Investigation of four nickel titanium endodontic instruments, with cyclic fatigue resistance, scanning electron microscopy, and energy dispersive x-ray spectroscopy.

The aim of this study was to compare of four different nickel-titanium (Ni-Ti) endodontic files and evaluate in terms of cyclic fatigue resistance and metallurgical properties. Four different type Ni-Ti root canal files Protaper Next X2 (PTN) (Dentsply Maillefer, Ballaigues, Switzerland), One Curve (OC) #25.06 (Micro Mega, Besancon, France), EndoPlus Flex Plus Gold X2 (EPG) (Turkuaz Dental, Denizli, Turkey), and EndoPlus Flex Plus Blue #25.06 (EPB) (Turkuaz Dental, Denizli, Turkey) files were tested for cyclic fatigue resistance (n = 20). During experiments artificial zirconia block canal was used. The artificial canal designed with curvature 60° and 5-mm radius. The number of cyclic to fracture (NCF) was noted. Fractured length (FL) parts of Ni-Ti files were recorded to assessment of fracture volumetric point. All fractured surfaces of Ni-Ti files were assessed by scanning electron microscope (SEM) to confirm the type of fractures. Descriptive evaluation become accomplished for the fundamental composition of units with the aid of using energy-dispersive x-ray spectroscopy (EDX). NCF data were evaluated via Bonferroni test with post hoc multiple comparison method. OC showed the highest NCF values (p < .05). The standardization of the study was confirmed as the FL of files was statistically similar in length (p > .05). SEM analysis confirmed that all scanned samples were fractured due to cyclic fatigue. EDX analysis confirmed that EPB established the poorest Ni content file. RESEARCH HIGHLIGHTS: The cyclic fatigue-related failure of One Curve was significantly more resistant than Protaper Next and EndoPlus files. Scanning electron microscopy images showed that One Curve and Protaper Next have round tips Energy dispersive x-ray spectroscopy showed that all four endodontic instruments mainly have Nickel and Titanium elements.

Comparative evaluation of the effects of different torque settings on dentinal crack formation using single- and multi-file system: An in vitro study.

Context: To improve efficiency, biomechanical preparation in root canal treatment is shifting from manual SS to nickel-titanium (NiTi) rotary devices. While multi-file NiTi systems entail crack and fracture issues, modern single-file systems address these concerns. Aims: The aim of this study was to evaluate and compare the effects of different torque settings on dentinal crack formation using single-file systems (SFS) (One Curve [OC]) and multi-file systems (ProTaper Next [PTN]) at different levels of the tooth. Subjects and Methods: The study was conducted on 45 freshly extracted human mandibular premolars divided into groups: OC at minimal and maximal torque, PTN at minimal and maximal torque, and a control group. After canal preparation, teeth were horizontally sectioned at 3, 6, and 9 mm from the apex, and then examined for cracks using a stereomicroscope. Statistical Analysis Used: This was analyzed using Chi-square test. Results: PTN group: Highest crack rates at the middle (55.6%) and apical (77.8%) thirds with maximum torque; OC group: Highest rates at the middle (22.2%) with minimal torque and apical (11.1%) with maximum torque. Conclusions: Maximal torque settings had more incidence of cracks compared to minimal torque settings. It can be stated that SFS (OC) produced less cracks compared to multi-file system (PTN) at both minimal and maximal torque settings.

A Comparative Evaluation of the Efficiencies of Different Rotary File Systems in Terms of Remaining Dentin Thickness Using Cone Beam Computed Tomography: An In Vitro Study.

AIM: The aim of this study was to evaluate and compare the dentin thickness of the mesio-buccal canal of the lower first molar after canal preparation with three different rotary file systems using cone beam computed tomography (CBCT). METHODOLOGY: TruNatomy (Dentsply Sirona, USA), 2Shape (Micro-Mega, France), and One Curve (Micro-Mega, France) were the three different rotary files that were employed. A total of 45 excised human permanent first mandibular molars were divided into Groups A (TruNatomy), B (2Shape), and C (One Curve) at random. To measure the residual dentin thickness at 3 mm, 5 mm, and 7 mm from the radiographic apex, the mesial root of the tooth was removed from the tooth, and a mesio-buccal canal was taken. Samples were mounted in clear acrylic resin and were subjected to a pre-instrumentation CBCT scan. The mesio-buccal canal was cleaned and shaped while maintaining the final mesio-buccal canal preparation of Group A - 26/0.04, Group B - 25/0.04, and Group C - 25/0.04. The samples were extensively irrigated with 3% sodium hypochlorite and 17% EDTA, and a post-instrumentation scan was performed on them. Statistics were used to determine the values from CBCT scans that were recorded for pre- and post-instrumentations. RESULTS: The results showed that Group A had the greatest drop in dentin thickness, followed by Group B and Group C. The change in dentin thickness was greatest at 3 mm and 7 mm. CONCLUSION: In contrast to TruNatomy and 2Shape rotary file systems, One Curve has the advantage of maintaining a tooth's thickness at 3 and 7 millimeters from the radiological apex. Since the TruNatomy file system removes more dentin than the other two combined, it should be used cautiously. Choosing the right instrument is crucial for cleaning and shaping during root canal preparation.

Comparative evaluation of stress distribution against the root canal wall at three different levels using novel NiTi rotary files - A finite element analysis.

Background: Recent innovations in the physical and mechanical features of endodontic file systems have diminished the prospect of stress generation and fracture risk in novel endodontic files. Aim: The purpose of this research was to comparatively evaluate the stress distribution of recently introduced endodontic rotary files with distinct features and metallurgy at three different levels of the root canal wall by finite element analysis. Materials and Methods: Forty endodontic files were used in this experiment after being inspected through a scanning electron microscope for any surface deformities. Based on their metallurgy and design, the scanned files were divided into four groups, each with 10 samples: Group A-2Shape files, Group B-F360, Group C-One Curve, and Group D-TruNatomy. To assess the mechanical behavior of these files, the stress produced by computer-aided models of these instruments on the dentinal wall of a simulated root canal was numerically analyzed using ANSYS® 15 Workbench finite element software. Results: A one-way ANOVA was used to assess all the raw data with post hoc Tukey analysis, the Shapiro-Wilk test, and Levene's test. F360 files exerted the maximum stress on the dentinal wall, while TruNatomy files exerted the least stress at all the distinct levels of dentinal walls. Conclusions: There was no statistically significant variation in the stress generated between the four groups. Therefore, it can be concluded that improvements in rotary file design and metallurgy have the potential to reduce the stress during canal shaping and the risk of instrument breakage during clinical use.

Apical extrusion of debris when using OneCurve, ProTaper Next and TruNatomy in curved canals.

BACKGROUND: The extrusion of apical debris is related to various factors, and may be affected by variations in technique or instrumentation system. Although the extrusion cannot be completely prevented, it is crucial to minimize the amount of extruded material. OBJECTIVES: The present study aimed to compare apical debris extrusion by the novel TruNatomy (TRN), OneCurve (OC) and ProTaper Next (PTN) instruments in curved root canals. MATERIAL AND METHODS: A total of 60 multi-rooted human mandibular molar teeth with moderate and severe curvature were selected and randomly divided into 3 groups. The root canals were prepared with the OC, TRN and PTN files. For collecting the debris extruded through the apical foramen, Eppendorf tubes were used. After the vaporizing period, the tubes were re-weighed, and the amount of the extruded debris was calculated by subtracting the initial weight from the final weight. Statistical analysis was performed with the Shapiro-Wilk and Kruskal-Wallis tests. The statistical significance level was set at p < 0.05. RESULTS: The least amount of debris was extruded with TRN and the greatest with PTN, but the difference between the groups was not significant (p = 0.257). CONCLUSIONS: All instrumentation systems were associated with debris extrusion. The tested file systems presented similar results in terms of apical debris extrusion in curved canals. The novel TRN system demonstrated promising results, comparable to OC and PTN.

The effect of different kinematics on apical debris extrusion with a single-file system.

To compare the amount of extruded debris caused by different motions using a single-file system. Fifty mandibular first molar teeth were randomized into 5 groups (n = 10) according to the motion tested: Optimize Torque Reverse (OTR), TF Adaptive Motion (TFA), continuous rotation (CR), reciprocation motion (+ 150°, -30°) (REC), and Jeni motion (Jeni). One Curve single file 25/06 (Micro-Mega, Besançon, France) was used in all experimental groups. The root canals were irrigated with 2.5% NaOCl, and the extruded debris were collected at pre-weighted glass vials. The glass vials were kept inside an incubator for one week at 70 °C to dry out the irrigating solution. The extruded debris was quantified by subtracting the pre-instrumentation from the post-instrumentation weight of the glass vials. The time required for each instrumentation procedure was digitally recorded. All data were analyzed statistically with one way ANOVA and post hoc Tukey test (P < 0.05). All the motions extruded apically debris with Jeni mode caused significantly less debris extrusion than TFA, REC, and CR (P < 0.05) while no significant difference emerged with OTR. Preparation time was not significantly different in all groups. Within the limits of the present study, all the kinematics produced apically debris extrusion, with Jeni reporting a similar amount of debris compared with OTR and significantly less than TFA, REC, and CR. Preparation time was similar among the tested kinematics.

Negotiating the second mesiobuccal canal: A comparison of nickel titanium files through the experience of undergraduate dental students.

OBJECTIVES: The aim of this study was to compare the ability of undergraduate students to reach working length (WL) in second mesiobuccal root canals (MB2) of maxillary first molars (n = 210) by using Reciproc Blue without glide path preparation, and One Curve with glide path preparation. METHODS: The students (n = 105) attended theoretical and practical courses. The first group (n = 53) shaped MB2 root canals using the One Curve system and then Reciproc Blue; the second group (n = 52) shaped MB2 root canals following the reverse sequence. Participants completed a questionnaire. The chi-square and Mann-Whitney U test were used for statistical analysis using significance of p < 0.05. RESULTS: The full WL was reached and shaping procedures were completed without complications in Reciproc Blue and One Curve groups at rates of 86.67% and 82.85%, respectively (p > 0.05). Treatment time was shorter in Reciproc Blue (p < 0.05). More (62.9%) students felt the One Curve system safer, while 61% felt the Reciproc Blue system faster. CONCLUSIONS: Within the limitations of this study, instrument kinematics and glide path preparation did not interfere with undergraduate students' ability to achieve the WL in MB2 root canals.

Effect of contracted endodontic access cavity and root canal preparation by One Curve on danger zone of mesial root canal in mandibular first molars / 口腔疾病防治

Objective @#To explore the influence of a contracted endodontic access cavity on the risk of canal transportation in the danger zone of the mesial root canal of mandibular first molars (MFMs) using a one-curve preparation system, and to provide an experimental basis for the clinical selection of a better pulp approach.@*Methods@#Twenty MFMs extracted for severe periodontal disease that met the inclusion criteria, including intact coronal roots, mesial roots with two separate root canals, mesiobuccal canal (MB) and mesiolingual canal (ML), and a curvature of 0° to 20°, were selected. Subsequently, these MFMs were randomly divided into two groups based on the endodontic access design, including the traditional endodontic access cavity (TEC) group and the contracted endodontic access cavity (CEC) group. In the TEC group, the pulp chamber roof of the tooth was completely removed, while in the CEC group, the pulp chamber roof and peri-cervical dentin were preserved as much as possible. Then, the One Curve single file was adopted to conduct root canal preparation. Next, cone beam computed tomography (CBCT) was performed on extracted teeth before and after preparation, and the measurement sections were located at 0-7.0 mm below the root bifurcation of the mesial root canal at 1 mm intervals. The minimum wall thickness on the mesial and distal aspect of the root canal was measured in each section.@* Results @# ① Prepreparation CT measurements of 20 MFMs showed that the danger zone in the range 0-4 mm under root bifurcation, a mean thickness of 1.18 mm on the mesial aspect of the MB root canal and 1.08 mm on the distal aspect. The mean thickness of the ML root canal was 1.28 mm on the mesial aspect and 1.07 mm on the distal aspect. ② Compared with that of the traditional endodontic access cavity, no significant difference in the decrease of wall thickness was observed in the danger zone of mesial root canal of MFMs in the contracted endodontic access cavity (t = 1.319，P = 0.19). ③ In the mesiobuccal canal, compared with the apical transportation of the traditional endodontic access cavity, which tends to be more mesial side, the apical transportation of contracted endodontic access cavity tends to the distal side. In the mesiolingual canal, both apical transportation groups tended to be on the distal side. @*Conclusion @# When using the One Curve file, compared with traditional endodontic access, the contracted endodontic access cavity based on the minimally invasive concept does not increase the risk that the mesial root canal of mandibular first molars is transported.

Biofilm elimination from infected root canals using four different single files.

INTRODUCTION: Enterococcus faecalis (E. faecalis) is the most commonly isolated bacterium from infected root canals. It is found in the form of a biofilm, which makes it more resistant to antimicrobials, and requires optimal chemomechanical strategies to maximize root canal disinfection. AIM: To evaluate the efficacy of 4 different endodontic file systems against E. faecalis biofilm growth in root canals using colony-forming units per milliliter (CFU/mL) and scanning electron microscope (SEM). METHODS: Eighty-five extracted human mandibular premolars with straight root canals and apical diameters not larger than the #15 K-file were randomly selected. After performing a pilot study (n = 15) to determine the ideal incubation period for E. faecalis biofilm development, sixty-five root canals were infected with E. faecalis, incubated for 3 weeks, and then mechanically prepared using one of four single files (XP-endo Shaper, Hyflex EDM, One Curve, and Fanta. AFTM F One) (n = 15). Five infected root canals were excluded for the positive control. Five non-contaminated root canals were included for the negative control. Samples were collected using sterile paper points pre- and post-instrumentation to determine the bacterial load (CFU/mL). Root canals from each group were topographically evaluated at the coronal, middle, and apical segments using scanning electron microscope (SEM). Bacterial reduction data were estimated and statistically analyzed by Kruskal-Wallis and Mann-Whitney U tests (post hoc test) (P ≤ .05). RESULTS: XP-endo Shaper, Hyflex DEM, and One Curve significantly could eradicate E. faecalis biofilms in infected root canals with no significant difference among them compared to Fanta. AF™ F One. CONCLUSION: None of the systems were capable of completely eliminating biofilms. XP-endo Shaper, Hyflex EDM, and One Curve mechanically eliminated E. faecalis biofilms compared to Fanta. AF™ F One from infected root canals.

Shaping Ability of Reciproc Blue Versus One Curve in Curved Canal: An In-Vitro Study.

The introduction of nickel-titanium (NiTi) rotary instruments improved the root canal preparation of the narrow and curved root canals, especially after the introduction of thermomechanical treated (NiTi) alloys that have a high flexibility to prepare the curved canal reducing the common clinical complication, such as fracture, the change of the original shape of the root canal as a result of the change in the curvature of the curved root canal, the change of the working length which caused by the creation of the ledges, canal transporting and zipping especially in medium and highly curved canal. This study aimed to compare the shaping ability of two heat-treated nickel-titanium single file systems using reciprocation motion and rotary motion in curved canals. Materials and methods Thirty extracted human teeth with one curved root at 25 to 56 degrees were used, two NiTi single file systems were used to prepare the curved root canal in two groups: Reciproc R25 (Munich, Germany: VDW) group (n=15) and One Curve (Besancon, France: Micro-Mega) group (n=15). Curved root canal instrumentation outcomes were evaluated using cone-beam computed tomography (CBCT). Kruskal-Wallis with Bonferroni post hoc test was used to assess differences between working length, the angle and radius of curvature after instrumentation. Results There was a significant difference in angle and radius of curvature (-1.83° One Curve, -2.25° Reciproc blue and -0.18 mm One Curve, -0.19 mm Reciproc blue, respectively) (p<0.05) after instrumentation for both One Curve and Reciproc blue groups, and there was no significant difference in working length change (-0.16 mm One Curve, -0.32 mm Reciproc blue) after instrumentation of both One Curve and Reciproc blue groups (p>0.05). Conclusion The Reciproc blue single file system with reciprocation movement and One Curve with continuous movement cause a significant difference in curvature and radius of curved root canal affecting the original shape of the root canal with no significant difference in working length of the curved root canal.

Apically Extruded Debris in Curved Root Canals Using a New Reciprocating Single-File Shaping System.

INTRODUCTION: The present study addresses the influence of 5 different shaping file systems on apical debris extrusion (AED) using 2 different irrigation protocols. METHODS: One hundred fifty mandibular first permanent molars were divided into 2 groups and 10 subgroups. The mesial root canals were shaped using One Reci (MicroMega), WaveOne Gold Primary (Dentsply Sirona, York, PA), and ProTaper Next (Dentsply Sirona) using reciprocating motion and One Curve (MicroMega) and ProTaper Next using continuous rotation. The first group and the second one were respectively irrigated with 10 and 5 mL distilled water. RESULTS: When the same instrumentation technique was used, the G10 mL subgroups showed statistically lower AED than the G5 mL subgroups (P < .05). The One Reci and One Curve subgroups, in both groups, produced statistically lower AED than the remaining subgroups. CONCLUSIONS: The cross section of the instrument could be the main parameter in determining the amount of AED. The irrigation volume used during the shaping procedure might affect the amount of AED.

Characterization of the differential efficacy of austenitic vs martensitic NiTi rotary files in non-surgical root canal retreatment: a micro-CT analysis.

Aim: Our study aims to characterize the differential efficacy of martensitic and austenitic files in root canal retreatment regarding defiling ability, debris management and morphometric features. Materials and methods: A total of 10 human premolar teeth with two separate fully formed roots were selected, prepared with BioRace system (BR) up to a size BR2 (0.04/25). Root canals were filled and then divided according to the file type into two groups (n = 10). Two geometrically identical files have been used with the only difference between them is heat treatment; One Curve (OC) martensitic and One Shape (OS) austenitic. Preoperative and postoperative Micro-CT scans were done for all the samples, and the percent volume of residual filling materials was calculated. Canals reshaping and remaining debris in the canals were assessed by calculating the volume of the canals before and after retreatment using Micro-CT software. Results: The percentages of removed filling materials were similar between both groups (97.2% OC vs 97.8% OS). OS was significantly faster than OC (P < 0.05). Retreatment procedure did not significantly change volume, structure model index, surface area, and canal curvature. OS group transported the canals more than OC at the apical third (P < 0.05). There were no significant differences between both groups concerning un-instrumented surface area and accumulated hard tissue debris (AHTD) (P > 0.05). Conclusion: Under the circumstances of this study, neither file systems could completely remove the filling materials. However, OC resulted in less transportation than OS in the apical one third (P < 0.05). Also, OC resulted less AHTD than OS but with no statistical difference.

Comparative evaluation of dentin volume removal and centralization of the root canal after shaping with the ProTaper Universal, ProTaper Gold, and One-Curve instruments using micro-CT.

Background. The main goal of our study was to assess the volume of dentin removed and transportation in root canals using ProTaper Universal (PTU), ProTaper Gold (PTG) and One-Curve (OC). Ni-Ti rotary instruments in extracted human teeth using by micro-CT. Methods: Thirty human upper 1st premolar teeth with two separate root canals and sturdy, mature root tips were used in the present study. Specimens were decoronated and root length was standardized for micro CT scanning before root canal preparation done. The teeth were randomly separated into three categories (n = 10) according to the rotary NiTi system used for canal instrumentation, i.e., PTU (Dentsply, Maillefer), PTG (Dentsply, Maillefer), and OC (Micro-Mega SA). After root canal preparation, samples were scanned again on micro-CT by the same scanning parameters. Surface area, canal volume, structure model index (SMI), percentage of uninstrumented area and transportation parameters were obtained for each sample before and after micro-CT analyse. Results: No significant differences between the PTG and PTU in terms of the total volume of removed dentin, surface area and percentage of uninstrumented areas were found. However, regarding to parameters above, OC showed a lower efficacy than PTG and PTU in coronal section. Regarding canal transportation, PTG and OC showed lower mean transportation values at all levels. Conclusion: This paper demonstrated the root canal shaping abilities of the PTU, PTG, and OC NiTi file systems. The PTG and OC systems were associated less canal transportation and a better ability to preserve dentinal walls than PTU. There was no significance different between all rotary file systems for SMI values however, PTU and PTG showed greater canal volume and surface area change than OC file systems in coronal section.

Evaluation of the Cyclic Fatigue of Two Single Files at Body and Room Temperature with Different Radii of Curvature.

Background: To compare the influence of different temperatures and curvature radii on the cyclic fatigue resistance of F6 SkyTaper (F6ST) and One Curve (OC) single file nickel-titanium rotary instruments. Methods: A total of 120 instruments of F6ST and OC #25.06 were evaluated in 5 mm and 3 mm curvature radii at two temperatures (20 °C ± 1 °C and 37 °C ± 1 °C) in 16 mm stainless steel artificial canals associated with a curvature of 60°. The cyclic fatigue of tested files was assessed by employing a customized testing apparatus and expressed as times to fracture (TtF). A statistical analysis was performed with the significance level set at 95%. Results: All instruments decreased their TtF at 37 °C except for OC in the 3 mm radius, in which no significant difference was detected between 20 °C and 37 °C. A 3 mm curvature radius negatively affected TtF of all tested instruments, except for F6ST at 20 °C. F6ST had higher TtF than OC in the 3 mm radius at 20 °C, with no significant difference between them in the other tested conditions. Conclusions: Under the limits of the present in vitro study, body temperature impaired cyclic fatigue resistance of all files, except for OC in the 3 mm curvature radius. All instruments exhibited lower times to fracture in the 3 mm radius, excluding F6ST at 20 °C.

The effect of heat-treated single-file systems on dentinal crack formation.

OBJECTIVES: The aim of this study was to compare the formation of dentinal crack after root canal preparation performed with different heat treated single-file systems. MATERIALS AND METHODS: Forty mandibular premolar teeth were randomly divided into four groups according to the file system to be used during the preparation (n = 10): Group 1: Reciproc Blue; group 2: One Curve; group 3: HyFlex EDM; group 4: (control group) hand files. During the cleaning and shaping, irrigation was performed with a total of 10 ml of 5.25% sodium hypochlorite and 2 mL of distilled water. Then sections were taken from the roots (3, 6 and 9 mm). Sections were examined on a stereomicroscope to determine the presence of cracks. Chi-square test was used for data analysis. RESULTS: There was a significant difference between the groups in dentinal crack frequency (P <.05). HyFlex EDM (13.3%) caused less dentinal crack than One Curve (26.7%) and Reciproc Blue (30%). No cracks were observed in the control group. When 3, 6, and 9 mm were evaluated within themselves, dentinal crack formation did not differ according to the groups (P > 0.05). A statistically higher mean value was obtained in the control group compared to the other groups in terms of working time (P < 0.001). CONCLUSIONS: All the files used during root canal preparation formed dentin crack. Hy-Flex EDM caused less dentinal cracks than other file systems. The flexibility of nickel-titanium instruments because of heat treatment seems to have a significant influence on dentinal crack formation.

Shaping ability of three thermally treated nickel-titanium systems in S-shaped canals.

This study aimed to compare the shaping ability of ProTaper Next (PTN), HyFlex EDM (HEDM) and One Curve (OC) systems manufactured via different thermal treatment methods in simulated S-shaped canals. Sixty S-shaped canals in clear resin blocks were enlarged to a final apical size of 25 using PTN, HEDM and OC instruments (n = 20 canals/group). Composite images were obtained by superimposing pre- and post-preparation images. The amount of removed resin was measured perpendicularly to the canal surface in 22 points. Prepared canal width and canal transportation at different levels were determined. Canal aberrations were also recorded. Data were statistically analysed using analysis of variance, the Kruskal-Wallis and the chi-square tests at a 0.05 significance level. OC produced the most conservative enlargement and better maintained particularly the apical curvature of the S-shaped canals than HEDM and PTN. OC and HEDM better maintained the canal terminus and coronal curvature than PTN.

Shaping ability of ProTaper Gold, One Curve, and Self-Adjusting File systems in severely curved canals: A cone-beam computed tomography study.

AIM: The aim of the study was to evaluate and compare canal transportation (CT), centering ability (CA), and volumetric changes in severely curved canals prepared using ProTaper Gold (PTG), One Curve (OC), and Self-Adjusting File (SAF) systems via cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Sixty mesiobuccal canals of maxillary molars were selected. Pre- and postinstrumentation CBCT scans were taken in the same position. CT and CA were calculated at 1 mm, 4 mm, and 7 mm from the apex; change in volume for whole canal was measured and analyzed statistically. RESULTS: SAF showed the least mean CT at all the levels with no statistically significant differences at 1 mm and 4 mm when compared to other groups while statistically significant differences were observed at 7 mm with PTG and OC. Regarding CA, SAF better maintained canal centricity than PTG and OC at all the levels assessed, though the differences were not statistically significant except at 7 mm where statistically significant difference was observed between SAF and OC. SAF removed less volume of dentin followed by PTG and the highest removal was shown by OC. CONCLUSION: SAF showed promising behavior with the least CT, most centered preparation, and minimal dentin removal.

Influence of surrounding temperature and angle of file access on cyclic fatigue resistance of two single file nickel-titanium instruments.

The purpose of this study was to evaluate the influence of surrounding temperature and angle of file access on cyclic fatigue resistance of F6 SkyTaper (F6ST) and One Curve (OC). 120 new files #25.06 were tested at two insertion angles (0° and 20°) at room (20°C ± 1°C) and body (35°C ± 1°C) temperatures in a 16-mm stainless steel artificial canal (60° curvature and 5-mm radius), using a customised device. Cyclic fatigue resistance was expressed as time to fracture (TtF) in seconds. Data were analysed statistically (P < 0.05). All instruments exhibited lower TtF at 35°C (P < 0.05). An access of 20° did not significantly influence the TtF of tested instruments, independently from the temperature. OC exhibited higher TtF of F6ST at 20°C with a 20° inclination (P < 0.05). Under the present conditions, F6ST and OC showed a significant reduction of cyclic fatigue resistance at body temperature. A file inclined insertion did not affect the cyclic fatigue resistance of tested instruments at both temperatures.

Effects of the endodontic access cavity on apical debris extrusion during root canal preparation using different single-file systems.

OBJECTIVES: This study was conducted to evaluate the effects of traditional and contracted endodontic cavity (TEC and CEC) preparation with the use of Reciproc Blue (RPC B) and One Curve (OC) single-file systems on the amount of apical debris extrusion in mandibular first molar root canals. MATERIALS AND METHODS: Eighty extracted mandibular first molar teeth were randomly assigned to 4 groups (n = 20) according to the endodontic access cavity shape and the single file system used for root canal preparation (reciprocating motion with the RCP B and rotary motion with the OC): TEC-RPC B, TEC-OC, CEC-RPC B, and CEC-OC. The apically extruded debris during preparation was collected in Eppendorf tubes. The amount of extruded debris was quantified by subtracting the weight of the empty tubes from the weight of the Eppendorf tubes containing the debris. Data were analyzed using 1-way analysis of variance with the Tukey post hoc test. The level of significance was set at p < 0.05. RESULTS: The CEC-RPC B group showed more apical debris extrusion than the TEC-OC and CEC-OC groups (p < 0.05). There were no statistically significant differences in the amount of apical debris extrusion among the TEC-OC, CEC-OC, and TEC-RPC B groups. CONCLUSIONS: RPC B caused more apical debris extrusion in the CEC groups than did the OC single-file system. Therefore, it is suggested that the RPC B file should be used carefully in teeth with a CEC.

Microcomputed tomographic evaluation of shaping ability of two thermo mechanically treated single-file systems in severely curved roots.

CONTEXT: Canal shaping abilities such as canal transportation, centering ability, and preparation time are important and have to be considered before using any Nickel-Titanium file system. AIM: This in vitro study aimed to evaluate and compare the amount of canal transportation, centering ability, and time required for the shaping of severely curved canals with WaveOne Gold (WOG) Primary Reciprocating file and One Curve (OC) Rotary file using the micro computed tomography (µCT). MATERIALS AND METHODS: Thirty intact mesial roots of extracted human mandibular first molars having severe curvature (25°-35°) were selected. Samples were divided into two groups. Samples in Group I and II were shaped with WOG primary reciprocating files and OC rotary files, respectively, to the working length. Time required to prepare each canal was recorded. µCT pre- and post-instrumentation scans of all samples were taken. The cross-sectional images at 3, 6, and 9 mm from the radiographic apex were selected for analysis. Statistical analysis was performed using the Kruskal-Wallis and unpaired t-test. RESULTS: At 3 mm, OC showed statistically lower canal transportation with mean value (0.17 ± 0.10) than WOG (0.55 ± 0.42). Furthermore, OC showed statistically significant better centering ability (0.59 ± 0.25) than WOG (0.39 ± 0.20) at 3 mm level. However, the differences between both instruments were not statistical significant at 6 and 9 mm level for canal transportation and centering ratio. WOG reciprocating file required less time for canal preparation than OC file. CONCLUSIONS: OC rotary file showed less canal transportation and better canal centring ability than WOG file, during the preparation of severely curved canals. However, WOG required less time for canal preparation.