RÉSUMÉ
Xylan is a fundamental structural polysaccharide in plant secondary cell walls and a valuable resource for biorefinery applications. Deciphering the molecular motifs of xylans that mediate their interaction with cellulose and lignin is fundamental to understand the structural integrity of plant cell walls and to design lignocellulosic materials. In the present study, we investigated the pattern of acetylation and glucuronidation substitution in hardwood glucuronoxylan (GX) extracted from aspen wood using subcritical water and alkaline conditions. Enzymatic digestions of GX with ß-xylanases from glycosyl hydrolase (GH) families GH10, GH11 and GH30 generated xylo-oligosaccharides with controlled structures amenable for mass spectrometric glycan sequencing. We identified the occurrence of intramolecular motifs in aspen GX with block repeats of even glucuronidation (every 2 xylose units) and consecutive glucuronidation, which are unique features for hardwood xylans. The acetylation pattern of aspen GX shows major domains with evenly-spaced decorations, together with minor stretches of highly acetylated domains. These heterogenous patterns of GX can be correlated with its extractability and with its potential interaction with lignin and cellulose. Our study provides new insights into the molecular structure of xylan in hardwood species, which has fundamental implications for overcoming lignocellulose recalcitrance during biochemical conversion.
Sujet(s)
Populus , Bois , Xylanes , Xylanes/composition chimique , Xylanes/métabolisme , Bois/composition chimique , Populus/composition chimique , Acétylation , Endo-1,4-beta xylanases/composition chimique , Endo-1,4-beta xylanases/métabolisme , Endo-1,4-beta xylanases/génétique , Lignine/composition chimique , Cellulose/composition chimique , Cellulose/métabolismeRÉSUMÉ
Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that oxidatively cleave recalcitrant polysaccharides such as cellulose. Several studies have reported LPMO action in synergy with other carbohydrate-active enzymes (CAZymes) for the degradation of lignocellulosic biomass but direct LPMO action at the plant tissue level remains challenging to investigate. Here, we have developed a MALDI-MS imaging workflow to detect oxidised oligosaccharides released by a cellulose-active LPMO at cellular level on maize tissues. Using this workflow, we imaged LPMO action and gained insight into the spatial variation and relative abundance of oxidised and non-oxidised oligosaccharides. We reveal a targeted action of the LPMO related to the composition and organisation of plant cell walls.
Sujet(s)
Mixed function oxygenases , Spectrométrie de masse MALDI , Zea mays , Zea mays/composition chimique , Mixed function oxygenases/métabolisme , Mixed function oxygenases/composition chimique , Spectrométrie de masse MALDI/méthodes , Cellulose/composition chimique , Cellulose/métabolisme , Paroi cellulaire/composition chimique , Paroi cellulaire/métabolisme , Oligosaccharides/composition chimique , Oligosaccharides/métabolisme , Lignine/composition chimique , Lignine/métabolisme , Oxydoréduction , Polyosides/composition chimique , Polyosides/métabolisme , Protéines végétales/composition chimique , Protéines végétales/métabolismeRÉSUMÉ
Bacterial cellulose (BC) is a renewable biomaterial that has attracted significant attention due to its excellent properties and wide applications. Komagataeibacter xylinus CGMCC 2955 is an important BC-producing strain. It primarily produces BC from glucose while simultaneously generating gluconic acid as a by-product, which acidifies the medium and inhibits BC synthesis. To enhance glucose uptake and BC synthesis, we reconstructed the phosphoenolpyruvate-dependent glucose phosphotransferase system (PTSGlc) and strengthened glycolysis by introducing heterologous genes, resulting in a recombinant strain (GX08PTS03; Δgcd::ptsHIcrrE. coli::ptsGE. coli::pfkAE. coli). Strain GX08PTS03 efficiently utilized glucose for BC production without accumulating gluconic acid. Subsequently, the fermentation process was systematically optimized. Under optimal conditions, strain GX08PTS03 produced 7.74 g/L of BC after 6 days of static fermentation, with a BC yield of 0.39 g/g glucose, which were 87.41 % and 77.27 % higher than those of the wild-type strain, respectively. The BC produced by strain GX08PTS03 exhibited a longer fiber diameter along with a lower porosity, significantly higher solid content, crystallinity, tensile strength, and Young's modulus. This study is novel in reporting that the engineered PTSGlc-based glucose metabolism could effectively enhance the production and properties of BC, providing a future outlook for the biopolymer industry.
Sujet(s)
Acetobacteraceae , Cellulose , Glucose , Cellulose/biosynthèse , Cellulose/métabolisme , Cellulose/composition chimique , Glucose/métabolisme , Acetobacteraceae/métabolisme , Acetobacteraceae/génétique , Phosphoenolpyruvate-fructose phosphotransferase/génétique , Phosphoenolpyruvate-fructose phosphotransferase/métabolisme , Fermentation , Génie métabolique/méthodes , Gluconacetobacter xylinus/métabolisme , Gluconacetobacter xylinus/génétique , Résistance à la tractionRÉSUMÉ
The low solubility of pea protein isolate (PPI) greatly limits its functional properties and its wide application in food field. Thus, this study investigated the effects and mechanisms of cellulose nanocrystals (CNC) (0.1-0.4 %) and CaCl2 (0.4-1.6 mM) on the solubility of PPI. The results showed that the synergistic effect of CNC (0.3 %) and Ca2+ (1.2 mM) increased the solubility of PPI by 242.31 %. CNC and Ca2+ changed the molecular conformation of PPI, enhanced intermolecular forces, and thus induced changes in the molecular morphology of PPI. Meanwhile, the turbidity of PPI decreased, while surface hydrophobicity, the absolute zeta potential value, viscoelasticity, ß-sheet ratio, and thermal properties increased. CNC bound to PPI molecules through van der Waals force and hydrogen bond. Ca2+ could strengthen the crosslinking between CNC and PPI. In summary, it is proposed a valuable combination method to improve the solubility of PPI, and it is believed that this research is of great significance for expanding the application fields of PPI and modifying plant proteins.
Sujet(s)
Calcium , Cellulose , Nanoparticules , Protéines de pois , Solubilité , Nanoparticules/composition chimique , Cellulose/composition chimique , Protéines de pois/composition chimique , Calcium/composition chimique , Pisum sativum/composition chimique , Interactions hydrophobes et hydrophiles , Chlorure de calcium/composition chimique , Liaison hydrogèneRÉSUMÉ
Bacterial cellulose (BC) is gathering increased attention due to its remarkable physico-chemical features. The high biocompatibility, hydrophilicity, and mechanical and thermal stability endorse BC as a suitable candidate for biomedical applications. Nonetheless, exploiting BC for tissue regeneration demands three-dimensional, intricately shaped implants, a highly ambitious endeavor. This challenge is addressed here by growing BC within a sacrificial viscoelastic medium consisting of an agarose gel cast inside polydimethylsiloxane (PDMS) molds imprinted with the features of the desired implant. BC produced with and without agarose has been compared through SEM, TGA, FTIR, and XRD, probing the mild impact of the agarose on the BC properties. As a first proof of concept, a PDMS mold shaped as a doll's ear was used to produce a BC perfect replica, even for the smallest features. The second trial comprised a doll face imprinted on a PDMS mold. In that case, the BC production included consecutive deactivation and activation of the aerial oxygen stream. The resulting BC face clone fitted perfectly and conformally with the template doll face, while its rheological properties were comparable to those of collagen. This streamlining concept conveys to the biosynthesized nanocelluloses broader opportunities for more advanced prosthetics and soft tissue engineering uses.
Sujet(s)
Cellulose , Polydiméthylsiloxanes , Oxygène , Agarose , Cellulose/composition chimique , Agarose/composition chimique , Oxygène/composition chimique , Polydiméthylsiloxanes/composition chimique , Rhéologie , Ingénierie tissulaire/méthodes , Matériaux biocompatibles/composition chimique , Structures d'échafaudage tissulaires/composition chimiqueRÉSUMÉ
The intricate microenvironment of diabetic wounds characterized by hyperglycemia, intense oxidative stress, persistent bacterial infection and complex pH fluctuations hinders the healing process. Herein, an injectable multifunctional hydrogel (QPTx) was developed, which exhibited excellent mechanical performance and triple responsiveness to pH, temperature, and glucose due to dynamic covalent cross-linking involving dynamic Schiff base bonds and phenylboronate esters with phenylboronic-modified quaternized chitosan (QCS-PBA), polydopamine coated tunicate cellulose crystals (PDAn@TCNCs) and polyvinyl alcohol (PVA). Furthermore, the hydrogels can incorporate insulin (INS) drugs to adapt to the complex and variable wound environment in diabetic patients for on-demand drug release that promote diabetic wound healing. Based on various excellent properties of the colloidal materials, the hydrogels were evaluated for self-healing, rheological and mechanical properties, in vitro insulin response to pH/temperature/glucose release, antibacterial, antioxidant, tissue adhesion, coagulation, hemostasis in vivo and in vitro, and biocompatibility and biodegradability. By introducing PDAn@TCNCs particles, the hydrogel has photothermal antibacterial activity, enhanced adhesion and oxidation resistance. We further demonstrated that these hydrogel dressings significantly improved the healing process compared to commercial dressings (Tegaderm™) in full-layer skin defect models. All indicated that the glucose-responsive QPTx hydrogel platform has great potential for treating diabetic wounds.
Sujet(s)
Antibactériens , Bandages , Cellulose , Hydrogels , Nanoparticules , Cicatrisation de plaie , Cicatrisation de plaie/effets des médicaments et des substances chimiques , Cellulose/composition chimique , Cellulose/pharmacologie , Cellulose/analogues et dérivés , Hydrogels/composition chimique , Hydrogels/pharmacologie , Animaux , Antibactériens/pharmacologie , Antibactériens/composition chimique , Nanoparticules/composition chimique , Staphylococcus aureus/effets des médicaments et des substances chimiques , Escherichia coli/effets des médicaments et des substances chimiques , Insuline/administration et posologie , Urochordata/composition chimique , Chitosane/composition chimique , Polymères/composition chimique , Polymères/pharmacologie , Mâle , Indoles/composition chimique , Indoles/pharmacologie , Poly(alcool vinylique)/composition chimique , Libération de médicament , Humains , Concentration en ions d'hydrogène , Diabète expérimental/traitement médicamenteux , Souris , Rats , Rat Sprague-DawleyRÉSUMÉ
The complexity of plant cell walls on different hierarchical levels still impedes the detailed understanding of biosynthetic pathways, interferes with processing in industry and finally limits applicability of cellulose materials. While there exist many challenges to readily accessing these hierarchies at (sub-) angström resolution, the development of advanced computational methods has the potential to unravel important questions in this field. Here, we summarize the contributions of molecular dynamics simulations in advancing the understanding of the physico-chemical properties of natural fibres. We aim to present a comprehensive view of the advancements and insights gained from molecular dynamics simulations in the field of carbohydrate polymers research. The review holds immense value as a vital reference for researchers seeking to undertake atomistic simulations of plant cell wall constituents. Its significance extends beyond the realm of molecular modeling and chemistry, as it offers a pathway to develop a more profound comprehension of plant cell wall chemistry, interactions, and behavior. By delving into these fundamental aspects, the review provides invaluable insights into future perspectives for exploration. Researchers within the molecular modeling and carbohydrates community can greatly benefit from this resource, enabling them to make significant strides in unraveling the intricacies of plant cell wall dynamics.
Sujet(s)
Paroi cellulaire , Cellulose , Simulation de dynamique moléculaire , Polyosides , Paroi cellulaire/composition chimique , Paroi cellulaire/métabolisme , Cellulose/composition chimique , Polyosides/composition chimique , Plantes/composition chimique , Plantes/métabolisme , Cellules végétales/composition chimique , Cellules végétales/métabolismeRÉSUMÉ
Nanocellulose, a versatile and sustainable nanomaterial derived from cellulose fibers, has attracted considerable attention in various fields due to its unique properties. Similar to dietary fibers, nanocellulose is difficult to digest in the human gastrointestinal tract. The indigestible nanocellulose is fermented by gut microbiota, producing metabolites and potentially exhibiting prebiotic activity in intestinal diseases. Additionally, nanocellulose can serve as a matrix material for probiotic protection and show promising prospects for probiotic delivery. In this review, we summarize the classification of nanocellulose, including cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BNC), highlighting their distinct characteristics and applications. We discuss the metabolism-related characteristics of nanocellulose from oral ingestion to colon fermentation and introduce the prebiotic activity of nanocellulose in intestinal diseases. Furthermore, we provide an overview of commonly used nanocellulose-based encapsulation techniques, such as emulsification, extrusion, freeze drying, and spray drying, as well as the delivery systems employing nanocellulose matrix materials, including microcapsules, emulsions, and hydrogels. Finally, we discuss the challenges associated with nanocellulose metabolism, prebiotic functionality, encapsulation techniques, and delivery systems using nanocellulose matrix material for probiotics. This review will provide new insight into the application of nanocellulose in the treatment of intestinal diseases and probiotic delivery.
Sujet(s)
Cellulose , Microbiome gastro-intestinal , Nanoparticules , Probiotiques , Cellulose/composition chimique , Cellulose/métabolisme , Humains , Nanoparticules/composition chimique , Tube digestif/métabolisme , Tube digestif/microbiologie , Animaux , Nanofibres/composition chimique , Fermentation , Prébiotiques/administration et posologie , Systèmes de délivrance de médicaments/méthodesRÉSUMÉ
Previously, we constructed engineered M. circinelloides strains that can not only utilize cellulose, but also increase the yield of γ-linolenic acid (GLA). In the present study, an in-depth analysis of lipid accumulation by engineered M. circinelloides strains using corn straw was to be explored. When a two-stage temperature control strategy was adopted with adding 1.5% cellulase and 15% inoculum, the engineered strains led to increases in the lipid yield (up to 1.56 g per 100 g dry medium) and GLA yield (up to 274 mg per 100 g dry medium) of 1.8- and 2.3-fold, respectively, compared with the control strain. This study proved the engineered M. circinelloides strains, especially for Mc-C2PD6, possess advantages in using corn straw to produce GLA. This work provided a reference for transformation from agricultural cellulosic waste to functional lipid in one step, which might play a positive role in promoting the sustainable development of biological industry.
Sujet(s)
Cellulose 1,4-beta-cellobiosidase , Fermentation , Mucor , Zea mays , Zea mays/métabolisme , Mucor/génétique , Mucor/métabolisme , Mucor/enzymologie , Cellulose 1,4-beta-cellobiosidase/métabolisme , Cellulose 1,4-beta-cellobiosidase/génétique , Acide gamma linolénique/métabolisme , Lipides/biosynthèse , Fatty acid desaturases/métabolisme , Fatty acid desaturases/génétique , Cellulose/métabolisme , Génie métabolique/méthodes , Métabolisme lipidiqueRÉSUMÉ
This study aimed to investigate the biodegradation behaviour of starch/nanocellulose/black tea extract (SNBTE) films in a 30-day soil burial test. The SNBTE films were prepared by mixing commercial starch, nanocellulose (2, 4, and 6%), and an aqueous solution of black tea extract by a simple mixing and casting process. The chemical and morphological properties of the SNBTE films before and after biodegradation were characterized using the following analytical techniques such as field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and fourier transform infrared (FTIR). The changes in soil composition, namely pH, electrical conductivity (EC), moisture content, water holding capacity (WHC), soil respiration, total nitrogen, weight mean diameter (MDW), and geometric mean diameter (GMD), as a result of the biodegradation process, were also estimated. The results showed that the films exhibited considerable biodegradability (35-67%) within 30 days while increasing soil nutrients. The addition of black tea extract reduced the biodegradation rate due to its polyphenol content, which likely resulted in a reduction in microbial activity. The addition of nanocellulose (2-6% weight of starch) increased the tensile strength, but decreased the elongation at break of the films. These results suggest that starch nanocellulose and SNBTE films are not only biodegradable under soil conditions but also positively contribute to soil health, highlighting their potential as an environmentally friendly alternative to traditional plastic films in the packaging industry.
Sujet(s)
Dépollution biologique de l'environnement , Cellulose , Extraits de plantes , Sol , Amidon , Thé , Amidon/composition chimique , Amidon/métabolisme , Sol/composition chimique , Thé/composition chimique , Cellulose/composition chimique , Cellulose/métabolisme , Extraits de plantes/composition chimique , Résistance à la tractionRÉSUMÉ
A novel smart film MP/BNC/ACN for real-time monitoring of fish freshness was developed using myofibrillar protein (MP) and bacterial nanocellulose (BNC) as film raw materials and anthocyanin (Lycium ruthenicum, ACN) as an indicator. Firstly, the film containing 1 % ACN (MP/BNC/ACN1) was found to have a moderate thickness (0.44 ± 0.01 mm) and superior mechanical properties (tensile strength (TS) = 8.53 ± 0.11 MPa; elongation at break (EB) = 24.85 ± 1.38 %) by determining the physical structure. The covalent, electrostatic, and hydrogen bonding interactions between anthocyanin and the film matrix were identified and confirmed by FT-IR spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) analysis. A comprehensive evaluation concluded that MP/BNC/ACN1 exhibited excellent trimethylamine (TMA) sensitivity (total color difference (ΔE), ΔETMA0-1000 = 4.47-31.05; limit of detection (LOD), LOD = 1.03) and UV stability (ΔE96h = 4.16 ± 0.13). The performance of the films in assessing fish freshness was evaluated, principal component analysis (PCA) and hierarchical cluster analysis (HCA) revealed that MP/BNC/ACN1 (ΔE2-10d = 16.84-32.05) could clearly distinguish between fresh (0-2 d), sub-fresh (4-6 d), and spoiled (8-10 d) stages of fish, which corresponded to the film colors of red, light red, and gray-black. In conclusion, this study addresses the limitation that intelligent films cannot visually discern real-time freshness during fish storage and provides a promising approach for real-time fish freshness monitoring.
Sujet(s)
Anthocyanes , Poissons , Emballage alimentaire , Produits de la mer , Animaux , Anthocyanes/analyse , Anthocyanes/composition chimique , Emballage alimentaire/méthodes , Produits de la mer/analyse , Couleur , Spectroscopie infrarouge à transformée de Fourier/méthodes , Cellulose/composition chimique , Myofibrilles/composition chimique , Diffraction des rayons XRÉSUMÉ
The hydrothermal pretreatment process stands out as a pivotal step in breaking down the hemicellulosic fraction of lignocellulosic biomasses, such as sugarcane bagasse and eucalyptus sawdust. This pretreatment step is crucial for preparing these materials for subsequent processes, particularly in food applications. This technique aims to disintegrate plant wall components like cellulose, hemicellulose, and lignin, and facilitating access in later phases such as enzymatic hydrolysis, and ultimately making fermentable sugars available. In this study, sugarcane bagasse and eucalyptus sawdust biomass underwent hydrothermal pretreatment at specific conditions, yielding two key components: dry biomass and hemicellulose liquor. The primary focus was to assess the impact of hydrothermal pretreatment followed by enzymatic hydrolysis, using the Celic Ctec III enzyme cocktail, to obtain fermentable sugars. These sugars were then transformed into membranes via strain Gluconacetobacter xylinus bacterial biosynthesis. Notably, the addition of a nitrogen source significantly boosted production to 14.76 g/ in hydrolyzed sugarcane bagasse, underscoring its vital role in bacterial metabolism. Conversely, in hydrolyzed eucalyptus, nitrogen source inclusion unexpectedly decreased yield, highlighting the intricate interactions in fermentation media and the pivotal influence of nitrogen supplementation. Characterization of membranes obtained in synthetic and hydrolyzed media through techniques such as FEG-SEM, FTIR, and TGA, followed by mass balance assessment, gauged their viability on an industrial scale. This comprehensive study aimed not only to understand the effects of pretreatment and enzymatic hydrolysis but to also evaluate the applicability and sustainability of the process on a large scale, providing crucial insights into its feasibility and efficiency in practical food-related scenarios, utilizing nanocellulose bacterial (BNC) as a key component.
Sujet(s)
Biomasse , Cellulose , Eucalyptus , Lignine , Saccharum , Lignine/composition chimique , Lignine/métabolisme , Cellulose/composition chimique , Cellulose/métabolisme , Hydrolyse , Eucalyptus/composition chimique , Saccharum/composition chimique , Fermentation , Gluconacetobacter xylinus/métabolisme , Polyosides/composition chimique , Polyosides/métabolismeRÉSUMÉ
Non-centrifugal raw cane sugar (NRCS) is a minimally processed product from sugarcane (Saccharum officinarum L). This product contains phytochemical and nutritional compounds that benefit human health. Despite these advantages, NRCS commercialization is hindered by a lack of knowledge about its composition and, consequently, the absence of quality standards. Studies associating the nutritional composition of sugarcane varieties and their genuine products have not yet been found in the literature, and understanding this relationship can help establish quality standards for this product. Therefore, this study evaluated the mineral nutritional composition of genuine derivative NRCS produced from two sugarcane varieties obtained under different agronomic conditions at two stages of maturation to verify the relationships between raw material and the product. The obtained sugarcanes, juices, and bagasse, as well as the produced sugars, were analyzed for mineral content, such as calcium, magnesium, potassium, phosphorus, sulfur, iron, manganese, copper, and zinc, using inductively coupled plasma optical emission spectrometry. Most mineral constituents of sugarcane are in the juice in direct proportions to those in raw sugarcane. Thus, minimally processed food derivatives have nutritional characteristics equivalent to the raw materials. Consumption of NRCS contributes to meeting daily requirements for essential nutrients such as magnesium, copper, potassium, and manganese. For manganese, 25 g of NRCS, like the one produced in this study, can fulfill 22 to 76 % of an adult male's daily mineral requirements. The variation observed in the four NRCS samples, obtained from the same sugarcane variety under different maturation and agronomic conditions, was 250 %. This variation makes establishing quality parameters for mineral or ash content difficult. Therefore, setting mineral content levels for NRCS is inappropriate, as this parameter naturally depends on the raw material.
Sujet(s)
Minéraux , Valeur nutritive , Saccharum , Saccharum/composition chimique , Minéraux/analyse , Cellulose/analyse , Cellulose/composition chimique , Manipulation des aliments/méthodesRÉSUMÉ
Significant volumes of agricultural and industrial waste are produced annually. With the global focus shifting towards sustainable and environmentally friendly practices, there is growing emphasis on recycling and utilizing materials derived from such waste, such as cellulose and lignin. In response to this imperative situation, nanocellulose materials have surfaced attracting heightened attention and research interest owing to their superior properties in terms of strength, stiffness, biodegradability, and water resistance. The current manuscript provided a comprehensive review encompassing the resources of nanocellulose, detailed pretreatment and extraction methods, and present applications of nanocellulose. More importantly, it highlighted the challenges related to its processing and utilization, along with potential solutions. After evaluating the benefits and drawbacks of different methods for producing nanocellulose, ultrasound combined with acid hydrolysis emerges as the most promising approach for large-scale production. While nanocellulose has established applications in water treatment, its potential within the food industry appears even more encouraging. Despite the numerous potential applications across various sectors, challenges persist regarding its modification, characterization, industrial-scale manufacturing, and regulatory policies. Overcoming these obstacles requires the development of new technologies and assessment tools aligned with policy. In essence, nanocellulose presents itself as an eco-friendly material with extensive application possibilities, prompting the need for additional research into its extraction, application suitability, and performance enhancement. This review focused on the wide application scenarios of nanocellulose, the challenges of nanocellulose application, and the possible solutions.
Sujet(s)
Agriculture , Cellulose , Déchets industriels , Cellulose/composition chimique , Recyclage , Nanostructures/composition chimique , HydrolyseRÉSUMÉ
BACKGROUND AND OBJECTIVES: Nanosponges are one of the most innovative ways to use the newest developments in nanodrugs delivery. Nanosponges can catch drugs that dissolve in water or ones that don't. This work uses statistical design to find the best nanosponges for drugs that don't dissolve easily and make them. MATERIAL AND METHODS: It was looked into how to statistically make the most of the effects of independent factors. The ethyl cellulose ratio and stirring rate were chosen based on how they affected the dependent variables, such as particle size and how well they were trapped. FTIR, SEM, zeta potential, entrapment efficiency, and particle size data were used to test the nanosponges that were made. Using carbopol, the best lot of nanosponges was added to the gel. RESULTS: Using ethyl cellulose and polyvinyl alcohol as stabilizers in the emulsion liquid diffusion method, it was possible to make drug-loaded nanosponges. It was possible to make the nanosponges composition work better by using Central Composite Design. It has been seen that making drug-filled nanosponges improves stability. CONCLUSION: The study showcased the enhanced capacity of a formulation with decreased particle size and high entrapment efficiency to disseminate effectively.
Sujet(s)
Taille de particule , Cellulose/composition chimique , Cellulose/analogues et dérivés , Solubilité , Nanoparticules/composition chimique , Eau/composition chimique , Systèmes de délivrance de médicaments , Émulsions/composition chimiqueRÉSUMÉ
Vulvovaginal candidiasis (VVC) alters the innate cervicovaginal immunity, which provides an important barrier against viruses and other infections. The incidence of this disease has not decreased in the last 30 years, so effective treatments are still needed. Nanoparticles (NPs) of cellulose acetate phthalate (CAP) and clotrimazole (CLZ) were prepared by the emulsification-diffusion method. NPs were characterized using dynamic light scattering, atomic force microscopy and differential scanning calorimetry; their release profile was determined by the dialysis bag technique and mucoadhesion was evaluated with the mucin-particle method. The growth inhibition study of Candida albicans was carried out using the plate counting technique. Finally, accelerated physical stability tests of NPs were carried out, both in water and in SVF. The CAP-CLZ NPs had an average diameter of 273.4 nm, a PDI of 0.284, smooth surfaces and spherical shapes. In vitro release of CLZ from the CAP NPs was categorized with the Weibull model as a matrix system in which initial release was rapid and subsequently sustained. The inhibition of C. albicans growth by the CAP-CLZ NPs was greater than that of free CLZ, and the CAP-only NPs had a microbicidal effect on C. albicans. The NPs showed poor mucoadhesiveness, which could lead to studies of their mucopenetration capacities. An accelerated physical stability test revealed the erosion of CAP in aqueous media. A nanoparticulate system was developed and provided sustained release of CLZ, and it combined an antifungal agent with a microbial polymer that exhibited antifungal activity against C. albicans.
Sujet(s)
Antifongiques , Candida albicans , Candidose vulvovaginale , Cellulose , Clotrimazole , Nanoparticules , Clotrimazole/administration et posologie , Clotrimazole/pharmacologie , Candidose vulvovaginale/traitement médicamenteux , Nanoparticules/composition chimique , Candida albicans/effets des médicaments et des substances chimiques , Femelle , Cellulose/composition chimique , Cellulose/analogues et dérivés , Antifongiques/pharmacologie , Antifongiques/administration et posologie , Polymères/composition chimique , Taille de particule , Tests de sensibilité microbienne/méthodes , Libération de médicamentRÉSUMÉ
In the current study, nickel oxide nanoparticles (NiO NPs) modified with dimethylglyoxime (DMG) were deposited onto the cellulose surface (Ni(DMG)2-NiO-Cell) and used as an efficient adsorbent for thin film microextraction (TFME) of tramadol (TRA). The extracted TRA was determined using a high-performance liquid chromatography-ultraviolet detector (HPLC-UV). NiO NPs were synthesized by co-precipitation method on the surface of the cellulose substrate; afterward, its surface was modified by DMG to increase the extraction capability of the thin film toward TRA. The synthesized NiO-Cell and Ni(DMG)2-NiO-Cell thin films were characterized using various techniques. The effect of modification of the NiO thin film with DMG reagent on the extraction efficiency was investigated. The crucial parameters influencing the extraction efficiency, including extraction time, desorption time, desorption solvent, pH and salt content, were investigated via a one-at-a-time approach. The figures of merit for the developed method were evaluated in urine, plasma, and deionized water under the optimized extraction and desorption condition. The limits of detection and limits of quantification were in the range of 0.1 to 1 ng mL-1 and 0.3 to 3 ng mL-1, respectively, for the studied samples. The linear dynamic ranges of the developed TFME-HPLC-UV method were 0.3-1000, 1-2500, and 3-5000 ng mL-1 for the deionized water, urine, and plasma samples, respectively. The reproducibility and repeatability of the developed method was assayed in terms of intra-day, inter-day, and inter-thin film precisions by conducting six-replicate experiments at the concentration level of 0.1 and 1 µg mL-1, which were in the range of 5.9% to 8.3%. The sufficiency and applicability of the developed TFME-HPLC-UV method was investigated by determining TRA in urine and plasma samples, and the resulting relative recoveries (RR%) were 85.9% and 91.7%, respectively.
Sujet(s)
Cellulose , Nickel , Oximes , Tramadol , Chromatographie en phase liquide à haute performance/méthodes , Tramadol/urine , Tramadol/sang , Tramadol/analyse , Tramadol/composition chimique , Humains , Cellulose/composition chimique , Nickel/composition chimique , Nickel/sang , Nickel/urine , Oximes/composition chimique , Adsorption , Nanoparticules métalliques/composition chimique , Limite de détection , Microextraction en phase solide/méthodes , Reproductibilité des résultatsRÉSUMÉ
This study reports on the modification of bacterial cellulose (BC) membranes produced by static fermentation of Komagataeibacter xylinus bacterial strains with graphene oxide-silver nanoparticles (GO-Ag) to yield skin wound dressings with improved antibacterial properties. The GO-Ag sheets were synthesized through chemical reduction with sodium citrate and were utilized to functionalize the BC membranes (BC/GO-Ag). The BC/GO-Ag composites were characterized to determine their surface charge, morphology, exudate absorption, antimicrobial activity, and cytotoxicity by using fibroblast cells. The antimicrobial activity of the wound dressings was assessed against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The results indicate that the BC/GO-Ag dressings can inhibit â¼70% of E. coli cells. Our findings also revealed that the porous BC/GO-Ag antimicrobial dressings can efficiently retain 94% of exudate absorption after exposure to simulated body fluid (SBF) for 24 h. These results suggest that the dressings could absorb excess exudate from the wound during clinical application, maintaining adequate moisture, and promoting the proliferation of epithelial cells. The BC/GO-Ag hybrid materials exhibited excellent mechanical flexibility and low cytotoxicity to fibroblast cells, making excellent wound dressings able to control bacterial infectious processes and promote the fast healing of dermal lesions.
Sujet(s)
Antibactériens , Matériaux biocompatibles , Cellulose , Escherichia coli , Graphite , Test de matériaux , Nanoparticules métalliques , Tests de sensibilité microbienne , Argent , Staphylococcus aureus , Cicatrisation de plaie , Graphite/composition chimique , Graphite/pharmacologie , Argent/composition chimique , Argent/pharmacologie , Cicatrisation de plaie/effets des médicaments et des substances chimiques , Cellulose/composition chimique , Cellulose/pharmacologie , Nanoparticules métalliques/composition chimique , Antibactériens/composition chimique , Antibactériens/pharmacologie , Staphylococcus aureus/effets des médicaments et des substances chimiques , Escherichia coli/effets des médicaments et des substances chimiques , Matériaux biocompatibles/composition chimique , Matériaux biocompatibles/pharmacologie , Taille de particule , Pseudomonas aeruginosa/effets des médicaments et des substances chimiques , Gluconacetobacter xylinus/composition chimique , Humains , Souris , Bandages , AnimauxRÉSUMÉ
Hydroxyl groups on the surface of cellulose nanocrystals (CNC) are modified by chemical methods, CNC and the modified CNC are used as fillers to prepare PHB/cellulose nanocomposites. The absorption peak of carbonyl group of the modified CNC (CNC-CL and CNC-LA) appears in the FT-IR spectra, which proves that the modifications are successful. Thermal stability of CNC-CL and CNC-LA is better than that of pure CNC. Pure CNC is beneficial to the nucleation of PHB, while CNC-CL and CNC-LA inhibit the nucleation of PHB. The spherulite size of PHB and its nanocomposites increases linearly over time, and the maximum growth rate of PHB spherulite exists at 90 °C. Rheological analysis shows that viscous deformation plays the dominant role in PHB, PHBC and PHBC-CL samples, while the elastic deformation is dominant in PHBC-LA. According to the rheological data, the dispersion of CNC-CL and CNC-LA in PHB is better than that of CNC. This work demonstrates the impact of modified CNC on the crystallization and viscoelastic properties of PHB. Moreover, the interface enhancement effect of modified CNC on PHB/CNC nanomaterials is revealed from the crystallization and rheology perspectives.
Sujet(s)
Cellulose , Cristallisation , Hydroxy-butyrates , Nanoparticules , Polyesters , Rhéologie , Cellulose/composition chimique , Nanoparticules/composition chimique , Hydroxy-butyrates/composition chimique , Polyesters/composition chimique , Propriétés de surface , Nanocomposites/composition chimique , Spectroscopie infrarouge à transformée de Fourier , Viscosité , Température ,RÉSUMÉ
Fiber-shaped Zn-ion capacitors (FSZICs) have shown great potential in wearable electronics due to their long cycle life, high energy density, and good flexibility. Nevertheless, it is still a critical challenge to develop a conductive fiber with long size and high mechanical properties as the FSZIC cathode using sustainable and low-cost materials. Herein, regenerated cellulose (RC) -based conductive microfibers are prepared by a simple, continuous, and scalable wet spinning process. The 3D nanoporous networks of RC caused by physical self-cross-linking allow MXene and MnO2 to be uniformly and firmly embedded. The rapid extrusion and limited drying result in the highly aligned structure of the fibers, endowing the hybrid fiber with an ultra-high tensile strength (145.83 Mpa) and Young's modulus (1672.11 Mpa). MXene/MnO2-RC-based FSZIC demonstrates a high specific capacitance of 110.01 mF cm-3, an energy density of 22.0 mWh cm-3 at 0.57 A cm-3 and excellent cycling stability with 90.5 % capacity retention after 5000 cycles. This work would lead to a great potential of cellulose for application in next-generation green and wearable electronics.