Comparing the mechanical properties, microstructure, texture and in-vitro degradation behavior of TNTZ/nano-fluorapatite composite and TNTZ bioalloy.

The present study deals with (i) the fabrication of the composite surface layer of Ti-29Nb-13Ta-4.6Zr/nano-fluorapatite through friction stir processing, (ii) clarifying the correlation of microstructure and texture with in-vitro degradation behavior and bioactivity of fabricated nano-biocomposite, and (iii) comparing the mechanical and functional properties of nano composite whit those obtained for TNTZ bio-alloy. The results indicated that increasing the number of deformation passes effectively refines the microstructure, leading to the average grain sizes of less than 5 µm. The texture of the material was also evolved in the presence of the nano particles where the grains reorient along <111> direction in contrast to the <101>-oriented grains in the starting microstructure. In-vitro bioactivity of the processed samples was measured after being immersed in simulated body fluid solution for various duration up to 30 days. Enhanced corrosion resistance and bio-mineralization of nanocomposite surface layer was discussed relying on the occurrence of grain refinement, substructure development and evolution of texture components along <101> direction. Assessment of the mechanical properties of the fabricated composites and as-received material also indicated the positive effect of the applied processing route and the presence of nano particles.

Tissue reaction to implanted root-end filling materials in the tibia and mandible of guinea pigs.

The purpose of this study was to examine the tissue reaction to implanted mineral trioxide aggregate (MTA), amalgam, Intermediate Restorative Material, and Super-EBA in the tibias and mandibles of guinea pigs. After anesthetizing 20 guinea pigs, raising tissue flaps, and preparing bony cavities, the test materials were placed in Teflon cups and implanted in the tibias and 10 days later in the mandibles. The animals were euthanized 80 days later and the tissues prepared for histological examination. The presence of inflammation, predominant cell type, and thickness of fibrous connective tissue adjacent to each implant were recorded. The tissue reaction to MTA implantation was the most favorable observed at both sites; as in every specimen, it was free of inflammation (p < 0.01). In the tibia, MTA was the material most often observed with direct bone apposition. Based on these results, MTA seems to be a biocompatible material.

Histologic assessment of mineral trioxide aggregate as a root-end filling in monkeys.

Mineral Trioxide Aggregate (MTA) has been shown in a number of experiments to be a potential root-end filling material. The purpose of this study was to examine the periradicular tissue response of monkeys to MTA and amalgam as root-end fillings. The pulps were removed from all the maxillary incisors of three monkeys. The root canals were prepared and filled with laterally condensed guttapercha and sealer, and the access cavities were restored with amalgam. Buccal mucoperiosteal flaps were raised, and root-end resections were performed before root-end cavity preparation with burs. The root-end cavities in half of the teeth were filled with MTA, while amalgam was placed in the other cavities. After 5 months the periradicular tissue response was evaluated histologically. The results showed no periradicular inflammation adjacent to five of six root ends filled with MTA; also five of six root ends filled with MTA had a complete layer of cementum over the filling. In contrast, all root ends filled with amalgam showed periradicular inflammation, and cementum had not formed over the root-end filling material, although it was present over the cut root end. Based on these results and previous investigations, MTA is recommended as a root-end filling material in man.

Using mineral trioxide aggregate as a pulp-capping material.

This study examined the dental pulp responses in monkeys to mineral trioxide aggregate, or MTA, and a calcium hydroxide preparation when used as pulp-capping materials. After the pulps of 12 mandibular incisors were exposed with a No. 1 round bur, they were capped with either MTA or the calcium hydroxide preparation. After five months, the authors noted no pulpal inflammation in five of six samples capped with MTA, and all six pulps in this group had a complete dentin bridge. In contrast, all of the pulps capped with the calcium hydroxide preparation showed pulpal inflammation, and bridge formation occurred in only two samples. Based on these results, it appears that MTA has the potential to be used as a pulp-capping material during vital pulp therapy.

Mineral trioxide aggregate: a review of a new cement.

The most common materials in endodontics are gutta-percha and sealer. For certain tasks, however, such as repairing perforations or filling apical preparations, a special-purpose material is needed. The "ideal" special-purpose material in endodontics is still elusive. Most of the materials available today have found their way into endodontics from the restorative field without much consideration of the special conditions and requirements of the periradicular tissues. To address some of the these shortcomings, a material called Mineral Trioxide Aggregate cement (MTA) has been developed at Loma Linda University to seal off the pathways of communication between the root canal system and the external surface of the tooth. At LLU, a series of experiments have been conducted to assess the suitability of this new cement. The experiments began with physical properties of the material and biocompatability studies, followed by clinical studies. The results have been promising, offering for the first time the possibility of regeneration rather than just repair.

Effects of ultrasonic root-end cavity preparation on the root apex.

This study determined the effect of bur and ultrasonic preparation on the root apex. After cleaning, shaping, and obturation of root canals of 47 single-rooted teeth and resection of their apexes were done, 24 root-end cavities were prepared with a bur, and the rest were prepared with ultrasonic tips attached to two different ultrasonic units. After photographs of the prepared root ends were taken, their resin replicas were prepared and examined with a scanning electron microscope. Photographs and scanning electron microscope photomicrographs were examined for the presence or absence of cracks. The results showed a significantly higher incidence of crack formation in the walls of root-end cavities prepared by ultrasonic tips compared with those made by the bur.