RESUMO
The precipitation-hardenable nickel-based superalloy Rene 41 exhibits remarkable mechanical characteristics and high corrosion resistance at high temperatures, properties that allow it to be used in high-end applications. This research paper presents findings on the influence of thermal shocks on its microstructure, hardness, and thermal diffusivity at temperatures between 700 and 1000 °C. Solar energy was used for cyclic thermal shock tests. The samples were characterized using microhardness measurements, optical microscopic analysis, scanning electron microscopy coupled with EDS elemental chemical analysis, X-ray diffraction, and flash thermal diffusivity measurements. Structural transformations and the variation of properties were observed with an increase in the number of shocks applied at the same temperature and with temperature variation for the same number of thermal shocks.
RESUMO
This paper presents research on the degradation processes of the fresco painting in the cave church of Corbii de Piatra Hermitage under the influence of meteoric infiltration water and environmental factors. The medieval fresco dates from the end of the 13th century and the beginning of the 14th century, being painted on a sandstone wall. The infiltration of meteoric water through this wall, the temperature variations, the environment and the repeated wetting/drying processes determined the degradation of the fresco, resulting in its detachment from large surfaces. This research established correlations between the processes that take place, the structural transformations, the changes in composition and the adhesion of the fresco to the sandstone wall. The results have been made available to conservation and restoration specialists, in order to choose appropriate materials and technologies. This paper presents findings regarding the pictorial material and introduces new analysis techniques in research on the degradation processes of the fresco painting in the cave church of Corbii de Piatra Hermitage under the influence of meteoric infiltration water and environmental factors.
RESUMO
Zircaloy-4 has an important role in the construction of generation III nuclear reactors. An important application is the fuel element sheath, which must have excellent corrosion resistance in the working environment, adequate mechanical characteristics and very good heat transfer properties from the combustible element to the coolant. The corrosion processes at high temperatures, the accidents that lead to significant increases in temperature and the structural transformations associated with them affect the heat transfer process. The paper presents research on the influence of high temperatures on the microstructure and thermal diffusivity of the zy-4 alloy. The samples were treated in air, at temperatures between 850 and 1050 °C for 60 min. The corrosion layers were characterized microstructurally and chemically. Furthermore, the transformations produced in the base material under the corrosion layer were analyzed. The values of thermal diffusivity were determined and correlated with the structural transformations. Considering the state of research on the materials appropriate to be used for new generation reactors, the current importance of third-generation reactors for energy systems and the fact that they will operate in the coming years, we consider that the study offers useful outcomes in the field of nuclear energy.
RESUMO
Combined analysis methods such as optical microscopy (OM), cathodoluminescence (CL) microscopy, X-ray diffraction (XRD), and scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDX) have made it possible to obtain the first physico-chemical data of Dacian potsherds, exhumed at the archeological site of OcniÈa-Buridava, Romania; the samples were provided by the "Aurelian SacerdoÈeanu" County Museum Vâlcea, dating from the 2nd century BC to the 1st century AD. The mineralogical and petrographic analyses revealed two types of ceramic pastes, taking into account the granulometry of the inclusions and highlighting the choice of the potter for fabricating the ceramic either by wheel or by hand. All samples showed an abundance in quartz, mica (muscovite and biotite), and feldspars. These observations were confirmed by cathodoluminescence imagery, revealing heterogeneous pastes with varied granulometric distributions. The XRD patterns indicated the presence of the mineral phases, indicating a firing temperature below 900 °C. The wheel-made ceramics have a fine, compact matrix with very fine inclusions (<40 µm). On the other hand, the hand-made ceramics present a coarse matrix, with inclusions whose granulometry reaches approximately 2 mm. The difference between these two types of ceramics is also confirmed by the mineralogical and chemical analysis. The wheel-made potsherds are more abundant in MgO, Al2O3, and CaO contents.