Prevalence of partial edentulism and RPD design in patients treated at College of Dentistry, Imam Abdulrahman Bin Faisal University, Saudi Arabia.

This study aimed to investigate the prevalence of partial edentulism, RPD type, design, and components and their frequency of use by patients at the prosthodontic clinics of the College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia. The prepared surveys, laboratory authorization forms, and images of the RPD metal frameworks on casts were used for data collection. Two calibrated investigators studied the digital photographs to identify the Kennedy classification, type of RPD, major connector, clasp assembly, and other details. Data was collected and analyzed statistically. The results showed that the most common class of partial edentulism was Kennedy class I, whereas class IV was the least (p < 0.001). Sixty two percent of fabricated RPDs had metal frameworks, whereas 37.2% were frameless. RPI was the most frequently used clasp assembly (38.9%), a significant finding in Kennedy class I(p < 0.01). The maxillary anteroposterior palatal strap and mandibular lingual plate were the most commonly used major connectors, at 41.2% and 60.8%, respectively. Conclusions: Simple RPD design that accomplishes the treatment objectives as well as proper communication with a well-trained dental technician would promote the success of RPDs.

Effect of Nanodiamond Addition on Flexural Strength, Impact Strength, and Surface Roughness of PMMA Denture Base.

PURPOSE: To assess the effect of addition of different concentrations of nanodiamonds (NDs) on flexural strength, impact strength, and surface roughness of heat-polymerized acrylic resin. MATERIALS AND METHODS: 120 specimens were fabricated from heat-polymerized acrylic resin. They were divided into a control group of pure polymethylmethacrylate (PMMA; Major.Base.20) and three tested groups (PMMA-ND) with 0.5%wt, 1%wt, and 1.5%wt of added ND to PMMA. Flexural strength was determined using the three-point bending test. Impact strength was recorded by using a Charpy type impact test. Surface roughness test was performed using a Contour GT machine. One-way ANOVA and Tukey's post-hoc analysis (p ≤ 0.05) were used for statistical analysis. RESULTS: Acrylic resin reinforced with 0.5% ND displayed significantly higher flexural strength than the unreinforced heat-polymerized specimens, acrylic resin reinforced with 1% ND and the 1.5% ND (p < 0.0001). The impact strength of unreinforced heat-polymerized specimens was significantly higher than all nano-composite materials (p < 0.0001) with no significant difference between 1% ND and the 1.5% ND (p > 0.05). The addition of 0.5% ND and 1% ND significantly decreased the surface roughness in comparison to both control and the 1.5% ND groups (p < 0.0001) while no significant differences between 0.5% ND and 1% ND (p > 0.05) were reported. Nano-composite material (0.5% ND) showed significantly lower surface roughness when compared to other specimens. CONCLUSIONS: The addition of NDs to acrylic denture base improved the flexural strength and surface roughness at low concentrations (0.5%), while the impact strength was decreased with ND addition.