Curved InGaAs nanowire array lasers grown directly on silicon-on-insulator.

Catalyst-free, selective nano-epitaxy of III-V nanowires provides an excellent materials platform for designing and fabricating ultra-compact, bottom-up photonic crystal lasers. In this work, we propose a new type of photonic crystal laser with a curved cavity formed by InGaAs nanowires grown directly on silicon-on-insulator. This paper investigates the effect of the radius of the curved cavity on the emission wavelength, quality factor as well as laser beam emission angle. We find that the introduction of curvature does not degrade the quality factor of the cavity, thereby offering another degree of freedom when designing low-footprint multiwavelength photonic crystal nanowire lasers. The experimentally demonstrated device shows a lasing threshold of 157 µJ/cm2 at room temperature at telecom O-band wavelengths.

Lateral Tunnel Epitaxy of GaAs in Lithographically Defined Cavities on 220 nm Silicon-on-Insulator.

Current heterogeneous Si photonics usually bond III-V wafers/dies on a silicon-on-insulator (SOI) substrate in a back-end process, whereas monolithic integration by direct epitaxy could benefit from a front-end process where III-V materials are grown prior to the fabrication of passive optical circuits. Here we demonstrate a front-end-of-line (FEOL) processing and epitaxy approach on Si photonics 220 nm (001) SOI wafers to enable positioning dislocation-free GaAs layers in lithographically defined cavities right on top of the buried oxide layer. Thanks to the defect confinement in lateral growth, threading dislocations generated from the III-V/Si interface are effectively trapped within ∼250 nm of the Si surface. This demonstrates the potential of in-plane co-integration of III-Vs with Si on mainstream 220 nm SOI platform without relying on thick, defective buffer layers. The challenges associated with planar defects and coalescence into larger membranes for the integration of on-chip optical devices are also discussed.

O-Band Emitting InAs Quantum Dots Grown By MOCVD On A 300 mm Ge-Buffered Si (001) Substrate.

The epitaxy of III-V semiconductors on silicon substrates remains challenging because of lattice parameter and material polarity differences. In this work, we report on the Metal Organic Chemical Vapor Deposition (MOCVD) and characterization of InAs/GaAs Quantum Dots (QDs) epitaxially grown on quasi-nominal 300 mm Ge/Si(001) and GaAs(001) substrates. QD properties were studied by Atomic Force Microscopy (AFM) and Photoluminescence (PL) spectroscopy. A wafer level µPL mapping of the entire 300 mm Ge/Si substrate shows the homogeneity of the three-stacked InAs QDs emitting at 1.30 ± 0.04 µm at room temperature. The correlation between PL spectroscopy and numerical modeling revealed, in accordance with transmission electron microscopy images, that buried QDs had a truncated pyramidal shape with base sides and heights around 29 and 4 nm, respectively. InAs QDs on Ge/Si substrate had the same shape as QDs on GaAs substrates, with a slightly increased size and reduced luminescence intensity. Our results suggest that 1.3 µm emitting InAs QDs quantum dots can be successfully grown on CMOS compatible Ge/Si substrates.