Oxides for Rectenna Technology.

The quest to harvest untapped renewable infrared energy sources has led to significant research effort in design, fabrication and optimization of a self-biased rectenna that can operate without external bias voltage. At the heart of its design is the engineering of a high-frequency rectifier that can convert terahertz and infrared alternating current (AC) signals to usable direct current (DC). The Metal Insulator Metal (MIM) diode has been considered as one of the ideal candidates for the rectenna system. Its unparalleled ability to have a high response time is due to the fast, femtosecond tunneling process that governs current transport. This paper presents an overview of single, double and triple insulator MIM diodes that have been fabricated so far, in particular focusing on reviewing key figures of merit, such as zero-bias responsivity (ß0), zero-bias dynamic resistance (R0) and asymmetry. The two major oxide contenders for MInM diodes have been NiO and Al2O3, in combination with HfO2, Ta2O5, Nb2O5, ZnO and TiO2. The latter oxide has also been used in combination with Co3O4 and TiOx. The most advanced rectennas based on MI2M diodes have shown that optimal (ß0 and R0) can be achieved by carefully tailoring fabrication processes to control oxide stoichiometry and thicknesses to sub-nanometer accuracy.

Silver Ink Formulations for Sinter-free Printing of Conductive Films.

Inkjet printing offers an attractive method for the deposition of metal interconnects in electronic systems and enables a low-cost, environmentally friendly route to manufacture. However, virtually all current metal inkjet processes require post-deposition sintering treatments to achieve the optimum electrical conductivity, because the growth mechanism involves coalescence of discrete nanoparticles. A manufacturing process that reduces the number of steps by directly printing silver, removing the need to sinter the printed metal, would be highly advantageous. Here we describe a, sinter-free process that results in the direct printing of crystalline silver. This process exploits the chemistries developed for Atomic Layer Deposition (ALD), to form the basis of a new ink formulation, which we term; Reactive Organometallic inks (ROM). These ROM ink formulations are capable of depositing low temperature, high conductivity metal films, without the need for subsequent sintering treatments. To reduce the temperature for direct formation of metallic Ag, we have added an alcohol as a catalytic reducing agent to dissociate the organometallic component. Silver films printed from our novel ROM ink, on a glass substrate at 120 °C, are electrically conductive with a typical resistivity as low as 39.2% that of bulk silver, without the need for sintering.

Hysteresis in Lanthanide Zirconium Oxides Observed Using a Pulse CV Technique and including the Effect of High Temperature Annealing.

A powerful characterization technique, pulse capacitance-voltage (CV) technique, was used to investigate oxide traps before and after annealing for lanthanide zirconium oxide thin films deposited on n-type Si (111) substrates at 300 °C by liquid injection Atomic Layer Deposition (ALD). The results indicated that: (1) more traps were observed compared to the conventional capacitance-voltage characterization method in LaZrOx; (2) the time-dependent trapping/de-trapping was influenced by the edge time, width and peak-to-peak voltage of a gate voltage pulse. Post deposition annealing was performed at 700 °C, 800 °C and 900 °C in N2 ambient for 15 s to the samples with 200 ALD cycles. The effect of the high temperature annealing on oxide traps and leakage current were subsequently explored. It showed that more traps were generated after annealing with the trap density increasing from 1.41 × 1012 cm-2 for as-deposited sample to 4.55 × 1012 cm-2 for the 800 °C annealed one. In addition, the leakage current density increase from about 10-6 A/cm² at Vg = +0.5 V for the as-deposited sample to 10-3 A/cm² at Vg = +0.5 V for the 900 °C annealed one.

Electrical Properties and Interfacial Studies of HfxTi1-xO2 High Permittivity Gate Insulators Deposited on Germanium Substrates.

In this research, the hafnium titanate oxide thin films, TixHf1-xO2, with titanium contents of x = 0, 0.25, 0.9, and 1 were deposited on germanium substrates by atomic layer deposition (ALD) at 300 °C. The approximate deposition rates of 0.2 Å and 0.17 Å per cycle were obtained for titanium oxide and hafnium oxide, respectively. X-ray Photoelectron Spectroscopy (XPS) indicates the formation of GeOx and germanate at the interface. X-ray diffraction (XRD) indicates that all the thin films remain amorphous for this deposition condition. The surface roughness was analyzed using an atomic force microscope (AFM) for each sample. The electrical characterization shows very low hysteresis between ramp up and ramp down of the Capacitance-Voltage (CV) and the curves are indicative of low trap densities. A relatively large leakage current is observed and the lowest leakage current among the four samples is about 1 mA/cm² at a bias of 0.5 V for a Ti0.9Hf0.1O2 sample. The large leakage current is partially attributed to the deterioration of the interface between Ge and TixHf1-xO2 caused by the oxidation source from HfO2. Consideration of the energy band diagrams for the different materials systems also provides a possible explanation for the observed leakage current behavior.

Review on Non-Volatile Memory with High-k Dielectrics: Flash for Generation Beyond 32 nm.

Flash memory is the most widely used non-volatile memory device nowadays. In order to keep up with the demand for increased memory capacities, flash memory has been continuously scaled to smaller and smaller dimensions. The main benefits of down-scaling cell size and increasing integration are that they enable lower manufacturing cost as well as higher performance. Charge trapping memory is regarded as one of the most promising flash memory technologies as further down-scaling continues. In addition, more and more exploration is investigated with high-k dielectrics implemented in the charge trapping memory. The paper reviews the advanced research status concerning charge trapping memory with high-k dielectrics for the performance improvement. Application of high-k dielectric as charge trapping layer, blocking layer, and tunneling layer is comprehensively discussed accordingly.

Hysteresis in Lanthanide Aluminum Oxides Observed by Fast Pulse CV Measurement.

Oxide materials with large dielectric constants (so-called high-k dielectrics) have attracted much attention due to their potential use as gate dielectrics in Metal Oxide Semiconductor Field Effect Transistors (MOSFETs). A novel characterization (pulse capacitance-voltage) method was proposed in detail. The pulse capacitance-voltage technique was employed to characterize oxide traps of high-k dielectrics based on the Metal Oxide Semiconductor (MOS) capacitor structure. The variation of flat-band voltages of the MOS structure was observed and discussed accordingly. Some interesting trapping/detrapping results related to the lanthanide aluminum oxide traps were identified for possible application in Flash memory technology. After understanding the trapping/detrapping mechanism of the high-k oxides, a solid foundation was prepared for further exploration into charge-trapping non-volatile memory in the future.

Ce(IV) complexes with donor-functionalized alkoxide ligands: improved precursors for chemical vapor deposition of CeO2.

Thin films of ceria (CeO(2)) have many applications, and their synthesis by liquid-injection MOCVD (metal-organic chemical vapor deposition) or ALD (atomic layer deposition) requires volatile precursor compounds. Here we report the synthesis of a series of homoleptic and heteroleptic Ce(IV) complexes with donor-functionalized alkoxide ligands mmp (1-methoxy-2-methylpropan-2-olate), dmap (1-(dimethylamino)propan-2-olate), and dmop (2-(4,4-dimethyl-4,5-dihydrooxazol-2-yl)propan-2-olate) and their potential as precursors for MOCVD and ALD of CeO(2). New complexes were synthesized by alcohol exchange reactions with [Ce(OBu(t))(4)]. [Ce(mmp)(4)] and [Ce(dmap)(4)] were both found to be excellent precursors for liquid-injection MOCVD of CeO(2), depositing high purity thin films with very low carbon contamination, and both have a large temperature window for diffusion controlled growth (350-600 °C for [Ce(mmp)(4)]; 300-600 °C for [Ce(dmap)(4)]). [Ce(mmp)(4)] is also an excellent precursor for liquid-injection ALD of CeO(2) using H(2)O as oxygen source and demonstrates self-limiting growth from 150 to 350 °C. [Ce(dmap)(4)] has lower thermal stability than [Ce(mmp)(4)] and does not show self-limiting growth in ALD. Heteroleptic complexes show a tendency to undergo ligand redistribution reactions to form mixtures in solution and are unsuitable as precursors for liquid-injection CVD.

Linear ion trap fabricated using rapid manufacturing technology.

This article presents the design, construction, and test results of a linear ion trap, fabricated using digital light processing (DLP), which is a low-cost 3D layer-based manufacturing technique. The ion trap was incorporated into a portable mass spectrometer system and experimental mass spectrum was obtained for methamphetamine (m/z 182), cocaine (m/z 304), and rhodamine B (m/z 443), with a maximum observed resolution (FWHM) of 260. For rhodamine B, tandem MS capability is also demonstrated. The mass range (and resolution at higher m/z) of the instrument is also demonstrated by spectrum obtained from Ultramark (m/z 1621). The spectra obtained for the DLP trap occur at a considerably lower rf voltage than a rectilinear ion trap of similar size, which is a consequence of the hyperbolic electrode geometry and, hence, smaller r(0) in the DLP case. High mass range with low voltage operation is especially important with regard to 'in the field' applications requiring low power consumption for extended periods of operation.

Development of quadrupole mass spectrometers using rapid prototyping technology.

In this report, we present a prototype design of a quadrupole mass filter (QMF) with hyperbolic electrodes, fabricated at the University of Liverpool using digital light processing (DLP), a low-cost and lightweight 3D rapid prototyping (RP) technique. Experimental mass spectra are shown for H(2)(+), D(2)(+), and He(+) ions to provide proof of principle that the DLP mass filter is working as a mass analyzer in the low-mass range (1 to 10 amu). The performance of the DLP QMF has also been investigated for individual spectral peaks. Numerical simulations of the instrument were performed by coupling CPO and Liverpool QMS-2 programs to model both the ion source and mass filter, respectively, and the instrument is shown to perform as predicted by theory. DLP thus allows miniaturization of mass spectrometers at low cost, using hyperbolic (or other) geometries of mass analyzer electrodes that provide optimal ion manipulation and resolution for a given application. The potential of using RP fabrication techniques for developing miniature and microscale mass analyzers is also discussed.

Precursors for MOCVD and ALD of rare earth oxides-complexes of the early lanthanides with a donor-functionalized alkoxide ligand.

Complexes of the early lanthanides with the donor-functionalized alkoxide ligand mmp (Hmmp = HOCMe(2)CH(2)OMe, 1-methoxy-2-methylpropan-2-ol) are excellent precursors for Metal Organic Chemical Vapor Deposition (MOCVD) and Atomic Layer Deposition (ALD) of lanthanide oxides; however, their coordination chemistry, which is the subject of this paper, is rather complex. Precursors for MOCVD and ALD of lanthanide oxides are prepared by the reaction of [Ln{N(SiMe(3))(2)}(3)] with 3 equiv of the alcohol Hmmp in toluene in the presence of 1 equiv of tetraglyme and are indefinitely stable in solution. Reaction of [Ln{N(SiMe(3))(2)}(3)] with 3 equiv of Hmmp in the absence of stabilizing Lewis bases gives complex condensed products with empirical formula [{Ln(mmp)(3-n)}(2)O(n)]. These condensed products show poor volatility and are unsatisfactory precursors for MOCVD or ALD of oxides. The cluster complex [La(3)(mu(3),kappa(2)-mmp)(2)(mu(2),kappa(2)-mmp)(3)(mmp)(4)] has been prepared by careful reaction of [La{N(SiMe(3))(2)}(3)] with 4 equiv of Hmmp and has been characterized by single-crystal X-ray diffraction. Salt metathesis reactions using M(mmp) (M = Li or Na) are unreliable routes to [Ln(mmp)(3)]. Crystals of the heterometallic cluster complex [NaLa(3)(mu(3)-OH)(mu(3),kappa(2)-mmp)(2)(mu(2),kappa(2)-mmp)(4)(mmp)(3)] were isolated from the reaction of [La(NO(3))(3)(tetraglyme)] with 3 equiv of Na(mmp), and crystals of [Li(kappa(2)-Hmmp)Pr(mu(2),eta(2)-mmp)(4))LiCl] were isolated from the reaction of PrCl(3) with 3 equiv of Li(mmp); both of these complexes have been characterized by single-crystal X-ray diffraction.

Photochemistry of refractive index structures in poly(methyl methacrylate) by femtosecond laser irradiation.

Femtosecond, subablation threshold photomodification of poly(methyl methacrylate) (PMMA) at 387 nm is explored to enable fabrication of optical components. Volatile fragment analysis (thermal desorption gas chromatography-mass spectrometry) and molecular weight distribution monitoring (size exclusion chromatography) suggest photochemical modification, involving direct cleavage of the polymer backbone and propagation via chain unzipping under formation of monomers, similar to the pyrolytic degradation of PMMA. Waveguides were produced in undoped, clinical-grade PMMA, showing an increased refractive index in the laser focal region (Dnmax=4x10(-3)).

A first transition series pseudotetrahedral oxynitride anion: synthesis and characterization of Ba(2)VO(3)N.

Ammonolysis of reactive oxide precursors affords the vanadium(V) phase Ba(2)VO(3)N that is shown by X-ray and neutron powder diffraction and Raman spectroscopy to contain pseudotetrahedral VO(3)N(4-) anions. This is the first example of such species for the first transition series metals.