A practical approach for the determination of environmental quality standards-based discharge limits: the case of Tersakan sub-basin of Yesilirmak River in Turkey.

The control of point source discharges to rivers has become more significant since the establishment of environmental quality standards (EQSs). Many countries, including Turkey, have set EQS values for various contaminants. One important challenge regarding these EQSs is to reconcile the effluent limits that are technically and economically achievable with the ones that are required to accomplish the EQSs. The Tersakan sub-basin of Yesilirmak River acquires good examples of this challenge due to the industrial and agricultural discharge activities present. In this study, a new, simplistic, and less data-driven approach is developed to facilitate this compromise and implemented for all suitable discharge points within the sub-basin. The foundation of this approach is that effluent discharges may mix and become diluted within negligibly short distances from the point of discharge where exceedance of EQSs can be permissible. The approach modularly combines different analytical solutions of the advective-dispersive mass transport equation that are applicable under different mixing conditions and estimates maximum allowable discharge concentrations of contaminants. The results of the case study in the Tersakan sub-basinindicate that none of the studied discharges need load reduction to achieve EQSs. However, in various points, tridecane, nickel, bis(2-ethylhexyl) terephthalate, NH4-N, total phosphorus, and free cyanide have consumed more than 10% of their discharge quotas estimated by the mentioned approach. Therefore, for the sub-basin, these six contaminants and their corresponding two discharge points may require more attention in the future.

Identification of management strategies and generation factors for spent lead acid battery recovery plant wastes in Turkey.

The recovery of spent or waste lead acid batteries is important both for the management of lead input to the environment and to meet the lead demand of the market in a more energy and cost effective manner than primary production. As an important producer of lead acid batteries for the Middle Eastern and Eastern European market, Turkey seems to meet 22%-52% of its total lead demand by waste lead acid battery recovery. In this study, the wastes from Turkish waste lead acid battery recovery plants are identified and management strategies that are both technically sufficient and economically feasible for each of these wastes are complied. Furthermore, ranges of the amount of each waste generated per mass of final lead produced in these plants are estimated. Some of the most significantly generated wastes are lead containing dusts, wash water treatment sludges and slags from smelting furnaces with generation rates between 5-250, 1-150 and 5-100 kg t-1 of product lead, respectively. Many of these can be fed back to the recovery process inside the plants except a subset of slags that are called 'final slag' and have low (5%-6%) lead content. Final slags can either be recovered for the production of cement, road-filling materials or abrasives proven that they are in a non-leachable, stable state or should be stored at hazardous waste landfills. For improved environmental performance, newly emerging techniques that eliminate the generation of such slags are also discussed and suggested.