Native desert plants have the potential for phytoremediation of phytotoxic metals in urban cities: implications for cities sustainability in arid environments.

Arid regions can benefit from using native desert plants, which require minimal freshwater and can aid in remediating soil phytotoxic metals (PTMs) from traffic emissions. In this study, we assessed the ability of three native desert plants-Pennisetum divisum, Tetraena qatarensis, and Brassica tournefortii-to accumulate phytotoxic metals (PTMs) in their different plant organs, including leaves, stems, and roots/rhizomes. The PTMs were analyzed in soil and plant samples collected from Dubai, United Arab Emirates (UAE). The results indicated significantly higher levels of PTMs on the soil surface than the subsurface layer. Brassica exhibited the highest concentrations of Fe and Zn, measuring 566.7 and 262.8 mg kg-1, respectively, while Tetraena accumulated the highest concentration of Sr (1676.9 mg kg-1) in their stems. In contrast, Pennisetum recorded the lowest concentration of Sr (21.0 mg kg-1), while Tetraena exhibited the lowest concentrations of Fe and Zn (22.5 and 30.1 mg kg-1) in their leaves. The roots of Pennisetum, Brassica, and Tetraena demonstrated the potential to accumulate Zn from the soil, with concentration factors (CF) of 1.75, 1.09, and 1.09, respectively. Moreover, Brassica exhibited the highest CF for Sr, measuring 2.34. Pennisetum, however, could not translocate PTMs from its rhizomes to other plant organs, as indicated by a translocation factor (TF) of 1. In contrast, Brassica effectively translocated the studied PTMs from its roots to the stem and leaves (except for Sr in the leaves). Furthermore, Pennisetum exclusively absorbed Zn from the soil into its leaves and stems, with an enrichment factor (EF) greater than 1. Brassica showed the ability to uptake the studied PTMs in its stem and leaves (except for Fe), while Tetraena primarily absorbed Sr and Zn into its stems. Based on the CF and TF results, Pennisetum appears to be a suitable species for phytostabilization of both Fe and Zn, while Brassica is well-suited for Sr and Zn polluted soils. Tetraena shows potential for Zn phytoremediation. These findings suggest that these plants are suitable for PTMs phytoextraction. Furthermore, based on the EF results, these plants can efficiently sequester PTMs.

Environmental assessment of oyster beds in the northern Arabian Gulf Coast of the United Arab Emirates.

The United Arab of Emirates (UAE) hosts valuable coastal and marine biodiversity, and oysters are one of the habitants of its marine ecosystem. Oysters play an essential role in the nearshore coasts where they work as an active filter. They filter nutrients, phytoplankton, sediments, heavy metals, and toxins out of the water, which improves the water quality. This is the first study that characterizes oyster bed habitats in the UAE by analyzing water quality parameters, polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs)and heavy metals in water, sediments and oyster samples collected from five locations along the coasts of Sharjah, Ajman, and Umm al Quwain. Oyster bed areas supported a diverse assemblage of benthic life including oysters, scallops, pen shells, hard corals, and macroalgae. Mobile species in these habitats included groupers, emperors, snappers, sea snakes, among others. The phytoplankton assemblages were dominated by diatoms, dinoflagellates, and small cryptophytes. Harmful diatom Pseudonitzschia was found in all locations. No detectable concentrations of PAHs and OCPs were reported in this study, and water quality parameters were within the acceptable levels for the region. On the other hand, water quality index was reported marginal, mostly due to the presence of higher than acceptable concentrations of chromium and mercury in all sites studied. Bioconcentration factors concluded that oysters were able to bioconcentrate metals such as arsenic, cadmium, chromium, and zinc, when compared to water. No detectable concentrations of lead and mercury were reported in oysters, suggesting higher depuration rates for those metals.

Potential use of saline resources for biofuel production using halophytes and marine algae: prospects and pitfalls.

There exists a global challenge of feeding the growing human population of the world and supplying its energy needs without exhausting global resources. This challenge includes the competition for biomass between food and fuel production. The aim of this paper is to review to what extent the biomass of plants growing under hostile conditions and on marginal lands could ease that competition. Biomass from salt-tolerant algae and halophytes has shown potential for bioenergy production on salt-affected soils. Halophytes and algae could provide a bio-based source for lignoceelusic biomass and fatty acids or an alternative for edible biomass currently produced using fresh water and agricultural lands. The present paper provides an overview of the opportunities and challenges in the development of alternative fuels from halophytes and algae. Halophytes grown on marginal and degraded lands using saline water offer an additional material for commercial-scale biofuel production, especially bioethanol. At the same time, suitable strains of microalgae cultured under saline conditions can be a particularly good source of biodiesel, although the efficiency of their mass-scale biomass production is still a concern in relation to environmental protection. This review summaries the pitfalls and precautions for producing biomass in a way that limits environmental hazards and harms for coastal ecosystems. Some new algal and halophytic species with great potential as sources of bioenergy are highlighted.

Evolutionary relevance of metabolite production in relation to marine sponge bacteria symbiont.

Sponges are habitats for a diverse community of microorganisms. Sponges provide shelter, whereas microbes provide a complementary defensive mechanism. Here, a symbiotic bacterium, identified as Bacillus spp., was isolated from a marine sponge following culture enrichment. Fermentation-assisted metabolomics using thin-layer chromatography (TLC) and gas chromatography-mass spectrometry (GC-MS) indicated that marine simulated nutrition and temperature was the optimum in metabolite production represented by the highest number of metabolites and the diverse chemical classes when compared to other culture media. Following large-scale culture in potato dextrose broth (PDB) and dereplication, compound M1 was isolated and identified as octadecyl-1-(2',6'-di-tert-butyl-1'-hydroxyphenyl) propionate. M1, at screening concentrations up to 10 mg/ml, showed no activity against prokaryotic bacteria including Staphylococcus aureus and Escherichia coli, while 1 mg/ml of M1 was sufficient to cause a significant killing effect on eukaryotic cells including Candida albicans, Candida auris, and Rhizopus delemar fungi and different mammalian cells. M1 exhibited MIC50 0.97 ± 0.006 and 7.667 ± 0.079 mg/ml against C. albicans and C. auris, respectively. Like fatty acid esters, we hypothesize that M1 is stored in a less harmful form and upon pathogenic attack is hydrolyzed to a more active form as a defensive metabolite. Subsequently, [3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionic acid] (DTBPA), the hydrolysis product of M1, exhibited ~ 8-fold and 18-fold more antifungal activity than M1 against C. albicans and C. auris, respectively. These findings indicated the selectivity of that compound as a defensive metabolite towards the eukaryotic cells particularly the fungi, a major infectious agent to sponges. Metabolomic-assisted fermentation can provide a significant understanding of a triple marine-evolved interaction. KEY POINTS: • Bacillus species, closely related to uncultured Bacillus, is isolated from Gulf marine sponge • Metabolomic-assisted fermentations showed diverse metabolites • An ester with a killing effect against eukaryotes but not prokaryotes is isolated.

Clay-Alginate Beads Loaded with Ionic Liquids: Potential Adsorbents for the Efficient Extraction of Oil from Produced Water.

Produced water (PW) generated from the petroleum industry, during the extraction of oil and gas, has harmful impacts on human health and aquatic life, due to its complex nature. Therefore, it is necessary to treat it before discharging it into the environment in order to avoid serious environmental concerns. In this research, oil adsorption from PW was investigated using clay-alginate beads loaded with ionic liquids (ILs), as the adsorbent material. The effects of several process parameters, such as the initial concentration of oil, contact time, pH, and temperature on the removal efficiency of the beads, were analyzed and optimized. Different characterization methods, such as the Fourier transform infrared spectrophotometer (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and thermal gravimetric analysis (TGA), were used to investigate the surface morphology, the chemical bond structure and functional group, and the thermal stability of the ILs-based beads. The results revealed that the clay-alginate-ILs beads indicated a removal efficiency of 71.8% at the optimum conditions (600 ppm initial oil concentration, 70 min contact time, 10 pH, and at room temperature) with an adsorption capacity of 431 mg/g. The FTIR analysis confirmed the successful chemical bond interaction of the oil with the beads. The SEM analysis verified that the beads have a porous and rough surface, which is appropriate for the adsorption of oil onto the bead's surface. The TGA analysis provides the thermal degradation profile for the clay-alginate-ILs. The beads used in the adsorption process were regenerated and used for up to four cycles.

Primary Amoebic Meningoencephalitis: Potential Application of Ionic Liquids Against Brain-Eating Amoebae?

Naegleria fowleri, a well-known brain-eating amoeba, induces high mortality with no available effective treatment. Ionic liquids are compounds that contain a variety of cations and anions that can be tailored to specific applications. Based on the biological, chemical and physical properties of these ionic liquids, this work proposes the use of ionic liquids as novel anti-Naegleria fowleri biocides.

Ammonium nitrate explosion at the main port in Beirut (Lebanon) and air pollution: an analysis of the spatiotemporal distribution of nitrogen dioxide.

An explosion of the ammonium nitrate (AN) stored at Beirut Port devastated the city on Tuesday 4 August 2020. Such an explosion produces pollutants such as nitrogen oxides (NO x ). The most common NO x is nitrogen dioxide (NO2), which is present in the atmosphere due to natural and anthropogenic processes. The presence of NO2 is used as indicator of air pollution. However, the specific contribution of NO2 to air quality is uncertain due to the presence of other constituents, especially particulate matter (PM10). Research has shown that extended exposure to NO2 may result in serious health effects. This study investigated the impact of the explosion on NO2 levels in the atmosphere above Beirut and the surrounding area. NO2 data from the Sentinel-5P program were used to map the levels of NO2. Furthermore, ground-monitoring data were used to assess the levels of PM10 and ozone (O3) due to the evident association between these constituents and NO2. Results showed that NO2 levels were higher than before the blast. However, 7 days after the explosion, NO2 levels had returned to normal, while the levels of PM10 and O3 remained normal following the explosion. However, a slight increase in the daily average atmospheric pressure was noticed after the explosion, which was attributed to the decomposition of ammonium nitrate.

Antibacterial effects of octadecyl trimethylammonium micelle-clay complex against bacterial eye pathogens: potential as a contact lens disinfectant.

AIM: In this study, we utilized a micelle-clay complex composed of the surfactant octadecyltrimethylammonium bromide and montmorillonite clay and evaluated its antibacterial effects. METHODS: Using Pseudomonas aeruginosa, Staphylococcus epidermidis, and Micrococcus luteus, bactericidal assays were performed to determine the effects of ODTMA-clay complex on the viability of bacterial pathogen at various doses and different intervals of time. Cytotoxicity assays were performed to investigate ODTMA-clay complex effects on human cells, as determined by release of intracellular lactate dehydrogenase. RESULTS: The results revealed that ODTMA-clay complex abolished bacterial viability at 100 µg/mL within 45 min against P. aeruginosa, S. epidermidis, and M. luteus. Cytotoxicity assays revealed that ODTMA-clay complex exhibited minimal toxicity of the human cells. CONCLUSION: Rapid and potent antibacterial effects of ODTMA micelle-clay complex were observed in vitro; however, research is needed to determine precise formulation of contact lens disinfectants comprising ODTMA micelle-clay complex. Additionally, studies should be conducted using in vivo models of keratitis, progressing to pre-clinical and clinical trials. ODTMA micelle-clay complex is an ideal candidate to be incorporated in a novel contact lens disinfectant given the cost-effectiveness and ease of application and can be incorporated as an effective preventative strategy.

Cerebral mucormycosis: intranasal route to deliver amphotericin B for effective management?

As cerebral mucormycosis is devastating in nature, here we discuss possible use of the intranasal route, in comparison to or in addition to intravenous administration, as a therapeutic approach to manage cases of mucormycosis with central nervous system involvement.

Potential Application of Vaporized Drugs via Nasal Inhalers to Prevent Mortality and Central Nervous System Damage Caused by Primary Amoebic Meningoencephalitis Due to Naegleria fowleri.

Here, it is proposed that nasal inhalers with specific anti-Naegleria fowleri drugs or a combination of anti-N. fowleri compounds combined with steroids such as dexamethasone could provide a practical solution for treating primary amoebic meningoencephalitis.

Dual Targeting of Function-Structure for Effective Killing of Pathogenic Free-Living Amoebae.

Here we discuss the potential value of targeting both the hardy structure of the cyst state of the parasite, in addition to the active trophozoite form, to provide target-directed inhibition as a viable drug strategy in the effective eradication of parasites.

Lipophilic Metabolites and Anatomical Acclimatization of Cleome amblyocarpa in the Drought and Extra-Water Areas of the Arid Desert of UAE.

Plants adapt to different environmental conditions by developing structural and metabolic mechanisms. In this study, anatomical features and lipophilic metabolites were investigated in Cleome amblyocarpa Barr. & Murb., Cleomaceae plants growing in the arid desert of United Arab Emirates (UAE) in either low-water or extra-water areas, which were caused by the surrounding road run-off. The plant showed the presence of shaggy-like trichomes. The plant also developed special mechanisms to ensure its survival via release of lipophilic metabolites. The lipophilic metabolites, stained red with Sudan III, were apparently released by glandular trichomes and idioblasts of the shoot and roots, respectively. The identified lipophilic metabolites included those required for drought tolerance, protection against pathogens invasion, and detoxification. Plants growing in the low-water area caused an increase in the production of lipophilic metabolites-in particular, hydrocarbons and terpenoids. The lipophilic metabolites are known to provide the plant with unique waxy surfaces that reduce water loss and avoid penetration by pathogens. The release of lipid metabolites and the presence of shaggy-like trichomes represented unique features of the species that have never been reported. The provided chemical ecology information can be extended for several plant-related applications, particularly including drought tolerance.

Mechanical and phytochemical protection mechanisms of Calligonum comosum in arid deserts.

Unlike animals, plants are sessile organisms, lacking circulating antibodies and specialized immune cells and are exposed to various harsh environmental conditions that make them at risk of being attacked by different pathogens and herbivores. Plants produce chemo-signals to respond to the surroundings and be able to distinguish between harmless and harmful signals. In this study, the production of phytochemicals as plant signaling mechanisms and their defensive roles in disease resistance and repelling herbivores are examined in Calligonum comosum. C. comosum is a leafless standalone perennial shrub widespread in sand dunes. The plant has the ability to survive the drastic environmental conditions of the arid/ hyperarid deserts of the Arabia. Structural anatomy and phytochemicals analyses were used to identify both mechanical and chemical defensive mechanisms in C. comosum. Microscopy-based investigations indicated that stems of this species developed hard structures in its outer layers including sclerenchyma and cluster crystals of calcium oxalate (CaOx). Sclerenchyma and CaOx are difficult to be eaten by herbivores and insects and can harm their mouthparts. On the other hand, the plant developed both short-distance (local) and long-distance (systematic over limited sphere) phytochemicals-producing cells located at its outer regions that is surrounding the inner nutrient-rich vascular system (VS). Local chemical was represented by phenolic idioblasts that were released in response to plant cutting. Systematic chemical was represented by toxic volatile oil containing ~50% benzaldehyde derivative (cuminaldehyde). The oil caused strong killing effect on both mammalian cells and microbial pathogens via either direct addition or indirect exposure to its vapor. The plants lost the oil content and allowed fungal growth once cut and dried. The localization of both defensive mechanisms to the outer region of the plant seemed to protect the inner nutrient-rich VS and hence maintained the plant survival. Surprisingly, in relation to traditional folklore use as medicine, local people use only green parts of the plant and only during the winter, where the plant found devoid of volatile oil and phenolic idioblasts. Moreover, it turns into recommendations for local people to avoid any health problems caused by the plant supply.

Evaluation of fluoride levels in bottled water and their contribution to health and teeth problems in the United Arab Emirates.

Fluoride is needed for better health, yet if ingested at higher levels it may lead to health problems. Fluoride can be obtained from different sources, with drinking water being a major contributor. In the United Arab Emirates (UAE), bottled water is the major source for drinking. The aim of this research is to measure fluoride levels in different bottled water brands sold in UAE, to determine whether fluoride contributes to better health or health problems. The results were compared to international and local standards. Fluoride was present in seven out of 23 brands. One brand exhibited high fluoride levels, which exceeded all standards, suggesting it may pose health problems. Other brands were either below or above standards, suggesting either contribution to better health or health problems, depending on ingested amount. A risk assessment suggested a potential for non-cancer effects from some brands. The results were compared to fluoride levels in bottled water sold in UAE and neighboring countries (e.g. Saudi Arabia, Qatar, Kuwait, and Bahrain), over 24 years, to reflect on changes in fluoride levels in bottled water in this region. The research presents the need for creating, stricter regulations that require careful fluoride monitoring and new regulations that require listing fluoride level on the bottled water label, internationally and regionally. The research will have local and global health impact, as bottled water sold in UAE and neighboring countries, is produced locally and imported from international countries, e.g. Switzerland, the USA, France, Italy, New Zealand, and Fiji.

Trihalomethane formation potential of aquatic and terrestrial fulvic and humic acids: Sorption on activated carbon.

Humic substances (HSs) are precursors for the formation of hazardous disinfection by-products (DBPs) during chlorination of water. Various surrogate parameters have been used to investigate the generation of DBPs by HS precursors and the removal of these precursors by activated carbon treatment. Dissolved organic carbon (DOC)- and ultraviolet absorbance (UVA254)-based isotherms are commonly reported and presumed to be good predictors of the trihalomethane formation potential (THMFP). However, THMFP-based isotherms are rarely published such that the three types of parameters have not been compared directly. Batch equilibrium experiments on activated carbon were used to generate constant-initial-concentration sorption isotherms for well-characterized samples obtained from the International Humic Substances Society (IHSS). HSs representing type (fulvic acid [FA], humic acid [HA]), origin (aquatic, terrestrial), and geographical source (Nordic, Suwannee, Peat, Soil) were examined at pH6 and pH9. THMFP-based isotherms were generated and compared to determine if DOC- and UVA254-based isotherms were good predictors of the THMFP. The sorption process depended on the composition of the HSs and the chemical nature of the activated carbon, both of which were influenced by pH. Activated carbon removal of THM-precursors was pH- and HS-dependent. In some instances, the THMFP existed after UVA254 was depleted.