Osmoprotectants play a major role in the Portulaca oleracea resistance to high levels of salinity stress-insights from a metabolomics and proteomics integrated approach.

Introduction: Purslane (Portulaca oleracea L.) is a non-conventional food plant used extensively in folk medicine and classified as a multipurpose plant species, serving as a source of features of direct importance to the agricultural and agri-industrial sectors. This species is considered a suitable model to study the mechanisms behind resistance to several abiotic stresses including salinity. The recently achieved technological developments in high-throughput biology opened a new window of opportunity to gain additional insights on purslane resistance to salinity stress-a complex, multigenic, and still not well-understood trait. Only a few reports on single-omics analysis (SOA) of purslane are available, and only one multi-omics integration (MOI) analysis exists so far integrating distinct omics platforms (transcriptomics and metabolomics) to characterize the response of purslane plants to salinity stress. Methods: The present study is a second step in building a robust database on the morpho-physiological and molecular responses purslane to salinity stress and its subsequent use in attempting to decode the genetics behind its resistance to this abiotic stress. Here, the characterization of the morpho-physiological responses of adult purslane plants to salinity stress and a metabolomics and proteomics integrative approach to study the changes at the molecular level in their leaves and roots is presented. Results and discussion: Adult plants of the B1 purslane accession lost approximately 50% of the fresh and dry weight (from shoots and roots) whensubmitted to very high salinity stress (2.0 g of NaCl/100 g of the substrate). The resistance to very high levels of salinity stress increases as the purslane plant matures, and most of the absorbed sodium remains in the roots, with only a part (~12%) reaching the shoots. Crystal-like structures, constituted mainly by Na+, Cl-, and K+, were found in the leaf veins and intercellular space near the stoma, indicating that this species has a mechanism of salt exclusion operating on the leaves, which has its role in salt tolerance. The MOI approach showed that 41 metabolites were statistically significant on the leaves and 65 metabolites on the roots of adult purslane plants. The combination of the mummichog algorithm and metabolomics database comparison revealed that the glycine, serine, and threonine, amino sugar and nucleotide sugar, and glycolysis/gluconeogenesis pathways were the most significantly enriched pathways when considering the total number of occurrences in the leaves (with 14, 13, and 13, respectively) and roots (all with eight) of adult plants; and that purslane plants employ the adaptive mechanism of osmoprotection to mitigate the negative effect of very high levels of salinity stress; and that this mechanism is prevalent in the leaves. The multi-omics database built by our group underwent a screen for salt-responsive genes, which are now under further characterization for their potential to promote resistance to salinity stress when heterologously overexpressed in salt-sensitive plants.

Multi-omics Analysis of Young Portulaca oleracea L. Plants' Responses to High NaCl Doses Reveals Insights into Pathways and Genes Responsive to Salinity Stress in this Halophyte Species.

Soil salinity is among the abiotic stressors that threaten agriculture the most, and purslane (Portulaca oleracea L.) is a dicot species adapted to inland salt desert and saline habitats that hyper accumulates salt and has high phytoremediation potential. Many researchers consider purslane a suitable model species to study the mechanisms of plant tolerance to drought and salt stresses. Here, a robust salinity stress protocol was developed and used to characterize the morphophysiological responses of young purslane plants to salinity stress; then, leaf tissue underwent characterization by distinct omics platforms to gain further insights into its response to very high salinity stress. The salinity stress protocol did generate different levels of stress by gradients of electrical conductivity at field capacity and water potential in the saturation extract of the substrate, and the morphological parameters indicated three distinct stress levels. As expected from a halophyte species, these plants remained alive under very high levels of salinity stress, showing salt crystal-like structures constituted mainly by Na+, Cl-, and K+ on and around closed stomata. A comprehensive and large-scale metabolome and transcriptome single and integrated analyses were then employed using leaf samples. The multi-omics integration (MOI) system analysis led to a data-set of 51 metabolic pathways with at least one enzyme and one metabolite differentially expressed due to salinity stress. These data sets (of genes and metabolites) are valuable for future studies aimed to deepen our knowledge on the mechanisms behind the high tolerance of this species to salinity stress. In conclusion, besides showing that this species applies salt exclusion already in young plants to support very high levels of salinity stress, the initial analysis of metabolites and transcripts data sets already give some insights into other salt tolerance mechanisms used by this species to support high levels of salinity stress. Supplementary Information: The online version contains supplementary material available at 10.1007/s43657-022-00061-2.

Synthesis of an organic-inorganic composite from calcium carbonate and Kraft lignin and its use as carrier material for controlled release of semiochemical agents.

The control of pests in agricultural systems is currently based on the widespread use of pesticides that efficiently control pests but have negative effects on the environment and humans. Thus, several studies have been conducted to develop alternative sustainable ways to control pests in agriculture. The use of semiochemicals presents a good alternative to develop a sustainable tool monitoring and control insect pests in crops areas. The dispensing carriers of semiochemicals are typically made of non-degradable material, often petroleum derivatives such as butyl rubber, that become polluting waste after application. To develop a biodegradable and low-cost dispenser for semiochemicals, particles of CaCO3 and a CaCO3/Kraft lignin composite were synthesized using CO2 bubbling, characterized and evaluated for 30 days as a dispenser of the limonene molecule, which is a common semiochemical in plants and also pheromone component is some insect species, such as the lesser mealworm Alphitobius diaperinus. Furthermore, limonene is volatile molecule that is easy to acquire and low-cost, which makes it an ideal semiochemical to evaluate the potential of the CaCO3 particles and CaCO3/Kraft lignin composite as a semiochemical dispenser for use in agriculture. The pure calcium carbonate I, pure calcium carbonate II, and composite I synthesized particles presented a larger specific surface area than the other composites. All the particles evaluated showed a slow limonene release rate between the 5th and 30th days evaluated, indicating the potential of these materials as pheromone dispensers. The composites with higher specific surface area, calcium carbonate II (19.5 m2/g) and composite I (23.1 m2/g), released a higher level of limonene during the 30 days evaluated.

Integration of metabolomics and transcriptomics data to further characterize Gliricidia sepium (Jacq.) Kunth under high salinity stress.

Soil salinity is one abiotic stress that threatens agriculture in more than 100 countries. Gliricidia [Gliricidia sepium (Jacq.) Kunth] is a multipurpose tree known for its ability to adapt to a wide range of soils; however, its tolerance limits and responses to salt stress are not yet well understood. In this study, after characterizing the morphophysiological responses of young gliricidia plants to salinity stress, leaf metabolic and transcription profiles were generated and submitted to single and integrated analyses. RNA from leaf samples were subjected to RNA sequencing using an Illumina HiSeq platform and the paired-end strategy. Polar and lipidic fractions from leaf samples were extracted and analyzed on an ultra-high-performance liquid chromatography (UHPLC) coupled with electrospray ionization quadrupole time-of-flight high-resolution mass spectrometry (MS) system. Acquired data were analyzed using the OmicsBox, XCMS Online, MetaboAnalyst, and Omics Fusion platforms. The substrate salinization protocol used allowed the identification of two distinct responses to salt stress: tolerance and adaptation. Single analysis on transcriptome and metabolome data sets led to a group of 5,672 transcripts and 107 metabolites differentially expressed in gliricidia leaves under salt stress. The phenylpropanoid biosynthesis was the most affected pathway, with 15 metabolites and three genes differentially expressed. Results showed that the differentially expressed metabolites and genes from this pathway affect mainly short-term salt stress (STS). The single analysis of the transcriptome identified 12 genes coding for proteins that might play a role in gliricidia response at both STS and long-term salt stress (LTS). Further studies are needed to reveal the mechanisms behind the adaptation response.

Elucidating how two different types of bleaching earths widely used in vegetable oils industry remove carotenes from palm oil: Equilibrium, kinetics and thermodynamic parameters.

This work compared the mechanisms of adsorption of carotenes from hybrid palm oil onto two kinds of bleaching earths widely used by industrial refiners (acid-activated and neutral). First, it was performed a deep characterization of adsorbent surfaces: acid activated adsorbent showed micropore volumes twice larger than the neutral. FTIR analysis of adsorbent after adsorption demonstrated that active site was Si-O-Si for both adsorbents. However, comparison of peak shapes suggested distinctive interactions between adsorbent/adsorbate for each adsorbent. Latterly, an extensive kinetic and equilibrium study was performed. Kinetic data were in accordance with pseudo-first and pseudo-second-order models. Adjusting to the intra-particle diffusion model evidenced more than one mechanism controlling the adsorption process. Equilibrium data demonstrated adsorption is only favorable at low carotene concentration at liquid phase for acid adsorbent (lower than 1 mg/mL). For neutral adsorbent, it was not clearly observed a favorable region with the studied conditions. The acid adsorbent could adsorb more carotenes per adsorbent weight than neutral. Finally, neutral adsorbent showed higher heterogeneity of interaction between adsorbate and adsorbent than the acid, especially at low adsorbent coverages.

A Survey on Synthesis Processes of Structured Materials for Biomedical Applications: Iron-based Magnetic Nanoparticles, Polymeric Materials and Polymerization Processes.

Magnetic materials based on iron oxides are extensively designed for several biomedical applications. Heterogeneous polymerization processes are powerful tools for the production of tailored micro-sized and nanosized magneto-polymeric particles. Although several polymerization processes have been adopted along the years, suspension, emulsion and miniemulsion systems deserve special attention due to its ability to produce spherical polymer particles containing magnetic nanoparticles homogeneously dispersed into the polymer thermoplastic matrices. The main objective of this paper is to review the main methods of synthesis of iron-based magnetic nanoparticles and to illustrate how typical polymerization processes in different dispersion medium can be successfully used to produce engineered magnetic core-shell structures. It is exemplified the use of suspension, emulsion and miniemulsion polymerization processes in order to support experimental methodologies required for the production of magnetic polymer particles intended for biomedical applications such as intravascular embolization treatments, drug delivery systems and hyperthermia treatment.

Low-energy-loss EFTEM imaging of thick particles and aggregates.

Electron spectroscopy imaging is a powerful tool for the elucidation of colloidal particle morphology and microchemistry, but it normally requires the use of very thin samples, typically less than 50 nm, to avoid the effects of multiple scattering. This work shows that many aspects of the internal morphology of thick particles and aggregates and the chemical component distribution are revealed using low-energy-loss electron imaging in the transmission electron microscope, benefiting from multiple scattering as well as small but significant differences in the low-energy-loss spectra of aggregate constituents. Low-loss images reveal morphological details of thick aggregates made out of colloidal polymers (natural rubber and styrene-acrylic latex) and inorganic particles (silica, montmorillonite, and aluminum phosphate) at a spatial resolution close to that achieved in the bright-field images and much better than in the elemental maps, showing the advantages of the simultaneous use of low-loss images and standard thin-cut elemental maps.