New Calamitic Mesogens Exhibiting Aggregation-Induced Emission (AIE).

Aggregation-induced emitters or AIEgens are generally signified by their stronger photoluminescence in aggregation than in the solution state. Due to high emission efficiency in aggregate and solid states and good processability, organic AIEgens drew attention to the development of advanced luminescent materials. However, as mesogenic materials self-assemble to a different molecular arrangement in different phases, achieving liquid crystallinity and AIE properties in the same molecule would provide a valuable tool to develop solvent-independent AIEgenic materials. With this goal, the present work reports the synthesis of new organic thermotropic liquid crystalline compounds exhibiting aggregation-induced emission (AIE). The synthesized compounds exhibit strong green luminescence in a solid state which sharply quenches upon entering smectic mesophase by heating. This is in addition to the exhibition of dispersion medium (solvent)-dependent emission, thus providing a dual mode of AIE. The mesogenic property of the synthesized compounds was studied by XRD, POM, and DSC. The AIE was studied by fluorescence spectroscopy and variable temperature fluorescence microscopy. A DFT study was carried out to gain an insight into the AIEgenic behavior of the material.

Biomimetic Cancer-Targeting Nanoplatform Boosting AIEgens-Based Photodynamic Therapy and Ferroptosis by Disrupting Redox-Homeostasis.

Photodynamic therapy (PDT) using aggregation-induced emission photosensitizer (AIE-PS) holds tremendous potential but is limited by its inherent disadvantages and the high concentrations of reduced glutathione (GSH) in tumor cells that can neutralize ROS to weaken PDT. Herein, we designed a nanodelivery system (CM-HSADSP@[PS-Sor]) in which albumin was utilized as a carrier for hydrophobic drug AIE-PS and Sorafenib, cross-linkers with disulfide bonds were introduced to form a nanogel core, and then cancer cell membranes were wrapped on its surface to confer homologous tumor targeting ability. A two-way strategy was employed to disturb redox-homeostasis through blocking GSH synthesis by Sorafenib and consuming excess GSH via abundant disulfide bonds, thereby promoting the depletion of GSH, which in turn increased the ROS levels in cancer cells to amplify the efficacy of ferroptosis and PDT, achieving an efficient in vivo antibreast cancer effect. This study brings a new strategy for ROS-based cancer therapy and expands the application of an albumin-based drug delivery system.

Catalytic hairpin assembly-based AIEgen/graphene oxide nanocomposite for fluorescence-enhanced and high-precision spatiotemporal imaging of microRNA in living cells.

The low abundance, heterogeneous expression, and temporal changes of miRNA in different cellular locations pose significant challenges for both the detection sensitivity of miRNA liquid biopsy and intracellular imaging. In this work, we report an intelligently assembled biosensor based on catalytic hairpin assembly (CHA) and aggregation-induced emission (AIE), named as catalytic hairpin aggregation-induced emission (CHAIE), for the ultrasensitive detection and intracellular imaging of miRNA-155. To achieve such goal, tetraphenylethylene-N3 (TPE-N3) is used as AIE luminogen (AIEgen), while graphene oxide is introduced to quench the fluorescence. When the target miRNA is present, CHA reaction is triggered, causing the AIEgen to self-assemble with the hairpin DNA. This will restrict the intramolecular rotation of the AIEgen and produce a strong AIE fluorescence. Interestingly, CHAIE does not require any enzyme or expensive thermal cycling equipment, and therefore provides a rapid detection. Under optimal conditions, the proposed biosensor can determine miRNA in the concentration range from 2 pM to 200 nM within 30 min, with the detection limit of 0.42 pM. The proposed CHAIE biosensor in this work offers a low background signal and high sensitivity, making it applicable for highly precise spatiotemporal imaging of target miRNA in living cells.

Luminogenic and Bactericidal Studies of an Acrylonitrile-Based AIEgen.

We have synthesized an aggregation-induced emissive molecule that exhibits promising photophysical characteristics. The aggregating aptitude is demonstrated by binary solvent mixture and it is emissive in both solution and solid state. The luminogenic characteristics are employed in creating fluorescent inks as well as for the detection of nitro antibiotics in biofluids and in solid support. Moreover, the acrylonitrile-based compound is bactericidal tested on E. coli and B. subtilis.

Fast and Stable Antibacterial Coating of Photosensitive Aggregation-Induced Emission Luminogens for Disinfection on Medical Devices.

Aggregation-induced emission luminogens (AIEgens) are promising photosensitizers that have exhibited excellent antibacterial ability with abundant reactive oxygen species (ROS) generation. TTCPy-PF6 and TTCPy-Br are deposited on the surface of diverse solid substrates through plasma-assistant electrostatic self-assembly. The AIEgens-covered coating can effectively eliminate different pathogenic Gram-positive (G+) bacteria and even their multidrug-resistant (MDR) mutants with negligible side effects such as cytotoxicity, hemolysis, and inflammation. Moreover, the AIEgen-coated surface can maintain high stability for long-time antibacterial usage, which is dependent on the ROS-mediated disruption of the attached bacteria. The AIEgen-based coatings with broad surface applicability have many advantages in high antibacterial ability, great biocompatibility, and low possibility of antibiotic pollution. The robust antibacterial ability and excellent biological safety of the AIEgen-based coatings would be helpful for the disinfection of medical devices.

PEGylated AIEgens for dual sensing of ATP and H2S and cancer cells photodynamic therapy.

Fluorescent sensors have been widely applied for biosensing, but probes for both multiple analytes sensing and photodynamic therapy (PDT) effect are less reported. In this article, we reported three AIE-based probes anchored with different mass-weight polyethylene glycol (PEG) tails, i.e., TPE-PEG160, TPE-PEG350, and TPE-PEG750, for both adenosine-5'-triphosphate (ATP) and hydrogen sulfide (H2S) detection and also cancer cells photodynamic therapy. TPE-PEGns (n = 160, 350 and 750) contain the tetraphenylethylene-based fluorophore core, the pyridinium and amide anion binding sites, the H2S cleavable disulfide bond, and the hydrophilic PEG chain. They exhibit a good amphiphilic property and can self-assemble nona-aggregation with a moderated red emission in an aqueous solution. Importantly, the size of aggregation, photophysical property, sensing ability and photosensitivity of these amphiphilic probes can be controlled by tuning the PEG chain length. Moreover, the selected probe TPE-PEG160 has been successfully used to detect environmental H2S and image ATP levels in living cells, and TPE-PEG750 has been used for photodynamic therapy of tumor cells under light irradiation.

Self-Assembled Nano-CT Contrast Agent Leveraging Size Aggregation for Improved In Vivo Tumor CT Imaging.

Computed tomography (CT) is a widely utilized noninvasive diagnostic tool in clinical practice. However, the commonly employed small molecular iodinated contrast agents (ICAs) in clinical CT imaging have limitations such as nonspecific distribution in body, rapid clearance through kidneys, etc., leading to a narrow imaging time window. In contrast, existing nano-sized ICAs face challenges like structural uncertainty, poor reproducibility, low iodine content, and uniformity issues. In this study, a novel approach is presented utilizing the aggregation-induced emission luminogen (AIEgen) to design and fabricate a kind of monocomponent nano-sized ICA (namely, BioDHU-CT NPs) that exhibits a unique aggregation effect upon activation. The small sized BioDHU-CT nanoparticles exhibit excellent tumor targeting capabilities and can release ICA modified with AIEgen with a high release efficiency up to 88.45%, under the activation of reactive oxygen species highly expressed in tumor regions. The released ICA performs in situ aggregation capability in the tumor region, which can enhance the retention efficiency of CT contrast agents, extending the imaging time window and improving the imaging quality in tumor regions.

Water soluble AIEgen-based thermosensitive and antibacterial hydroxypropyl chitin hydrogels for non-invasive visualization and wound healing.

Antimicrobial hydrogels containing antibacterial agents have been extensively studied for postoperative infections, wound repair and tissue engineering. However, the abuse of antibiotics has led to the enhancement of bacterial resistance and traditional antibacterial agents are losing their effect. Therefore, fabricating novel and efficient antibacterial hydrogels with enhanced photodynamic antimicrobial activity, good biocompatibility, biodegradability and injectability are highly desirable for clinical application. Herein, a fluorescent and sunlight-triggered synergetic antibacterial thermosensitive hydrogel (red fluorescent hydroxypropyl chitin, redFHPCH) is constructed based on a new water-soluble AIEgen (aggregation-induced emission fluorogen) covalently introduced in hydroxypropyl chitin for non-invasive visualization and wound healing. The thermosensitive redFHPCH solution showing good injectability with fluidity at low temperature was completely transformed into hydrogel under body temperature. The in vitro and in vivo visualization and reactive oxygen species (ROS) generation of the redFHPCH hydrogel are demonstrated clearly because of its excellent AIE fluorescence imaging quality in the red/near-infrared region and superefficient ROS production by sunlight. Moreover, the redFHPCH hydrogel with positively charged quaternary ammonium groups displays a strong synergistic antibacterial effect for healing of infected wound under sunlight irradiation. We believe that this novel strategy can open a new door to explore diversified and multifunctional hydrogels for clinical application.

AIEgen-Based Covalent Organic Frameworks for Preventing Malignant Ventricular Arrhythmias Via Local Hyperthermia Therapy.

The engineering of aggregation-induced emission luminogens (AIEgen) based covalent organic frameworks (COFs), TDTA-COF, BTDTA-COF, and BTDBETA-COF are reported, as hyperthermia agents for inhibiting the occurrence of malignant ventricular arrhythmias (VAs). These AIE COFs exhibit dual functionality, as they not only directly modulate the function and neural activity of stellate ganglion (SG) through local hyperthermia therapy (LHT) but also induce the browning of white fat and improve the neuroinflammation peri-SG microenvironment, which is favorable for inhibiting ischemia-induced VAs. In vivo studies have confirmed that BTDBETA-COF-mediated LHT enhances thermogenesis and browning-related gene expression, thereby serving a synergistic role in combating VAs. Transcriptome analysis of peri-SG adipose tissue reveals a substantial downregulation of inflammatory cytokines, highlighting the potency of BTDBETA-COF-mediated LHT in ameliorating the neuroinflammation peri-SG microenvironment and offering myocardial and arrhythmia protection. The work on AIE COF-based hyperthermia agent for VAs inhibition provides a new avenue for mitigating cardiac sympathetic nerve hyperactivity.

Synthesis and Characterization of Tetraphenylethene AIEgen-Based Push-Pull Chromophores for Photothermal Applications: Could the Cycloaddition-Retroelectrocyclization Click Reaction Make Any Molecule Photothermally Active?

Three new tetraphenylethene (TPE) push-pull chromophores exhibiting strong intramolecular charge transfer (ICT) are described. They were obtained via [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) click reactions on an electron-rich alkyne-tetrafunctionalized TPE (TPE-alkyne) using both 1,1,2,2-tetracyanoethene (TCNE), 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) as electron-deficient alkenes. Only the starting TPE-alkyne displayed significant AIE behavior, whereas for TPE-TCNE, a faint effect was observed, and for TPE-TCNQ and TPE-F4-TCNQ, no fluorescence was observed in any conditions. The main ICT bands that dominate the UV-Visible absorption spectra underwent a pronounced red-shift beyond the near-infrared (NIR) region for TPE-F4-TCNQ. Based on TD-DFT calculations, it was shown that the ICT character shown by the compounds exclusively originated from the clicked moieties independently of the nature of the central molecular platform. Photothermal (PT) studies conducted on both TPE-TCNQ and TPE-F4-TCNQ in the solid state revealed excellent properties, especially for TPE-F4-TCNQ. These results indicated that CA-RE reaction of TCNQ or F4-TCNQ with donor-substituted are promising candidates for PT applications.

Promoting the healing of methicillin-resistant Staphylococcus aureus-infected wound by a multi-target antimicrobial AIEgen of 6-Aza-2-thiothymine-decorated gold nanoclusters.

The use of conventional antibiotic therapies is in question owing to the emergence of drug-resistant pathogenic bacteria. Therefore, novel, highly efficient antibacterial agents to effectively overcome resistant bacteria are urgently needed. Accordingly, in this work, we described a novel class luminogen of 6-Aza-2-thiothymine-decorated gold nanoclusters (ATT-AuNCs) with aggregation-induced emission property that possessed potent antimicrobial activity against methicillin-resistant Staphylococcus aureus (MRSA). Scanning electron microscopy was performed to investigate the interactions between ATT-AuNCs and MRSA. In addition, ATT-AuNCs exhibited excellent ROS generation efficiency and could effectively ablate MRSA via their internalization to the cells. Finally, tandem mass tag-labeling proteome analysis was carried out to investigate the differential expression proteins in MRSA strains. The results suggested that ATT-AuNCs killed MRSA cells through altering the expression of multiple target proteins involved in DNA replication, aminoacyl-tRNA synthesis, peptidoglycan and arginine biosynthesis metabolism. Parallel reaction monitoring technique was further used for the validation of these proteome results. ATT-AuNCs could also be served as a wound-healing agent and accelerate the healing process. Overall, we proposed ATT-AuNCs could serve as a robust antimicrobial aggregation-induced emission luminogen (AIEgen) that shows the ability to alter the activities of multiple targets for the elimination of drug-resistant bacteria.

Autophagy-Activated Self-reporting Photosensitizer Promoting Cell Mortality in Cancer Starvation Therapy.

Cancer starvation therapy have received continuous attention as an efficient method to fight against wide-spectrum cancer. However, during cancer starvation therapy, the protective autophagy promotes cancer cells survival, compromising the therapeutic effect. Herein, a novel strategy by combination of autophagy-activated fluorescent photosensitizers (PSs) and cancer starvation therapy to realize the controllable and efficient ablation of tumor is conceived. Two dual-emissive self-reporting aggregation-induced emission luminogens (AIEgens), TPAQ and TPAP, with autophagy-activated reactive oxygen species (ROS) generation are prepared to fight against the protective autophagy in cancer starvation therapy. When protective autophagy occurs, a portion of TPAQ and TPAP will translocate from lipid droplets to acidic lysosomes with significant redshift in fluorescence emission and enhanced ROS generation ability. The accumulation of ROS induced by TPAQ-H and TPAP-H causes lysosomal membrane permeabilization (LMP), which further results in cell apoptosis and promotes cell death. In addition, TPAQ and TPAP can enable the real-time self-reporting to cell autophagy and cell death process by observing the change of red-emissive fluorescence signals. Particularly, the efficient ablation of tumor via the combination of cancer starvation therapy and photodynamic therapy (PDT) induced by TPAQ has been successfully confirmed in 3D tumor spheroid chip, suggesting the validation of this strategy.

Effects of Halogenation on Quinoline-Malononitrile-based AIEgens: Photophysical Properties Investigation and Wash-Free Imaging.

Developing halogen-functionalized fluorescent dyes with intriguing photophysical properties, including enhanced photostability, is particularly important for bioimaging. In this work, we synthesized two new halogen-functionalized aggregation-induced emission (AIE)-active molecules, DQMF-OH and DQMCl-OH, based on the quinoline-malononitrile chromophore. The halogen effect on the photophysical characteristics was detailedly studied by absorption and fluorescence spectroscopy, density functional theory calculations, and crystal structures. Compared with non-halogen substituted AIE luminogen (AIEgen) DQM-OH, the halogen substituted DQMF-OH and DQMCl-OH exhibited red-shifted absorptions and emissions in the solution and solid state. In addition, DQMF-OH and DQMCl-OH also possessed enhanced fluorescence toward viscosity changes. These AIEgens served as remarkable imaging tools for cell tracking in a wash-free manner. Furthermore, DQMF-OH and DQMCl-OH showed much more excellent photobleaching resistance than DQM-OH. Our work sheds new light on developing fluorescent halogenated dyes with enhanced photophysical performances for biological applications.

Quinoline-Malononitrile-Based Aggregation-Induced Emission Probe for Monoamine Oxidase Detection in Living Cells.

A quinoline-malononitrile (QM)-based aggregation-induced emission probe was developed to detect MAOs in cells through an enzymatic reaction followed by ß-elimination. After being incubated at 37 °C, QM-NH2 responded to the MAO enzymes with great specificity and within just 5 min. This 5 min responsive mechanism was fast, with the limit of detection (LOD) at 5.49 and 4.76 µg mL-1 for MAO-A and MAO-B, respectively. Moreover, QM-NH2 displayed high enzyme specificity even in the presence of high concentrations of biological interferences, such as oxidizing and reducing agents, biothiols, amino acids, and glucose. Furthermore, QM-NH2 demonstrated biocompatibility as the cells retained more than 70% viability when exposed to QM-NH2 at concentrations of up to 20 µM. As a result, QM-NH2 was used to detect MAO-A and MAO-B in SH-SY5Y and HepG2 cells, respectively. After 1h incubation with QM-NH2, the cells exhibited enhanced fluorescence by about 20-fold. Moreover, the signal from cells was reduced when MAO inhibitors were applied prior to incubating with QM-NH2. Therefore, our research recommends using a QM probe as a generic method for producing recognition moieties for fluorogenic enzyme probes.

Designs and Applications of Multi-stimuli Responsive FRET Processes in AIEgen-Functionalized and Bi-fluorophoric Supramolecular Materials.

Materials capable of displaying strong ratiometric fluorescence with Förster resonance energy transfer (FRET) processes have attracted much research interest because of various chemosensor and biomedical applications. This review highlights several popular strategies in designing FRET-OFF/ON mechanisms of ratiometric fluorescence systems. In particular, the developments of organic and polymeric FRET materials featuring aggregation-induced emission-based luminogens (AIEgens), supramolecular assemblies, photochromic molecular switches and surfactant-induced AIE/FRET mechanisms are presented. AIEgens have been frequently employed as FRET donor and/or acceptor fluorophores to obtain enhanced ratiometric fluorescences in solution and solid states. Since AIE effects and FRET processes rely on controllable distances between fluorophores, many interesting fluorescent properties can be designed by regulating aggregation states in polymers and supramolecular systems. Photo-switchable fluorophores, such as spiropyran and diarylethene, provide drastic changes in fluorescence spectra upon photo-induced isomerizations, leading to photo-switching mechanisms to activate/deactivate FRET processes. Supramolecular assemblies offer versatile platforms to regulate responsive FRET processes effectively. In rotaxane structures, the donor-acceptor distance and FRET efficiency can be tuned by acid/base-controlled shuttling of the macrocycle component. The tunable supramolecular interactions are strongly influenced by external factors (such as pH values, temperatures, analytes, surfactants, UV-visible lights, etc.), which induce the assembly and disassembly of host-guest systems and thus their FRET-ON/FRET-OFF behavior. In addition, the changes in donor or acceptor fluorescence profiles upon detections of analytes can also sufficiently alter the FRET behavior and result in different ratiometric fluorescence outputs. The strategies and examples provided in this review offer the insights and toolkits for future FRET-based material developments.

Updates on fluorescent probes and open-field imaging methods for fluorescence-guided cytoreductive surgery for epithelial ovarian cancer: A review.

Fluorescence-guided surgery has emerged as a promising imaging technique for real-time intraoperative tumour delineation and visualisation of submillimetre tumour masses in cytoreductive surgery for epithelial ovarian cancer (EOC). Researchers have developed several EOC-targeted fluorescent probes, most of which are currently in the preclinical stage. Interestingly, imaging devices designed for open surgery are proof of concept. This review summarises the recent advances in EOC-targeted fluorescent probes and open-field fluorescence imaging strategies and discusses the challenges and potential solutions for clinical translation.

Fast and Reversibly Humidity-Responsive Fluorescence Based on AIEgen Proton Transfer.

The construction of humidity-responsive fluorescent materials with reversibility, specificity, and sensitivity is of great importance for the development of information encryption, fluorescence patterning, and sensors. Nevertheless, to date, the application of these materials has been limited by their slow response rate and nonspecificity. Herein, a humidity-responsive fluorescence system was designed and assembled to achieve a rapid, reversible, and specific moisture response. The system comprised tetra-(4-pyridylphenyl)ethylene (TPE-4Py) as a fluorescent proton acceptor with an aggregation-induced emission (AIE) effect and poly(acrylic acid) (PAA) as a proton donor with an efficient moisture-capturing ability. The fluorescence color and intensity rapidly changed with increasing relative humidity (RH) because of TPE-4Py protonation, and TPE-4Py deprotonation resulted in recovery of the original fluorescence color in low-humidity environments. The proton transfer between the pyridyl group in TPE-4Py and the carboxyl group in PAA was reversible and chemically stable, and the humidity-responsive fluorescence system showed a high response/recovery speed, an obvious color change, good reversibility, and an outstanding specific moisture response. Because of these advantages, diverse applications of this humidity-responsive fluorescence system in transient fluorescent patterning and the encryption of information were also developed and demonstrated.

Breaching Bacterial Biofilm Barriers: Efficient Combinatorial Theranostics for Multidrug-Resistant Bacterial Biofilms with a Novel Penetration-Enhanced AIEgen Probe.

The formation of microbial biofilms is acknowledged as a major virulence factor in a range of persistent local infections. Failures to remove biofilms with antibiotics foster the emergence of antibiotic-resistant bacteria and result in chronic infections. As a result, the construction of effective biofilm-inhibiting and biofilm-eradicating chemicals is urgently required. Herein, we designed a water-soluble probe APDIS for membrane-active fluorescence and broad-spectrum antimicrobial actions, particularly against methicillin-resistant Staphylococcus aureus (MRSA), which shows multidrug resistance. In vitro and in vivo experiments demonstrate its high antibacterial effects comparable to vancomycin. Furthermore, it inhibits biofilm formation by effectively killing planktonic bacteria at low inhibitory concentrations, without toxicity to mammalian cells. More importantly, this probe can efficiently penetrate through biofilm barriers and exterminate bacteria that are enclosed within biofilms and startle existing biofilms. In the mouse model of implant-related biofilm infections, this probe exhibits strong antibiofilm activity against MRSA biofilms, thus providing a novel theranostic strategy to disrupt biofilms in vivo effectively. Our results indicate that this probe has the potential to be used for the development of a combinatorial theranostic platform with synergistic enhanced effects for the treatment of multidrug-resistant bacterial infections and antibiofilm medications.

Combined Skeleton and Spatial Rigidification of AIEgens in 2D Covalent Organic Frameworks for Boosted Fluorescence Emission and Sensing of Antibiotics.

AIEgens show relatively weak fluorescence performance owing to the existence of π-π interlayer accumulation, molecular layer planarization, and intramolecular rotation in aggregation-induced emission (AIE) molecules, which limit its application scope. Herein, we put forward a combined skeleton and spatial rigidification method to boost the fluorescence emission efficiency of AIEgens. As a proof-of-concept experiment, two highly fluorescent covalent organic frameworks (COFs) were designed and constructed by the Knoevenagel condensation reaction. The experimental results show that the combined skeleton and spatial rigidification endowed excellent fluorescence emission for the resulting F-COF-2 by destruction of the π-π interlayer accumulation, interference of the molecular layer planarization, and restriction of the intramolecular rotation of the AIEgen unit. F-COF-2 displayed highly sensitive and selective NFT and NZF detection. Particularly, the Ksv value and limit of detection of F-COF-2 toward NFT were estimated to be 9.12 × 105 M-1 and 3.35 ppb, respectively, which surpassed all the reported crystalline porous fluorescent materials. The mechanism study proved that its outstanding fluorescence detection property was ascribed to the formation of a nonfluorescent complex induced by hydrogen bond interactions and electron transfer between F-COF-2 and NFT and NZF. This work not only proposes a combined skeleton and spatial rigidification strategy to improve the fluorescence efficiency of AIE molecules but also develops a sensor with high fluorescence efficiency, high chemical stability, and highly efficient detection of antibiotics.

Protease-Responsive Peptide-Conjugated Mitochondrial-Targeting AIEgens for Selective Imaging and Inhibition of SARS-CoV-2-Infected Cells.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a serious threat to human health and lacks an effective treatment. There is an urgent need for both real-time tracking and precise treatment of the SARS-CoV-2-infected cells to mitigate and ultimately prevent viral transmission. However, selective triggering and tracking of the therapeutic process in the infected cells remains challenging. Here, we report a main protease (Mpro)-responsive, mitochondrial-targeting, and modular-peptide-conjugated probe (PSGMR) for selective imaging and inhibition of SARS-CoV-2-infected cells via enzyme-instructed self-assembly and aggregation-induced emission (AIE) effect. The amphiphilic PSGMR was constructed with tunable structure and responsive efficiency and validated with recombinant proteins, cells transfected with Mpro plasmid or infected by SARS-CoV-2, and a Mpro inhibitor. By rational construction of AIE luminogen (AIEgen) with modular peptides and Mpro, we verified that the cleavage of PSGMR yielded gradual aggregation with bright fluorescence and enhanced cytotoxicity to induce mitochondrial interference of the infected cells. This strategy may have value for selective detection and treatment of SARS-CoV-2-infected cells.