A case of lepromatous leprosy in a background of chronic hepatitis B infection.

Leprosy is a chronic granulomatous infection that primarily affects developing and underdeveloped countries. Co-infection with the hepatitis B virus can complicate its natural course by altering the host immune system response and thereby the disease outcomes. Early detection and treatment of the disease is thus imperative for preventing debilitating deformities. Several studies have shown positive viral markers for human immunodeficiency virus (HIV) and hepatitis B in patients with leprosy. However, in the Indian subcontinent, we have limited evidence highlighting this correlation. We present a case of a 42-year-old male with chronic hepatitis B infection presenting with new-onset lepromatous leprosy. The patient was successfully managed with a multibacillary multidrug regimen. In patients with hepatitis B co-infection, clinicians must be vigilant about the higher risk of complications and poorer patient outcomes. Extensive longitudinal studies assessing the correlation between leprosy and hepatitis B in India can help tailor future guidelines for management.

Nanofabrication of citronellal with chitosan biopolymer to boost its efficacy against aflatoxin B1 and Aspergillus flavus mediated biodeterioration of active ingredient of Piper longum.

The study reports the efficacy of nanofabricated citronellal inside the chitosan biopolymer (NeCn) against Aspergillus flavus growth, aflatoxin B1 (AFB1) production, and active ingredient biodeterioration (Piperine) in Piper longum L. The prepared NeCn was characterized by Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), and Fourier Transform Infrared Spectroscopy (FTIR). The results revealed that the NeCn exhibited distantly improved antifungal (1.25 µL/mL) and AFB1 inhibition (1.0 µL/mL) compared to free Cn. The perturbances in membrane function, mitochondrial membrane potential, antioxidant defense system, and regulatory genes (Ver-1 and Nor-1) of AFB1 biosynthesis were reported as probable modes of action of NeCn. The NeCn (1.25 µL/mL) effectively protects the P. longum from A. flavus (78.8%), AFB1 contamination (100%), and deterioration of Piperine (62.39%), thus demonstrating its potential as a promising novel antifungal agent for food preservation.

Assessment of Trachyspermum ammi essential oil against Aspergillus flavus, aflatoxin B1 contamination, and post-harvest quality of Sorghum bicolor.

The present investigation explored the antifungal effectiveness of Trachyspermum ammi essential oil (TAEO) against Aspergillus flavus, aflatoxin B1 (AFB1) contamination, and its mechanism of action using biochemical and computational approaches. The GC-MS result revealed the chemical diversity of TAEO with the highest percentage of γ-terpinene (39 %). The TAEO exhibited minimum inhibitory concentration against A. flavus growth (0.5 µL/mL) and AFB1 (0.4 µL/mL) with radical scavenging activity (IC50 = 2.13 µL/mL). The mechanism of action of TAEO was associated with the alteration in plasma membrane functioning, antioxidative defense, and carbon source catabolism. The molecular dynamic result shows the multi-regime binding of γ-terpinene with the target proteins (Nor1, Omt1, and Vbs) of AFB1 biosynthesis. Furthermore, TAEO exhibited remarkable in-situ protection of Sorghum bicolor seed samples against A. flavus and AFB1 contamination and protected the nutritional deterioration. Hence, the study recommends TAEO as a natural antifungal agent for food protection against A. flavus mediated biodeterioration.

Essential oils as green promising alternatives to chemical preservatives for agri-food products: New insight into molecular mechanism, toxicity assessment, and safety profile.

Microbial food spoilage caused by food-borne bacteria, molds, and associated toxic chemicals significantly alters the nutritional quality of food products and makes them unpalatable to the consumer. In view of potential adverse effects (resistance development, residual toxicity, and negative effects on consumer health) of some of the currently used preservative agents and consumer preferences towards safe, minimally processed, and chemical-free products, food industries are looking for natural alternatives to the chemical preservatives. In this context, essential oils (EOs) showed broad-range antimicrobial effectiveness, low toxicity, and diverse mechanisms of action, and could be considered promising natural plant-based antimicrobials. The existing technical barriers related to the screening of plants, extraction methods, characterization, dose optimization, and unpredicted mechanism of toxicity in the food system, could be overcome using recent scientific and technological advancements, especially bioinformatics, nanotechnology, and mathematical approaches. The review focused on the potential antimicrobial efficacy of EOs against food-borne microbes and the role of recent scientific technology and social networking platform in addressing the major obstacles with EOs-based antimicrobial agents. In addition, a detailed mechanistic understanding of the antimicrobial efficacy of EOs, safety profile, and risk assessment using bioinformatics approaches are summarized to explore their potential application as food preservatives.

Estimation of human somatype using inter-canine and inter-premolar distances of the maxillary arch.

Context: The establishment of a correlation between tooth dimensions and body size is crucial within the realm of forensic odontology. While numerous investigations have focused on the association between tooth morphology or width and stature, limited reports exist regarding the correlation between overall body structure or build and odontogenic parameters. This study focuses on finding a correlation between inter-arch dimensions and the body build of an individual. Aims: This study aimed to examine the potential correlation between an individual's somatotype (body build) and the measurements of inter-canine and inter-premolar maxillary arch widths. Study Settings: Dayananda Sagar College of Dental Sciences. Study Design: A cross-sectional study. Methods and Material: The sample size of the study was 153 individuals aged 18-25 years. Impressions for the maxillary arch were taken, study models were made and inter-arch measurements were taken using a digital Vernier calliper. For body build measurements, Heath-Carter somatotype measuring technique was used. The collected data were entered into an Excel sheet, and statistical analysis was done. Statistical Analysis Used: Principal component analysis. Results: On using principal component analysis, it was seen that there exists no correlation between body build of an individual when compared to inter-canine and inter-premolar distances. Conclusions: While no positive correlation has been seen between the odontometric parameters and specific body type, it can be argued that this can be due to the cited limitations of the study. Hence, we conclude with the note that a more detailed study would offer more viable and credible results.

Insights into the antimicrobial efficacy of Coleus aromaticus essential oil against food-borne microbes: Biochemical and molecular simulation approaches.

The study reported the antimicrobial efficacy of chemically characterized Coleus aromaticus essential oil (CEO) against food-borne bacteria, molds (Aspergillus flavus), aflatoxin B1 (AFB1) and explored its mechanism of action using biochemical and molecular simulation approaches. The chemical profile of CEO was explored by Gas chromatography-mass spectrometry (GC-MS) analysis, which revealed thymol (46.0%) as the major compound. The minimum inhibitory concentration values of CEO for bacterial species Escherichia coli, Salmonella enterica, Bacillus cereus, and Shigella flexneri was found to be 0.9 µl/ml, 0.7 µl/ml, 0.16 µl/ml, and 0.12 µl/ml respectively. The MIC value for A. flavus and AFB1 contamination was 0.6 µl/ml. The DPPH radical scavenging activity of CEO was recorded with IC50 0.32 µl/ml. Biochemical and computational approaches (docking and dynamics simulation) have been performed to explore the multi-faceted antimicrobial inhibitory effects of CEO at the molecular level, which shows the impairment in membrane functioning, leakage of cellular contents, release of 260-nm absorbing materials, antioxidative defense, carbon catabolism and vital genes (7AP3, Nor1, Omt1, and Vbs). The findings indicated that CEO could be used as natural antimicrobial agents against food-spoilage bacteria, A. flavus and AFB1 contamination to extend the shelf-life of food product and prevention of food-borne diseases.

Synthesis, characterization, and assessment of chitosan-nanomatrix enriched with antifungal formulation against biodeterioration of active ingredients of selected herbal raw materials.

Aflatoxin B1 (AFB1), a potent natural group 1 carcinogen produced by Aspergillus flavus is considered an unavoidable toxic contaminant of herbal raw materials, which often deteriorates their active ingredients making them less effective and hazardous during their formulation in herbal drugs. The present investigation reports the antifungal (0.5 µl/ml) and AFB1 inhibitory (0.4 µl/ml) effects of the developed formulation CIM based on a mixture of essential oils (Carum carvi, and Illicium verum), and methyl anthranilate using mathematical modeling. The insight into the mechanism of action has also been explored using biochemical, molecular docking, and RT-PCR. Further, the nanoencapsulation of CIM (Ne-CIM) was prepared using a green facile synthesis of chitosan-based nanomatrix and characterized by Dynamic light scattering (DLS), Fourier transform-infrared, (FTIR), and X-ray diffraction analysis (XRD). The in-situ results showed that at MIC doses Ne-CIM effectively controls the A. flavus (81.25-89.57 %), AFB1 contamination (100 %), and protects the active ingredients deterioration of Piper nigrum, P. longum, Andrographis paniculata, Silybum marianum, and Withania somnifera caused by toxigenic species of A. flavus without affecting their sensory properties. Hence, Ne-CIM could be used as a green chemical agent to protect the biodeterioration of active ingredients of herbal raw materials caused by toxigenic species of A. flavus.

Recent advancement in functional properties and toxicity assessment of plant-derived bioactive peptides using bioinformatic approaches.

Nowadays, biopeptides have gained considerable interest by the food industries, given their potent biological effect on health. BPs, when released from the sequence of their precursors by proteolytic enzymes, improved the various physiological functions of the body. Diabetic and hypertension are the two most common life-threatening diseases linked to dietary patterns. Angiotensin-converting enzyme (ACE) (hypertension-responsible glycoprotein) and dipeptidyl peptidase IV (DPP-IV) (proline-specific dimeric aminopeptidase) have been widely used as molecular target sites of action of bioactive compounds possessing antihypertensive and antidiabetic effects. Although, BPs possess considerable biological properties (antioxidant, antimicrobial, antiviral, immunomodulating, antiproliferative, antidiabetic, and antihypertensive effects), most of them possess inherent lacunae such as toxicity, allergenicity, bitterness, and lack of detailed mechanistic investigation, limiting their commercial application. The present review provides an overview on various sources of bioactive peptides, conventional and modern methods of extraction, and challenges that need to be addressed before its commercial application. In addition, bioinformatics' role in exploring the functional properties of biopeptides (ACE and DPP-IV inhibitory effects) toxicity, the target site of action with special reference to plant-based peptides, and recent burgeoning proficiencies in biopeptide research have been discussed.

Solution-processed CZTS thin films and its simulation study for solar cell applications with ZnTe as the buffer layer.

Using zinc tellurium (ZnTe) as the buffer layer in the Cu2ZnSnS4 (CZTS)-based solar cells showed an improvement in overall efficiency. ZnTe is investigated as an alternative to replace the conventional toxic Cd-contained buffer layers. It may also reduce the overall cost of these cells as both layers (ZnTe and CZTS) have eco-friendly and earth-abundant constituents. The sol-gel spin coating method is used for the deposition of CZTS thin films on the corning glass substrates. The X-ray diffraction studies showed the peaks corresponding to (112), (200), (220), and (312) planes which confirmed the formation of the essential kesterite phase. The optical band gap of the deposited films was found at around 1.45 eV by the UV-visible-NIR spectrophotometer. The optimum thickness of the absorber layer (CZTS) and buffer layer (ZnTe) was investigated based on the performance of the ZnO:Al/ZnO/ZnTe/CZTS/Mo cell structure by using the AMPS-1D simulation tool. In contrast, the tool was molded by the experimentally investigated data for the constituent materials of the cell structure. The solar cells' efficiency was increased by 23.47% at 2500 nm and 50 nm thickness of the CZTS and ZnTe layers, respectively. In addition, it was analyzed and found that the current density value showed an improvement with operating temperature as it is one of the requirements in the high solar radiation areas where the temperature even rises more than 50 °C in the summer.

Nanoencapsulated plant-based antifungal formulation against the Aspergillus flavus and aflatoxin B1 contamination: Unraveling the biochemical and molecular mechanism of action.

Aflatoxin B1 (AFB1) is one of the most toxic fungal secondary metabolites associated with Aspergillus flavus contaminated food products. Although a range of synthetic chemicals has been used to control molds contamination, most of them possess a risk to the health and environment. The study reports the efficacy of nanoencapsulated plant-based synergistic antifungal formulation (Ne-CGT) as a green chemical agent against Aspergillus flavus and AFB1 contamination. The antifungal formulation (CGT) was prepared using the mathematical model based on different proportions of plant compounds (citral (C), geraniol (G), and terpineol (T)) and encapsulated inside the chitosan. Ne-CGT exhibited enhanced antifungal and AFB1 activity (0.15 µl/ml) compared to its free form CGT (0.3 µl/ml). Toxicity mechanism was related with impairment in functioning in the cell membrane (ergosterol and ion leakage), biochemical perturbance (mitochondrial membrane potential, enzyme activity Superoxide dismutase (SOD), Catalase (CAT), Glutathione reductase (GR), and carbon source metabolism), and functioning of aflatoxin biosynthesis gene Ver-1 and Nor-1. In addition, Ne-CGT effectively preserves the nutrition properties (lipid peroxidation, total carbohydrate, and crude protein) of Sorghum bicolor seed. The quantitative structure-activity relationship (QSAR) approach revealed the favorable safety profile and ecological acceptability of Ne-CGT. Hence, the study recommends its application as a plant-based antifungal agent to manage the growth of fungal and AFB1 contamination in agricultural food products.

Optimal Drug Regimen and Combined Drug Therapy and Its Efficacy in the Treatment of COVID-19: A Within-Host Modeling Study.

The COVID-19 pandemic has resulted in more than 524 million cases and 6 million deaths worldwide. Various drug interventions targeting multiple stages of COVID-19 pathogenesis can significantly reduce infection-related mortality. The current within-host mathematical modeling study addresses the optimal drug regimen and efficacy of combination therapies in the treatment of COVID-19. The drugs/interventions considered include Arbidol, Remdesivir, Interferon (INF) and Lopinavir/Ritonavir. It is concluded that these drugs, when administered singly or in combination, reduce the number of infected cells and viral load. Four scenarios dealing with the administration of a single drug, two drugs, three drugs and all four are discussed. In all these scenarios, the optimal drug regimen is proposed based on two methods. In the first method, these medical interventions are modeled as control interventions and a corresponding objective function and optimal control problem are formulated. In this framework, the optimal drug regimen is derived. Later, using the comparative effectiveness method, the optimal drug regimen is derived based on the basic reproduction number and viral load. The average number of infected cells and viral load decreased the most when all four drugs were used together. On the other hand, the average number of susceptible cells decreased the most when Arbidol was administered alone. The basic reproduction number and viral load decreased the most when all four interventions were used together, confirming the previously obtained finding of the optimal control problem. The results of this study can help physicians make decisions about the treatment of the life-threatening COVID-19 infection.

Mechanistic investigations on antifungal and antiaflatoxigenic activities of chemically characterised Carum carvi L. essential oil against fungal infestation and aflatoxin contamination of herbal raw materials.

This study aimed to investigate the efficiency of chemically characterised Carum carvi essential oil (CcEO) against aflatoxin B1 (AFB1) producing strain of Aspergillus flavus (AF-LHP-WS-4) causing deterioration of herbal raw materials (HRM). GC-MS analysis of the EO revealed the presence of carvone (69.85%) as a dominant component. CcEO caused complete suppression of A. flavus growth and AFB1 secretion at 0.7 and 0.6 µL/mL, respectively. The investigation on antifungal mode of action showed that CcEO inhibited fungal growth via abrogating ergosterol biosynthesis and triggered efflux of vital cellular ions. The inhibition of AFB1 biosynthesis was attributed to the inhibition of cellular methylglyoxal (MG) biosynthesis. In addition, CcEO showed remarkable antioxidant activity (IC50 = 10.564 µL/mL) against DPPH (2,2-diphenyl-1-picrylhydrazyl) radicals. Based on overall results, it can be concluded that the CcEO may be recommended as potential antifungal agent for protection of HRM from fungal infestation and AFB1 contamination.

Assessing the efficacy of chitosan nanomatrix incorporated with Cymbopogon citratus (DC.) Stapf essential oil against the food-borne molds and aflatoxin B1 production in food system.

The chitosan nanomatrix incorporated with Cymbopogon citratus essential oil (Ne-CcEO) possess enhanced efficacy against the food-borne molds and aflatoxin B1 production compared to free essential oil. The CcEO was encapsulated inside the chitosan nanomatrix with an average size 147.41 ± 16.18 nm and characterized by Scanning electron microscopy, Fourier transforms infrared spectroscopy, and X-ray diffraction assay. The encapsulation efficiency and loading capacity were ranged between (41.68-76.78%) and (5.3-8.80%). The biochemical and in-silico analysis results revealed the interference in functioning of membrane integrity, mitochondrial membrane potential, antioxidant defense, carbon source metabolism, methylglyoxal, and laeA gene in response to treatment of Ne-CcEO (0.5 µl/ml). In addition, Ne-CcEO significantly protects the deterioration of Pennisetum glaucum (L.) R. Br. seed samples by A. flavus, aflatoxin B1 contamination, and lipid peroxidation. The Ne-CcEO could be considered as promising antifungal additives for the control of food-borne molds and aflatoxin B1 contamination in the food system.

Miniatured Fluidics-Mediated Modular Self-Assembly of Anticancer Drug-Amino Acid Composite Microbowls for Combined Chemo-Photodynamic Therapy in Glioma.

A particulate carrier with the ability to load a combination of therapeutic molecules acting via diverse modes to initiate cancer cell ablation would help heighten anticancer therapeutic outcomes and mitigate harmful side effects due to high doses of mono drug therapy. Moving a step closer, herein, we have developed doxorubicin-curcumin-amino acid-based composite microbowls (CMBs) following miniaturized fluid flow-based self-assembly. The CMBs were further exploited as dual chemo-photodynamic therapeutic agents in C6 glioma cells cultured in both two-dimensional (2D) monolayer and as three-dimensional (3D) spheroids. These CMBs showed synergistic and visible (blue)-light-sensitive cell-killing effects in both C6 cells and 3D spheroids. Furthermore, these bowl-shaped structures also demonstrated good stability and excellent in vitro cytocompatibility in C6 glioma cells. Our results indicated that CMBs with asymmetric cavities could potentially be used as a combinatorial drug carrier enabling simultaneous chemo- and phototherapy for effective cancer treatment. The use of blue light, from the visible part of the electromagnetic system, to generate the phototherapeutic effect further advocates for the ease and widespread applicability of the systems.

Fluidic Oscillators, Feedback Channel Effect under Compressible Flow Conditions.

Fluidic oscillators are often used to modify the forces fluid generates on any given bluff body; they can also be used as flow, pressure or acoustic sensors, with each application requiring a particular oscillator configuration. Regarding the fluidic oscillators' main performance, a problem which is not yet clarified is the understanding of the feedback channel effect on the oscillator outlet mass flow frequency and amplitude, especially under compressible flow conditions. In order to bring light to this point, a set of three-dimensional Direct Numerical Simulations under compressible flow conditions are introduced in the present paper; four different feedback channel lengths and two inlet Reynolds numbers Re = 12,410 and Re = 18,617 are considered. From the results obtained, it is observed that as the inlet velocity increases, the fluidic oscillator outlet mass flow frequency and amplitude increase. An increase of the feedback channel length decreases the outlet mass flow oscillating frequency. At large feedback channel lengths, the former main oscillation tends to disappear, the jet inside the mixing chamber simply fluctuates at high frequencies. Once the Feedback Channel (FC) length exceeds a certain threshold, the oscillation stops. Under all conditions studied, pressure waves are observed to be traveling along the feedback channels, their origin and interaction with the jet entering the mixing chamber are thoroughly evaluated. The paper proves that jet oscillations are pressure-driven.

Pesticidal efficacy, mode of action and safety limits profile of essential oils based nanoformulation against Callosobruchus chinensis and Aspergillus flavus.

The study explores the pesticidal efficacy, mode of action, and safety limit profile of essential oils-based formulation using the combination of Myristica fragrans (M), Bunium persicum (B), and Zanthoxylum alatum (Z) (1:1:1 v/v/v) and their nanoformulation (Ne-MBZ) against the Callosobruchus chinensis, Aspergillus flavus and aflatoxin B1 production. Linalool, γ-terpinene, and cuminaldehyde were identified as the major compounds of the formulation (MBZ) by Gas chromatography-mass spectrometry (GC-MS). Nanoencapsulation of developed formulation (Ne-MBZ) was prepared using chitosan and characterized by scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and Fourier transform infrared spectroscopy (FTIR). The pesticidal efficacy of nanoformulation (Ne-MBZ) against C. chinensis IC50 (0.14 µl/ml), A. flavus (0.8 µl/ml) and AFB1 (0.8 µl/ml) was significantly higher in both in-vitro and in-situ conditions than the sum of their individual revealing a notable synergistic effect. Besides, the detailed mode of pesticidal action and safety limit profile were explored using biochemical, in-silico and ADMET (absorption, distribution, metabolism, excretion, and toxicity) approaches.

Untangling the multi-regime molecular mechanism of verbenol-chemotype Zingiber officinale essential oil against Aspergillus flavus and aflatoxin B1.

Aflatoxin B1 (AFB1), the natural polyketide produced by Aspergillus flavus, has a potent carcinogenic effect on humans as well as animals. In the present study, the antifungal and anti-aflatoxigenic B1 activity of chemically characterized Zingiber officinale essential oil (ZOEO) was investigated via in vitro analysis aided with molecular dynamics (MD) approaches. The GC-MS results revealed verbenol (52.41%) as the major component of oil. The antifungal and anti-aflatoxigenic activity of ZOEO was found to be 0.6 µl/ml and 0.5 µl/ml respectively. In-vitro analysis targeting the cell membrane, mitochondria and carbohydrate catabolism elucidated the probable antifungal mode of action. Further, docking and MD simulation results confirmed the inhibitory action of verbenol on the structural gene products (Nor-1, Omt-1, and Vbs) of aflatoxin biosynthetic machinery. Biochemical assays revealed the fungitoxic potential of the ZOEO while, computational results infers the stabilizing effects on the gene products upon verbenol binding leads to the impairment in its functionality. This is the first attempt to assess the multi-regime anti-AFB1 mechanism of verbenol chemotype-ZOEO targeting the Nor-1, Omt-1, and Vbs via computational approaches.

Continuous flow fabrication of Fmoc-cysteine based nanobowl infused core-shell like microstructures for pH switchable on-demand anti-cancer drug delivery.

Asymmetric nanostructures such as nanobowls (NBs) can exhibit superior drug delivery performances owing to their concave structure and interior asymmetric cavities. Here, we present a facile one-step method for the fabrication of NB like structures from a mere single amino acid mimetic, N-(9-fluorenylmethoxycarbonyl)-S-triphenylmethyl-l-cysteine following continuous-flow microfluidics enabled supramolecular self-assembly. Following fabrication, NBs were further infused into a vesicular shell consisting of the amino acid N-(tert-butoxycarbonyl)-S-triphenylmethyl-l-cysteine, carrying dual acid labile groups, the triphenylmethyl and the tert-butyloxycarbonyl groups. The NB infused core-shell like microstructures formed after the shell coating will now be addressed as NB-shells. Presence of pH-responsive shells bestowed the core-shell NB like structures with the ability to actively tune their surface pore opening and closing in response to environmental pH switch. To illustrate the potential use of the NB-shells in the field of anticancer drug delivery, the particles were loaded with doxorubicin (Dox) with an encapsulation efficiency of 42% and Dox loaded NB-shells exhibited enhanced efficacy in C6 glioma cells. Additionally, when tested in an animal model of glioblastoma, the nanoformulations demonstrated significantly higher retardation of tumour growth as compared to free Dox. Thus, this work strives to provide a new research area in the development of well turned-out and neatly fabricated pH switchable on/off anti-cancer drug delivery systems with significant translational potential.

Elucidation of antifungal and aflatoxin B1 inhibitory mode of action of Eugenia caryophyllata L. essential oil loaded chitosan nanomatrix against Aspergillus flavus.

The present study investigated the novel antifungal, and anti-aflatoxin B1 mechanism of Eugenia caryophyllata L. essential oil (ECEO) loaded chitosan nanomatrix against the toxigenic strain of A. flavus (AFLV-DK-02). Phytochemical profiling of ECEO was done by GC-MS which revealed eugenol (73.6%) as the primary bioactive compound. ECEO was encapsulated inside the chitosan nanomatrix (ECEO-Np) and characterized using SEM, AFM, FTIR and XRD analysis. The ECEO-Np exhibited enhance antifungal (0.25 µL/mL) and anti-aflatoxin B1 inhibitory activity (0.15 µL/mL) than ECEO. Antifungal and antiaflatoxin B1 inhibitory activity was found to be related with impairment in the biological functioning of the plasma membrane (ergosterol synthesis, leakage of membrane ions, UV light (260, 280 nm) absorbing material, dead cell by propidium iodide assay, mitochondrial membrane potential (MMP), methylglyoxal and inhibition in essential carbon substrate utilization). ECEO-Np exhibited remarkable free radical scavenging activity with IC50 value of 0.002 µL/mL. ECEO-Np effectively preserves the sensory characteristics of exposed maize crop seed up to six months of storage and shows considerable safety profile (non-toxic, non-mutagenic, non-hepatotoxic, non-carcinogenic, non-tumorigenic and biodegradable) using computational ADMET (absorption, distribution, metabolism, excretion, and toxicity) analysis.

Microflow synthesis and enhanced photocatalytic dye degradation performance of antibacterial Bi2O3 nanoparticles.

Microreactors can play a crucial role in synthesis and rapid testing of various nanocatalyst to be used in addressing the issue of environmental contamination. We have reported the rapid fabrication of polydimethylsiloxane (PDMS) and poly(methyl methacrylate) (PMMA)-based microreactor for the flow synthesis and enhanced inline photocatalysis of bismuth oxide (Bi2O3) nanoparticles. A T-shaped microreactor with uniform circular cross-sectional channel having inner diameter of 450 µm was utilized for synthesizing Bi2O3 nanoparticles with narrow size distribution. Further, photocatalytic dye degradation efficiency for methyl orange (MO) was recorded by coating these Bi2O3 nanoparticles within the inner walls of PMMA-based serpentine microreactors under visible light. The enhanced dye degradation efficiency of as high as 96% within just 15 min of irradiation is reported. A comparative analysis has also been done for both conventional as well as the in-channel photocatalysis highlighting the advantages of microreactor based photocatalysis over the conventional method. Bi2O3 nanoparticles also showed excellent stability even after three cycles indicating reusability of coated microreactors in photocatalysis. The small concentration of as synthesized Bi2O3 nanoparticles also demonstrated high efficacy for the inhibition of Escherichia coli bacterial pathogens.