Synthesis and characterization of bacteriochlorin loaded magnetic nanoparticles (MNP) for personalized MRI guided photosensitizers delivery to tumor.

HYPOTHESIS: Hydrophobic bacteriochlorin based photosensitizer (PS) can be effectively immobilized on MNP covered by human serum albumin (HSA). PS loading into MNP protein shell allows solubilizing PS in water solution without altering its photodynamic activity. MNP@PS can serve as diagnostic tool for tracking PS delivery to tumor tissues by MRI. EXPERIMENTS: Immobilization on MNP-HSA-PEG was performed by adding PS solution in organic solvents with further purification. MNP@PS were characterized by DLS, HAADF STEM and AFM. Absorbance and fluorescence measurements were used to assess PS photophysical properties before and after immobilization. MNP@PS internalization into CT26 cells was investigated by confocal microscopy in vitro and MRI/IVIS were used for tracking MNP@PS delivery to tumors in vivo. FINDINGS: MNP@PS complexes were stable in water solution and retained PS photophysical activity. The length of side chain affected MNP@PS size, loading capacity and cell internalization. In vitro testing demonstrated MNP@PS delivery to cancer cells followed by photoinduced toxicity. In vivo studies confirmed that as-synthetized complexes can be used for MRI tracking over drug accumulation in tumors.

Ti surface doping of LiNi0.5Mn1.5O4-δ positive electrodes for lithium ion batteries.

The particle surface of LiNi0.5Mn1.5O4-δ (LNMO), a Li-ion battery cathode material, has been modified by Ti cation doping through a hydrolysis-condensation reaction followed by annealing in oxygen. The effect of different annealing temperatures (500-850 °C) on the Ti distribution and electrochemical performance of the surface modified LNMO was investigated. Ti cations diffuse from the preformed amorphous 'TiO x ' layer into the LNMO surface during annealing at 500 °C. This results in a 2-4 nm thick Ti-rich spinel surface having lower Mn and Ni content compared to the core of the LNMO particles, which was observed with scanning transmission electron microscopy coupled with compositional EDX mapping. An increase in the annealing temperature promotes the formation of a Ti bulk doped LiNi(0.5-w)Mn(1.5+w)-t Ti t O4 phase and Ti-rich LiNi0.5Mn1.5-y Ti y O4 segregates above 750 °C. Fourier-transform infrared spectrometry indicates increasing Ni-Mn ordering with annealing temperature, for both bare and surface modified LNMO. Ti surface modified LNMO annealed at 500 °C shows a superior cyclic stability, coulombic efficiency and rate performance compared to bare LNMO annealed at 500 °C when cycled at 3.4-4.9 V vs. Li/Li+. The improvements are probably due to suppressed Ni and Mn dissolution with Ti surface doping.

Correction: Composition-dependent charge transfer and phase separation in the V1-xRexO2 solid solution.

Correction for 'Composition-dependent charge transfer and phase separation in the V1-xRexO2 solid solution' by D. Mikhailova, et al., Dalton Trans., 2017, 46, 1606-1617.

Composition-dependent charge transfer and phase separation in the V1-xRexO2 solid solution.

The substitution of vanadium in vanadium dioxide VO2 influences the critical temperatures of structural and metal-to-insulator transitions in different ways depending on the valence of the dopant. Rhenium adopts valence states between +4 and +7 in an octahedral oxygen surrounding and is particularly interesting in this context. Structural investigation of V1-xRexO2 solid solutions (0.01 ≤ x ≤ 0.30) between 80 and 1200 K using synchrotron X-ray powder diffraction revealed only two polymorphs that resemble VO2: the low-temperature monoclinic MoO2-type form (space group P21/c), and the tetragonal rutile-like form (space group P42/mnm). However, for compositions with 0.03 < x ≤ 0.15 a phase separation in the solid solution was observed below 1000 K upon cooling down from 1200 K, giving rise to two isostructural phases with slightly different lattice parameters. This is reflected in the appearance of two metal-to-insulator transition temperatures detected by magnetization and specific heat measurements. Comprehensive X-ray photoelectron spectroscopy studies showed that an increased amount of Re leads to a change in the Re valence state from solely Re6+ at a low doping level (≤3 at% Re) via mixed-valence states Re4+/Re6+ for at least 0.03 < x ≤ 0.10, up to nearly pure Re4+ in V0.70Re0.30O2. Thus, compositions V1-xRexO2 with only one valence state of Re in the material (Re6+ or Re4+) can be obtained as a single phase, while intermediate compositions are subjected to a phase separation, presumably due to different valence states of Re.

Relationship between the Size of Magnetic Nanoparticles and Efficiency of MRT Imaging of Cerebral Glioma in Rats.

BSA-coated Fe3O4 nanoparticles with different hydrodynamic diameters (36±4 and 85±10 nm) were synthesized, zeta potential and T2 relaxivity were determined, and their morphology was studied by transmission electron microscopy. Studies on rats with experimental glioma C6 showed that smaller nanoparticles more effectively accumulated in the tumor and circulated longer in brain vessels. Optimization of the hydrodynamic diameter improves the efficiency of MRT contrast agent.

Synthesis, structure and magnetic ordering of the mullite-type Bi2Fe(4-x)CrxO9 solid solutions with a frustrated pentagonal Cairo lattice.

Highly homogeneous mullite-type solid solutions Bi2Fe(4-x)CrxO9 (x = 0.5, 1, 1.2) were synthesized using a soft chemistry technique followed by a solid-state reaction in Ar. The crystal structure of Bi2Fe3CrO9 was investigated using X-ray and neutron powder diffraction, transmission electron microscopy and (57)Fe Mössbauer spectroscopy (S.G. Pbam, a = 7.95579(9) Å, b = 8.39145(9) Å, c = 5.98242(7) Å, RF(X-ray) = 0.022, RF(neutron) = 0.057). The ab planes in the structure are tessellated with distorted pentagonal loops built up by three tetrahedrally coordinated Fe sites and two octahedrally coordinated Fe/Cr sites, linked together in the ab plane by corner-sharing forming a pentagonal Cairo lattice. Magnetic susceptibility measurements and powder neutron diffraction show that the compounds order antiferromagnetically (AFM) with the Néel temperatures decreasing upon increasing the Cr content from TN ∼ 250 K for x = 0 to TN ∼ 155 K for x = 1.2. The magnetic structure of Bi2Fe3CrO9 at T = 30 K is characterized by a propagation vector k = (1/2,1/2,1/2). The tetrahedrally coordinated Fe cations form singlet pairs within dimers of corner-sharing tetrahedra, but spins on the neighboring dimers are nearly orthogonal. The octahedrally coordinated (Fe,Cr) cations form antiferromagnetic up-up-down-down chains along c, while the spin arrangement in the ab plane is nearly orthogonal between nearest neighbors and collinear between second neighbors. The resulting magnetic structure is remarkably different from the one in pure Bi2Fe4O9 and features several types of spin correlations even on crystallographically equivalent exchange that may be caused by the simultaneous presence of Fe and Cr on the octahedral site.

{110}-Layered B-cation ordering in the anion-deficient perovskite Pb2.4Ba2.6Fe2Sc2TiO13 with the crystallographic shear structure.

A novel anion-deficient perovskite-based compound, Pb(2.4)Ba(2.6)Fe(2)Sc(2)TiO(13), was synthesized via the citrate-based route. This compound is an n = 5 member of the AnBnO(3n-2) homologous series with unit-cell parameters related to the perovskite subcell a(p)≈ 4.0 Å as a(p)√2 ×a(p)× 5a(p)√2. The crystal structure of Pb(2.4)Ba(2.6)Fe(2)Sc(2)TiO(13) consists of quasi-2D perovskite blocks with a thickness of three octahedral layers separated by the 1/2[110](1[combining macron]01)(p) crystallographic shear (CS) planes, which are parallel to the {110} plane of the perovskite subcell. The CS planes transform the corner-sharing octahedra into chains of edge-sharing distorted tetragonal pyramids. Using a combination of neutron powder diffraction, (57)Fe Mössbauer spectroscopy and atomic resolution electron energy-loss spectroscopy we demonstrate that the B-cations in Pb(2.4)Ba(2.6)Fe(2)Sc(2)TiO(13) are ordered along the {110} perovskite layers with Fe(3+) in distorted tetragonal pyramids along the CS planes, Ti(4+) preferentially in the central octahedra of the perovskite blocks and Sc(3+) in the outer octahedra of the perovskite blocks. Magnetic susceptibility and Mössbauer spectroscopy indicate a broadened magnetic transition around T(N)∼ 45 K and the onset of local magnetic fields at low temperatures. The magnetic order is probably reminiscent of that in other AnBnO(3n-2) homologues, where G-type AFM order within the perovskite blocks has been observed.

Origin of voltage decay in high-capacity layered oxide electrodes.

Although Li-rich layered oxides (Li1+xNiyCozMn1-x-y-zO2 > 250 mAh g(-1)) are attractive electrode materials providing energy densities more than 15% higher than today's commercial Li-ion cells, they suffer from voltage decay on cycling. To elucidate the origin of this phenomenon, we employ chemical substitution in structurally related Li2RuO3 compounds. Li-rich layered Li2Ru1-yTiyO3 phases with capacities of ~240 mAh g(-1) exhibit the characteristic voltage decay on cycling. A combination of transmission electron microscopy and X-ray photoelectron spectroscopy studies reveals that the migration of cations between metal layers and Li layers is an intrinsic feature of the charge-discharge process that increases the trapping of metal ions in interstitial tetrahedral sites. A correlation between these trapped ions and the voltage decay is established by expanding the study to both Li2Ru1-ySnyO3 and Li2RuO3; the slowest decay occurs for the cations with the largest ionic radii. This effect is robust, and the finding provides insights into new chemistry to be explored for developing high-capacity layered electrodes that evade voltage decay.

Structural and magnetic phase transitions in the A(n)B(n)O(3n-2) anion-deficient perovskites Pb2Ba2BiFe5O13 and Pb(1.5)Ba(2.5)Bi2Fe6O16.

Novel anion-deficient perovskite-based ferrites Pb2Ba2BiFe5O13 and Pb(1.5)Ba(2.5)Bi2Fe6O16 were synthesized by solid-state reaction in air. Pb2Ba2BiFe5O13 and Pb(1.5)Ba(2.5)Bi2Fe6O16 belong to the perovskite-based A(n)B(n)O(3n-2) homologous series with n = 5 and 6, respectively, with a unit cell related to the perovskite subcell a(p) as a(p)√2 × a(p) × na(p)√2. Their structures are derived from the perovskite one by slicing it with 1/2[110]p(101)p crystallographic shear (CS) planes. The CS operation results in (101)p-shaped perovskite blocks with a thickness of (n - 2) FeO6 octahedra connected to each other through double chains of edge-sharing FeO5 distorted tetragonal pyramids which can adopt two distinct mirror-related configurations. Ordering of chains with a different configuration provides an extra level of structure complexity. Above T ≈ 750 K for Pb2Ba2BiFe5O13 and T ≈ 400 K for Pb(1.5)Ba(2.5)Bi2Fe6O16 the chains have a disordered arrangement. On cooling, a second-order structural phase transition to the ordered state occurs in both compounds. Symmetry changes upon phase transition are analyzed using a combination of superspace crystallography and group theory approach. Correlations between the chain ordering pattern and octahedral tilting in the perovskite blocks are discussed. Pb2Ba2BiFe5O13 and Pb(1.5)Ba(2.5)Bi2Fe6O16 undergo a transition into an antiferromagnetically (AFM) ordered state, which is characterized by a G-type AFM ordering of the Fe magnetic moments within the perovskite blocks. The AFM perovskite blocks are stacked along the CS planes producing alternating FM and AFM-aligned Fe-Fe pairs. In spite of the apparent frustration of the magnetic coupling between the perovskite blocks, all n = 4, 5, 6 A(n)Fe(n)O(3n-2) (A = Pb, Bi, Ba) feature robust antiferromagnetism with similar Néel temperatures of 623-632 K.

Ternary magnesium rhodium boride Mg2Rh1-xB6+2x with a modified Y2ReB6-type crystal structure.

The new ternary magnesium rhodium boride Mg2Rh1-xB6+2x has been prepared by the reaction of the mixture of Mg powder, RhB, and crystalline boron in a Ta container sealed under argon. The crystal structure of Mg2Rh0.75(1)B6.50(4) is determined using single-crystal X-ray diffraction, electron diffraction, and high-resolution electron microscopy (space group Pbam, a=8.795(2) A, b=11.060(2) A, c=3.5279(5) A, Z=4, 630 reflections, RF=0.045). It represents a modified Y2ReB6 structure type with an unusual replacement of part of the Rh atoms by boron pairs located in the pentagonal channels parallel to the c axis. The pairs interconnect the neighboring planar boron nets into the 3D framework. The variation of the lattice parameters reveals a homogeneity range Mg2Rh1-xB6+2x. The random distribution of the Rh atoms and boron pairs and the stabilizing effect of the boron pairs on the Y2ReB6 type structure motif are discussed using electronic band structure calculations and chemical bonding analysis with the electron localization function (ELF).

[Diagnosis and treatment of post-traumatic coagulated hemothorax]. / Diagnostika i lechenie posttravmaticheskogo svernuvshegosia gemotoraksa.

Analysis of 102 cases of coagulated hemothorax (CH) are presented: 32--after penetrating wounds and 70--after closed chest injury. In 57% patients with chest wounds and 72% patients with closed injury the cause of CH was to applying late for medical care. Diagnostic value of X-ray, ultrasonic methods, CT and pleural puncture was studied. Depending on the patients state severity, CH volume and stage of it formation conservative treatment, streptase administration, thoracoscopy and thoracotomy with pleurectomy and lung decortication were performed. Lethality was 2.9%.

[Diagnosis and treatment of diaphragm ruptures]. / Diagnostika i lecheniie razryvov diafragmy.

72 cases of diaphragm's ruptures in patients with serious combined trauma illustrated basic methods of diagnosis in this condition including X-ray, ultrasonic methods, computed tomography and thoracoscopy. In 26.3% of the patients the diagnosis was made during laparotomy or thoracotomy for massive bleeding because of injury of other organs. In the absence of bleeding the diagnosis was based on signs of the abdominal organs dislocation into the pleural cavity. The differential diagnosis between right-sided coagulated hemothorax and diaphragm's right cupula ruptures was the most difficult.