination des déchets , Anaérobiose , Biocarburants , Bioréacteurs , Charbon de bois , MéthaneRÉSUMÉ
In the Italian authorization procedure for the construction of a landfill, the risk analysis (RA) is mandatory in case of request for derogation from the current legislation (Ministerial Decree (D.M.) 27 September 2010) in order to demonstrate that there is no risk for the environment. This paper describes the experience of the Province of Brescia, public body appointed for giving authorizations for new landfills, and its collaboration with the University of Brescia for the specific topic of RA applied to landfills. The research was undertaken because a lack of complete and specific indications about the application of such methodology to landfills has been identified. In particular, the province of Brescia faced the issue of verifying the proper application of such methodology in relevant cases. After referring to the legal and technical framework, including the current national legislation and a summary of the technical documents available for the topic (guidelines and instructions by technical bodies), the paper outlines the technical-preliminary approach applied by the Province of Brescia. This is complemented by a description of the methodological approach followed for RA for groundwater and for gaseous emissions, with a focus on biogas, together with the presentation of the results for three relevant case studies. The critical aspects that were faced and the proposal to overcome them, which are under discussion with the responsible bodies, are described as well.