Poly(3,4-Ethylenedioxythiophene):Sulfamic Acid Modified Aramid Nanofibers: An Innovative Conductive Polymer With Enhanced Electromagnetic Interference Shielding and Thermoelectric Performance.

The development of alternative conductive polymers for the well-known poly (3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is of great significance for improving the stability in long-term using and high-temperature environments. Herein, an innovative PEDOT:S-ANF aqueous dispersion is successfully prepared by using sulfamic acid (SA) to modified aramid nanofibers (S-ANF) as an alternative dispersant for PSS and the subsequent in situ polymerization of PEDOT. Thanks to the excellent film forming ability and surface negative groups of S-ANF, the PEDOT:S-ANF films show comparable tensile strength and elongation to unmodified PEDOT:ANF. Meanwhile, PEDOT:S-ANF has a high conductivity of 27.87 S cm-1, which is more than 20 times higher than that of PEDOT:PSS. The film exhibits excellent electromagnetic interference (EMI) shielding and thermoelectric performance, with a shielding effectiveness (SE) of 31.14 dB and a power factor (PF) of 0.43 µW m-1K-2. As a substitute for PSS, S-ANF exhibits significant structural and physicochemical properties, resulting in excellent chemical and thermal stability. Even under harsh conditions such as immersing to 0.1 M HCl, 0.1 M NaOH, and 3.5% NaCl solution, or high temperature conditions, the PEDOT:S-ANF films still maintain exceptional EMI shielding performance. Therefore, this multifunctional conductive polymer exhibits enormous potential and even proves its reliability in extreme situations.

High-Stability Near-Infrared Luminescent Glass Ceramic and Its Applications.

Near-infrared (NIR) light, valuable for its biological penetration and invisibility to the human eye, is a crucial tool in biomedicine, environmental monitoring, anticounterfeiting, and information encryption, yet traditional NIR luminescent materials are often unstable in humid conditions. Here, a highly stable MgGeO3:Mn2+ glass ceramic (GC) with NIR luminescence was successfully synthesized. As-obtained GC700 boasts exceptional luminescent capabilities and possesses abundant trap structures, enabling data inscription with a 405 nm laser and retrieval via laser/thermal excitation. Moreover, the emission peak of Mn2+ can be manipulated from 630 to 691 nm by increasing the annealing treatment temperature. With the harnessing of the effective NIR emission, stable carrier characteristics, and numerous trap structures, there is potential for application in information encryption. Accordingly, we explored the application of MgGeO3:Mn2+ GC (GC700 and GC800) samples in precious three-dimensional (3D) information storage and NIR mechanoluminescence (ML) for biological tissue imaging. These applications demonstrate the potential and versatility of electron-capturing NIR luminescent materials in a range of cutting-edge fields.

A Miniaturized and Highly Stable Frequency-Selective Rasorber Incorporating an Embedded Transmission Window.

In this article, a miniaturized and highly stable frequency-selective rasorber (FSR) incorporating an embedded transmission window is designed. This FSR consists of a lossy layer loaded with resistors, an air layer, and a bandpass layer. The lossy layer is provided with a rectangular, square ring structure loaded with four 180 Ω resistors and four quadrilateral metal plates. The four metal plates are connected to the four corners of the inner ring around the square ring and are radially distributed along the diagonal. The bandpass layer is a square metal patch that a cross-ring slot structure is loaded inside of, and the cross points lie in the direction along the diagonal of the unit. The inner boundary of the cross-ring is composed of two mutually perpendicular and long rectangular elements. This FSR shows an embedded transmission window from 3.63 GHz to 3.80 GHz and has a transmission rate of 93% at 3.72 GHz. Moreover, both sides of the transmission band, namely, 1.86-3.35 GHz and 3.99-8.28 GHz, have an absorption rate of more than 80% and bilateral relative bandwidth of more than 50%. In addition, this structure exhibits excellent miniaturization performance, polarization insensitivity, and angular stability. Finally, a prototype of the designed FSR is processed and measured. The measured results are basically consistent with the simulation results.

Ultraviolet Nonlinear Optical Single Crystals of A Three-Dimensional Chiral Covalent Framework Containing Te-O-B-O Bonds.

Extending covalent organic frameworks (COFs) into crystalline carbon-free covalent backbones is an important strategy to endow these materials with more exotic functions. Integrating metal-free inorganic and organic components into one covalent framework is an effective way to address the issue of poor thermal/solvent stability in the field of nonlinear optics (NLO). However, constructing such structures is very challenging. Here, we linked 3-connected nods (BO3) and 2-connected organic building blocks (Te(Ph)2) together to produce colorless single crystals (size up to 400 µm) of a three-dimensional (3D) chiral covalent framework (CityU-22). The single-crystal X-ray diffraction (SCXRD) analysis reveals that CityU-22 has a non-carbon Te-O-B-O bond-based network with the srs topology. The chiral CityU-22 displays good stability under the treatment of different common solvents or heat (the decomposition temperature above 300 °C). Due to its non-π-conjugated backbone (-Te-O-B-O-), CityU-22 shows an ultraviolet NLO behavior with a second-harmonic generation (SHG) response similar to KH2PO4 (KDP).

Stable production of hydrogen peroxide over zinc oxide @ zeolitic imidazolate Framework-8 composite catalysts.

A promising method of producing hydrogen peroxide (H2O2) is the electrochemical two-electron water oxidation reaction (2e- WOR). In this process, it is important to design electrocatalysts that are both earth abundant and environmentally friendly, as well as offering high stability and production rates. The research of WOR catalysts, such as the extensively used transition metal oxides, is mainly focused on the modification of transition metal elements. Few studies pay attention to the protective heterostructure of metal oxides. Here, we demonstrate for the first time an organometallic skeleton protection strategy to develop highly stable WOR catalysts for H2O2 generation. Unlike the pure ZnO and zeolite imidazole framework-8 (ZIF-8) catalysts, ZnO@ZIF-8 enabled the production of hydrogen peroxide at high voltages. The experimental results demonstrate that the ZnO@ZIF-8 catalyst stably generates H2O2 even under a high voltage of 3.0 V vs. RHE, with a yield reaching 2845.819 µmolmin-1 g-1. ZnO@ZIF-8 shows a relatively low overpotential, with a current density of 10 mA cm-2 and an overpotential of 110 mV. The ZnO@ZIF-8 catalyst's maximal FE value was 4.72 %. Moreover, the ZnO@ZIF-8 catalyst exhibits remarkable durability even after an extended 60-hour stability test. Operando Raman and theoretic calculation analyses reveal that the metal-organic skeleton being encapsulated on the metal oxide surface synergizes with each other, not only expanding the electrochemical surface area, but also adjusting the catalyst metal sites' adsorption capacity. A novel approach to the modification of 2e- WOR metal oxide catalyst is presented in this work.

Oxygen vacancy-mediated Mn2O3 catalyst with high efficiency and stability for toluene oxidation.

Oxygen vacancy engineering in transition metal oxides is an effective strategy for improving catalytic performance. Herein, defect-enriched Mn2O3 catalysts were constructed by controlling the calcination temperature. The high content of oxygen vacancies and accompanying Mn4+ ions were generated in Mn2O3 catalysts calcined at low temperature, which could greatly improve the low-temperature reducibility and migration of surface oxygen species. DFT theoretical calculations further confirmed that molecular oxygen and toluene were easily adsorbed over defective α-Mn2O3 (222) facets with an energy of -0.29 and -0.48 eV, respectively, and corresponding OO bond length is stretched to 1.43 Å, resulting in the highly reactive oxygen species. Mn2O3-300 catalyst with abundant oxygen vacancies exhibited the highest specific reaction rate and lowest activation energy. Furthermore, the optimized catalyst possessed the outstanding stability, water tolerance and CO2 yield. In comparison with the fresh Mn2O3-300 catalyst, the physical structure and surface property of the used catalyst remained almost unchanged regardless of whether undergoing the stability test at consecutive catalytic runs as well as high temperature, and water resistance test. In situ DRIFTS spectra further elucidated that introducing the water vapor had little effect on the reaction intermediates, indicating the excellent durability of the defect-enriched catalyst.

Very Stable and Efficient Tandem Quantum-Dot Light-Emitting Diodes Enabled by IZO-Based Interconnecting Layers.

Theoretically, tandem quantum-dot light-emitting diodes (QLEDs) hold great promise for achieving both high efficiency and high stability in display applications. However, in practice, their operational stability remains considerably inferior to that of state-of-the-art devices. In this study, we developed a new tandem structure with optimal electrical and optical performance to simultaneously improve the efficiency and stability of tandem QLEDs. Electrically, upon development of a barrier-free interconnecting layer enabled by an indium-zinc oxide bridging layer and a conductive ZnMgO layer, the driving voltage of the tandem QLEDs is remarkably reduced. Optically, upon development of a top-emitting structure and optimization of the cavity length guided by a theoretical simulation, a maximum light extraction efficiency is achieved. As a result, the red tandem QLEDs exhibit a maximum external quantum efficiency of 49.01% and a T95 lifetime at 1000 cd/m2 of >50 000 h, making them one of the most efficient and stable QLEDs ever reported.

High Stability and Corrosion-Resistant Gas of Recyclable and Versatile Manganese-Doped Lead-Free Double Perovskite Crystals toward Novel Functional Fabric and Photoelectric Device.

Lead-free halide perovskites possess excellent photoelectric properties, making them widely used in the photoelectric fields. Herein, lead-free double perovskite crystals (PCs) doped with manganese (Cs2NaInCl6:Mn2+) are successfully prepared by the more energy-efficient crystallization method. The crystals emit bright orange-red light under the ultraviolet (UV) lamp, showing unique optical properties. They have the highest photoluminescence quantum yield of 42.91%. The white light-emitting diodes (LEDs) are fabricated using these perovskite crystals, which show a color rendering index of 92 and external quantum efficiency (EQE) as high as 16.3%. Furtherly, perovskite-modified fiber paper made of aramid chopped fibers (ACFs) and polyphenylene sulfide (PPS) exhibited fluorescent properties under different conditions. This paper combines fiber composite technology with PPS fiber filter bags, which are widely used in environmental protection, for the first time and demonstrates functional fiber filter bags with fluorescent characteristics. This filter bag provides an idea for the automatic detection of industrial filtration. Meanwhile, after being exposed to industrial waste gas for 60 h, the filter bag can maintain superior fluorescence performance. In this study, lead-free double perovskites are synthesized using an efficient method for preparing high-performance LEDs and high-stability fluorescent fibers. Concurrently, the application of perovskites in environmental protection is expanded.

Core-Shell Si@SiOC Particles Synthesized Using Supercritical Carbon Dioxide Fluid for Superior Li-Ion Storage Performance.

A supercritical carbon dioxide (SCCO2) fluid, characterized by gas-like diffusivity, near-zero surface tension, and excellent mass transfer properties, is used as a precursor to produce silicon oxycarbide (SiOC) coating. SCCO2 disperses and reacts with Si particles to form an interfacial layer consisting of Si, O, and C. After an 850 °C annealing process, a conformal SiOC coating layer forms, resulting in core-shell Si@SiOC particles. High-resolution transmission electron microscopy and its X-ray line-scan spectroscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy, are used to examine the SiOC formation mechanism. Effects of SCCO2 interaction time on the SiOC properties are investigated. The SiOC layer connects the Si@SiOC particles, improving electron and Li+ transport. Cyclic voltammetry, galvanostatic intermittent titration technique, and electrochemical impedance spectroscopy are employed to examine the role of SiOC during charging/discharging. Operando X-ray diffraction data reveal that the SiOC coating reduces crystal size of the formed Li15Si4 and increases its formation/elimination reversibility during cycling. The Si@SiOC electrode shows a capacitiy of 2250 mAh g-1 at 0.2 A g-1. After 500 cycles, the capacity retention is 72% with Coulombic efficiency above 99.8%. A full cell consisting of Si@SiOC anode and LiNi0.8Co0.1Mn0.1O2 cathode is constructed, and its performance is evaluated.

Au-Pt Coating Improved Catalytic Stability of Au@AuPt Nanoparticles for Pressure-Based Point-of-Care Detection of Escherichia coli O157:H7.

Point-of-care testing (POCT) technologies facilitate onsite detection of pathogens in minutes to hours. Among various POCT approaches, pressure-based sensors that utilize gas-generating reactions, particularly those catalyzed by nanozymes (e.g., platinum nanoparticles, PtNPs, or platinum-coated gold nanoparticles, and Au@PtNPs) have been shown to provide rapid and sensitive detection capabilities. The current study introduces Au-Pt alloy-coated gold nanoparticles (Au@AuPtNPs), an innovative nanozyme with enhanced catalytic activity and relatively high stability. For pathogen detection, Au@AuPtNPs are modified with H1 or H2 hairpin DNAs that can be triggered to undergo a hybridization chain reaction (HCR) that leads to their aggregation upon recognition by an initiator strand (Ini) with H1-/H2-complementary aptamers tethered to magnetic beads (MBs). Pathogen binding to the aptamer exposes Ini, which then binds Au@AuPtNPs and initiates a HCR, resulting in Au@AuPtNP aggregation on MBs. These Au@AuPtNP aggregates exhibit strong catalysis of O2 from the H2O2 substrate, which is measured by a pressure meter, enabling detection of Escherichia coli (E. coli) O157:H7 at concentrations as low as 3 CFU/mL with high specificity. Additionally, E. coli O157:H7 could also be detected in simulated water and tea samples. This method eliminates the need for costly, labor- and training-intensive instruments, supporting its further testing and validation for deployment as a rapid-response POCT application in the detection of bacterial contaminants.

Surface-Modified Ruthenium Nanorods for an Ampere-Level Bifunctional Hydrogen Evolution Reaction/Oxygen Evolution Reaction Electrocatalyst.

The practical applications of bifunctional ruthenium-based electrocatalysts with two active sites of Ru nanoparticles covered with RuO2 skins are limited. One reason is the presence of multiple equally distributed facets, some of which are inactive. In contrast, ruthenium nanorods with a high aspect ratio have multiple unequally distributed facets containing the dominance of active faces for efficient electrocatalysis. However, the synthesis of ruthenium nanorods has not been achieved due to difficulties in controlling the growth. Additionally, it is known that the adsorption capacity of intermediates can be impacted by the surface of the catalyst. Inspired by these backgrounds, the surface-modified (SM) ruthenium nanorods having a dominant active facet of hcp (100) through chemisorbed oxygen and OH groups (SMRu-NRs@NF) are rationally synthesized through the surfactant coordination method. SMRu-NRs@NF exhibits excellent hydrogen evolution in acid and alkaline solutions with an ultralow overpotential of 215 and 185 mV reaching 1000 mA cm-2, respectively. Moreover, it has also shown brilliant oxygen evolution electrocatalysis in alkaline solution with a low potential of 1.58 V to reach 1000 mA cm-2. It also exhibits high durability over 143 h for the evolution of oxygen and hydrogen at 1000 mA cm-2. Density functional theory studies confirmed that surface modification of a ruthenium nanorod with chemisorbed oxygen and OH groups can optimize the reaction energy barriers of hydrogen and oxygen intermediates. The surface-modified ruthenium nanorod strategy paves a path to develop the practical water splitting electrocatalyst.

Effect of Mn2+ Doping on the Photoluminescence of Hybrid One-Dimensional Lead Halide Post-Perovskites.

Although organic-inorganic hybrid one-dimensional (1D) lead halide postperovskites (LHPPs) have been reported to show white luminescence and tunable photoluminescence quantum yield (PLQY), their structure-property relationships are not fully understood. Here, we used Mn2+ to test the doping effect on the luminescence of two 1D-LHPPs compounds, namely, {TETA[Pb2Br6]}n 1 and {TETA[Pb2Cl6]}n 2, where TETA = triethylenetetrammonium. We found the pristine compounds show yellowish (551 nm) and bluish (447 nm) emission for 1 and 2, respectively, nanosecond excitation lifetimes (4.17 ns for 1 and 2.29 ns for 2) and low PLQYs (4.65 and 3.57% for 1 and 2, respectively). By fine-doping the Mn2+ ions to ca. 8% the PLQYs for 1 and 2 are maximized to 24 and 25% for 1 and 2, respectively. Upon the increasing Mn2+ dopant, the emission wavelengths can also vary gradually from 551 to 615 nm and from 447 to 660 nm for 1 and 2, respectively, covering almost the whole visible-light range, and the excitation lifetimes are enhanced to microseconds (0.77 µs for 1 and 0.39 µs for 2), owing to the more spin-forbidden d-d transition (4T1-6A1) component from the Mn2+ ions present in the photoluminescence spectra. Moreover, these Mn2+-doped 1D-LHPPs demonstrate high structural and optical stability in humid and high-temperature environments. Hence, such doped materials can be fabricated into a UV-pumped white light-emitting diode, rendering the potential application for solid-state lighting and display systems.

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2-b]thiophene Additive.

Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2-b]thiophene (TT) and 3,6-dibromothieno[3,2-b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT-treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8-BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Additive-Free Anode with High Stability: Nb2CTx MXene Prepared by HCl-LiF Hydrothermal Etching for Lithium-Ion Batteries.

MXenes, represented by Ti3C2Tx, have been widely studied in the electrochemical energy storage fields, including lithium-ion batteries, for their unique two-dimensional structure, tunable surface chemistry, and excellent electrical conductivity. Recently, Nb2CTx, as a new type of MXene, has attracted more and more attention due to its high theoretical specific capacity of 542 mAh g-1. However, the preparation of few-layer Nb2CTx nanosheets with high-quality remains a challenge, which limits their research and application. In this work, high-quality few-layer Nb2CTx nanosheets with a large lateral size and a high conductivity of up to 500 S cm-1 were prepared by a simple HCl-LiF hydrothermal etching method, which is 2 orders of magnitude higher than that of previously reported Nb2CTx. Furthermore, from its aqueous ink, the viscosity-tunable organic few-layer Nb2CTx ink was prepared by HCl-induced flocculation and N-methyl-2-pyrrolidone treatment. When using the organic few-layer Nb2CTx ink as an additive-free anode of lithium-ion batteries, it showed excellent cycling performance with a reversible specific capacity of 524.0 mAh g-1 after 500 cycles at 0.5 A g-1 and 444.0 mAh g-1 after 5000 cycles at 1 A g-1. For rate performance, a specific capacity of 159.8 mAh g-1 was obtained at a high current density of 5 A g-1, and an excellent capacity retention rate of about 95.65% was achieved when the current density returned to 0.5 A g-1. This work presents a simple and scalable process for the preparation of high-quality Nb2CTx and its aqueous/organic ink, which demonstrates important application potential as electrodes for electrochemical energy storage devices.

Ammonia-Responsive Colorimetric Film of Phytochemical Formulation (Alizarin) Grafted onto ZIF-8 Carrier with Poly(vinyl alcohol) and Sodium Alginate for Beef Freshness Monitoring.

In this study, we devised a photothermally stable phytochemical dye by leveraging alizarin in conjunction with the metal-organic framework ZIF-8 (AL@ZIF-8). The approach involved grafting alizarin into the microporous structure of ZIF-8 through physical adsorption and hydrogen-bonding interactions. AL@ZIF-8 significantly enhanced the photostability and thermostability of alizarin. The nanoparticles demonstrate substantial color changes in various pH environments, showcasing their potential for meat freshness monitoring. Furthermore, we introduced an intelligent film utilizing poly(vinyl alcohol)-sodium alginate-AL@ZIF-8 (PA-SA-ZA) for detecting beef freshness. The sensor exhibited a superior water contact angle (52.34°) compared to the alizarin indicator. The color stability of the film was significantly enhanced under visible and UV light (ΔE < 5). During beef storage, the film displayed significant color fluctuations correlating with TVB-N (R2=0.9067), providing precise early warning signals for assessing beef freshness.

Industrial-Si-based photoanode for highly efficient and stable water splitting.

Photoelectrochemical (PEC) water splitting is an effective and sustainable method for solar energy harvesting. However, the technology is still far away from practical application because of the high cost and low efficiency. Here, we report a low-cost, stable and high-performing industrial-Si-based photoanode (n-Indus-Si/Co-2mA-xs) that is fabricated by simple electrodeposition. Systematic characterizations such as scanning electron microscopy, X-ray photoelectron spectroscopy have been employed to characterize and understand the working mechanisms of this photoanode. The uniform and adherent dispersion of co-catalyst particles result in high built-in electric field, reduced charge transfer resistance, and abundant active sites. The core-shell structure of co-catalyst particles is formed after the activation process. The reconstructed morphology and modified chemical states of the surface co-catalyst particles improve the separation and transfer of charges, and the reaction kinetics for water oxidation greatly. Our work demonstrates that large-scale PEC water splitting can be achieved by engineering the industrial-Si-based photoelectrode, which shall guide the development of solar energy conversion in the industry.

AuNi bimetallic aerogel with ultra-high stability applied in smart and portable biosensing.

Glucose detection is of significant importance in providing information to the human health management. However, conventional enzymatic glucose sensors suffer from a limited long-term stability due to the losing activity of the enzymes. In this work, the AuNi bimetallic aerogel with a well-defined nanowire network is synthesized and applied as the sensing nanomaterial in the non-enzymatic glucose detection. The three-dimensional (3D) hierarchical porous structure of the AuNi bimetallic aerogel ensures the high sensitivity of the sensor (40.34 µA mM-1 cm-2). Theoretical investigation unveiled the mechanism of the boosting electrocatalytic activity of the AuNi bimetallic aerogel toward glucose. A better adhesion between the sensing nanomaterial and the screen-printing electrodes (SPEs) is obtained after the introduction of Ni. On the basis of a wide linearity in the range of 0.1-5 mM, an excellent selectivity, an outstanding long-term stability (90 days) as well as the help of the signal processing circuit and an M5stack development board, the as-prepared glucose sensor successfully realizes remote monitoring of the glucose concentration. We speculate that this work is favorable to motivating the technological innovations of the non-enzymatic glucose sensors and intelligent sensing devices.

Mn(II)-Activated Zero-Dimensional Zinc(II)-Based Metal Halide Hybrids with Near-Unity Photoluminescence Quantum Yield.

As derivatives of metal halide perovskite materials, low-dimensional metal halide materials have become important materials that have attracted much attention in recent years. As one branch, zinc-based metal halides have the potential for practical applications due to their lead-free, low-toxicity and high-stability characteristics. However, pure zinc-based metal halide materials are still limited by their poor optical properties and cannot achieve large-scale practical applications. Therefore, in this work, we report an organic-inorganic hybrid zero-dimensional zinc bromide, (TDMP)ZnBr4, using transition metal Mn2+ ions as dopants and incorporating them into the (TDMP)ZnBr4 lattice. The original non-emissive (TDMP)ZnBr4 exhibits bright green emission under the excitation of external UV light after the introduction of Mn2+ ions with a PL peak position located at 538 nm and a PLQY of up to 91.2%. Through the characterization of relevant photophysical properties and the results of theoretical calculations, we confirm that this green emission in Mn2+:(TDMP)ZnBr4 originates from the 4T1 → 6A1 optical transition process of Mn2+ ions in the lattice structure, and the near-unity PLQY benefits from highly localized electrons generated by the unique zero-dimensional structure of the host material (TDMP)ZnBr4. This work provides theoretical guidance and reference for expanding the family of zinc-based metal halide materials and improving and controlling their optical properties through ion doping.

Double Nitrogenation Layer Formed Using Nitric Oxide for Enhancing Li+ Storage Performance, Cycling Stability, and Safety of Si Electrodes.

To enhance Li storage properties, nitrogenation methods are developed for Si anodes. First, melamine, urea, and nitric oxide (NO) precursors are used to nitrogenize carbon-coated Si particles. The properties of the obtained particles are compared. It is found that the NO process can maximize the graphitic nitrogen (N) content and electronic conductivity of a sample. In addition, optimized N functional groups and O─C species on the electrode surface increase electrolyte wettability. However, with a carbon barrier layer, NO hardly nitrogenizes the Si cores. Therefore, bare Si particles are reacted with NO. Core-shell Si@amorphous SiNx particles are produced using a facile and scalable NO treatment route. The effects of the NO reaction time on the physicochemical properties and charge-discharge performance of the obtained materials are systematically examined. Finally, the Si@SiNx particles are coated with N-doped carbon. Superior capacities of 2435 and 1280 mAh g-1 are achieved at 0.2 and 5 A g-1, respectively. After 300 cycles, 90% of the initial capacity is retained. In addition, differential scanning calorimetry data indicate that the multiple nitrogenation layers formed by NO significantly suppress electrode exothermic reactions during thermal runaway.

A new paradigm for smart packaging: A dual-channel freshness monitoring platform based on aerogels of sodium alginate-anthocyanin complex with high colorimetric sensitivity and stability.

Global seafood consumption is estimated at 156 million tons annually, with an economic loss of >25 billion euros annually due to marine fish spoilage. In contrast to traditional smart packaging which can only roughly estimate food freshness, an intelligent platform integrating machine learning and smart aerogel can accurately predict remaining shelf life in food products, reducing economic losses and food waste. In this study, we prepared aerogels based on anthocyanin complexes that exhibited excellent environmental responsiveness, high porosity, high color-rendering properties, high biocompatibility, high stability, and irreversibility. The aerogel showed excellent indication properties for rainbow trout and proved suitable for fish storage environments. Among the four machine learning models, the radial basis function neural network and backpropagation network optimized by genetic algorithm demonstrated excellent monitoring performance. Also, the two-channel dataset provided more comprehensive information and superior descriptive capability. The three-layer structure of the monitoring platform provided a new paradigm for intelligent and sophisticated food packaging. The results of the study might be of great significance to the food industry and sustainable development.