ABSTRACT
This work established a quantitative method to access the shear stability of aerobic granular sludge (AGS) and validated its feasibility by using the mature AGS from a pilot-scale (50 tons/day) membrane bioreactor (MBR) for treating real municipal wastewater. The results showed that the changing rate (ΔS) of the peak area (S) of granule size distribution (GSD) exhibited an exponential relationship (R2≥0.76) with the shear time (y=a-b·cx), which was a suitable indicative index to reflect the shear stability of different AGS samples. The limiting granule size (LGS) was defined and proposed to characterize the equilibrium size for AGS after being sheared for a period of time, whose value in terms of Dv50 showed high correlation (R2=0.92) with the parameter a. The free Ca2+ (28.44-34.21 mg/L) in the influent specifically interacted with polysaccharides (PS) in the granule's extracellular polymeric substance (EPS) as a nucleation site, thereby inducing the formation of Ca precipitation to enhance its Young's modulus, while Ca2+ primarily interacted with PS in soluble metabolic product (SMP) during the initial granulation process. Furthermore, the Young's modulus significantly affected the parameter a related to shear stability (R2=0.99). Since the parameter a was more closely related (R2=1.00) to ΔS than that of the parameter b or c, the excellent correlation (R2=0.99) between the parameter a and the wet density further verified the feasibility of this method.
Subject(s)
Bioreactors , Sewage , Waste Disposal, Fluid , Waste Disposal, Fluid/methods , Pilot Projects , Wastewater/chemistry , Membranes, Artificial , AerobiosisABSTRACT
Dental implants are becoming a necessary component of the dental profession. The first bone resorption at the implant surface has an impact on implant success. Bone alterations surrounding the implant are a significant factor in determining the implant's effectiveness. Reducing the loss of peri-implant crestal bone has been a constant goal. In dental implantology, several procedures are carried out to improve implant stability and the healing of the bone. The ability of photobiomodulation techniques or low-level laser therapy (LLLT) to speed up osseointegration by inducing cellular metabolism and stimulating tissue healing has made them popular. This case study details the implant loading in a patient treated with photobiomodulation to achieve implant stability and who has compromised bone type or D4.
ABSTRACT
Quantifying species interactions based on empirical observations is crucial for ecological studies. Advancements in nonlinear time-series analyses, particularly S-maps, are promising for high-dimensional and non-equilibrium ecosystems. S-maps sequentially perform a local linear model fitting to the time evolution of neighbouring points on the reconstructed attractor manifold, and the coefficients can approximate the Jacobian elements corresponding to interaction effects. However, despite that the advantages in nonlinear forecasting with noise-contaminated data, these methodologies have a limitation in the Jacobian estimation accuracy owing to non-equidistantly stretched local manifolds in the state space. Herein, we therefore introduced a local manifold distance (LMD) concept, a non-equidistant measure based on the multi-faceted state dependency. By integrating LMD with advanced computation techniques, we presented a robust and efficient analytical method, LMD-based regression (LMDr). To validate its advantages in prediction and Jacobian estimation, we analysed synthetic time series of model ecosystems with different noise levels and applied it to an experimental protozoan predator-prey system with established biological information. The robustness to noise was the highest for LMDr, which also showed a better correspondence to expected predator-prey interactions in the protozoan system. Thus, LMDr can be applied to study complex ecological networks under dynamic conditions.
ABSTRACT
Objective: To compare the macular area parameters and aqueous humor factors between myopia and emmetropia. Methods: Convenience sampling was used to select patients who visited the Changzhi Aier Eye Hospital's department of ophthalmology from December 2018 to December 2022 as the study participants. They were divided into three groups according to whether they were diagnosed as mild myopia myopic, highly myopic or not as follows: the mild myopia group (60 cases, 108 eyes), the high myopia group (46 cases, 78 eyes) and the healthy emmetropia group (40 cases, 65 eyes). The differences in the macular integrity (MI) assessment, optical coherence tomography and optical coherence tomography angiography parameters and aqueous humor factors were compared between the three groups. Results: AL in high myopia group was the highest, and that in emmetropia group was the lowest. The BCVA of mild myopia group was the highest. The RS in the high myopia group were significantly lowest in the three groups (26.42 ± 1.04 vs. 28.34 ± 0.76 vs. 31.92 ± 0.77) (F = 5.374, p = 0.013). The 63% BCEA, 95% BCEA and MI in the high myopia group were significantly highest (p < 0.05). The mean RPE thickness, mean CT and mean RT in the high myopia group were lowest (p < 0.05). The blood flow density were lowest in the superficial fovea, paracentral fovea and different subdivisions of the paracentral fovea in the high myopia group (p < 0.05). The VEGF concentration in the aqueous humor of the high myopia group was lowest (25.62 ± 17.43 vs. 32.45 ± 24.67 vs. 64.37 ± 21.14) (F = 9.237, p < 0.001). The MMP-2 concentration was highest (483 ± 201.48 vs. 410 ± 142.37 vs. 386 ± 154.34) (F = 5.542, p = 0.018). The VEGF concentration in the aqueous humor factor was negatively correlated with the AL in the myopia group (r = -0.438, p = 0.002), the MMP-2 concentration was positively correlated with the AL (r = 0.484, p = 0.010). Conclusion: Patients with high myopia showed decreased retinal light sensitivity, fixation stability, superficial blood flow density and retinal thickness compared with people with emmetropia. A decreased VEGF concentration and increased MMP-2 concentration in the aqueous humor factor have potential associations with the development of high myopia.
ABSTRACT
BAR502, a bile acid analogue, is active as dual FXR/GPBAR1 agonist and represents a promising lead for the treatment of cholestasis and NASH. In this paper we report the synthesis and the biological evaluation of a library of hybrid compounds prepared by combining, through high-yield condensation reaction, some fibrates with BAR502.The activity of the new conjugates was evaluated towards FXR, GPBAR1 and PPARα receptors, employing transactivation or cofactor recruitment assays. Compound 1 resulted as the most promising of the series and was subjected to further pharmacological investigation, together with stability evaluation and cell permeation assessment. We have proved by LCMS analysis that compound 1 is hydrolyzed in mice releasing clofibric acid and BAR505, the oxidized metabolite of BAR502, endowed with retained dual FXR/GPBAR1 activity.
ABSTRACT
The poor thermal stability of lactoferrin (LF) hinders its bioavailability and use in commercial food products. To preserve LF from thermal denaturation, complexation with other biopolymers has been studied. Here we present the complex formation conditions, structural stability, and functional protection of LF by α-lactalbumin (α-LA). The formation of the LF-α-LA complexes was dependent on pH, mass ratio, and ionic strength. Changing the formation conditions and cross-linking by transglutaminase impacted the turbidity, particle size, and zeta-potential of the resulting complexes. Electrophoresis, Fourier-transform infrared spectroscopy, and circular dichroism measurements suggest that the secondary structure of LF in the LF-α-LA complex was maintained after complexation and subsequent thermal treatments. At pH 7, the LF-α-LA complex protected LF from thermal aggregation and denaturation, and the LF retained its functional and structural properties, including antibacterial capacity of LF after thermal treatments. The improved thermal stability and functional properties of LF in the LF-α-LA complex are of interest to the food industry.
ABSTRACT
This study explored the relationship between the interfacial behavior of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex (LF-EGCG) and the stability of high internal phase Pickering emulsions (HIPPEs). The formation of covalent bond between lactoferrin and polyphenol was verified by the increase in molecular weight. In LF-EGCG group, the surface hydrophobicity, interfacial pressure, and adsorption rate were decreased, while the molecular flexibility, interfacial film viscoelasticity, and interfacial protein content were increased. Meanwhile, LF-EGCG HIPPE possessed reduced droplet size, increased ζ-potential and stability. Rheology showed the viscoelasticity, structural recovery and gel strength of LF-EGCG HIPPE were improved, giving HIPPE inks better 3D printing integrity and clarity. Moreover, the free fatty acids (FFA) release of LF-EGCG HIPPE (62.6%) was higher than that of the oil group (50.1%). Therefore, covalent treatment effectively improved the interfacial properties of protein particles and the stability of HIPPEs. The macroscopic properties of HIPPEs were positively regulated by the interfacial properties of protein particles. The result suggested that the stability of emulsions can be improved by regulating the interfacial properties of particles.
ABSTRACT
This study investigated the effects of the application of glycine (Gly) and Pediococcus pentosaceus R1(Pp), alone or in combination, on the physicochemical properties, oxidative stability, and taste quality of Harbin dry sausages. The results demonstrated that after nine days of fermentation, the Gly + Pp group exhibited significantly (P < 0.05) lower moisture content (19.04%), water activity (0.686), and pH (4.78) values, alongside notably (P < 0.05) higher lactic acid bacteria count (8.11 log CFU/g sausage) and redness value (17.2), compared to the other three groups (P < 0.05). In addition, the dry sausages in the Gly + Pp group exhibited the lowest peroxide value (0.34 meq/kg sausage), thiobarbituric acid reactive substances (0.46 MAD/kg sausage), and protein carbonyl content (1.26 nmol/kg protein) during fermentation, followed by the Gly group, Pp group, and control group. Electronic tongue (e-tongue) and sensory evaluations revealed that the combined treatment with P. pentosaceus R1 and Gly resulted in superior taste characteristics. Besides, partial least squares regression (PLSR) analysis illustrated that the taste qualities characterized using the e-tongue were accordant with the sensory evaluation consequences, and total free amino acids (FAAs) and organic acids contributed to the dry sausages' taste properties. In conclusion, the combined application of Gly and P. pentosaceus R1 enhanced the physicochemical properties, oxidative stability, and taste profile of Harbin dry sausages.
ABSTRACT
Regulating the electrical double layer (EDL) structure can enhance the cycling stability of Zn metal anodes, however, the effectiveness of this strategy is significantly limited by individual additives. Inspired by the high-entropy (HE) concept, we developed a multicomponent (MC) EDL structure composed of La3+, Cl-, and BBI anions by adding dibenzenesulfonimide (BBI) and LaCl3 additives into ZnSO4 electrolytes (BBI/LaCl3/ZnSO4). Specifically, La3+ ions accumulate within EDL to shield the net charges on the Zn surface, allowing more BBI anions and Cl- ions to enter this region. Consequently, this unique MC EDL enables Zn anodes to simultaneously achieve uniform electric field, robust SEI layer, and balanced reaction kinetics. Moreover, the synergistic parameter-a novel descriptor for quantifying collaborative improvement-was first proposed to demonstrates the synergistic effect between BBI and LaCl3 additives. Benefitting from these advantages, Zn metal anodes achieved a high reversibility of 99.5% at a depth of discharge (DoD) of 51.3%, and Zn|MnO2 pouch cells exhibited a stable cycle life of 100 cycles at a low N/P ratio of 2.9.
ABSTRACT
Nanostructured lead telluride PbTe is among the best-performing thermoelectric materials, for both p- and n-types, for intermediate temperature applications. However, the fabrication of power-generating modules based on nanostructured PbTe still faces challenges related to the stability of the materials, especially nanoprecipitates, and the bonding of electric contacts. In this study, in situ high-temperature transmission electron microscopy observation confirmed the stability of nanoprecipitates in p-type Pb0.973Na0.02Ge0.007Te up to at least â¼786 K. Then, a new architecture for a packaged module was developed for improving durability, preventing unwanted interaction between thermoelectric materials and electrodes, and for reducing thermal stress-induced crack formation. Finite element method simulations of thermal stresses and power generation characteristics were utilized to optimize the new module architecture. Legs of nanostructured p-type Pb0.973Na0.02Ge0.007Te (maximum zT â¼ 2.2 at 795 K) and nanostructured n-type Pb0.98Ga0.02Te (maximum zT â¼ 1.5 at 748 K) were stacked with flexible Fe-foil diffusion barrier layers and Ag-foil-interconnecting electrodes forming stable interfaces between electrodes and PbTe in the packaged module. For the bare module, a maximum conversion efficiency of â¼6.8% was obtained for a temperature difference of â¼480 K. Only â¼3% reduction in output power and efficiency was found after long-term operation of the bare module for â¼740 h (â¼31 days) at a hot-side temperature of â¼673 K, demonstrating good long-term stability.
ABSTRACT
The orally given, irreversible, third-generation inhibitor of the epidermal growth factor receptor (EGFR), known as Nazartinib (EGF816), is now undergoing investigation in Phase II clinical trials conducted by Novartis for Non-Small Cell Lung Cancer. The primary aim of the current research was to establish a rapid, specific, environmentally friendly, and highly versatile UPLC-MS/MS methodology for the determination of nazartinib (NZT) levels in human liver microsomes (HLMs). Subsequently, same approach was used to examine the metabolic stability of NZT. The UPLC-MS/MS method employed in HLMs was validated as stated in the bioanalytical method validation criteria outlined by the US- FDA. The evaluation of the metabolic stability of NZT and the identification of potentially structural alarms were performed using the StarDrop software package that includes the P450 and DEREK software. The calibration curve for NZT showed a linearity in the range from 1 to 3000 ng/mL. The inter-day accuracy and precision exhibited a range of values between -4.33 % and 4.43 %, whereas the intra-day accuracy and precision shown a range of values between -2.78 % and 7.10 %. The sensitivity of the developed approach was verified through the determination of a LLOQ of 0.39 ng/mL. The intrinsic clearance and in vitro half-life of NZT were assessed to be 46.48 mL/min/kg and 17.44 min, respectively. In our preceding inquiry, we have effectively discerned the bioactivation center, denoted by the carbon atom between the unsaturated conjugated system and aliphatic linear tertiary amine. In the context of computational software, making minor adjustments or substituting the dimethylamino-butenoyl moiety throughout the drug design process may increase the metabolic stability and safety properties of new synthesized derivatives. The efficiency of utilizing different in silico software approaches to conserve resources and reduce effort was proved by the outcomes attained from in vitro incubation experiments and the use of NZT in silico software.
ABSTRACT
This study utilizes cross-country data from 2002 to 2019 from 60 selected developing countries to explore the impact of competition and financial inclusion on financial stability. Employing the system GMM estimator, compelling evidence is revealed, highlighting a number of key findings. Firstly, it is observed that financial inclusion has a weakening effect on financial stability within developing countries. Conversely, competition among these nations demonstrates a significant capacity to bolster financial stability. Additionally, the study underscores the pivotal role of financial development, identifying it as a primary driver that enables financial inclusion to positively influence financial stability within developing nations. Furthermore, the introduction of the square term of financial inclusion yields noteworthy insights, revealing a nonlinear relationship. Specifically, the findings suggest that strategic investments in the financial inclusion of developing countries have the potential to enhance financial stability up to a certain threshold. Therefore, for emerging economies seeking to fortify their financial stability, prioritizing efforts to augment financial inclusion is imperative. Over the long term, such endeavors have the potential to yield tangible improvements in financial stability. In conclusion, the research offers valuable policy implications. These include recommendations aimed at fostering greater financial inclusion within developing economies as a means of bolstering overall financial stability. By heeding these suggestions and implementing targeted policies, policymakers can work towards cultivating a more resilient and robust financial landscape within their respective nations.
ABSTRACT
Introduction: This paper investigates the operational stability of lactate biosensors, crucial devices in various biomedical and biotechnological applications. We detail the construction of an amperometric transducer tailored for lactate measurement and outline the experimental setup used for empirical validation. Methods: The modeling framework incorporates Brown and Michaelis-Menten kinetics, integrating both distributed and discrete delays to capture the intricate dynamics of lactate sensing. To ascertain model parameters, we propose a nonlinear optimization method, leveraging initial approximations from the Brown model's delay values for the subsequent model with discrete delays. Results: Stability analysis forms a cornerstone of our investigation, centering on linearization around equilibrium states and scrutinizing the real parts of quasi-polynomials. Notably, our findings reveal that the discrete delay model manifests marginal stability, occupying a delicate balance between asymptotic stability and instability. We introduce criteria for verifying marginal stability based on characteristic quasi-polynomial roots, offering practical insights into system behavior. Discussion: Qalitative examination of the model elucidates the influence of delay on dynamic behavior. We observe a transition from stable focus to limit cycle and period-doubling phenomena with increasing delay values, as evidenced by phase plots and bifurcation diagrams employing Poincaré sections. Additionally, we identify limitations in model applicability, notably the loss of solution positivity with growing delays, underscoring the necessity for cautious interpretation when employing delayed exponential function formulations. This comprehensive study provides valuable insights into the design and operational characteristics of lactate biosensors, offering a robust framework for understanding and optimizing their performance in diverse settings.
ABSTRACT
Force platforms and motion capture are commonly used as feedback mechanisms in exergaming; nevertheless, their therapeutic effectiveness may vary. Therefore, the primary objective of this study was to evaluate the effectiveness of commercially available virtual reality (VR) exergaming systems on balance and functional mobility, with a supplementary analysis considering the administered dose of exergaming. The search was conducted in five databases. Commercially available exergaming platforms were classified into two categories: VR exergaming with a balance board (including Wii Balance Board) and motion capture (including Xbox Kinect). Two categories of control interventions (treatment as usual [TAU] and no treatment [NT]) were extracted. The meta-analysis was performed separately for static, dynamic, and proactive balance outcomes and for the aggregated results of all included outcomes with subgroup analysis of lower, moderate, and higher doses. In total, 28 studies with 1457 participants were included. Both exergaming systems were particularly effective in improving the single leg stance outcome. VR exergaming with motion capture was found to be more effective than TAU with a standardized mean difference (SMD) of 0.48 (P = 0.006) and NT (SMD = 0.86; P = 0.02). In conclusion, commercially available VR exergaming with a motion capture feedback mechanism has demonstrated effectiveness as an intervention for balance training when compared with NT. Specifically, high doses (above 134 minutes per week) appear to be more beneficial for healthy older adults. Moreover, the findings provide some weak evidence supporting the effectiveness of VR exergaming with a balance board for improving functional mobility, particularly when compared with NT.
ABSTRACT
BACKGROUND: To investigate the reliability of balance tests administered using a tele-assessment method in patients with multiple sclerosis (MS). METHODS: The participants were assessed both online and face-to-face. The assessments were performed synchronously by two physiotherapists. The first method to used to evaluate the participants was determined through randomization. The Berg Balance Scale (BBS), Dynamic Gait Index (DGI), and Timed Up and Go (TUG) were used in the evaluations. Three days were left between the assessment methods. Online platforms were used for tele-assessment. The agreement between and correlation of face-to-face and tele-assessments was analyzed by applying intra-class correlation coefficients (ICC), limits of agreement, and Pearson's correlation coefficient. RESULTS: This study included 39 individuals with MS with an EDSS score of 3.03 ± 1.41. Intra-rater reliability of the tele-assessment was excellent (ICCBBS = 0.96; ICCDGI = 0.97; ICCTUG = 0.97). Very high correlations were observed in all BBS, DGI, and TUG measurements between face-to-face and tele-assessment methods according to the first and second assessors (rBBS1 = 0.92; rBBS2 = 0.93; rDGI1 = 0.94; rDGI2 = 0.95; rTUG1 = 0.94; rTUG2 = 0.95, respectively). The inter-rater reliability of tele-assessments (ICCBBS = 0.97; ICCDGI = 0.97; ICCTUG = 1.00) achieved excellent reliability. CONCLUSION: BBS, DGI, and TUG are reliable and agreed tests that can be used with tele-assessments, offering similar data to face-to-face methods.
ABSTRACT
HYPOTHESIS: Polyglycerol esters of fatty acids are generated via the esterification of a polydisperse mixture of polyglycerol with naturally derived fatty acids. The polymerization process of polyglycerol results in the production of various oligomers, ranging from di-, tri-, and higher-order forms, which contribute to the complexity of final products. The combination of complementary experimental techniques and adequate theoretical interpretations can reveal the wide variety of their physicochemical properties. EXPERIMENTS: The colloid and interface properties of polyglyceryl mono-laurate, mono-stearate, mono-oleate, and a mixture of mono-caprylate and mono-caprate esters solutions were characterized by measurements of the electrolytic conductivity, static and dynamic surface tension, aggregate and micelle sizes and distributions, thin liquid film stability and stratification, and solubility in aqueous and in oil phases. The formation, stability, and bubble size distribution of foams generated from polyglycerol esters aqueous solutions were systematically investigated. FINDINGS: The low concentrations of double-tail molecules and fatty acids in polyglycerol esters affect considerably their micellar, aggregation, and vesicle formations in aqueous solutions. The theoretical data interpretation of polyglycerol esters isotherms and thin liquid films data provide information on the adsorption energies, excluded areas per molecule, interaction parameters of molecules at interfaces, surface electrostatic potential, and the size of micelles. Polyglyceryl mono-oleate exhibits spontaneous emulsification properties. Short chain length polyglycerol esters have excellent foaming ability but relatively low foam stability. The optimal weight fractions of the short-chain polyglyceryl esters and polyglyceryl mono-stearate mixtures with respect to good foaminess and foam stability upon Ostwald ripening are obtained. The reported physicochemical characterization of the water-soluble polyglycerol esters could be of interest to increase the range of their applicability in practice.
ABSTRACT
HYPOTHESIS: Nanoparticle-stabilized foams are extremely stable, and flame retardant inorganic nanoparticles should be able to add sealing capacity of firefighting foams on flammable liquid fuels, and hence enhance fire extinguishment performance on liquid fuel fire. In practice, how do flame retardant nanoparticles resist the destructive effect of oil molecules on foam and tune foam properties? EXPERIMENTS: We have prepared a nanoparticle-enhanced foam comprising of hydrocarbon surfactant, short-chain fluorocarbon surfactant, and nanoparticles. The interactions among nanoparticles and surfactant molecules were characterized by using dynamic surface tension and conductivity. Stability, rheology, and oil resistivity on liquid fuel of the nanoparticle-enhanced foam were evaluated systematically. Fire suppression effectiveness of the foams was verified based on a standard experiment. FINDINGS: Foam stability and oil resistivity were enhanced due to self-assembled network structures formed by jammed aggregates composed by nanoparticles and surfactants in Plateau borders and bubble films, providing structural recoverability and enhanced viscoelasticity within foam. Foams containing nano-SiO2, nano-CaCO3, nano-Al(OH)3, and nano-Mg(OH)2 show difference in fire extinguishment due to different ability to enhance foam properties. Foam containing nano-Al(OH)3 shows the strongest adaptation and could shorten fire extinguishing time by 2 times and prolong burn-back time by 2.3 times compared with commercial product.
ABSTRACT
To improve the stability of pollock bone broth, compound emulsifiers were employed and evaluated in nano-emulsions from pollock bones (PBNs). The microstructure, creaming index, particle size, zeta potential, and viscosity of PBNs were characterized and the stability of PBNs was investigated. It revealed that the concentration of compound emulsifiers is one of the principal factors for particle size, zeta potential, and viscosity of PBNs, and 0.9% of sodium caseinate and sucrose fatty acid ester (CS-SE) can make the PBN display good stability. Its particle size changed from 81.17 ± 1.33 nm to 19.62 ± 0.21 nm when the temperature ranged from 40 °C to 80 °C, and its creaming index could reach a maximum (90.83%) among all PBNs in 4 months of freeze-thaw assays. PBN stability could be improved by the compound emulsifier (CS-SE), which offers a theoretical basis for the application of pollock bone broth.
ABSTRACT
PURPOSE: To evaluate the repeatability and agreement in dry eye measurements using Oculus Keratograph 5M (K5M) and SBM Sistemi IDRA (IDRA). METHODS: A total of 108 participants were enrolled and 108 eyes were evaluated. Tear meniscus height (TMH) and first and average non-invasive break-up time (NIBUT) were measured using the K5M and IDRA (order randomly assigned). TMH was measured using the built-in caliper tool while NIBUT was computed by the automatic algorithm of the instruments. RESULTS: The Bland Altman plots analysis showed a good agreement between the two instruments for TMH (95 % Limits of Agreement (LoA), -0.17 to 0.16), but not the first NIBUT (95 % LoA, -8.13 to 14.79) and average NIBUT (95 % LoA, -7.89 to 10.32). The values of the first and average NIBUT measured using IDRA were significantly shorter than in K5M (difference = median (IQR) -2.75 (-6.48- -0.28)s, p < 0.001 and difference = median (IQR) -1.65 (-3.97-1.89)s, p = 0.008 respectively). The TMH (p = 0.037) and NIBUT average (p = 0.033) measured by K5M, as well as the TMH (p = 0.040) measured by IDRA, exhibited unstable measurements across the three measurement times. The remaining parameters exhibited stability with three repeated measurements. CONCLUSION: The NIBUT measurements are not interchangeable between IDRA and K5M, while the TMH was little difference between the two instruments. It is important to exercise caution when using different ocular surface analyzers to minimize errors in comparing multiple measurements.
ABSTRACT
Photoelectrochemical (PEC) water splitting is attracting significant research interest in addressing sustainable development goals in renewable energy. Current state-of-the-art, however, cannot provide photoanodes with simultaneously high efficiency and long-lasting lifetime. Here, large-scale NiFe oxyhydroxides-alloy hybridized co-catalyst layer that exhibits an applied bias photon-to-current efficiency (ABPE) of 4.24% in buried homojunction-free photoanodes and stability over 250 h is reported. These performances represent an increase over the present highest-performing technology by 408% in stability and the most stable competitor by over 330% in efficiency. These results originate from a previously unexplored mechanism of light-induced atomic reconfiguration, which rapidly self-generates a catalytic-protective amorphous/crystalline heterostructure at low biases. This mechanism provides active sites for reaction and insulates the photoanode from performance degradation. Photon-generated NiFe oxyhydroxides are more than 200% higher than the quantity that pure electrocatalysis would otherwise induce, overcoming the threshold for an efficient water oxidation reaction in the device. While of immediate interest in the industry of water splitting, the light-induced NiFe oxyhydroxides-alloy co-catalyst developed in this work provides a general strategy to enhance further the performances and stability of PEC devices for a vast panorama of chemical reactions, ranging from biomass valorization to organic waste degradation, and CO2-to-fuel conversion.