Advantages of model averaging of species sensitivity distributions used for regulating produced water discharges.

Produced water (PW) generated by Australian offshore oil and gas activities is typically discharged to the ocean after treatment. These complex mixtures of organic and inorganic compounds can pose significant environmental risk to receiving waters, if not managed appropriately. Oil and gas operators in Australia are required to demonstrate that environmental impacts of their activity are managed to levels that are as low as reasonably practicable, for example, through risk assessments comparing predicted no-effect concentrations (PNECs) with predicted environmental concentrations of PW. Probabilistic species sensitivity distribution (SSD) approaches are increasingly being used to derive PW PNECs and subsequently calculating dilutions of PW (termed "safe" dilutions) required to protect a nominated percentage of species in the receiving environment (e.g., 95% and 99% or PC95 and PC99, respectively). Limitations associated with SSDs include fitting a single model to small (six to eight species) data sets, resulting in large uncertainty (very wide 95% confidence limits) in the region associated with PC99 and PC95 results. Recent advances in SSD methodology, in the form of model averaging, claim to overcome some of these limitations by applying the average model fit of multiple models to a data set. We assessed the advantages and limitations of four different SSD software packages for determining PNECs for five PWs from a gas and condensate platform off the North West Shelf of Australia. Model averaging reduced occurrences of extreme uncertainty around PC95 and PC99 values compared with single model fitting and was less prone to the derivation of overly conservative PC99 and PC95 values that resulted from lack of fit to single models. Our results support the use of model averaging for improved robustness in derived PNEC and subsequent "safe" dilution values for PW discharge management and risk assessment. In addition, we present and discuss the toxicity of PW considering the paucity of such information in peer-reviewed literature. Integr Environ Assess Manag 2024;20:498-517. © 2023 Commonwealth Scientific and Industrial Research Organisation. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Acute and chronic toxicity of manganese to tropical adult coral (Acropora millepora) to support the derivation of marine manganese water quality guideline values.

Adult corals are among the most sensitive marine organisms to dissolved manganese and experience tissue sloughing without bleaching (i.e., no loss of Symbiodinium spp.) but there are no chronic toxicity data for this sensitive endpoint. We exposed adult Acropora millepora to manganese in 2-d acute and 14-d chronic experiments using tissue sloughing as the toxicity endpoint. The acute tissue sloughing median effect concentration (EC50) was 2560 µg Mn/L. There was no chronic toxicity to A. millepora at concentrations up to and including the highest concentration of 1090 µg Mn/L i.e., the chronic no observed effect concentration (NOEC). A coral-specific acute-to-chronic ratio (ACR) (EC50/NOEC) of 2.3 was derived. These data were combined with chronic toxicity data for other marine organisms in a species sensitivity distribution (SSD). Marine manganese guidelines were 190, 300, 390 and 570 µg Mn/L to provide long-term protection of 99, 95, 90, and 80 % of marine species, respectively.

High Sensitivity of the Antarctic Rotifer Adineta editae to Metals and Ecological Relevance in Contaminated Site Risk Assessments.

Anthropogenic activities in Antarctica have led to contamination of terrestrial sites, and soils in ice-free areas have elevated concentrations of metals, particularly around current and historic research stations. Effective management of Antarctic contaminated sites depends on the assessment of risks to a representative range of native terrestrial species. Bdelloid rotifers are an abundant and biodiverse component of Antarctic limnoterrestrial communities and play a key role in nutrient cycling in Antarctic ecosystems. The present study investigates the toxicity of five metals (cadmium, copper, nickel, lead, and zinc) to the endemic bdelloid rotifer Adineta editae, both singly and in metal mixtures. Based on the concentrations tested, zinc was the most toxic metal to survival with a 7-day median lethal concentration (LC50) of 344 µg Zn/L, followed by cadmium with a 7-day LC50 of 1542 µg Cd/L. Rotifers showed high sensitivity using cryptobiosis (chemobiosis) as a sublethal behavioral endpoint. Chemobiosis was triggered in A. editae at low metal concentrations (e.g., 6 µg/L Pb) and is likely a protective mechanism and survival strategy to minimize exposure to stressful conditions. Lead and copper were most toxic to rotifer behavior, with 4-day median effect concentrations (EC50s) of 18 and 27 µg/L, respectively, followed by zinc and cadmium (4-day EC50 values of 52 and 245 µg/L, respectively). The response of rotifers to the metal mixtures was antagonistic, with less toxicity observed than was predicted by the model developed from the single-metal exposure data. The present study provides evidence that this bdelloid rotifer represents a relatively sensitive microinvertebrate species to metals and is recommended for use in contaminant risk assessments in Antarctica. Environ Toxicol Chem 2023;42:1409-1419. © 2023 SETAC.

The Effects of Nickel and Copper on Tropical Marine and Freshwater Microalgae Using Single and Multispecies Tests.

Microalgae are key components of aquatic food chains and are known to be sensitive to a range of contaminants. Much of the available data on metal toxicity to microalgae have been derived from temperate single-species tests with temperate data used to supplement tropical toxicity data sets to derive guideline values. In the present study, we used single-species and multispecies tests to investigate the toxicity of nickel and copper to tropical freshwater and marine microalgae, including the free-swimming stage of Symbiodinium sp., a worldwide coral endosymbiont. Based on the 10% effect concentration (EC10) for growth rate, copper was two to four times more toxic than nickel to all species tested. The temperate strain of Ceratoneis closterium was eight to 10 times more sensitive to nickel than the two tropical strains. Freshwater Monoraphidium arcuatum was less sensitive to copper and nickel in the multispecies tests compared with the single-species tests (EC10 values increasing from 0.45 to 1.4 µg Cu/L and from 62 to 330 µg Ni/L). The Symbiodinium sp. was sensitive to copper (EC10 of 3.1 µg Cu/L) and less sensitive to nickel (EC50 >1600 µg Ni/L). This is an important contribution of data on the chronic toxicity of nickel to Symbiodinium sp. A key result from the present study was that three microalgal species had EC10 values below the current copper water quality guideline value for 95% species protection in slightly to moderately disturbed systems in Australia and New Zealand, indicating that they may not be adequately protected by the current copper guideline value. By contrast, toxicity of nickel to microalgae is unlikely to occur at exposure concentrations typically found in fresh and marine waters. Environ Toxicol Chem 2023;42:901-913. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The Influence of Oil-in-Water Preparations on the Toxicity of Crude Oil to Marine Invertebrates and Fish Following Short-Term Pulse and Continuous Exposures.

Following an oil spill, accurate assessments of the ecological risks of exposure to compounds within petroleum are required, as is knowledge regarding how those risks may change with the use of chemical dispersants. Laboratory toxicity tests are frequently used to assess these risks, but differences in the methods for preparation of oil-in-water solutions may confound interpretation, as may differences in exposure time to those solutions. In the present study, we used recently developed modifications of standardized ecotoxicity tests with copepods (Acartia sinjiensis), sea urchins (Heliocidaris tuberculata), and fish embryos (Seriola lalandi) to assess their response to crude oil solutions and assessed whether the oil-in-water preparation method changed the results. We created a water-accommodated fraction, a chemically enhanced water-accommodated fraction, and a high-energy water-accommodated fraction (HEWAF) using standard approaches using two different dispersants, Corexit 9500 and Slickgone NS. We found that toxicity was best related to total polycyclic aromatic hydrocarbon (TPAH) concentrations in solution, regardless of the preparation method used, and that the HEWAF was the most toxic because it dispersed the highest quantity of oil into solution. The TPAH composition in water did not vary appreciably with different preparation methods. For copepods and sea urchins, we also found that at least some of the toxic response could be attributed to the chemical oil dispersant. We did not observe the characteristic cardiac deformities that have been previously reported in fish embryos, most likely due to the use of unweathered oil, and, as a consequence, the high proportion of naphthalenes relative to cardiotoxic polycyclic aromatic hydrocarbon in the overall composition. The present study highlights the need to characterize both the TPAH composition and concentration in test solutions when assessing oil toxicity. Environ Toxicol Chem 2022;41:2580-2594. © 2022 SETAC.

A generic environmental risk assessment framework for deep-sea tailings placement.

Deep-sea tailings placement (DSTP) involves the oceanic discharge of tailings at depth (usually >100 m), with the intent of ultimate deposition of tailings solids on the deep-sea bed (>1000 m), well below the euphotic zone. DSTP discharges consist of a slurry of mine tailings solids (finely crushed rock) and residual process liquor containing low concentrations of metals, metalloids, flotation agents and flocculants. This slurry can potentially affect both pelagic and benthic biota inhabiting coastal waters, the continental slope and the deep-sea bed. Building on a conceptual model of DSTP exposure pathways and receptors, we developed a stressor-driven environmental risk assessment (ERA) framework using causal pathways/causal networks for each of eight pelagic and benthic impact zones. For the risk characterisation, each link in each causal pathway in each zone was scored using four levels of likelihood (not possible, possible, likely and certain) and two levels of consequence (not material, material) to give final risk rankings of low, potential, high or very high risk. Of the 246 individual causal pathways scored, 11 and 18 pathways were considered to be of very high risk and high risk respectively. These were confined to the benthic zones in the mixing zone (continental slope) and the primary and secondary deposition zones. The new risk framework was then tested using a case study of the Batu Hijau copper mine in Indonesia, the largest DSTP operation globally. The major risk of DSTP is smothering of benthic biota, even outside the predicted deposition zones. Timescales for recovery are slow and may lead to different communities than those that existed prior to tailings deposition. We make several recommendations for monitoring programs for existing, proposed and legacy DSTP operations and illustrate how georeferenced causal networks are valuable tools for ERA in DSTP.

The influence of salinity on the chronic toxicity of shale gas flowback wastewater to freshwater organisms.

The potential environmental risk associated with flowback waters generated during hydraulic fracturing of target shale gas formations needs to be assessed to enable management decisions and actions that prevent adverse impacts on aquatic ecosystems. Using direct toxicity assessment (DTA), we determined that the shale gas flowback wastewater (FWW) from two exploration wells (Tanumbirini-1 and Kyalla 117 N2) in the Beetaloo Sub-basin, Northern Territory, Australia were chronically toxic to eight freshwater biota. Salinity in the respective FWWs contributed 16% and 55% of the chronic toxicity at the 50% effect level. The remaining toxicity was attributed to unidentified chemicals and interactive effects from the mixture of identified organics, inorganics and radionuclides. The most sensitive chronic endpoints were the snail (Physa acuta) embryo development (0.08-1.1% EC10), microalga (Chlorella sp. 12) growth rate inhibition (0.23-3.7% EC10) and water flea (Ceriodaphnia cf. dubia) reproduction (0.38-4.9% EC10). No effect and 10% effect concentrations from the DTA were used in a species sensitivity distribution to derive "safe" dilutions of 1 in 300 and 1 in 1140 for the two FWWs. These dilutions would provide site-specific long-term protection to 95% of aquatic biota in the unlikely event of an accidental spill or seepage.

Probabilistic risk assessment of mine-derived copper in the Ok Tedi/Fly River, Papua New Guinea.

The Ok Tedi mine discharges waste rock and tailings into the Ok Tedi River in Papua New Guinea. This has resulted in elevated copper concentrations throughout the Ok Tedi/Fly River system, which can potentially impact aquatic biota. Ten years of measured copper and toxicity monitoring data were used to assess the risk of chronic effects from the mine-derived copper. Cumulative probability plots of dissolved and labile copper were compared to a species sensitivity distribution (SSD) of published copper toxicity data for four regions of the river. The Cu-SSD was used to estimate the risk of chronic effects to aquatic organisms in the Ok Tedi/Fly River at a range of potential copper exposure scenarios. The risk to species at the median labile copper concentration for each region showed a gradient effect with distance downstream from the mine and only the most sensitive (0.2-11%) species were at risk. There were copper exceedances of the region-specific guideline values (GV) and default guideline value (DGV) 88% and 74% of the time, respectively, in the Ok Tedi region (closest to the mine) and this is considered a high risk of chronic effects. Measured copper concentrations in the middle Fly River, lower Fly River (farthest downstream of the mine) and the river at Kiunga (reference site) exceeded the region-specific GVs and DGVs less frequently to rarely and present a lower risk of chronic effects from copper. The risk was supported using toxicity tests with the local microalgal species Chlorella sp. Comparison of recent (2010-2020) and historical (1996-2004) copper monitoring data from the Ok Tedi/Fly River indicates a decrease in the labile copper concentrations (30-76%) at key sites from impacted regions and a subsequent decrease in risk. This coincides with improved mining practices aimed at reducing the copper load into the Ok Tedi/Fly River.

The microalga Phaeocystis antarctica is tolerant to salinity and metal mixture toxicity interactions.

Salinity in the Antarctic nearshore marine environment is seasonally dynamic and climate change is driving greater variability through altered sea ice seasons, ocean evaporation rates, and increased terrestrial ice melt. The greatest salinity changes are likely to occur in the nearshore environment where elevated metal exposures from historical waste or wastewater discharge occur. How salinity changes affect metal toxicity has not yet been investigated. This study investigated the toxicity of cadmium, copper, nickel, lead, and zinc, and their equitoxic mixtures across a salinity gradient to the Antarctic marine microalga Phaeocystis antarctica. In the metal-free control exposures, algal population growth rates were significantly lower at salinities <20 PSU or >35 PSU compared to the control growth rate at 35 PSU of 0.60 ± 0.05 doublings per day and there was no growth below 10 or above 68 PSU. Salinity-induced changes to metal speciation and activity were investigated using the WHAM VII model. Percentages of free ion activity and metal-organic complexes increased at decreasing salinities while the activity of inorganic metal complexes increased with increasing salinities. Despite metal speciation and activity changes, toxicity was generally unchanged across the salinity gradient except that there was less copper toxicity and more lead toxicity than model predictions at salinities of 15 and 25 PSU and antagonistic interactions in metal-mixture treatments. In mixtures with and without copper, it was shown that copper was responsible for ∼50% of the antagonism from observed toxicity at salinities below 45 PSU. Across all treatments, using different metal fractions in toxicity models did not improve toxicity predictions compared to dissolved metal concentrations. These results provide evidence that P. antarctica is unlikely to be at a greater risk from metal contaminants as a result of salinity changes.

Metal lability and environmental risk in anthropogenically disturbed Antarctic melt streams.

Antarctic melt streams are important ecosystems that increasingly face contaminant pressures from anthropogenic sources. Metal contaminants are often reported in the limno-terrestrial environment but their speciation is not well characterised, making environmental risk assessments difficult. This paper characterises labile metal concentrations in five melt streams and three shallow lakes around the Casey and Wilkes research stations in East Antarctica using chemical extracts and field deployments of diffusive gradients in thin-film (DGT) samplers. An acute toxicity test with field-collected Ceratadon purpeus and taxonomic identification of diatoms in melt streams were used to infer environmental risk. Copper and zinc were the most labile metals in the melt streams. DGT-labile copper concentrations were up to 3 µg Cu L-1 in melt-stream waters but not labile below the sediment-water interface. DGT-labile zinc concentrations were consistent above and below the sediment-water interface at concentrations up to 14 µg Zn L-1 in four streams, but one stream showed evidence of zinc mineralisation in the sediment with a flux to overlying and pore waters attributed to the reductive dissolution of iron and manganese oxides. Other metals, such as chromium, nickel, and lead were acid-extractable from the sediments, but not labile in pore waters or overlying waters. All streams had unique compositions of freshwater diatoms, but one had particularly reduced diversity and richness, which correlated to metal contamination and sediment physico-chemical properties such as a finer particle size. In laboratory bioassays with field-collected samples of the Antarctic moss C. purpeus, there was no change in photosynthetic efficiency following 28-d exposure to 700, 900, 1060, or 530 µg L-1 of cadmium, copper, nickel, and zinc, respectively. This study shows that microorganisms such as diatoms may be at greater risk from contaminants than mosses, and highlights the importance of geochemical factors controlling metal lability.

A Comparison of Short-Term and Continuous Exposures in Toxicity Tests of Produced Waters, Condensate, and Crude Oil to Marine Invertebrates and Fish.

Petroleum hydrocarbons can be discharged into the marine environment during offshore oil and gas production or as a result of oil spills, with potential impacts on marine organisms. Ecotoxicological assay durations (typically 24-96 h) used to characterize risks to exposed organisms may not always reflect realistic environmental exposure durations in a high-energy offshore environment where hydrocarbons are mixed and diluted rapidly in the water column. To investigate this, we adapted 3 sensitive toxicity tests to incorporate a short-term pulse exposure to 3 petroleum-based products: a produced water, the water-accommodated fraction (WAF) of a condensate, and a crude oil WAF. We measured 48-h mobility of the copepod Acartia sinjiensis, 72-h larval development of the sea urchin Heliocidaris tuberculata, and 48-h embryo survival and deformities of yellowtail kingfish Seriola lalandi, after exposure to a dilution series of each of the 3 products for 2, 4 to 12, and 24 h and for the standard duration of each toxicity test (continuous exposure). Effects on copepod survival and sea urchin larval development were significantly reduced in short-term exposures to produced water and WAFs compared to continuous exposures. Fish embryos, however, showed an increased frequency of deformities at elevated concentrations regardless of exposure duration, although there was a trend toward increased severity of deformities with continuous exposure. The results demonstrate how exposure duration alters toxic response and how incorporating relevant exposure duration to contaminants into toxicity testing may aid interpretation of more realistic effects (and hence an additional line of evidence in risk assessment) in the receiving environment. Environ Toxicol Chem 2021;40:2587-2600. © 2021 CSIRO. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Assessing metal contaminants in Antarctic soils using diffusive gradients in thin-films.

Metal contaminants in Antarctic soils are typically found around research stations which are concentrated in ice-free coastal areas. The risk of these contaminants to the Antarctic environment is not well understood, given Antarctica's unique organisms and climate. This study assessed the use of diffusive gradients in thin-films (DGT), a passive sampler that measures fluxes of labile metals from soils to porewaters, in Antarctic soils. DGT-labile measurements were compared to three chemical extractants of increasing strength including high-purity water, dilute acid (1 M HCl), and concentrated acids (3:1 v/v HNO3:HCl), to understand differences in contaminant geochemistry that may affect environmental risk. One site had high lead concentrations measured with dilute (114 ± 4 mg kg-1) and concentrated (150 ± 10 mg kg-1) acids, while DGT-labile concentrations were below the method detection limit (0.5 µg L-1), indicating that the lead species has low solubility or lability. Another site had low concentrations of zinc measured by dilute (36.2 ± 0.5 mg kg-1) or concentrated (76 ± 6 mg kg-1) acid extracts, but had high DGT-labile concentrations (350 ± 80 µg L-1). This reflects an active source of zinc supplied from soil to pore water over time. Copper was found to be acid extractable, water-soluble, and DGT-labile, with DGT-labile concentrations of up to 12 µg L-1. Despite the soil and metal-specific geochemical differences, any of the extracts could be used with statistical clustering techniques to identify differences in sites with elevated metal concentrations. This study shows that the DGT-method can identify contaminated sites comparably to chemical extracts but provides environmentally relevant measurements of metal contaminant lability in Antarctic soils.

Short-Term Guideline Values for Chlorine in Freshwaters.

The current Australian and New Zealand default guideline value of 3 µg Cl/L for total residual chlorine in freshwaters is largely based on acute data converted to chronic data using a default acute to chronic ratio of 10, without consideration of chlorine decomposition. Given the rapid decomposition of chlorine, initially as hypochlorite and then as chloramine, it is appropriate to consider a guideline value based on short-term (acute) toxicity rather than one based on longer-term chronic data, as has been recommended for chlorine in marine waters. The literature on the fate of chlorine in drinking water discharged to freshwaters and on the ecotoxicity of total residual chlorine has been reviewed, and on the basis of this, revised default guideline values were derived for both hypochlorite and chloramine in freshwater using a species sensitivity distribution of toxicity data. The values for 95% species protection were 7 and 9 µg Cl/L as total residual chlorine, respectively. The former would apply to any total residual chlorine-containing effluent, but in the case of drinking water where dechlorination has been undertaken, the chloramine-based default guideline value is likely to be more appropriate. Both are likely to be conservative because they were largely based on toxicity testing under continuous flow-through conditions. They will apply at the edge of the mixing zone, and the variable receiving water concentration at this point might best be determined from a time-weighted average total residual chlorine concentration. Environ Toxicol Chem 2021;40:1341-1352. © 2021 SETAC.

Development of a bioavailability-based risk assessment framework for nickel in Southeast Asia and Melanesia.

Nickel laterite ore deposits are becoming increasingly important sources of Ni for the global marketplace and are found mainly in tropical and subtropical regions, including Indonesia, the Philippines, Papua New Guinea, Cuba, and New Caledonia. There are few legislatively derived standards or guidelines for the protection of aquatic life for Ni in many of these tropical regions, and bioavailability-based environmental risk assessment (ERA) approaches for metals have mainly been developed and tested in temperate regions, such as the United States and Europe. This paper reports on a multi-institutional, 5-y testing program to evaluate Ni exposure, effects, and risk characterization in the Southeast Asia and Melanesia (SEAM) region, which includes New Caledonia, Papua New Guinea, the Philippines, and Indonesia. Further, we have developed an approach to determine if the individual components of classical ERA, including effects assessments, exposure assessments, and risk characterization methodologies (which include bioavailability normalization), are applicable in this region. A main conclusion of this research program is that although ecosystems and exposures may be different in tropical systems, ERA paradigms are constant. A large chronic ecotoxicity data set for Ni is now available for tropical species, and the data developed suggest that tropical ecosystems are not uniquely sensitive to Ni exposure; hence, scientific support exists for combining tropical and temperate data sets to develop tropical environmental quality standards (EQSs). The generic tropical database and tropical exposure scenarios generated can be used as a starting point to examine the unique biotic and abiotic characteristics of specific tropical ecosystems in the SEAM region. Integr Environ Assess Manag 2021;17:802-813. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

The Diffusive Gradients in Thin Films Technique Predicts Sediment Nickel Toxicity to the Amphipod Melita plumulosa.

The geographical shift of nickel mining to small island countries of the Southeast Asia and Melanesia region has produced a need to assess the environmental risk associated with increased sediment nickel exposure to benthic estuarine/marine biota. Chemical measurements of nickel concentration and potential bioavailability, including the use of diffusive gradients in thin films (DGT), were compared to effects on 10-d reproduction of the epibenthic estuarine/marine amphipod Melita plumulosa in nickel-spiked sediments and field-contaminated sediments with different characteristics. The 10% effect concentrations (EC10s) for amphipod reproduction ranged from 280 to 690 mg/kg total recoverable nickel, from 110 to 380 mg/kg dilute acid-extractable nickel, and from 34 to 87 µg Ni/m2 /h DGT-labile nickel flux. Nickel bioavailability was lower in sediments with greater total organic carbon, clay content, and percentage of fine particles. Measurements of DGT-labile nickel flux at the sediment-water interface integrated exposure to nickel from porewater, overlying water, and ingested sediment exposure pathways and were found to have the strongest relationship with the biological response. At most, there was a 29% reduction in 10-d M. plumulosa reproduction relative to the control when exposed to nickel from field-contaminated sediments collected from nickel laterite mining regions of New Caledonia. The DGT technique can be used as a complementary tool to measure the bioavailability of nickel in estuarine/marine sediments, especially sediments that are in nickel laterite mining regions where there are no or few toxicity data available for determining biological effects on local species. Based on the combined data set of the 3 nickel-spiked sediments a DGT-labile nickel EC10 threshold of 50 (30-69) µg Ni/m2 /h was determined. Environ Toxicol Chem 2021;40:1266-1278. © 2020 SETAC.

Assessing the Risk of Metals and Their Mixtures in the Antarctic Nearshore Marine Environment with Diffusive Gradients in Thin-Films.

Robust environmental assessments and contaminant monitoring in Antarctic near-shore marine environments need new techniques to overcome challenges presented by a highly dynamic environment. This study outlines an approach for contaminant monitoring and risk assessment in Antarctic marine conditions using diffusive gradients in thin-films (DGT) coupled to regionally specific ecotoxicology data and environmental quality standards. This is demonstrated in a field study where DGT samplers were deployed in the near-shore marine environment of East Antarctica around the operational Casey station and the abandoned Wilkes station to measure the time-averaged biologically available fraction of metal contaminants. The incorporation of DGT-labile concentrations to reference toxicity mixture models for three Antarctic organisms predicted low toxic effects (<5% effect to the growth or development of each organism). The comparison of metal concentrations to the Australian and New Zealand default water quality guideline values (WQGVs) showed no marine site exceeding the WQGVs for 95% species protection. However, all sites exceeded the 99% WQGVs due to copper concentrations that are likely of geogenic origin (i.e., not from anthropogenic sources). This study provides evidence supporting the use of the DGT technique to monitor contaminants and assess their environmental risk in the near-shore marine environment of Antarctica.

Preliminary study of cellular metal accumulation in two Antarctic marine microalgae - implications for mixture interactivity and dietary risk.

Localised sites in Antarctica are contaminated with mixtures of metals, yet the risk this contamination poses to the marine ecosystem is not well characterised. Recent research showed that two Antarctic marine microalgae have antagonistic responses to a mixture of five common metals (Koppel et al., 2018a). However, the metal accumulating potential and risk to secondary consumers through dietary exposure are still unknown. This study investigates cellular accumulation following exposure to a mixture of cadmium, copper, nickel, lead, and zinc for the Antarctic marine microalgae, Phaeocystis antarctica and Cryothecomonas armigera. In both microalgae, cellular cadmium, copper, and lead concentrations increased with increasing exposures while cellular nickel and zinc did not. For both microalgae, copper in the metal mixture drives inhibition of growth rate with R2 values > -0.84 for all cellular fractions in both species and the observed antagonism was likely caused by zinc competition, having significantly positive partial regressions. Metal accumulation to P. antarctica and C. armigera is likely to be toxic to consumer organisms, with low exposure concentrations resulting in cellular concentrations of 500 and 1400 × 10-18 mol Zn cell-1 and 160 and 320 × 10-18 mol Cu cell-1, respectively.

Diffusive Gradients in Thin Films Can Predict the Toxicity of Metal Mixtures to Two Microalgae: Validation for Environmental Monitoring in Antarctic Marine Conditions.

Anthropogenic contamination in the Antarctic near-shore marine environment is a challenge for environmental managers because of its isolation, high costs associated with monitoring and remediation activities, and the current lack of Antarctic-specific ecotoxicological data. The present study investigated the application of diffusive gradients in thin films (DGT) with a Chelex-100 binding resin for metal contaminant assessment in Antarctic marine conditions. Diffusion coefficients for cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn), determined at 1 °C, ranged between 2.1 and 2.6×10-6 cm2 /s and were up to 32% lower than those derived by theoretical calculations. Competition of metals on the DGT binding resin was observed at subsaturation concentrations, reducing the effective capacity for metal uptake by approximately 60%. The lability of the dissolved (0.45 µm filterable) Cd, Cu, Pb, and Zn metal fraction to DGT was generally >90% and unaffected by the presence of the Antarctic marine microalga Phaeocystis antarctica. Both DGT and dissolved metal concentrations gave equivalent mixture toxicity predictions in independent action and concentration addition models to P. antarctica and Cryothecomonas armigera; that is, predictions using DGT-labile concentrations also showed antagonism to P. antarctica, which agrees with previously determined mixture interactivity. The benefits of DGT over traditional sampling techniques (i.e., discrete water sampling) include lower method detection limits (MDLs), in situ assessment, and time-averaged concentrations which capture pulses of contamination typical of the Antarctic near-shore marine environment. The present study provides MDLs and recommended minimum deployment times to guide field deployments in Antarctica. Environ Toxicol Chem 2019;38:1323-1333. © 2019 SETAC.

Chronic toxicity of an environmentally relevant and equitoxic ratio of five metals to two Antarctic marine microalgae shows complex mixture interactivity.

Metal contaminants are rarely present in the environment individually, yet environmental quality guidelines are derived from single-metal toxicity data. Few metal mixture studies have investigated more than binary mixtures and many are at unrealistically high effect concentrations to freshwater organisms. This study investigates the toxicity of five metals (Cd, Cu, Ni, Pb, and Zn) to the Antarctic marine microalgae Phaeocystis antarctica and Cryothecomonas armigera. Two mixtures were tested: (i) an equitoxic mixture of contaminants present at their single-metal EC10 concentrations, and (ii) an environmental mixture based on the ratio metal concentrations in a contaminated Antarctic marine bay. Observed toxicity, as chronic population growth rate inhibition, was compared to Independent Action (IA) and Concentration Addition (CA) predictions parameterised to use EC10 values. This allowed for the inclusion of metals with low toxicities. The biomarkers chlorophyll a fluorescence, cell size and complexity, and intracellular lipid concentrations were assessed to investigate possible mechanisms behind metal-mixture interactions. Both microalgae had similar responses to the equitoxic mixture: non-interactive by IA and antagonistic by CA. Toxicity from the environmental mixture was antagonistic by IA to P. antarctica; however, to C. armigera it was concentration-dependent with antagonism at low toxicities and synergism at high toxicities by both IA and CA. Differences in dissolved organic carbon production and detoxification mechanisms may be responsible for these responses and warrants further investigation. This study shows that mixture toxicity interactions can be ratio, species, and concentration dependent. The responses of the microalgae to different mixture ratios highlight the need to assess toxicity at environmentally realistic metal ratios. Parameterising IA and CA reference models to use EC10s allowed for the inclusion of metals at low effect concentrations, which may otherwise be ignored. Reference mixture models are generally suitable for predicting chronic toxicity of metals to these marine microalgae at environmentally realistic ratios and concentrations.

Toxicity of nickel to tropical freshwater and sediment biota: A critical literature review and gap analysis.

More than two-thirds of the world's nickel (Ni) lateritic deposits are in tropical regions, and just less than half are within South East Asia and Melanesia (SEAM). With increasing Ni mining and processing in SEAM, environmental risk assessment tools are required to ensure sustainable development. Currently, there are no tropical-specific water or sediment quality guideline values for Ni, and the appropriateness of applying guideline values derived for temperate systems (e.g., Europe) to tropical ecosystems is unknown. Databases of Ni toxicity and toxicity tests for tropical freshwater and sediment species were compiled. Nickel toxicity data were ranked, using a quality assessment, identifying data to potentially use to derive tropical-specific Ni guideline values. There were no data for Ni toxicity in tropical freshwater sediments. For tropical freshwaters, of 163 Ni toxicity values for 40 different species, high-quality chronic data, based on measured Ni concentrations, were found for just 4 species (1 microalga, 2 macrophytes, and 1 cnidarian), all of which were relevant to SEAM. These data were insufficient to calculate tropical-specific guideline values for long-term aquatic ecosystem protection in tropical regions. For derivation of high-reliability tropical- or SEAM-specific water and sediment quality guideline values, additional research effort is required. Using gap analysis, we recommend how research gaps could be filled. Environ Toxicol Chem 2018;37:293-317. © 2017 SETAC.