Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 18 de 18
Filtrar
1.
Spine Deform ; 7(3): 436-444, 2019 05.
Artigo em Inglês | MEDLINE | ID: mdl-31053314

RESUMO

STUDY DESIGN: Retrospective cohort study. OBJECTIVES: This study investigated how anterior chest wall deformity is affected by thoracoscopic anterior scoliosis fusion (TASF) surgery in adolescent idiopathic scoliosis patients. We aimed to determine correlations pre- and postoperatively with other clinical and radiological scoliosis measures. BACKGROUND DATA: Scoliosis surgery aims to halt progression of the deformity, and to reduce its severity. Currently, deformity correction is clinically measured in terms of Cobb angle and rib hump (RH); however, a significant cosmetic concern for patients is anterior chest wall deformity. METHODS: Pre- and postoperative CT scans of 28 female, Lenke type 1 patients with a mean preoperative Cobb angle of 50.2° ± 7.1° were retrieved from the Research Group's surgical database. Using ImageJ, 3D reconstructions of the thorax were created. Two observers measured the anterior chest wall deformity as a chest wall angle (CWA) and posterior deformity as a posterior apical deformity angle (PDA). We investigated pre- to postoperative changes in CWA, PDA, RH, and Cobb angle as well as their interrelationship. RESULTS: All deformity parameters (Cobb angle, RH, CWA, and PDA) showed statistically significant improvement post TASF. Correlation was found between RH and Cobb angle pre- and postoperatively, Cobb angle and CWA preoperatively and between postoperative change in Cobb angle and CWA. No relationship was found between CWA and RH or PDA. CONCLUSIONS: Anterior chest wall deformity is independent from the posterior chest wall measures RH and PDA, indicating that the anterior chest wall deformity is not reflected in the posterior rib cage. The correlation between Cobb angle and CWA indicates that the deformity in the spine and the deformity in the ribs are related, and shows that the anterior chest wall deformity is improved post thoracoscopic anterior scoliosis fusion surgery as the lateral deviation of the spine is corrected. LEVEL OF EVIDENCE: Level III.


Assuntos
Procedimentos Ortopédicos/métodos , Escoliose/cirurgia , Parede Torácica/cirurgia , Toracoscopia/métodos , Adolescente , Adulto , Criança , Humanos , Procedimentos Ortopédicos/efeitos adversos , Satisfação do Paciente , Complicações Pós-Operatórias , Estudos Retrospectivos , Escoliose/patologia , Parede Torácica/patologia , Toracoscopia/efeitos adversos , Resultado do Tratamento , Adulto Jovem
2.
J Mech Behav Biomed Mater ; 69: 420-434, 2017 05.
Artigo em Inglês | MEDLINE | ID: mdl-28262607

RESUMO

Many experimental testing techniques have been adopted in order to provide an understanding of the biomechanics of the human intervertebral disc (IVD). The aim of this review article is to amalgamate results from these studies to provide readers with an overview of the studies conducted and their contribution to our current understanding of the biomechanics and function of the IVD. The overview is presented in a way that should prove useful to experimentalists and computational modellers. Mechanical properties of whole IVDs can be assessed conveniently by testing 'motion segments' comprising two vertebrae and the intervening IVD and ligaments. Neural arches should be removed if load-sharing between them and the disc is of no interest, and specimens containing more than two vertebrae are required to study 'adjacent level' effects. Mechanisms of injury (including endplate fracture and disc herniation) have been studied by applying complex loading at physiologically-relevant loading rates, whereas mechanical evaluations of surgical prostheses require slower application of standardised loading protocols. Results can be strongly influenced by the testing environment, preconditioning, loading rate, specimen age and degeneration, and spinal level. Component tissues of the disc (anulus fibrosus, nucleus pulposus, and cartilage endplates) have been studied to determine their material properties, but only the anulus has been thoroughly evaluated. Animal discs can be used as a model of human discs where uniform non-degenerate specimens are required, although differences in scale, age, and anatomy can lead to problems in interpretation.


Assuntos
Disco Intervertebral/fisiologia , Animais , Anel Fibroso/fisiologia , Fenômenos Biomecânicos , Cartilagem/fisiologia , Humanos , Núcleo Pulposo/fisiologia
3.
Clin Biomech (Bristol, Avon) ; 40: 68-73, 2016 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-27825053

RESUMO

BACKGROUND: Spinal instrumentation and fusion for the treatment of scoliosis is primarily a mechanical intervention to correct the deformity and halt further progression. While implant-related complications remain a concern, little is known about the magnitudes of the forces applied to the spine during surgery, which may affect post-surgical outcomes. In this study, the compressive forces applied to each spinal segment during anterior instrumentation were measured in a series of patients with Adolescent Idiopathic Scoliosis. METHODS: A force transducer was designed and retrofit to a routinely used surgical tool, and compressive forces applied to each segment during surgery were measured for 15 scoliosis patients. Cobb angle correction achieved by each force was measured on intra-operative fluoroscope images. Relative changes in orientation of the screw within the vertebra were also measured to detect intra-operative screw plough. FINDINGS: Intra-operative forces were measured for a total of 95 spinal segments. The mean applied compressive force was 540N (SD 230N, range 88N-1019N). There was a clear trend for higher forces to be applied at segments toward the apex of the scoliosis. Fluoroscopic evidence of screw plough was detected at 10 segments (10.5%). INTERPRETATION: The magnitude of forces applied during anterior scoliosis correction vary over a broad range. These forces do reach magnitudes capable of causing intra-operative vertebral body screw plough. Surgeons should be aware there is a risk for tissue overload during correction, however the clinical implications of intra-operative screw plough remain unclear. The dataset presented here is valuable for providing realistic input parameters for in silico surgical simulations.


Assuntos
Escoliose/cirurgia , Fusão Vertebral/métodos , Estresse Mecânico , Suporte de Carga/fisiologia , Adolescente , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Período Perioperatório , Complicações Pós-Operatórias/prevenção & controle , Escoliose/fisiopatologia , Fusão Vertebral/efeitos adversos , Coluna Vertebral/fisiopatologia , Coluna Vertebral/cirurgia , Vértebras Torácicas/cirurgia
4.
Clin Biomech (Bristol, Avon) ; 32: 220-8, 2016 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-26658078

RESUMO

BACKGROUND: Segmental biomechanics of the scoliotic spine are important since the overall spinal deformity is comprised of the cumulative coronal and axial rotations of individual joints. This study investigates the coronal plane segmental biomechanics for adolescent idiopathic scoliosis patients in response to physiologically relevant axial compression. METHODS: Individual spinal joint compliance in the coronal plane was measured for a series of 15 idiopathic scoliosis patients using axially loaded magnetic resonance imaging. Each patient was first imaged in the supine position with no axial load, and then again following application of an axial compressive load. Coronal plane disc wedge angles in the unloaded and loaded configurations were measured. Joint moments exerted by the axial compressive load were used to derive estimates of individual joint compliance. FINDINGS: The mean standing major Cobb angle for this patient series was 46°. Mean intra-observer measurement error for endplate inclination was 1.6°. Following loading, initially highly wedged discs demonstrated a smaller change in wedge angle, than less wedged discs for certain spinal levels (+2,+1,-2 relative to the apex, (p<0.05)). Highly wedged discs were observed near the apex of the curve, which corresponded to lower joint compliance in the apical region. INTERPRETATION: While individual patients exhibit substantial variability in disc wedge angles and joint compliance, overall there is a pattern of increased disc wedging near the curve apex, and reduced joint compliance in this region. Approaches such as this can provide valuable biomechanical data on in vivo spinal biomechanics of the scoliotic spine, for analysis of deformity progression and surgical planning.


Assuntos
Disco Intervertebral/fisiopatologia , Escoliose/fisiopatologia , Vértebras Torácicas/fisiopatologia , Suporte de Carga/fisiologia , Adolescente , Fenômenos Biomecânicos , Complacência (Medida de Distensibilidade)/fisiologia , Progressão da Doença , Feminino , Humanos , Imageamento por Ressonância Magnética/métodos , Masculino , Estresse Mecânico
5.
Clin Biomech (Bristol, Avon) ; 30(1): 33-9, 2015 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-25487998

RESUMO

BACKGROUND: The use of dual growing rods is a fusionless surgical approach to the treatment of early onset scoliosis which aims to harness potential growth and correct spinal deformity. The purpose of this study was to compare the in-vitro biomechanical response of two different dual rod designs under axial rotation loading. METHODS: Six porcine spines were dissected into seven level thoracolumbar multi-segment units. Each specimen was mounted and tested in a biaxial Instron machine, undergoing nondestructive left and right axial rotation to peak moments of 4 Nm at a constant rotation rate of 8 deg. s(-1). A motion tracking system (Optotrak) measured 3D displacements of individual vertebrae. Each spine was tested in an un-instrumented state first and then with appropriately sized semi-constrained and 'rigid' growing rods in alternating sequence. The range of motion, neutral zone size and stiffness were calculated from the moment-rotation curves and intervertebral range of motion was calculated from Optotrak data. FINDINGS: Irrespective of test sequence, rigid rods showed a significant reduction of total rotation across all instrumented levels (with increased stiffness) whilst semi-constrained rods exhibited similar rotational behavior to the un-instrumented spines (P<0.05). An 11.1% and 8.0% increase in stiffness for left and right axial rotation respectively and 14.9% reduction in total range of motion were recorded with dual rigid rods compared with semi-constrained rods. INTERPRETATION: Based on these findings, the Semi-constrained growing rods were shown to not increase axial rotation stiffness compared with un-instrumented spines. This is thought to provide a more physiological environment for the growing spine compared to dual rigid rod constructs.


Assuntos
Fixadores Internos , Escoliose/fisiopatologia , Escoliose/cirurgia , Coluna Vertebral/fisiologia , Coluna Vertebral/cirurgia , Animais , Fenômenos Biomecânicos , Modelos Animais de Doenças , Desenho de Equipamento , Humanos , Técnicas In Vitro , Movimento , Procedimentos Ortopédicos , Rotação , Suínos , Suporte de Carga
6.
Artigo em Inglês | MEDLINE | ID: mdl-24261987

RESUMO

Software to create individualised finite element (FE) models of the osseoligamentous spine using pre-operative computed tomography (CT) data-sets for spinal surgery patients has recently been developed. This study presents a geometric sensitivity analysis of this software to assess the effect of intra-observer variability in user-selected anatomical landmarks. User-selected landmarks on the osseous anatomy were defined from CT data-sets for three scoliosis patients and these landmarks were used to reconstruct patient-specific anatomy of the spine and ribcage using parametric descriptions. The intra-observer errors in landmark co-ordinates for these anatomical landmarks were calculated. FE models of the spine and ribcage were created using the reconstructed anatomy for each patient and these models were analysed for a loadcase simulating clinical flexibility assessment. The intra-observer error in the anatomical measurements was low in comparison to the initial dimensions, with the exception of the angular measurements for disc wedge and zygapophyseal joint (z-joint) orientation and disc height. This variability suggested that CT resolution may influence such angular measurements, particularly for small anatomical features, such as the z-joints, and may also affect disc height. The results of the FE analysis showed low variation in the model predictions for spinal curvature with the mean intra-observer variability substantially less than the accepted error in clinical measurement. These findings demonstrate that intra-observer variability in landmark point selection has minimal effect on the subsequent FE predictions for a clinical loadcase.


Assuntos
Modelagem Computacional Específica para o Paciente , Escoliose/fisiopatologia , Tomografia Computadorizada por Raios X , Adulto , Fenômenos Biomecânicos , Osso e Ossos/anatomia & histologia , Simulação por Computador , Análise de Elementos Finitos , Humanos , Processamento de Imagem Assistida por Computador , Imageamento Tridimensional , Pessoa de Meia-Idade , Modelos Anatômicos , Variações Dependentes do Observador , Escoliose/diagnóstico por imagem , Software , Coluna Vertebral/anatomia & histologia
7.
J Biomech ; 47(8): 1757-66, 2014 Jun 03.
Artigo em Inglês | MEDLINE | ID: mdl-24767702

RESUMO

Finite element (FE) model studies have made important contributions to our understanding of functional biomechanics of the lumbar spine. However, if a model is used to answer clinical and biomechanical questions over a certain population, their inherently large inter-subject variability has to be considered. Current FE model studies, however, generally account only for a single distinct spinal geometry with one set of material properties. This raises questions concerning their predictive power, their range of results and on their agreement with in vitro and in vivo values. Eight well-established FE models of the lumbar spine (L1-5) of different research centers around the globe were subjected to pure and combined loading modes and compared to in vitro and in vivo measurements for intervertebral rotations, disc pressures and facet joint forces. Under pure moment loading, the predicted L1-5 rotations of almost all models fell within the reported in vitro ranges, and their median values differed on average by only 2° for flexion-extension, 1° for lateral bending and 5° for axial rotation. Predicted median facet joint forces and disc pressures were also in good agreement with published median in vitro values. However, the ranges of predictions were larger and exceeded those reported in vitro, especially for the facet joint forces. For all combined loading modes, except for flexion, predicted median segmental intervertebral rotations and disc pressures were in good agreement with measured in vivo values. In light of high inter-subject variability, the generalization of results of a single model to a population remains a concern. This study demonstrated that the pooled median of individual model results, similar to a probabilistic approach, can be used as an improved predictive tool in order to estimate the response of the lumbar spine.


Assuntos
Análise de Elementos Finitos , Vértebras Lombares/fisiologia , Modelos Teóricos , Algoritmos , Força Compressiva , Humanos , Vértebras Lombares/anatomia & histologia , Postura , Pressão , Probabilidade , Amplitude de Movimento Articular/fisiologia , Reprodutibilidade dos Testes , Rotação , Articulação Zigapofisária/fisiologia
8.
Clin Biomech (Bristol, Avon) ; 27(5): 415-21, 2012 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-22226470

RESUMO

BACKGROUND: Adolescent idiopathic scoliosis is a complex three-dimensional deformity, involving a lateral deformity in the coronal plane and axial rotation of the vertebrae in the transverse plane. Gravitational loading plays an important biomechanical role in governing the coronal deformity, however, less is known about how they influence the axial deformity. This study investigates the change in three-dimensional deformity of a series of scoliosis patients due to compressive axial loading. METHODS: Magnetic resonance imaging scans were obtained and coronal deformity (measured using the coronal Cobb angle) and axial rotations measured for a group of 18 scoliosis patients (Mean major Cobb angle was 43.4°). Each patient was scanned in an unloaded and loaded condition while compressive loads equivalent to 50% body mass were applied using a custom developed compressive device. FINDINGS: The mean increase in major Cobb angle due to compressive loading was 7.4° (SD 3.5°). The most axially rotated vertebra was observed at the apex of the structural curve and the largest average intravertebral rotations were observed toward the limits of the coronal deformity. A level-wise comparison showed no significant difference between the average loaded and unloaded vertebral axial rotations (intra-observer error=2.56°) or intravertebral rotations at each spinal level. INTERPRETATION: This study suggests that the biomechanical effects of axial loading primarily influence the coronal deformity, with no significant change in vertebral axial rotation or intravertebral rotation observed between the unloaded and loaded condition. However, the magnitude of changes in vertebral rotation with compressive loading may have been too small to detect given the resolution of the current technique.


Assuntos
Imageamento Tridimensional , Imageamento por Ressonância Magnética/métodos , Escoliose/patologia , Escoliose/fisiopatologia , Coluna Vertebral/patologia , Coluna Vertebral/fisiopatologia , Suporte de Carga , Adolescente , Criança , Força Compressiva , Simulação por Computador , Feminino , Humanos , Interpretação de Imagem Assistida por Computador/métodos , Masculino , Modelos Biológicos , Reprodutibilidade dos Testes , Sensibilidade e Especificidade
9.
J Mech Behav Biomed Mater ; 4(7): 1554-8, 2011 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-21783165

RESUMO

Nanoindentation is a useful technique for probing the mechanical properties of bone, and finite element (FE) modeling of the indentation allows inverse determination of elastoplastic constitutive properties. However, all but one FE study to date have assumed frictionless contact between indenter and bone. The aim of this study was to explore the effect of friction in simulations of bone nanoindentation. Two-dimensional axisymmetric FE simulations were performed using a spheroconical indenter of tip radius 0.6 µm and angle 90°. The coefficient of friction between indenter and bone was varied between 0.0 (frictionless) and 0.3. Isotropic linear elasticity was used in all simulations, with bone elastic modulus E = 13.56 GPa and Poisson's ratio of 0.3. Plasticity was incorporated using both Drucker-Prager and von Mises yield surfaces. Friction had a modest effect on the predicted force-indentation curve for both von Mises and Drucker-Prager plasticity, reducing maximum indenter displacement by 10% and 20% respectively as friction coefficient was increased from zero to 0.3 (at a maximum indenter force of 5 mN). However, friction has a much greater effect on predicted pile-up after indentation, reducing predicted pile-up from 0.27 to 0.11 µm with a von Mises model, and from 0.09 to 0.02 µm with Drucker-Prager plasticity. We conclude that it is potentially important to include friction in nanoindentation simulations of bone if pile-up is used to compare simulation results with experiment.


Assuntos
Osso e Ossos , Análise de Elementos Finitos , Fricção , Teste de Materiais/métodos , Nanotecnologia/métodos , Fenômenos Biomecânicos , Resistência ao Cisalhamento
10.
Clin Biomech (Bristol, Avon) ; 26(9): 895-903, 2011 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-21652127

RESUMO

BACKGROUND: In vitro investigations have demonstrated the importance of the ribcage in stabilizing the thoracic spine. Surgical alterations of the ribcage may change load-sharing patterns in the thoracic spine. Computer models are used in this study to explore the effect of surgical disruption of the rib-vertebrae connections on ligament load-sharing in the thoracic spine. METHODS: A finite element model of a T7-8 motion segment, including the T8 rib, was developed using CT-derived spinal anatomy for the Visible Woman. Both the intact motion segment and the motion segment with four successive stages of destabilization (discectomy and removal of right costovertebral joint, right costotransverse joint and left costovertebral joint) were analyzed for a 2000 Nmm moment in flexion/extension, lateral bending and axial rotation. Joint rotational moments were compared with existing in vitro data and a detailed investigation of the load sharing between the posterior ligaments carried out. FINDINGS: The simulated motion segment demonstrated acceptable agreement with in vitro data at all stages of destabilization. Under lateral bending and axial rotation, the costovertebral joints were of critical importance in resisting applied moments. In comparison to the intact joint, anterior destabilization increases the total moment contributed by the posterior ligaments. INTERPRETATION: Surgical removal of the costovertebral joints may lead to excessive rotational motion in a spinal joint, increasing the risk of overload and damage to the remaining ligaments. The findings of this study are particularly relevant for surgical procedures involving rib head resection, such as some techniques for scoliosis deformity correction.


Assuntos
Articulações/cirurgia , Ligamentos/cirurgia , Vértebras Torácicas/cirurgia , Fenômenos Biomecânicos , Simulação por Computador , Discotomia/métodos , Elasticidade , Feminino , Análise de Elementos Finitos , Humanos , Movimento (Física) , Costelas/anatomia & histologia , Tomografia Computadorizada por Raios X/métodos , Projetos Ser Humano Visível , Suporte de Carga
11.
Clin Biomech (Bristol, Avon) ; 26(5): 445-51, 2011 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-21316129

RESUMO

BACKGROUND: Fusionless scoliosis surgery is an early-stage treatment for idiopathic scoliosis which claims potential advantages over current fusion-based surgical procedures. Anterior vertebral stapling using a shape memory alloy staple is one such approach. Despite increasing interest in this technique, little is known about the effects on the spine following insertion, or the mechanism of action of the staple. The purpose of this study was to investigate the biomechanical consequences of staple insertion in the anterior thoracic spine, using in vitro experiments on an immature bovine model. METHODS: Individual calf spine thoracic motion segments were tested in flexion, extension, lateral bending and axial rotation. Changes in motion segment rotational stiffness following staple insertion were measured on a series of 14 specimens. Strain gauges were attached to three of the staples in the series to measure forces transmitted through the staple during loading. A micro-CT scan of a single specimen was performed after loading to qualitatively examine damage to the vertebral bone caused by the staple. FINDINGS: Small but statistically significant decreases in bending stiffness (P<0.05) occurred in flexion, extension, lateral bending away from the staple, and axial rotation away from the staple. Each strain-gauged staple showed a baseline compressive loading following insertion which was seen to gradually decrease during testing. Post-test micro-CT showed substantial bone and growth plate damage near the staple. INTERPRETATION: Based on our findings it is possible that growth modulation following staple insertion is due to tissue damage rather than sustained mechanical compression of the motion segment.


Assuntos
Amplitude de Movimento Articular , Fusão Vertebral/instrumentação , Suturas , Vértebras Torácicas/fisiopatologia , Vértebras Torácicas/cirurgia , Animais , Bovinos , Módulo de Elasticidade , Desenho de Equipamento , Análise de Falha de Equipamento , Fusão Vertebral/métodos , Estresse Mecânico
12.
J Mech Behav Biomed Mater ; 3(2): 146-57, 2010 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-20129414

RESUMO

Analytical and computational models of the intervertebral disc (IVD) are commonly employed to enhance understanding of the biomechanics of the human spine and spinal motion segments. The accuracy of these models in predicting physiological behaviour of the spine is intrinsically reliant on the accuracy of the material constitutive representations employed to represent the spinal tissues. There is a paucity of detailed mechanical data describing the material response of the reinforced-ground matrix in the anulus fibrosus of the IVD. In the present study, the 'reinforced-ground matrix' was defined as the matrix with the collagen fibres embedded but not actively bearing axial load, thus incorporating the contribution of the fibre-fibre and fibre-matrix interactions. To determine mechanical parameters for the anulus ground matrix, mechanical tests were carried out on specimens of ovine anulus, under unconfined uniaxial compression, simple shear and biaxial compression. Test specimens of ovine anulus fibrosus were obtained with an adjacent layer of vertebral bone/cartilage on the superior and inferior specimen surface. Specimen geometry was such that there were no continuous collagen fibres coupling the two endplates. Samples were subdivided according to disc region - anterior, lateral and posterior - to determine the regional inhomogeneity in the anulus mechanical response. Specimens were loaded at a strain rate sufficient to avoid fluid outflow from the tissue and typical stress-strain responses under the initial load application and under repeated loading were determined for each of the three loading types. The response of the anulus tissue to the initial and repeated load cycles was significantly different for all load types, except biaxial compression in the anterior anulus. Since the maximum applied strain exceeded the damage strain for the tissue, experimental results for repeated loading reflected the mechanical ability of the tissue to carry load, subsequent to the initiation of damage. To our knowledge, this is the first study to provide experimental data describing the response of the 'reinforced-ground matrix' to biaxial compression. Additionally, it is novel in defining a study objective to determine the regionally inhomogeneous response of the 'reinforced-ground matrix' under an extensive range of loading conditions suitable for mechanical characterisation of the tissue. The results presented facilitate the development of more detailed and comprehensive constitutive descriptions for the large strain nonlinear elastic or hyperelastic response of the anulus ground matrix.


Assuntos
Disco Intervertebral/fisiologia , Animais , Fenômenos Biomecânicos , Cartilagem/fisiologia , Colágeno/metabolismo , Elasticidade , Técnicas In Vitro , Vértebras Lombares/fisiologia , Dinâmica não Linear , Resistência ao Cisalhamento , Ovinos
13.
J Mech Behav Biomed Mater ; 2(3): 305-9, 2009 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-19627835

RESUMO

Biological tissues are subjected to complex loading states in vivo and in order to define constitutive equations that effectively simulate their mechanical behaviour under these loads, it is necessary to obtain data on the tissue's response to multiaxial loading. Single axis and shear testing of biological tissues is often carried out, but biaxial testing is less common. We sought to design and commission a biaxial compression testing device, capable of obtaining repeatable data for biological samples. The apparatus comprised a sealed stainless steel pressure vessel specifically designed such that a state of hydrostatic compression could be created on the test specimen while simultaneously unloading the sample along one axis with an equilibrating tensile pressure. Thus a state of equibiaxial compression was created perpendicular to the long axis of a rectangular sample. For the purpose of calibration and commissioning of the vessel, rectangular samples of closed cell ethylene vinyl acetate (EVA) foam were tested. Each sample was subjected to repeated loading, and nine separate biaxial experiments were carried out to a maximum pressure of 204 kPa (30 psi), with a relaxation time of two hours between them. Calibration testing demonstrated the force applied to the samples had a maximum error of 0.026 N (0.423% of maximum applied force). Under repeated loading, the foam sample demonstrated lower stiffness during the first load cycle. Following this cycle, an increased stiffness, repeatable response was observed with successive loading. While the experimental protocol was developed for EVA foam, preliminary results on this material suggest that this device may be capable of providing test data for biological tissue samples. The load response of the foam was characteristic of closed cell foams, with consolidation during the early loading cycles, then a repeatable load-displacement response upon repeated loading. The repeatability of the test results demonstrated the ability of the test device to provide reproducible test data and the low experimental error in the force demonstrated the reliability of the test data.


Assuntos
Biotecnologia/instrumentação , Polivinil , Estresse Mecânico , Biotecnologia/métodos , Calibragem , Elasticidade , Desenho de Equipamento , Teste de Materiais/instrumentação , Teste de Materiais/métodos , Pressão , Aço Inoxidável
14.
Comput Methods Biomech Biomed Engin ; 11(1): 95-103, 2008 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-17943481

RESUMO

Prior studies have found that primary rotations in the lumbar spine are accompanied by coupled out-of-plane rotations. However, it is not clear whether these accompanying rotations are primarily due to passive (discs, ligaments and facet joints) or active (muscles) spinal anatomy. The aim of this study was to use a finite element (FE) model of the lumbar spine to predict three-dimensional coupled rotations between the lumbar vertebrae, due to passive spinal structures alone. The FE model was subjected to physiologically observed whole lumbar spine rotations about in vivo centres of rotation. Model predictions were validated by comparison of intra-discal pressures and primary rotations with in vivo measurements and these showed close agreement. Predicted coupled rotations matched in vivo measurements for all primary motions except lateral bending. We suggest that coupled rotations accompanying primary motions in the sagittal (flexion/extension) and transverse (axial rotation) planes are primarily due to passive spinal structures. For lateral bending the muscles most likely play a key role in the coupled rotation of the spine.


Assuntos
Ligamentos/anatomia & histologia , Ligamentos/fisiologia , Vértebras Lombares/anatomia & histologia , Vértebras Lombares/fisiologia , Modelos Biológicos , Coluna Vertebral/anatomia & histologia , Coluna Vertebral/fisiologia , Fenômenos Biomecânicos , Simulação por Computador , Análise de Elementos Finitos , Humanos , Modelos Anatômicos , Rotação
15.
J Biomech ; 40(12): 2744-51, 2007.
Artigo em Inglês | MEDLINE | ID: mdl-17383659

RESUMO

Degenerate intervertebral discs exhibit both material and structural changes. Structural defects (lesions) develop in the anulus fibrosus with age. While degeneration has been simulated in numerous previous studies, the effects of structural lesions on disc mechanics are not well known. In this study, a finite element model (FEM) of the L4/5 intervertebral disc was developed in order to study the effects of anular lesions and loss of hydrostatic pressure in the nucleus pulposus on the disc mechanics. Models were developed to simulate both healthy and degenerate discs. Degeneration was simulated with either rim, radial or circumferential anular lesions and by equating nucleus pressure to zero. The anulus fibrosus ground substance was represented as a nonlinear incompressible material using a second-order polynomial, hyperelastic strain energy equation. Hyperelastic material parameters were derived from experimentation on sheep discs. Endplates were assumed to be rigid, and annulus lamellae were assumed to be vertical in the unloaded state. Loading conditions corresponding to physiological ranges of rotational motion were applied to the models and peak rotation moments compared between models. Loss of nucleus pulposus pressure had a much greater effect on the disc mechanics than the presence of anular lesions. This indicated that the development of anular lesions alone (prior to degeneration of the nucleus) has minimal effect on disc mechanics, but that disc stiffness is significantly reduced by the loss of hydrostatic pressure in the nucleus. With the degeneration of the nucleus, the outer innervated anulus or surrounding osteo-ligamentous anatomy may therefore experience increased strains.


Assuntos
Disco Intervertebral/fisiopatologia , Região Lombossacral/fisiopatologia , Modelos Biológicos , Doenças da Medula Espinal/fisiopatologia , Animais , Análise de Elementos Finitos , Disco Intervertebral/patologia , Região Lombossacral/patologia , Ovinos , Doenças da Medula Espinal/patologia , Estresse Mecânico , Suporte de Carga
16.
Urologe A ; 45(12): 1509-13, 2006 Dec.
Artigo em Alemão | MEDLINE | ID: mdl-17089142

RESUMO

Genital herpes simplex virus (HSV-1 and HSV-2) infection is an ulcerative, lifelong, recurring sexually transmitted disease of increasing epidemiologic worldwide importance. Transmission occurs by close skin contact, usually during asymptomatic virus shedding. The virus persists in the dorsal root ganglion where it is not accessible to the host's immune system. The most important risk factor is a person's number of lifetime sex partners. The more extensive first-episode infection is followed by milder recurrences. Recurrence rates differ greatly. The diagnosis is made clinically, microbiologically, and serologically. There are several virostatic agents available for treatment.


Assuntos
Herpes Genital/diagnóstico , Herpes Genital/terapia , Feminino , Humanos , Masculino , Guias de Prática Clínica como Assunto , Padrões de Prática Médica , Prevenção Secundária
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA