An Approach for the Optimization of Thermal Conductivity and Viscosity of Hybrid (Graphene Nanoplatelets, GNPs: Cellulose Nanocrystal, CNC) Nanofluids Using Response Surface Methodology (RSM).

Response surface methodology (RSM) is used in this study to optimize the thermal characteristics of single graphene nanoplatelets and hybrid nanofluids utilizing the miscellaneous design model. The nanofluids comprise graphene nanoplatelets and graphene nanoplatelets/cellulose nanocrystal nanoparticles in the base fluid of ethylene glycol and water (60:40). Using response surface methodology (RSM) based on central composite design (CCD) and mini tab 20 standard statistical software, the impact of temperature, volume concentration, and type of nanofluid is used to construct an empirical mathematical formula. Analysis of variance (ANOVA) is applied to determine that the developed empirical mathematical analysis is relevant. For the purpose of developing the equations, 32 experiments are conducted for second-order polynomial to the specified outputs such as thermal conductivity and viscosity. Predicted estimates and the experimental data are found to be in reasonable arrangement. In additional words, the models could expect more than 85% of thermal conductivity and viscosity fluctuations of the nanofluid, indicating that the model is accurate. Optimal thermal conductivity and viscosity values are 0.4962 W/m-K and 2.6191 cP, respectively, from the results of the optimization plot. The critical parameters are 50 °C, 0.0254%, and the category factorial is GNP/CNC, and the relevant parameters are volume concentration, temperature, and kind of nanofluid. From the results plot, the composite is 0.8371. The validation results of the model during testing indicate the capability of predicting the optimal experimental conditions.

Detection of Corona Faults in Switchgear by Using 1D-CNN, LSTM, and 1D-CNN-LSTM Methods.

The damaging effects of corona faults have made them a major concern in metal-clad switchgear, requiring extreme caution during operation. Corona faults are also the primary cause of flashovers in medium-voltage metal-clad electrical equipment. The root cause of this issue is an electrical breakdown of the air due to electrical stress and poor air quality within the switchgear. Without proper preventative measures, a flashover can occur, resulting in serious harm to workers and equipment. As a result, detecting corona faults in switchgear and preventing electrical stress buildup in switches is critical. Recent years have seen the successful use of Deep Learning (DL) applications for corona and non-corona detection, owing to their autonomous feature learning capability. This paper systematically analyzes three deep learning techniques, namely 1D-CNN, LSTM, and 1D-CNN-LSTM hybrid models, to identify the most effective model for detecting corona faults. The hybrid 1D-CNN-LSTM model is deemed the best due to its high accuracy in both the time and frequency domains. This model analyzes the sound waves generated in switchgear to detect faults. The study examines model performance in both the time and frequency domains. In the time domain analysis (TDA), 1D-CNN achieved success rates of 98%, 98.4%, and 93.9%, while LSTM obtained success rates of 97.3%, 98.4%, and 92.4%. The most suitable model, the 1D-CNN-LSTM, achieved success rates of 99.3%, 98.4%, and 98.4% in differentiating corona and non-corona cases during training, validation, and testing. In the frequency domain analysis (FDA), 1D-CNN achieved success rates of 100%, 95.8%, and 95.8%, while LSTM obtained success rates of 100%, 100%, and 100%. The 1D-CNN-LSTM model achieved a 100%, 100%, and 100% success rate during training, validation, and testing. Hence, the developed algorithms achieved high performance in identifying corona faults in switchgear, particularly the 1D-CNN-LSTM model due to its accuracy in detecting corona faults in both the time and frequency domains.

GPU-accelerated image registration algorithm in ophthalmic optical coherence tomography.

Limited to the power of the light source in ophthalmic optical coherence tomography (OCT), the signal-to-noise ratio (SNR) of the reconstructed images is usually lower than OCT used in other fields. As a result, improvement of the SNR is required. The traditional method is averaging several images at the same lateral position. However, the image registration average costs too much time, which limits its real-time imaging application. In response to this problem, graphics processing unit (GPU)-side kernel functions are applied to accelerate the reconstruction of the OCT signals in this paper. The SNR of the images reconstructed from different numbers of A-scans and B-scans were compared. The results demonstrated that: 1) There is no need to realize the axial registration with every A-scan. The number of the A-scans used to realize axial registration is suitable to set as ∼25, when the A-line speed was set as ∼12.5kHz. 2) On the basis of ensuring the quality of the reconstructed images, the GPU can achieve 43× speedup compared with CPU.

Detection of Dihydrocoumarin in Coconut Juice via Photoelectric Detection System Based on Ultraviolet Absorption Spectrometry.

Based on ultraviolet absorption spectroscopy technology combined with stoichiometry, a portable photoelectric detection system with wireless transmission was designed with the advantages of simple operation, low cost, and quick response to realize the non-destructive detection of dihydrocoumarin content in coconut juice. Through the detection of a sample solution, the light intensity through the solution is measured and converted into absorbance. Particle swarm optimization (PSO) is applied to optimize support vector regression (SVR) to establish a corresponding concentration prediction model. At the same time, in order to solve the shortcomings of the conventional portable photoelectric detection equipment in data storage, data transmission, and other aspects, based on the optimal PSO-SVR model, we used Python language to develop a friendly graphical user interface (GUI), integrating data collection, storage, analysis, and prediction modeling in one, greatly simplifying the operation process. The experimental results show that, compared with the traditional methods, the system achieves the purpose of rapid and non-destructive detection and has a small gap compared with the detection results of the ultraviolet spectrophotometer. It provides a good method for the determination of dihydrocoumarin in coconut juice.

Discharge Enhancement in a Triple-Pipe Heat Exchanger Filled with Phase Change Material.

This study aims to study the discharging process to verify the influence of geometry modifications and heat transfer flow (HTF) patterns on the performance of a vertical triplex-tube latent heat container. The phase change material (PCM) is included in the middle tube, where the geometry is modified using single or multi-internal frustum tubes instead of straight tubes to enhance the discharging rate. The effects of the HTF flow direction, which is considered by the gravity and opposite-gravity directions, are also examined in four different cases. For the optimal geometry, three scenarios are proposed, i.e., employing a frustum tube for the middle tube, for the inner tube, and at last for both the inner and middle tubes. The effects of various gap widths in the modified geometries are investigated. The results show the advantages of using frustum tubes in increasing the discharging rate and reducing the solidification time compared with that of the straight tube unit due to the higher natural convection effect by proper utilization of frustum tubes. The study of the HTF pattern shows that where the HTF direction in both the inner and outer tubes are in the gravity direction, the maximum discharging rate can be achieved. For the best configuration, the discharge time is reduced negligibly compared with that for the system with straight tubes which depends on the dimensions of the PCM domain.

A review on proliferation of artificial intelligence in wind energy forecasting and instrumentation management.

Energy is the source of economic growth, and energy consumption indicates the country's state of development. Energy engineering is a relatively new technical discipline. It is increasingly considered as a significant step in meeting carbon reduction targets, which can produce a variety of appealing outcomes that are useful to humanity's evolution. Many countries have adopted national policies to decrease pollution by reducing fossil fuel use and increasing renewable energy usage by alleviating climate change (wind and solar, etc.). The ever-growing need for renewable sources has led to economic and technological problems, such as wind energy, essential for effective grid control, and the design of a wind project. Precise estimates offer network operators and power system designers vital information for the generation of an appropriate wind turbine and controlling demand and supply power. This work provides an in-depth study of the proliferation of artificial intelligence (AI) in the prediction of wind energy generation. The devices employed to calculate wind speed are examined and discussed, with a focus on studies recently published. This review's findings show that AI is being employed in power wind energy measurement and forecasts. When compared to individual systems, the hybrid AI system gives more accurate findings. The discussion also found that correct handling and calibration of the anemometer can increase predicting accuracy. This conclusion suggests that increasing the accuracy of wind forecasting can be accomplished by lowering equipment errors that measure the meteorological parameter and mitigate carbon emission.

Solar irradiance measurement instrumentation and power solar generation forecasting based on Artificial Neural Networks (ANN): A review of five years research trend.

The increased demand for solar renewable energy sources has created recent interest in the economic and technical issues related to the integration of Photovoltaic (PV) into the grid. Solar photovoltaic power generation forecasting is a crucial aspect of ensuring optimum grid control and power solar plant design. Accurate forecasting provides significant information to grid operators and power system designers in generating an optimal solar photovoltaic plant and to manage the power of demand and supply. This paper presents an extensive review on the implementation of Artificial Neural Networks (ANN) on solar power generation forecasting. The instrument used to measure the solar irradiance is analysed and discussed, specifically on studies that were published from February 1st, 2014 to February 1st, 2019. The selected papers were obtained from five major databases, namely, Direct Science, IEEE Xplore, Google Scholar, MDPI, and Scopus. The results of the review demonstrate the increased application of ANN on solar power generation forecasting. The hybrid system of ANN produces accurate results compared to individual models. The review also revealed that improvement forecasting accuracy can be achieved through proper handling and calibration of the solar irradiance instrument. This finding indicates that improvements in solar forecasting accuracy can be increased by reducing instrument errors that measure the weather parameter.

A Novel Eddy Current Testing Error Compensation Technique Based on Mamdani-Type Fuzzy Coupled Differential and Absolute Probes.

Eddy current testing (ECT) is an accurate, widely used and well-understood inspection technique, particularly in the aircraft and nuclear industries. The coating thickness or lift-off will influence the measurement of defect depth on pipes or plates. It will be an uncertain decision condition whether the defects on a workpiece are cracks or scratches. This problem can lead to the occurrence of pipe leakages, besides causing the degradation of a company’s productivity and most importantly risking the safety of workers. In this paper, a novel eddy current testing error compensation technique based on Mamdani-type fuzzy coupled differential and absolute probes was proposed. The general descriptions of the proposed ECT technique include details of the system design, intelligent fuzzy logic design and Simulink block development design. The detailed description of the proposed probe selection, design and instrumentation of the error compensation of eddy current testing (ECECT) along with the absolute probe and differential probe relevant to the present research work are presented. The ECECT simulation and hardware design are proposed, using the fuzzy logic technique for the development of the new methodology. The depths of the defect coefficients of the probe’s lift-off caused by the coating thickness were measured by using a designed setup. In this result, the ECECT gives an optimum correction for the lift-off, in which the reduction of error is only within 0.1% of its all-out value. Finally, the ECECT is used to measure lift-off in a range of approximately 1 mm to 5 mm, and the performance of the proposed method in non-linear cracks is assessed.

An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design.

The use of the eddy current technique (ECT) for the non-destructive testing of conducting materials has become increasingly important in the past few years. The use of the non-destructive ECT plays a key role in the ensuring the safety and integrity of the large industrial structures such as oil and gas pipelines. This paper introduce a novel ECT probe design integrated with the distributed ECT inspection system (DSECT) use for crack inspection on inner ferromagnetic pipes. The system consists of an array of giant magneto-resistive (GMR) sensors, a pneumatic system, a rotating magnetic field excitation source and a host PC acting as the data analysis center. Probe design parameters, namely probe diameter, an excitation coil and the number of GMR sensors in the array sensor is optimized using numerical optimization based on the desirability approach. The main benefits of DSECT can be seen in terms of its modularity and flexibility for the use of different types of magnetic transducers/sensors, and signals of a different nature with either digital or analog outputs, making it suited for the ECT probe design using an array of GMR magnetic sensors. A real-time application of the DSECT distributed system for ECT inspection can be exploited for the inspection of 70 mm carbon steel pipe. In order to predict the axial and circumference defect detection, a mathematical model is developed based on the technique known as response surface methodology (RSM). The inspection results of a carbon steel pipe sample with artificial defects indicate that the system design is highly efficient.

Giant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications.

Non-destructive eddy current testing (ECT) is widely used to examine structural defects in ferromagnetic pipe in the oil and gas industry. Implementation of giant magnetoresistance (GMR) sensors as magnetic field sensors to detect the changes of magnetic field continuity have increased the sensitivity of eddy current techniques in detecting the material defect profile. However, not many researchers have described in detail the structure and issues of GMR sensors and their application in eddy current techniques for nondestructive testing. This paper will describe the implementation of GMR sensors in non-destructive testing eddy current testing. The first part of this paper will describe the structure and principles of GMR sensors. The second part outlines the principles and types of eddy current testing probe that have been studied and developed by previous researchers. The influence of various parameters on the GMR measurement and a factor affecting in eddy current testing will be described in detail in the third part of this paper. Finally, this paper will discuss the limitations of coil probe and compensation techniques that researchers have applied in eddy current testing probes. A comprehensive review of previous studies on the application of GMR sensors in non-destructive eddy current testing also be given at the end of this paper.

Detrended fluctuation analysis as a statistical method to study ion single channel signal.

The scaling behaviors of ion single channel current signal time series could be analyzed by means of detrended fluctuation analysis. Nevertheless, the statistical analysis of an ionic current signal recorded from voltage dependence K+ single channel is presented. The detrended fluctuation analysis (DFA) exponent alpha is significantly larger than 0.5, as (DFA) exponents were calculated for 4 different pipette potentials in rat dorsal root ganglion neurons. alpha=0.9475+/-0.006 for V=-30 mV; alpha=0.958+/-0.004 for V=-40 mV; alpha=0.966+/-0.005 for V=-50 mV; alpha=0.971+/-0.03 for V=-60 mV. The scaling exponents for different pipette potentials reveal the existence of memory in ion channels, and at the same time, the memory in ion channel depends on the pipette potential. The result of Markovian model data showed that it had different DFA exponent alpha which indicates that long-range correlation effect is present amongst the continued conducting states of the ion channel. Thus a scaling exponent description is found to characterize the fluctuation properties of the non-linear behaviors of ion channel kinetics regardless of whether the channel is in open or closed state.