RESUMO
Aqueous polymeric films have potentially great values in drug development, particularly in controlled drug release and taste masking strategies. However the progressive polymer-particle coalescence that occurs randomly during film formation, curing and storage may render the film less permeable leading to erratic and unpredictable drug release profile. The focus of this study was to investigate the impacts of the in situ formation of polymer-drug nanoconjugate, at the interfacial nano-domains of two oppositely charged polymers, on the mechanism of film formation and to prepare aqueous ternary polymer-drug-polymer nanomatrix films as a novel green strategy for the delivery of ibuprofen, a model poorly soluble drug. Composite and Layer-by-Layer films were prepared by aqueous casting technique using the concept of combined polymer-drug self-assembly and polyelectrolyte complexation. The plain and drug-loaded nanomatrix films were characterized using SEM, AFM, FTIR, DSC and TGA. Ibuprofen formed spherical core-shell microstructures (4.55-9.73µm) in gellan film. However in the presence of cationic dextran (Ddex), nanoconjugates (61.49±5.97-447.52±37.51nm) were formed within the core of the film matrix. The composite films exhibited reduced tensile strength and lower elastic modulus with optimal conjugation efficiency of 98.14±1.19%, which correlates with higher dissolution efficiency (99.76%) compared to 47.37% in layer-by-layer (LbL) films, dictated by Ddex concentration. Generally, the mechanism of drug release was by Fickian diffusion, however anomalous transport or polymer relaxation was also observed at higher concentration of Ddex. This study demonstrated the potential application of aqueous drug-loaded nanomatrix films as controlled drug delivery strategy for ibuprofen, a model poorly soluble drug.
Assuntos
Ibuprofeno/química , Nanopartículas/química , Água/química , Cátions/química , Química Farmacêutica/métodos , Preparações de Ação Retardada/química , Dextranos/química , Portadores de Fármacos/química , Composição de Medicamentos/métodos , Sistemas de Liberação de Medicamentos/métodos , Liberação Controlada de Fármacos , Tamanho da Partícula , Polímeros/química , Polissacarídeos Bacterianos/química , SolubilidadeRESUMO
One step aqueous melt-crystallization and in situ granulation was utilized to produce ibuprofen-cationic dextran [diethylaminoethyl dextran (Ddex)] conjugate crystanules without the use of surfactants or organic solvents. This study investigates the mechanism of in situ granulation-induced crystanule formation using ibuprofen (Ibu) and Ddex. Laboratory scale batch aqueous crystallization system containing in situ monitoring probes for particle vision measurement (PVM), UV-vis measurement and focused beam reflectance measurements (FBRM) was adapted using pre-defined formulation and process parameters. Pure ibuprofen showed nucleation domain between 25 and 64°C, producing minicrystals with onset of melting at 76°C and enthalpy of fusion (ΔH) of 26.22kJ/mol. On the other hand Ibu-Ddex crystanules showed heterogeneous nucleation which produced spherical core-shell structure. PVM images suggest that internalization of ibuprofen in Ddex corona occurred during the melting phase (before nucleation) which inhibited crystal growth inside the Ddex corona. The remarkable decrease in ΔH of the crystanules from 26.22 to 11.96kJ/mol and the presence of broad overlapping DSC thermogram suggests formation of ibuprofen-Ddex complex and crystalline-amorphous transformation. However Raman and FTIR spectra did not show any significant chemical interaction between ibuprofen and Ddex. A significant increase in dissolution efficiency from 45 to 81% within 24h and reduced burst release provide evidence for potential application of crystanules in controlled drug delivery systems. It was evident that in situ granulation of ibuprofen inhibited the aqueous crystallization process. It was concluded that in situ granulation-aqueous crystallization technique is a novel unit operation with potential application in continuous pharmaceutical processing.
Assuntos
Cátions/química , DEAE-Dextrano/química , Dextranos/química , Ibuprofeno/química , Química Farmacêutica/métodos , Cristalização/métodos , Preparações de Ação Retardada/química , Portadores de Fármacos/química , Composição de Medicamentos/métodos , Sistemas de Liberação de Medicamentos/métodos , Estabilidade de Medicamentos , Tamanho da Partícula , Solubilidade , TermodinâmicaRESUMO
The effect of electrostatic interaction between ibuprofen sodium (IbS) and cationic diethylaminoethyl dextran (Ddex), on the tableting properties and ibuprofen release from the conjugate tablet was investigated. Ibuprofen exhibits poor flow, compaction (tableting) and dissolution behavior due to its hydrophobic structure, high cohesive, adhesive and viscoelastic properties therefore it was granulated with cationic Ddex to improve its compression and dissolution characteristics. Electrostatic interaction and hydrogen bonding between IbS and Ddex was confirmed with FT-IR and DSC results showed a stepwise endothermic solid-solid structural transformation from racemic to anhydrous forms between 120 and 175 °C which melted into liquid form at 208.15 °C. The broad and diffused DSC peaks of the conjugate granules as well as the disappearance of ibuprofen melting peak provided evidence for their highly amorphous state. It was evident that Ddex improved the flowability and densification of the granules and increased the mechanical and tensile strengths of the resulting tablets as the tensile strength increased from 0.67 ± 0.0172 to 1.90 ± 0.0038 MPa with increasing Ddex concentration. Both tapping and compression processes showed that the most prominent mechanism of densification were particle slippage, rearrangement and plastic deformation while fragmentation was minimized. Ddex retarded the extent of dissolution in general, indicating potentials for controlled release formulations. Multiple release mechanisms including diffusion; anomalous transport and super case II transport were noted. It was concluded that interaction between ibuprofen sodium and Ddex produced a novel formulation with improved flowability, tableting and dissolution characteristics with potential controlled drug release characteristics dictated by Ddex concentration.
Assuntos
Anti-Inflamatórios não Esteroides/química , DEAE-Dextrano/química , Composição de Medicamentos/métodos , Liberação Controlada de Fármacos , Ibuprofeno/química , Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/farmacocinética , Varredura Diferencial de Calorimetria , Cátions , Preparações de Ação Retardada/química , Portadores de Fármacos/química , Ligação de Hidrogênio , Ibuprofeno/administração & dosagem , Ibuprofeno/farmacocinética , Tamanho da Partícula , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Eletricidade Estática , ComprimidosRESUMO
PURPOSE: The direct impact of intermolecular attraction between ibuprofen and chitosan on crystal behaviour, saturated solubility and dissolution efficiency of ibuprofen was investigated in order to expand the drug delivery strategy for ibuprofen. METHODS: Amorphous nanoparticle complex (nanoplex) was prepared by controlled drug-polymer nanoassembly. Intermolecular attraction was confirmed with surface tension, conductivity measurements and FTIR spectroscopy. The nanoplex was characterized using DSC, TGA and SEM. The in vitro release kinetics and mechanism of drug release were evaluated using mathematical models. RESULTS: The cmc of ibuprofen decreased significantly in the nanoplex (1.85 mM) compared with pure ibuprofen (177.62 mM) suggesting a remarkable affinity between the chitosan and ibuprofen. The disappearance of ibuprofen melting peak in the nanoplex and the broadened DSC endothermic peaks of the nanoplex indicate formation of eutectic amorphous product which corresponded to higher saturated solubility and dissolution velocity. Ibuprofen (aspect ratio 5.16 ± 1.15) was converted into spherical nanoparticle complex with particle size of 14.96 ± 1.162-143.17 ± 17.5247 nm (36-345 folds reduction) dictated by chitosan concentration. Pure ibuprofen exhibited burst release while the nanoplexes showed both fast and extended release profiles. DE increased to a maximum (81.76 ± 2.1031%) with chitosan concentrations at 3.28 × 10-3 g/dm3, beyond which retardation occurred steadily. Major mechanism of drug release from the nanoplex was by diffusion however anomalous transport and super case II transport did occur. CONCLUSION: Ibuprofen-chitosan nanoplex exhibited combined fast and extended release profile dictated by chitosan concentration. This study demonstrated the potential application of drug-polymer nanoconjugate design in multifunctional regulated drug delivery.
Assuntos
Anti-Inflamatórios não Esteroides/administração & dosagem , Quitosana/química , Portadores de Fármacos/química , Ibuprofeno/administração & dosagem , Anti-Inflamatórios não Esteroides/química , Liberação Controlada de Fármacos , Ibuprofeno/química , Cinética , Solubilidade , TermodinâmicaRESUMO
The chemical potentials of drug-polymer electrostatic interaction have been utilized to develop a novel ternary chitosan-ibuprofen-gellan nanogel as controlled transdermal delivery tool for ibuprofen. The ternary nanogels were prepared by a combination of electrostatic nanoassembly and ionic gelation techniques. The electrostatic and hydrophobic interactions as well as hydrogen bonding between ibuprofen and chitosan were confirmed with FTIR, while DSC, TGA and SEM confirmed the physical state, thermal and morphological characteristics, respectively. The ex vivo delivery of ibuprofen onto and across the skin was evaluated based on system specific drug release parameters such as steady state permeation rate, permeability coefficient, permeability enhancement ratio, skin/gel partition coefficient, diffusion coefficient, lag time and release rate constant and mechanisms of release were determined using mathematical models. Interaction between ibuprofen and chitosan produced new spherical eutectic nanoconjugates with remarkable decrease in particle size of ibuprofen from 4580 (length-to-breadth aspect ratio) to a minimum of 14.15 nm (324-times), and thermally stable amorphous characteristics. The nanogels exhibited significant elastic and pseudoplastic characteristics dictated by the concentration of chitosan with maximum swelling capacity of 775% w/w at 6.55 mM chitosan compared with 281.16 and 506.50% for plain gellan and control ibuprofen hydrogel, respectively. Chitosan enhanced the skin penetration, permeability and the rate of transdermal release of ibuprofen by a factor of 4, dictated by the extent of ibuprofen-chitosan ionic interaction and its concentration. The major mechanism of ibuprofen release through the pig skin was drug diffusion however drug partition and matrix erosion also occurred. It was evident that ternary nanogels are novel formulations with potential application in controlled transdermal delivery of ibuprofen.
Assuntos
Quitosana/química , Preparações de Ação Retardada/química , Ibuprofeno/administração & dosagem , Ibuprofeno/química , Polietilenoglicóis/química , Polietilenoimina/química , Polissacarídeos Bacterianos/química , Pele/metabolismo , Administração Cutânea , Animais , Química Farmacêutica/métodos , Quitosana/administração & dosagem , Preparações de Ação Retardada/administração & dosagem , Sistemas de Liberação de Medicamentos/métodos , Hidrogel de Polietilenoglicol-Dimetacrilato/administração & dosagem , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Nanogéis , Tamanho da Partícula , Permeabilidade , Polietilenoglicóis/administração & dosagem , Polietilenoimina/administração & dosagem , Polímeros/química , Suínos , Tecnologia Farmacêutica/métodosRESUMO
PURPOSE: The direct effect of electrostatic interaction between ibuprofen and cationic dextran on the system-specific physicochemical parameters and intrinsic dissolution characteristics of ibuprofen was evaluated in order to develop drug-polymer nanoconjugate as a delivery strategy for poorly soluble drugs. METHODS: Amorphous ibuprofen-DEAE dextran (Ddex) nanoconjugate was prepared using a low energy, controlled amphiphile-polyelectrolyte electrostatic self-assembly technique optimized by ibuprofen critical solubility and Ddex charge screening. Physicochemical characteristics of the nanoconjugates were evaluated using FTIR, DSC, TGA, NMR and SEM relative to pure ibuprofen. The in vitro release profiles and mechanism of ibuprofen release were determined using mathematical models including zero and first order kinetics; Higuchi; Hixson-Crowell and Korsmeyer-Peppas. RESULTS: Electrostatic interaction between ibuprofen and Ddex was confirmed with FT-IR, (1)H NMR and (13)C NMR spectroscopy. The broad and diffused DSC peaks of the nanoconjugate as well as the disappearance of ibuprofen melting peak provided evidence for their highly amorphous state. Low concentrations of Ddex up to 1.0 × 10(-6) g/dm(3) enhanced dissolution of ibuprofen to a maximum of 81.32% beyond which retardation occurred steadily. Multiple release mechanisms including diffusion; discrete drug dissolution; anomalous transport and super case II transport were noted. CONCLUSIONS: Controlled assembly of ibuprofen and Ddex produced a novel formulation with potential extended drug release dictated by Ddex concentration.
Assuntos
DEAE-Dextrano/química , Portadores de Fármacos , Química Verde , Ibuprofeno/química , Nanopartículas , Tecnologia Farmacêutica/métodos , Varredura Diferencial de Calorimetria , Cátions , Química Farmacêutica , Preparações de Ação Retardada , Cinética , Espectroscopia de Ressonância Magnética , Microscopia Eletrônica de Varredura , Nanotecnologia , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Eletricidade Estática , TermogravimetriaRESUMO
The direct effect of intermolecular association between ibuprofen and diethylaminoethyl dextran (Ddex) and the novel 'melt-in situ granulation-crystallization' technique on the solubility, dose distribution, in vitro dissolution kinetics and pre-compression characteristics of the ibuprofen-Ddex conjugate crystanules have been investigated using various mathematical equations and statistical moments. The research intention was to elucidate the mechanisms of ibuprofen solubilization, densification and release from the conjugate crystanules as well as its dose distribution in order to provide fundamental knowledge on important physicochemical, thermodynamic and system-specific parameters which are key indices for the optimization of drug-polymer conjugate design for the delivery of poorly soluble drugs. The process of melt-in situ-granulation-crystallization reduced the solubility slightly compared with pure ibuprofen, however, the ibuprofen-Ddex conjugate crystanules exhibited increased ibuprofen solubility to a maximum of 2.47×10(-1) mM (at 1.25×10(-4) mM Ddex) and 8.72×10(-1) mM (at 6.25×10(-4) mM Ddex) at 25 and 37 °C, respectively. Beyond these concentrations of Ddex ibuprofen solubility decreased steadily due to stronger bond strength of the conjugate crystanules. The enthalpy-entropy compensation plot suggests a dominant entropy-driven mechanism of solubilization. In the same vein, the addition of Ddex increased the rate and extent of in vitro ibuprofen release from the conjugate crystanule to 100% within 168 h at Ddex concentration of 1.56×10(-4) mM, followed by a decrease with Ddex concentration. The conjugate crystanules exhibited controlled and extended-complete release profile which appeared to be dictated by the concentration of the Ddex and its strong affinity for ibuprofen. A comparison of the real experimental with the predicted data using artificial neural network shows excellent correlation between solubility and dissolution profiles (average error=0.2348%). Heckel, Kawakita, Cooper-Eaton and Kuno equations were employed to determine the mechanism of densification during tapping process. Ddex in the crystanules consistently improved particle rearrangement in the order of 2.5-7 folds compared with pure ibuprofen and stabilized ibuprofen against fragmentation during tapping process. Primary and secondary particle rearrangements were the prominent mechanisms of densification while deformation and fragmentation did not occur. Lower concentrations of Ddex below its critical granular concentration (<6.25×10(-4) mM) hindered plastic deformation and fragmentation, however, the summation of primary and secondary rearrangement parameters was greater than unity suggesting that the overall rearrangement of the conjugate crystanules cannot be explained exclusively by these two steps. This study has demonstrated the formulation of a novel ibuprofen-polymer conjugate which exhibited improved dose distribution and pre-compression characteristics as well as controlled and extended-complete release profiles - a potential drug delivery strategy for poorly soluble drugs.
Assuntos
Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/química , DEAE-Dextrano/química , Portadores de Fármacos/química , Ibuprofeno/administração & dosagem , Ibuprofeno/química , Cristalização , Liberação Controlada de Fármacos , Modelos Teóricos , Redes Neurais de Computação , Tamanho da Partícula , Solubilidade , TermodinâmicaRESUMO
Ibuprofen was recrystallized in the presence of aqueous solution of cationic dextran derivative, Diethylaminoethyl Dextran (Ddex) using the melt-in situ granulation-crystallization technique in order to produce a stable amorphous ibuprofen-Ddex conjugates with improved morphological, micromeritic and thermo-analytical characteristics without the use of organic solvent. Ddex was used in this study because of its ability to form conjugates with various drug molecules and enhance their physicochemical characteristics and therapeutic activities. Cationic dextrans are also biocompatible and biodegradable. Mechanism of conjugation as well as the impact of conjugation on the ibuprofen crystal habit was investigated. Gaussian type normal particle size distribution was obtained and the size of the crystals in the crystanule conjugates decreased steadily, with increasing concentration of Ddex, to a minimum of 480 nm (440-folds reduction, p<0.05, n=20) at Ddex molar concentration of 0.01 mM. FT-IR spectra showed electrostatic interaction and hydrogen bonding between ibuprofen and Ddex which was confirmed with the (1)H NMR and (13)C NMR spectra. DSC curves exhibited single peaks from the binary ibuprofen-Ddex conjugate crystanules suggesting compatibility and formation of an eutectic product. The conjugate crystanules showed broad and diffuse endothermic peaks with a glass transition temperature (T(g)) of 58.3 and 59.14°C at Ddex molar concentrations of 1.56 × 10(-4) and 3.125 × 10(-4)mM respectively confirming the existence of ibuprofen-Ddex crystanule conjugates in amorphous state. Higher concentrations of Ddex decreased T(g) steadily. TGA curves showed first order degradation at low molar concentrations of Ddex up to 3.125 × 10(-4)mM which coincides with the critical granular concentration of the crystanules while higher concentrations exhibited second order degradation profile. This study provides the basis for the development of stable amorphous drug-polymer conjugates with potential practical application in controlled and extended drug release formulations.