A spectrofluorimetric method for the determination of pindolol in natural waters using various organic and cyclodextrin media.

A simple, sensitive, and rapid spectrofluorimetric method was developed for the determination of the ß-blocker pindolol. The native fluorescence of pindolol was measured in different organic solvents and in cyclodextrin aqueous media. The highest fluorescence signal was obtained in 2-propanol at λem = 303 nm with λex = 260 nm. Analytical figures of merit for the spectrofluorimetric determination of pindolol were satisfactory, with wide linear dynamic range (LDR) values of two orders of magnitude, and rather low limit of detection (LOD) values between 0.2 and 8.7 ng/mL. Moreover, the addition of cyclodextrins (HP-ß-CD and ß-CD) in aqueous media enhanced the fluorescence of pindolol. In addition, the inclusion complexes of pindolol with cyclodextrins were investigated and the stability constants of complexes were calculated by means of the method of nonlinear regression (NLR). The method was successfully applied to the analysis of tap water and natural water samples, spiked with pindolol.

Toxic heavy metals: impact on the environment and human health, and treatment with conducting organic polymers, a review.

Water pollution by heavy metals has many human origins, such as the burning of fossil fuels, exhaust gases of vehicles, mining, agriculture, and incineration of solid and liquid wastes. Heavy metals also occur naturally, due to volcanoes, thermal springs activity, erosion, infiltration, etc. This water contamination is a threat for living beings because most heavy metals are toxic to humans and to aquatic life. Hence, it is important to find effective techniques for removing these contaminants in order to reduce the level of pollution of the natural waters. In this work, we have reviewed the toxicity of several heavy metals (mercury, lead, cadmium, chromium, nickel), their impact on the environment and human health, and the synthesis and characterization methods of conducting organic polymers (COPs) utilized for the removal of heavy metals from the environment. Therefore, this review was essentially aimed to present recent works and methods (2000-2020) on the environmental impact and toxicity of heavy metals and on the removal of toxic heavy metals, using chemically and/or electrochemically synthesized COPs. We have also stressed the great interest of COPs for the removal of toxic heavy metals from waters.

Polypyrrole-Wrapped Carbon Nanotube Composite Films Coated on Diazonium-Modified Flexible ITO Sheets for the Electroanalysis of Heavy Metal Ions.

Highly sensitive multicomponent materials designed for the recognition of hazardous compounds request control over interfacial chemistry. The latter is a key parameter in the construction of the sensing (macro) molecular architectures. In this work, multi-walled carbon nanotubes (CNTs) were deposited on diazonium-modified, flexible indium tin oxide (ITO) electrodes prior to the electropolymerization of pyrrole. This three-step process, including diazonium electroreduction, the deposition of CNTs and electropolymerization, provided adhesively-bonded, polypyrrole-wrapped CNT composite coatings on aminophenyl-modified flexible ITO sheets. The aminophenyl (AP) groups were attached to ITO by electroreduction of the in-situ generated aminobenzenediazonium compound in aqueous, acidic medium. For the first time, polypyrrole (PPy) was electrodeposited in the presence of both benzenesulfonic acid (dopant) and ethylene glycol-bis(2-aminoethylether)-tetraacetic acid (EGTA), which acts as a chelator. The flexible electrodes were characterized by XPS, Raman and scanning electron microscopy (SEM), which provided strong supporting evidence for the wrapping of CNTs by the electrodeposited PPy. Indeed, the CNT average diameter increased from 18 ± 2.6 nm to 27 ± 4.8, 35.6 ± 5.9 and 175 ± 20.1 after 1, 5 and 10 of electropolymerization of pyrrole, respectively. The PPy/CNT/NH2-ITO films generated by this strategy exhibit significantly improved stability and higher conductivity compared to a similar PPy coating without any embedded CNTs, as assessed by from electrochemical impedance spectroscopy measurements. The potentiometric response was linear in the 10-8-3 × 10-7 mol L-1 Pb(II) concentration range, and the detection limit was 2.9 × 10-9 mol L-1 at S/N = 3. The EGTA was found to drastically improve selectivity for Pb(II) over Cu(II). To account for this improvement, the density functional theory (DFT) was employed to calculate the EGTA-metal ion interaction energy, which was found to be -374.6 and -116.4 kJ/mol for Pb(II) and Cu(II), respectively, considering solvation effects. This work demonstrates the power of a subtle combination of diazonium coupling agent, CNTs, chelators and conductive polymers to design high-performance electrochemical sensors for environmental applications.

Establishment of an EC50 database of pesticides using a Vibrio fischeri bioluminescence method.

An EC50 database was established to assess the acute toxicity of 16 PESTANAL pesticide standards and of seven pesticide commercial formulations using a Vibrio fischeri bioluminescence method. Half maximal effective concentration (EC50 ) is defined as the concentration of pollutant (in this case, pesticide) destroying 50% of the bacteria population and causing 50% bioluminescence inhibition, after a specified exposure time. Linear curves of bioluminescence inhibition versus pesticide concentration and EC50 values were obtained for exposure times (t) of 5 or 15 min for these pesticides. The EC50 values ranged from 6.90 × 10-4 to 0.83 mg/ml (t = 5 min), and from 9.00 × 10-4 to 0.37 mg/ml (t = 15 min) for pesticide standards, plus from 0.0077 to 0.74 mg/ml (t = 5 min), and from 0.0076 and 0.57 mg/ml (t = 15 min) for pesticide commercial formulations. The EC50 database allowed classification of the pesticides under study into three categories according to their toxicity: very toxic, toxic and moderately toxic. These results demonstrated that the establishment of an EC50 database and of linear curves of bioluminescence inhibition versus the pesticide concentration resulted in very important and irreplaceable tools to estimate the global and individual toxicity of pesticides present in environmental samples.

A novel fluorescent sensor based on electrosynthesized benzene sulfonic acid-doped polypyrrole for determination of Pb(II) and Cu(II).

To develop conducting organic polymers (COPs) as luminescent sensors for determination of toxic heavy metals, a new benzene sulfonic acid-doped polypyrrole (PPy-BSA) thin film was electrochemically prepared by cyclic voltammetry (CV) on flexible indium tin oxide (ITO) electrode in aqueous solution. PPy-BSA film was characterized by FTIR spectrometry, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The optical properties of PPy-BSA were investigated by ultraviolet (UV)-visible absorption and fluorescence spectrometry in dimethylsulfoxide (DMSO) diluted solutions. PPy-BSA fluorescence spectra were strongly quenched upon increasing copper(II) ion (Cu2+ ) and lead(II) ion (Pb2+ ) concentrations in aqueous medium, and linear Stern-Volmer relationships were obtained, which indicated the existence of a main dynamic fluorescence quenching mechanism. BSA-PPy sensor showed a high sensitivity for detection of both metallic ions, Cu2+ and Pb2+ , with very low limit of detection values of 3.1 and 18.0 nM, respectively. The proposed quenching-fluorimetric sensor might be applied to the determination of traces of toxic heavy metallic ions in water samples.

Combination of photoinduced fluorescence and GC-MS for elucidating the photodegradation mechanisms of diflubenzuron and fenuron pesticides.

Diflubenzuron (DFB) and fenuron (FEN) are benzoylurea and phenylurea pesticides, widely used in Senegal, that do not exhibit any natural fluorescence, but can be determined by means of photoinduced fluorescence (PIF) methods. Photodegradation of DFB and FEN yielded a number of fluorescent and non-fluorescent photoproducts. For both pesticides, at least 10 photoproducts were detected and identified by gas chromatography-mass spectrometry (GC/MS). To identify the formed fluorescent DFB and FEN photoproducts, their fluorescence spectra were compared with those of standard compounds, including phenol and p-hydroxyaniline.

Tracking metal ions with polypyrrole thin films adhesively bonded to diazonium-modified flexible ITO electrodes.

Adhesively bonded polypyrrole thin films doped with benzene sulfonic acid (BSA) were electrodeposited on aminobenzenediazonium-modified flexible ITO electrodes and further employed for the detection of Pb2+, Cu2+, and Cd2+ metal ions in aqueous medium. The aminophenyl (AP) adhesive layer was grafted to ITO by electroreduction of the in situ generated parent diazonium compound. Polypyrrole (PPy) thin films exhibited remarkable adhesion to aminophenyl (ITO-AP). The strongly adherent polypyrrole films exhibited excellent electroactivity in the doped state with BSA which itself served to chelate the metal ions in aqueous medium. The surface of the resulting, modified flexible electrode was characterized by XPS, SEM, and electrochemical methods. The ITO-AP-PPy electrodes were then used for the simultaneous detection of Cu2+, Cd2+, and Pb2+ by differential pulse voltammetry (DPV). The detection limits were 11.1, 8.95, and 0.99 nM for Cu2+, Cd2+, and Pb2+, respectively. In addition, the modified electrodes displayed a good reproducibility, making them suitable for the determination of heavy metals in real wastewater samples.

Removal of lead and cadmium from aqueous solutions by using 4-amino-3-hydroxynaphthalene sulfonic acid-doped polypyrrole films.

Water pollution by heavy metals is a great health concern worldwide. Lead and cadmium are among the most toxic heavy metals because they are dangerous for the human and aquatic lives. In this work, the removal of lead and cadmium from aqueous solutions has been studied using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid-doped polypyrrole (AHNSA-PPy) films as a new adsorbent. Two distinct methods, including the immersion method, based on the Pb2+ and Cd2+ spontaneous removal by impregnation of the polymer in the solution, and the electro-elimination method, consisting of removal of Pb2+ and Cd2+ ions from the solution by applying a small electrical current (5 mA) to the polymer film, were developed: the evolution of Pb2+ and Cd2+ concentrations with time was monitored by inductively coupled plasma optical emission spectrometry (ICP-OES). The effect of pH on the adsorption and electro-elimination of Pb2+ and Cd2+ using the AHNSA-PPy film was investigated and optimized, showing that the ionic adsorption and electro-elimination processes were highly pH-dependent. The kinetics of Pb2+ and Cd2+ adsorption and electro-elimination were found to follow second-order curves. The maximum adsorption capacity values of the AHNSA-PPy film were 64.0 and 50.4 mg/g, respectively, for Pb2+ and Cd2+. The removal efficiency values were, respectively, for Pb2+ and Cd2+, 80 and 63% by the immersion method, and 93 and 85% by the electro-elimination method. Application of both methods to Senegal natural waters, fortified with Pb2+ and Cd2+, led to removal efficiency values of, respectively for Pb2+ and Cd2+, 76-77 and 58-59% by the immersion method, and of 82-90 and 80-83%, by the electro-elimination method.

Development of online automatic detector of hydrocarbons and suspended organic matter by simultaneously acquisition of fluorescence and scattering.

Permanent online monitoring of water supply pollution by hydrocarbons is needed for various industrial plants, to serve as an alert when thresholds are exceeded. Fluorescence spectroscopy is a suitable technique for this purpose due to its sensitivity and moderate cost. However, fluorescence measurements can be disturbed by the presence of suspended organic matter, which induces beam scattering and absorption, leading to an underestimation of hydrocarbon content. To overcome this problem, we propose an original technique of fluorescence spectra correction, based on a measure of the excitation beam scattering caused by suspended organic matter on the left side of the Rayleigh scattering spectral line. This correction allowed us to obtain a statistically validated estimate of the naphthalene content (used as representative of the polyaromatic hydrocarbon contamination), regardless of the amount of suspended organic matter in the sample. Moreover, it thus becomes possible, based on this correction, to estimate the amount of suspended organic matter. By this approach, the online warning system remains operational even when suspended organic matter is present in the water supply.

Removal of Cr(VI) from aqueous solution using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid doped polypyrrole as adsorbent.

Polypyrrole (PPy) conducting films, doped with 4-amino-3-hydroxynaphthalene sulfonic acid (AHNSA), were electrosynthesized by anodic oxidation of pyrrole on Pt and steel electrodes in aqueous medium (0.01 M AHNSA +0.007 M NaOH, using cyclic voltammetry (CV), and their electrochemical properties were studied. Fourier-transform infrared (FT-IR) spectroscopy confirmed the formation of AHNSA-PPy films. Their morphology was characterized by scanning electron microscopy (SEM), and their optical properties, including UV-VIS absorption and fluorescence spectra, were also investigated. AHNSA-PPy films were used for the removal of chromium(VI) from aqueous solution, by means of the immersion method and the Cr(VI) electro-reduction method. The effect of various experimental parameters, including the adsorbent (polymer) mass, pH, type of electrodes, and current intensity, on the adsorption of chromium by the polymer was performed and optimized. The adsorption and electro-reduction of (Cr VI) on the AHNSA-PPy film surface were found to be highly pH-dependent, and the kinetics of Cr(VI) adsorption and electro-reduction followed second-order kinetic curves. Apparent second-order rate constants were about three times higher for the Cr(VI) electro-reduction method than for the immersion method, indicating that the use of electro-reduction method significantly accelerated the chromium adsorption process on polymer. The maximum adsorption capacity of the AHNSA-PPy film for chromium was 224 mg g-1. A 96% chromium removal from pure aqueous solution was reached within about 48 h by the immersion method, but only within about 6 h by the Cr(VI) electro-reduction method. Application of both methods to Cr(VI) fortified natural waters of Senegal led to chromium removal efficiency high values (93 to 96% according to the type of natural water).

Fluorescence Quenching of Two Coumarin-3-carboxylic Acids by Trivalent Lanthanide Ions.

The effects of various trivalent lanthanide ions (acetates of Ce3+, Er3+, Eu3+, Nd3+) on the electronic absorption and fluorescence spectra of un-substituted coumarin-3-carboxylic acid (CCA) and 7-N,N-diethylamino-coumarin-3-carboxylic acid (DECCA) have been investigated in dimethylsulfoxide (DMSO) at room temperature. Depending on the lanthanide ion nature and concentration, significant spectral changes of absorption bands occurred for both coumarin derivatives. These spectral changes were attributed to the formation of ground-state complexes between the coumarin carboxylate derivatives and lanthanide ions. The fluorescence quenching of CCA and DECCA upon increasing the lanthanide ion concentration was studied. Different quantitative treatments, including the Stern-Volmer equation, the Perrin equation and a polynomial equation, were applied and compared in order to determine the nature of the quenching mechanisms for both coumarin derivatives. The results suggested the contribution of both dynamic and static quenching. Significant differences of CCA and DECCA fluorescence quenching efficiency were also observed, depending on the lanthanide ion. DECCA fluorescence lifetime measurements, performed in the absence and in the presence of Ln3+, confirmed a contribution of static quenching.

Synthesis and spectral properties of new fluorescent alkoxy-substituted thieno[3,2-b]indole derivatives.

The synthesis and optical properties of three new fluorescent alkoxy-substituted thieno[3,2-b]indole (TI) derivatives, including 7-methoxy thieno[3,2-b]indole (7-MeOTI), 6,7- methylenedioxythieno[3,2-b]indole (6,7-MDTI) and 6,7-dihexyloxythieno[3,2-b]indole, (6,7-DHTI), were investigated. Electronic absorption spectra, fluorescence excitation and emission spectra, fluorescence quantum yields (ΦF), lifetimes (τF), and other photophysical parameters of the three TI derivatives were measured in DMSO solutions at room temperature. Theoretical electronic absorption and fluorescence spectra were also calculated by means of a molecular orbital (MO) method. For all three alkoxy-TI derivatives, the fluorescence emission maximum wavelength was significantly red shifted relative to un-substituted TI, which was attributed to delocalization of the fused hetero-aromatic ring π electronic system by the electron-donating alkoxy group(s). ΦF values varied from 0.12 to 0.19, according to the compound. τF were short, in the range 0.56-1.13 ns.

Degradation and mineralization of sulcotrione and mesotrione in aqueous medium by the electro-Fenton process: a kinetic study.

INTRODUCTION: The degradation and mineralization of two triketone (TRK) herbicides, including sulcotrione and mesotrione, by the electro-Fenton process (electro-Fenton using Pt anode (EF-Pt), electro-Fenton with BDD anode (EF-BDD) and anodic oxidation with BDD anode) were investigated in acidic aqueous medium. METHODS: The reactivity of both herbicides toward hydroxyl radicals was found to depend on the electron-withdrawing effect of the aromatic chlorine or nitro substituents. The degradation of sulcotrione and mesotrione obeyed apparent first-order reaction kinetics, and their absolute rate constants with hydroxyl radicals at pH 3.0 were determined by the competitive kinetics method. RESULTS AND DISCUSSION: The hydroxylation absolute rate constant (k(abs)) values of both TRK herbicides ranged from 8.20 × 10(8) (sulcotrione) to 1.01 × 10(9) (mesotrione) L mol(-1) s(-1), whereas those of the TRK main cyclic or aromatic by-products, namely cyclohexane 1,3-dione, (2-chloro-4-methylsulphonyl) benzoic acid and 4-(methylsulphonyl)-2-nitrobenzoic acid, comprised between 5.90 × 10(8) and 3.29 × 10(9) L mol(-1) s(-1). The efficiency of mineralization of aqueous solutions of both TRK herbicides was evaluated in terms of total organic carbon removal. Mineralization yields of about 97-98% were reached in optimal conditions for a 6-h electro-Fenton treatment time. CONCLUSIONS: The mineralization process steps involved the oxidative opening of the aromatic or cyclic TRK by-products, leading to the formation of short-chain carboxylic acids, and, then, of carbon dioxide and inorganic ions.

Fluorescence properties and dipole moments of novel fused thienobenzofurans. Solvent and structural effects.

The electronic absorption, fluorescence excitation and emission spectra, and fluorescence quantum yields of novel fused thienobenzofurans, including thieno[3,2-b][1]benzofuran (1), [1]benzothieno[3,2-b]furan (2), and [1]benzothieno[3,2-b][1]benzofuran (3), were recorded in fourteen solvents of different polarities at room temperature. Compound 2 was not fluorescent. Experimental ground-state dipole moments of compounds 1-3 were measured in benzene at 298 K and compared with the corresponding theoretical dipole moment values. The solvent effects on the electronic absorption and fluorescence spectra of these thienobenzofurans were quantitatively investigated by means of solvatochromic correlations based on the Kawski-Chamma-Viallet and McRae equations. A weak negative solvatochromic behavior was found for these compounds, showing that their dipole moments are slightly lower in the excited singlet-state than in the ground-state. Kamlet-Abboud-Taft multiparameter relationships were also established for electronic absorption and fluorescence wavenumbers, and fluorescence quantum yields in most solvents, demonstrating the occurrence of specific solute-solvent interactions.

Revisiting the photophysical properties and excited singlet-state dipole moments of several coumarin derivatives.

The solvent effects on the electronic absorption and fluorescence emission spectra of several coumarins derivatives, containing amino, N,N-dimethyl-amino, N,N-diethyl-amino, hydroxyl, methyl, carboxyl, or halogen substituents at the positions 7, 4, or 3, were investigated in eight solvents with various polarities. The first excited singlet-state dipole moments of these coumarins were determined by various solvatochromic methods, using the theoretical ground-state dipole moments which were calculated by the AM1 method. The first excited singlet-state dipole moment values were obtained by the Bakhshiev, Kawski-Chamma-Viallet, Lippert-Mataga, and Reichardt-Dimroth equations, and were compared to the ground-state dipole moments. In all cases, the dipole moments were found to be higher in the excited singlet-state than in the ground state because of the different electron densities in both states. The red-shifts of the absorption and fluorescence emission bands, observed for most compounds upon increasing the solvent polarity, indicated that the electronic transitions were of π-π* nature.

Analytical applications of photoinduced chemiluminescence in flow systems--a review.

In this review, the recent evolution and the state of the art of photochemical reactions coupled with chemiluminescence processes are presented. Different chemiluminescence systems have been considered together with suitable photochemical derivatization processes that can affect either the analyte of interest or even the chemiluminogenic reagent, producing some derivatives able to participate more efficiently in the CL reactions and enhancing the CL emission. The on-line integration of the photochemical reactions as well as the coupling of this resulting photoinduced chemiluminescence (PICL) method with dynamic analytical systems, such as flow injection analysis, liquid or gas chromatography and capillary electrophoresis, have been discussed. Important applications of PICL have been proposed in environmental, pharmaceutical and food analysis.

Synthesis, electrochemical, and optical properties of new fluorescent, substituted thieno[3,2-b][1]benzothiophenes.

The synthesis, electrochemical and optical properties of three fluorescent substituted thieno[3,2-b][1]benzothiophenes (TBT) derivatives, including 3-methoxythieno[3,2-b][1]benzothiophene (3-MeO-TBT), 2,3-dimethylthieno[3,2-b][1]benzothiophene (2,3-diMe-TBT), and 6-methoxythieno[3,2-b][1]benzothiophene-2-carboxylate (6-MeO-TBT-2-COOMe), were investigated. The oxidation potential values varied between 1.40 and 1.20 V/SCE according to the electronic substituent effect, and electropolymerization attempts, performed in 0.1 M LiClO(4) acetonitrile solution, led to the formation of very thin films of poly(3-MeO-TBT) and poly(2,3-di-Me-TBT). Electronic absorption spectra, fluorescence excitation and emission spectra, fluorescence quantum yields (Φ(F)) , lifetimes (τ(F)), and other photophysical parameters of the three new TBT derivatives were measured in DMSO solutions at room temperature. For the methyl-and methoxy-substituted TBT derivatives, the fluorescence emission peak were slightly red shifted relative to that of unsubstituted TBT (Δλ(em) = 1-12 nm) whereas, in the case of 6-MeO-TBT-2-COOMe, a rather strong red-shift (Δλ(em) = 73 nm) was attributed to the existence of a "push-pull" electronic interaction of the MeO and COOMe groups. All Φ(F) values were rather high, varying between 0.11 and 0.35, according to the substituent effect. Fluorescence decays were mono-exponential and τ(F) values were very short, ranging between 0.11 and 0.30 ns for the substituted TBT derivatives until study.

Usefulness of cyclodextrin media for the determination of alpha-cypermethrin by photochemically induced fluorescence: analytical applications to natural waters.

The photochemically induced fluorescence (PIF) spectral properties of alpha-cypermethrin in organic solvents (hexane, dichloromethane, acetonitrile, ethanol) and in cyclodextrin aqueous solutions (beta-CD and 2-hydroxypropyl-beta-CD, 2-HP-beta-CD) were investigated. The photolysis kinetics of alpha-cypermethrin were evaluated in the various media. The PIF signal was found to be significantly enhanced in the CD media relative to the organic solvents. The stoichiometry and the formation constants of the alpha-cypermethrin inclusion complexes formed with the CDs were determined. The analytical performances of the PIF method were improved in the presence of HP-beta-CD relative to the other media, and a CD-enhanced PIF analytical method was developed. The limits of detection and limits of quantification ranged, respectively, between 6 and 98 ng/mL and between 24 and 343 ng/mL, depending on the medium. Application to the analysis of tap water and Senegal natural water samples collected close to agricultural areas and spiked with alpha-cypermethrin yielded satisfactory recoveries going from about 77% to 98%. An interference study of foreign species, including pesticides and inorganic ions likely to be present in natural waters, was also carried out.

Study of the toxicity of diuron and its metabolites formed in aqueous medium during application of the electrochemical advanced oxidation process "electro-Fenton".

Diuron (N'-[3,4-dichlorophenyl]-N,N-dimethylurea) is a herbicide belonging to the phenylurea family, widely used to destroy weeds on uncultivated surfaces. Because of its toxicity for aquatic organisms and suspicion of being carcinogenic for humans, diuron is the object of growing environmental concern. Therefore, we have developed the electro-Fenton method, an electrochemical advanced oxidation process (EAOP), to degrade diuron in aqueous medium, and we have studied the evolution of the toxicity of treated solution during the process. Indeed, the EAOPs catalytically generate hydroxyl radicals that oxidize the persistent organic pollutants, and can ultimately destroy and mineralize them. But, sometimes, relatively toxic organic metabolites are formed during the oxidation reaction. In this work, the evolution of toxicity of diuron aqueous solutions was studied at different initial concentrations, during treatment by the electro-Fenton method. Samples were collected at various electrolysis times and mineralization degrees during the treatment. The toxicity of the samples was measured using the bacteria Vibrio fischeri (Microtox) and the green alga Scenedesmus obliquus. Our results demonstrated that the toxicity of diuron aqueous solutions (concentrations=3.0-27.6 mg L(-1)) varied considerably with time. The formation and disappearance of several metabolites, having toxicity often stronger than that of the initial herbicide, were observed. To improve the efficiency of water decontamination, the electro-Fenton method should be applied during a time long enough (several hours) and at relatively high electrolysis current (I=250 mA) to reach a nearly complete mineralization of the herbicide in the aqueous medium.

Fluorescence studies of anti-cancer drugs--analytical and biomedical applications.

The fluorescence properties of anticancer drugs (ACDs), including steady-state native fluorescence, time-resolved fluorescence, fluorescence polarization, excimer and exciplex emission, laser-induced fluorescence (LIF) with one- or two-photon excitation are reviewed, as well as the use of fluorogenic labels and fluorescent probes for the non-fluorescent ACDs. The interest of monitoring the fluorescence spectral changes to study the interactions of ACDs with biomolecules, such as DNA, proteins, vesicles, and the formation of complexes is discussed. The fluorescence methodologies used for ACDs studies, including fluorescence with two-photon excitation, liquid chromatography and capillary electrophoresis with fluorescence and laser-induced fluorescence (LIF) detection, and fluorescence microscopy, are also surveyed. Analytical and bioanalytical applications of fluorescence, indicating good selectivity and very low limits of detection at the nanomolar and picomolar level for most ACDs, are described. Biomedical and clinical applications of the fluorescence methods, mostly oriented towards the evaluation of the cytoxicity and anti-tumor potential of ACDs in single cells as well as in biological fluids, including blood, serum, plasma, cerebrospinal fluid, urine and feces, are also discussed in detail. This review is based on selected literature published in the last decade (1994-2003).