Evaluation of a collagen-coated, resorbable fiber scaffold loaded with a peptide basic fibroblast growth factor mimetic in a sheep model of rotator cuff repair.

BACKGROUND: A new scaffold design combined with a peptide growth factor was tested prospectively for safety and for improved tendon healing in sheep. METHODS: The infraspinatus tendon was detached and then surgically repaired to the humerus using sutures and anchors in 50 adult sheep. The repairs in 40 of these sheep were reinforced with a scaffold containing F2A, a peptide mimetic of basic fibroblast growth factor. The sheep were examined after 8 or 26 weeks with magnetic resonance imaging, full necropsy, and histopathologic analysis. A second cohort of 30 sheep underwent surgical repair--20 with scaffolds containing F2A. The 30 shoulders were tested mechanically after 8 weeks. RESULTS: The scaffold and F2A showed no toxicity. Scaffold-repaired tendons were 31% thicker than surgically repaired controls (P = .037) at 8 weeks. There was more new bone formed at the tendon footprint in sheep treated with F2A. Surgically repaired tendons delaminated from the humerus across 14% of the footprint area. The extent of delamination decreased to 1.3% with increasing doses of F2A (P = .004). More of the repair tissue at the footprint was tendon-like in the peptide-treated sheep. On mechanical testing, only 7 shoulders tore at the repair site. The repairs in the other 23 shoulders were already stronger than the midsubstance tendon at 8 weeks. CONCLUSIONS: The new scaffold and peptide safely improved tendon healing.

Comparison of the osteogenic potential of OsteoSelect demineralized bone matrix putty to NovaBone calcium-phosphosilicate synthetic putty in a cranial defect model.

The purpose of this study was to compare the osteogenic potential of a synthetic and a demineralized bone matrix (DBM) putty using a cranial defect model in New Zealand white rabbits. Paired, bilateral critical-size defects (10 mm) were prepared in the frontal bones of 12 rabbits and filled with either OsteoSelect DBM Putty or NovaBone calcium-phosphosilicate putty. At days 43 and 91, 6 rabbits were killed and examined via semiquantitative histology and quantitative histomorphometry. Defects filled with the DBM putty were histologically associated with less inflammation and fibrous tissue in the defect and more new bone than the synthetic counterpart at both time points. Histomorphometric analysis revealed that the defects filled with DBM putty were associated with significantly more bone formation at day 43 (70.7% vs 40.7%, P = 0.043) and at day 91 (70.4% vs 39.9%, P = 0.0044). The amount of residual implant was similar for both test groups at each time point.

Association of 3-Dimensional Cartilage and Bone Structure with Articular Cartilage Properties in and Adjacent to Autologous Osteochondral Grafts after 6 and 12 months in a Goat Model.

OBJECTIVE: The articular cartilage of autologous osteochondral grafts is typically different in structure and function from local host cartilage and thereby presents a remodeling challenge. The hypothesis of this study was that properties of the articular cartilage of trochlear autografts and adjacent femoral condyle are associated with the 3-D geometrical match between grafted and contralateral joints at 6 and 12 months after surgery. DESIGN: Autografts were transferred unilaterally from the lateral trochlea (LT) to the medial femoral condyle (MFC) in adult Spanish goats. Operated and contralateral Non-Operated joints were harvested at 6 and 12 months, and analyzed by indentation testing, micro-computed tomography, and histology to compare (1) histological indices of repair, (2) 3-D structure (articular surface deviation, bone-cartilage interface deviation, cartilage thickness), (3) indentation stiffness, and (4) correlations between stiffness and 3-D structure. RESULTS: Cartilage deterioration was present in grafts at 6 months and more severe at 12 months. Cartilage thickness and normalized stiffness of Operated MFC were lower than Non-Operated MFC within the graft and proximal adjacent host regions. Operated MFC articular surfaces were recessed relative to Non-Operated MFC and exhibited lower cartilage stiffness with increasing recession. Sites with large bone-cartilage interface deviations, both proud and recessed, were associated with recessed articular surfaces and low cartilage stiffness. CONCLUSION: The effectiveness of cartilage repair by osteochondral grafting is associated with the match of 3-D cartilage and bone geometry to the native osteochondral structure.

Evaluation of human acellular dermis versus porcine acellular dermis in an in vivo model for incisional hernia repair.

Incisional hernias commonly occur following abdominal wall surgery. Human acellular dermal matrices (HADM) are widely used in abdominal wall defect repair. Xenograft acellular dermal matrices, particularly those made from porcine tissues (PADM), have recently experienced increased usage. The purpose of this study was to compare the effectiveness of HADM and PADM in the repair of incisional abdominal wall hernias in a rabbit model. A review from earlier work of differences between human allograft acellular dermal matrices (HADM) and porcine xenograft acellular dermal matrices (PADM) demonstrated significant differences (P < 0.05) in mechanical properties: Tensile strength 15.7 MPa vs. 7.7 MPa for HADM and PADM, respectively. Cellular (fibroblast) infiltration was significantly greater for HADM vs. PADM (Armour). The HADM exhibited a more natural, less degraded collagen by electrophoresis as compared to PADM. The rabbit model surgically established an incisional hernia, which was repaired with one of the two acellular dermal matrices 3 weeks after the creation of the abdominal hernia. The animals were euthanized at 4 and 20 weeks and the wounds evaluated. Tissue ingrowth into the implant was significantly faster for the HADM as compared to PADM, 54 vs. 16% at 4 weeks, and 58 vs. 20% for HADM and PADM, respectively at 20 weeks. The original, induced hernia defect (6 cm(2)) was healed to a greater extent for HADM vs. PADM: 2.7 cm(2) unremodeled area for PADM vs. 1.0 cm² for HADM at 20 weeks. The inherent uniformity of tissue ingrowth and remodeling over time was very different for the HADM relative to the PADM. No differences were observed at the 4-week end point. However, the 20-week data exhibited a statistically different level of variability in the remodeling rate with the mean standard deviation of 0.96 for HADM as contrasted to a mean standard deviation of 2.69 for PADM. This was significant with P < 0.05 using a one tail F test for the inherent variability of the standard deviation. No significant differences between the PADM and HADM for adhesion, inflammation, fibrous tissue or neovascularization were noted.

Abdominal ventral hernia repair with current biological prostheses: an experimental large animal model.

Biologic prostheses have emerged to address the limitations of synthetic materials for ventral hernia repairs; however, they lack experimental comparative data. Fifteen swine were randomly assigned to 1 of 3 bioprosthetic groups (DermaMatrix, AlloDerm, and Permacol) after creation of a full thickness ventral fascial defect. At 15 weeks, host incorporation, hernia recurrence, adhesion formation, neovascularization, inflammation, and biomechanical properties were assessed. No animals had hernia recurrence or eventration. DermaMatrix and Alloderm implants demonstrated more adhesions, greater inflammatory infiltration, and more longitudinal laxity, but near identical neovascularization and tensile strength to Permacol. We found that porcine acellular dermal products (Permacol) contain following essential properties of an ideal ventral hernia repair material: low inflammation, less elastin and stretch, lower adhesion rates and cost, and more contracture. The addition of lower cost xenogeneic acellular dermal products to the repertoire of available acellular dermal products demonstrates promise, but requires long-term clinical studies to verify advantages and efficacy.

Cartilage regeneration and repair testing in a surrogate large animal model.

The aging human population is experiencing increasing numbers of symptoms related to its degenerative articular cartilage (AC), which has stimulated the investigation of methods to regenerate or repair AC. However, the seemingly inherent limited capacity for AC to regenerate persists to confound the various repair treatment strategies proposed or studied. Animal models for testing AC implant devices and reparative materials are an important and required part of the Food and Drug Administration approval process. Although final testing is ultimately performed in humans, animal testing allows for a wider range of parameters and combinations of test materials subjected to all the biological interactions of a living system. We review here considerations, evaluations, and experiences with selection and use of animal models and describe two untreated lesion models useful for testing AC repair strategies. These created lesion models, one deep (6 mm and through the subchondral plate) the other shallow (to the level of the subchondral bone plate) were placed in the middle one-third of the medial femoral condyle of the knee joints of goats. At 1-year neither the deep nor the shallow full-thickness chondral defects generated a repair that duplicated natural AC. Moreover, progressive deleterious changes occurred in the AC surrounding the defects. There are challenges in translation from animals to humans as anatomy and structures are different and immobilization to protect delicate repairs can be difficult. The tissues potentially generated by proposed cartilage repair strategies must be compared with the spontaneous changes that occur in similarly created untreated lesions. The prevention of the secondary changes in the surrounding cartilage and subchondral bone described in this article should be addressed with the introduction of treatments for repairs of the articulating surface.

Norian craniofacial repair system: compatibility with resorbable and nonresorbable plating materials.

BACKGROUND: Choice of bone replacement materials is important when reconstructing large craniofacial defects. Hydroxyapatite cements are often used for such reconstructions. Recent advances in the development of these cements have produced locally applied, in situ hardening materials excellent for use in craniofacial defects. To date, there has been a paucity of data comparing the use of calcium phosphate cements in combination with titanium or resorbable plating systems and their combined biocompatibility. An experimental dog model was used to compare these systems. METHODS: Two 4 x 4-cm calvarial defects were created in each of 18 mongrel dogs, and defects were reconstructed with calcium phosphate cement with either titanium or resorbable mesh sheets to evaluate their interaction. Specimens were harvested and evaluated histologically for the development of new bone formation at 3, 6, and 12 months. RESULTS: At 3 months, no differences were noted in the amount of bone formed between titanium and resorbable plating. By 6 months, the resorbable mesh sheet showed delayed bone formation compared with the titanium mesh. At 12 months, bone formation over the resorbable mesh accelerated to be no different from the titanium mesh. Importantly, new bone formation was seen within the monocalcium phosphate cement Norian Craniofacial Repair System on a reliable basis, regardless of mesh plate used. CONCLUSIONS: There are no long-term adverse effects with the use of Norian cement with either titanium or resorbable mesh. However, further studies need to be conducted to determine why there is an arrested healing phase between 3 and 6 months with the Norian cement and resorbable plating materials.

Biological fixation of hydroxyapatite-coated versus grit-blasted titanium hip stems: a canine study.

BACKGROUND: The purpose of the study was to evaluate the influence of a proximal hydroxyapatite (HA) coating in comparison with a grit-blasted titanium surface of an anatomic hip stem in an animal model over a maximum duration of 2 years. METHODS: Thirty adult dogs underwent implantation of either a proximally HA-coated or a grit-blasted anatomic titanium stem. The animals were clinically evaluated for their walking ability, and serial radiographs were taken. The femora were assessed histomorphologically at set time points from 6 weeks to 2 years postoperatively. Undecalcified thin section specimens through the proximal and distal portion of the coating or grit blasting were prepared. The percentage of implant surface with direct bone contact without connective tissue involvement was determined. RESULTS: Radiographically, animals with uncoated prostheses showed characteristic signs of loosening more frequently. Histomorphometrically, an average of 65% of the surface of HA-coated implants had bone contact, but only 14.7% of the surface of grit-blasted prostheses ( p=0.0001). There was no relationship between bone contact and the duration of implantation of the prosthesis, either for the coated or for the uncoated prostheses. HA coating enhances osseointegration of an anatomic hip stem. CONCLUSION: Anatomic stems with rounded design require a surface coating or surface structure, since the mere grit-blasting of the titanium surface does not ensure osseointegration in this animal model.