Chemiluminescence and electrochemiluminescence of water-soluble iridium(III) complexes containing a tetraethylene-glycol functionalised triazolylpyridine ligand.

BACKGROUND: Iridium(III) complexes, exhibiting high luminescence quantum yields and a wide range of emission colours, are promising alternatives to tris(2,2'-bipyridine)ruthenium(II) for chemiluminescence (CL) and electrochemiluminescence (ECL) detection. This emerging class of reagent, however, is limited by the poor solubility of many iridium(III) complexes in aqueous solution, and lack of understanding of their remarkably variable selectivities towards different analytes. RESULTS: Seven [Ir(C^N)2(pt-TEG)]+ complexes, exhibiting a wide range of reduction potentials and emission energies, were examined with six model analytes. For CL, cerium(IV) was used as the oxidant. The alkylamine analytes generally produced greater CL and ECL with the more readily oxidised Ir(III) complexes (C^N = piq, bt, ppy), predominantly through the 'direct' pathway requiring oxidation of both metal complex and analyte. Aniline derivatives that did not also contain secondary or tertiary alkylamines elicited CL from the less readily oxidised complexes (C^N = df-ppy-CF3, df-ppy) via energy transfer. The most difficult to oxidise complexes (C^N = df(CF3)-ppy-Me, df(CN)-ppy) gave poor responses due to the limited potential window of the solvent and inefficiency of energy transfer to their high energy excited states. Greater CL and/or ECL intensities were generally obtained for each analyte with at least one Ir(III) complex than with [Ru(bpy)3]2+; superior limits of detection for two analytes were demonstrated. SIGNIFICANCE: This exploration of CL/ECL in which the properties of luminophore, analyte and oxidant are all varied provides a new understanding of the influence of the metal-complex potentials and excited state energy on the light-producing and quenching pathways, and consequently, their distinct selectivity towards different analytes. These findings will guide the development of water-soluble Ir(III) complexes as CL and ECL reagents.

Using Nitroxides to Enhance Carbon Fiber Interfacial Adhesion and as an Anchor for "Graft to" Surface Modification Strategies.

Nitroxide groups covalently grafted to carbon fibers are used as anchoring sites for TEMPO-terminated polymers (poly-n-butylacrylate and polystyrene) in a "graft to" surface modification strategy. All surface-modified fibers are evaluated for their physical properties, showing that several treatments have enhanced the tensile strength and Young's modulus compared to the control fibers. Up to an 18% increase in tensile strength and 12% in Young's modulus are observed. Similarly, the evaluation of interfacial shear strength in an epoxy polymer shows improvements of up to 144% relative to the control sample. Interestingly, the polymer-grafted surfaces show smaller increases in interfacial shear strength compared to surfaces modified with a small molecule only. This counterintuitive result is attributed to the incompatibility, both chemical and physical, of the grafted polymers to the surrounding epoxy matrix. Molecular dynamics simulations of the interface suggest that the diminished increase in mechanical shear strength observed for the polymer grafted surfaces may be due to the lack of exposed chain ends, whereas the small molecule grafted interface exclusively presents chain ends to the resin interface, resulting in good improvements in mechanical properties.

Extending Photocatalyst Activity through Choice of Electron Donor.

Sacrificial additives are commonly employed in photoredox catalysis as a convenient source of electrons, but what occurs after electron transfer is often overlooked. Tertiary alkylamines initially form radical cations following electron transfer, which readily deprotonate to form strongly reducing, neutral α-amino radicals. Similarly, the oxalate radical anion (C2O4•-) rapidly decomposes to form CO2•- (E0 ≈ -2.2 V vs SCE). We show that not only are these reactive intermediates formed under photoredox conditions, but they can also impact the desired photochemistry, both positively and negatively. Photoredox systems using oxalate as an electron donor are able to engage substrates with greater energy demands, extending reactivity past the energy limits of single and multiphoton transition metal catalysts. Furthermore, oxalate offers better chemoselectivity than the commonly employed triethylamine when reducing substrates with moderate energy requirements.

The Tandem Photoredox Catalysis Mechanism of [Ir(ppy)2(dtb-bpy)]+ Enabling Access to Energy Demanding Organic Substrates.

We report the discovery of a tandem catalytic process to reduce energy demanding substrates, using the [Ir(ppy)2(dtb-bpy)]+ (1+) photocatalyst. The immediate products of photoinitiated electron transfer (PET) between 1+ and triethylamine (TEA) undergo subsequent reactions to generate a previously unknown, highly reducing species (2). Formation of 2 occurs via reduction and semisaturation of the ancillary dtb-bpy ligand, where the TEA radical cation serves as an effective hydrogen atom donor, confirmed by nuclear magnetic resonance, mass spectrometry, and deuterium labeling experiments. Steady-state and time-resolved luminescence and absorption studies reveal that upon irradiation, 2 undergoes electron transfer or proton-coupled electron transfer (PCET) with a representative acceptor (N-(diphenylmethylene)-1-phenylmethanamine; S). Turnover of this new photocatalytic cycle occurs along with the reformation of 1+. We rationalize our observations by proposing the first example of a mechanistic pathway where two distinct yet interconnected photoredox cycles provide access to an extended reduction potential window capable of engaging a wide range of energy demanding and synthetically relevant organic substrates including aryl halides.

Detection of biogenic amines in pet food ingredients by RP-HPLC with automated dansyl chloride derivatization.

The detection of biogenic amines is of significant interest to the food industry, as they can be used as indicators of food spoilage and they are potentially toxic. Because of their importance, there is a need for automated methods suitable for industry use that can detect a wide range of biogenic amines at sufficient levels for food analysis. In this work, optimized conditions for the automated determination of biogenic amines (histamine, putrescine, cadaverine, spermine, spermidine, tyramine, and tryptamine) derivatized with dansyl chloride are presented. Limits of detection below 0.2 ppm were achieved for seven biogenic amines and percentage recoveries were between 80 and 109% for the seven analytes spiked into meat meal samples. The method is simple and compared well to an existing method for the detection of biogenic amines in pet food ingredients.

Mixed annihilation electrogenerated chemiluminescence of iridium(iii) complexes.

Previously reported annihilation ECL of mixtures of metal complexes have generally comprised Ir(ppy)3 or a close analogue as a higher energy donor/emitter (green/blue light) and [Ru(bpy)3]2+ or its derivative as a lower energy acceptor/emitter (red light). In contrast, here we examine Ir(ppy)3 as the lower energy acceptor/emitter, by combining it with a second Ir(iii) complex: [Ir(df-ppy)2(ptb)]+ (where ptb = 1-benzyl-1,2,3-triazol-4-ylpyridine). The application of potentials sufficient to attain the first single-electron oxidation and reduction products can be exploited to detect Ir(ppy)3 at orders of magnitude lower concentration, or enhance its maximum emission intensity at high concentration far beyond that achievable through conventional annihilation ECL of Ir(ppy)3 involving comproportionation. Moreover, under certain conditions, the colour of the emission can be selected through the applied electrochemical potentials. We have also prepared a novel Ir(iii) complex with a sufficiently low reduction potential that the reaction between its reduced form and Ir(ppy)3+ cannot populate the excited state of either luminophore. This enabled, for the first time, the exclusive formation of either excited state through the application of higher cathodic or anodic potentials, but in both cases, the ECL was greatly diminished by parasitic dark reactions.

Soy flour as an alternative to purified lipoxygenase for the enzymatic synthesis of resolvin analogues.

Specialized pro-resolving mediators are lipid signaling molecules synthesized from omega-3 and -6 polyunsaturated fatty acids, which promote the resolution of the inflammatory response. They are potential drug targets for the treatment of numerous conditions linked with uncontrolled inflammation. Many of these mediators can be effectively synthesized using enzymes, such as lipoxygenases. However, these enzymes are expensive to purchase and can be difficult to isolate. In this work, we show that commercial soy flour can be used directly as a source of lipoxygenase for the biosynthesis of specialized pro-resolving mediators from DHA and other biologically important fatty acids. The reaction was optimized and the products characterized. We found that the reaction yield and products were comparable to those synthesized using a commercial 15-lipoxygenase preparation.

A review of recent advances in chemiluminescence detection using nano-colloidal manganese(IV).

The application of 'soluble' (colloidal) manganese(IV) for chemiluminescence detection is reviewed, focussing on papers published since the last comprehensive review of the subject in 2008. Advances in this reagent system include: the on-line formation of manganese(IV); new insight into the light-producing pathway and selectivity of the reagent; its application to assess total antioxidants in plant derived samples and oxidative stress in biological fluids and tissues; and the replacement of the formaldehyde enhancer with ethanol.

The importance of chain length for the polyphosphate enhancement of acidic potassium permanganate chemiluminescence.

Sodium polyphosphate is commonly used to enhance chemiluminescence reactions with acidic potassium permanganate through a dual enhancement mechanism, but commercially available polyphosphates vary greatly in composition. We have examined the influence of polyphosphate composition and concentration on both the dual enhancement mechanism of chemiluminescence intensity and the stability of the reagent under analytically useful conditions. The average chain length (n) provides a convenient characterisation, but materials with similar values can exhibit markedly different distributions of phosphate oligomers. There is a minimum polyphosphate chain length (∼6) required for a large enhancement of the emission intensity, but no further advantage was obtained using polyphosphate materials with much longer average chain lengths. Providing there is a sufficient average chain length, the optimum concentration of polyphosphate is dependent on the analyte and in some cases, may be lower than the quantities previously used in routine detection. However, the concentration of polyphosphate should not be lowered in permanganate reagents that have been partially reduced to form high concentrations of the key manganese(III) co-reactant, as this intermediate needs to be stabilised to prevent formation of insoluble manganese(IV).

Advances in the use of acidic potassium permanganate as a chemiluminescence reagent: a review.

We review the analytical applications of acidic potassium permanganate chemiluminescence published since our previous comprehensive review in mid-2007 to early 2013. This includes a critical evaluation of evidence for the emitting species, the influence of additives such as polyphosphates, formaldehyde, sulfite, thiosulfate, lanthanide complexes and nanoparticles, the development of a generalized reaction mechanism, and the use of this chemistry in pharmaceutical, clinical, forensic, food science, agricultural and environmental applications.

Determination of neurotransmitters and their metabolites using one- and two-dimensional liquid chromatography with acidic potassium permanganate chemiluminescence detection.

High-performance liquid chromatography with chemiluminescence detection based on the reaction with acidic potassium permanganate and formaldehyde was explored for the determination of neurotransmitters and their metabolites. The neurotransmitters norepinephrine and dopamine were quantified in the left and right hemispheres of rat hippocampus, nucleus accumbens and prefrontal cortex, and the metabolites vanillylmandelic acid, 3,4-dihydrophenylacetic acid, 5-hydroxyindole-3-acetic acid and homovanillic acid were identified in human urine. Under optimised chemiluminescence reagent conditions, the limits of detection for these analytes ranged from 2.5 × 10(-8) to 2.5 × 10(-7) M. For the determination of neurotransmitter metabolites in urine, a two-dimensional high-performance liquid chromatography (2D-HPLC) separation operated in heart-cutting mode was developed to overcome the peak capacity limitations of the one-dimensional separation. This approach provided the greater separation power of 2D-HPLC with analysis times comparable to conventional one-dimensional separations.

Chemiluminescence evidence supporting the selective role of ligands in the permanganate oxidation of micropollutants.

The selective increase in the oxidation rate of certain organic compounds with permanganate in the presence of environmental "ligands" and reduced species has been ascribed to the different reactivity of the target compounds toward Mn(III), which bears striking similarities to recent independent investigations into the use of permanganate as a chemiluminescence reagent. In spite of the importance of Mn(III) in the light-producing pathway, the dependence of the oxidation mechanism for any given compound on this intermediate could not be determined solely through the emission intensity. However, target compounds susceptible to single-electron oxidation by Mn(III) (such as bisphenol A and triclosan) can be easily distinguished by the dramatic increase in chemiluminescence intensity when a permanganate reagent containing high, stable concentrations of Mn(III) is used. The differences are accentuated under the low pH conditions that favor the chemiluminescence emission due to the greater reactivity of Mn(III) and the greater influence of complexing agents. This study supports the previously postulated selective role of ligands and reducing agents in permanganate oxidations and demonstrates a new approach to explore the chemistry of environmental manganese redox processes.

Pollen baiting facilitates the isolation of marine thraustochytrids with potential in omega-3 and biodiesel production.

Marine heterotrophic microbes are capable of accumulating large amounts of lipids, omega-3 fatty acids, carotenoids, and have potential for biodiesel production. Pollen baiting using Pinus radiata pollen grain along with direct plating techniques were used in this study as techniques for the isolation of oil-producing marine thraustochytrid species from Queenscliff, Victoria, Australia. Thirteen isolates were obtained using either direct plating or using pine pollen, with pine pollen acting as a specific substrate for the surface attachment of thraustochytrids. The isolates obtained from the pollen baiting technique showed a wide range of docosahexaenoic acid (DHA) accumulation, from 11 to 41 % of total fatty acid content (TFA). Direct plating isolates showed a moderate range of DHA accumulation, from 19 to 25 % of TFA. Seven isolates were identified on the basis of 18S rRNA sequencing technique as Thraustochytrium species, Schizochytrium species, and Ulkenia species. Although both methods appear to result in the isolation of similar strains, pollen baiting proved to be a simpler method for the isolation of these relatively slow-growing organisms.

Controlled formation of mono- and dihydroxy-resolvins from EPA and DHA using soybean 15-lipoxygenase.

Resolvins and protectins are important anti-inflammatory and pro-resolution compounds derived from the enzymatic oxidation of omega-3 fatty acids all-cis-5,8,11,14,17-eicosapentaenoic acid (EPA) and all-cis-4,7,10,13,16,19-docosahexaenoic acid (DHA). We have developed a simple, controlled method to synthesize an array of resolvin and protectin analogs from fatty acid starting materials using soybean 15-lipoxygenase. The conditions were optimized for the production of both mono- and dihydroxy derivatives, with enzyme concentration and pH found to have a significant effect on the reaction products. The methods were applied to five biologically important omega-3 and omega-6 fatty acid substrates. Mono- and dihydroxy compounds were successfully synthesized from all substrates and the products were characterized by normal phase (NP) HPLC, GC-MS, TOF-MS, UV-visible (UV-vis) spectroscopy, and NMR spectroscopy. The methods could be further applied to any polyunsaturated fatty acids containing the cis-1,4,7,10-undecatetraene moiety to produce a range of novel compounds with potential biological activity.

Selective concentration of EPA and DHA using Thermomyces lanuginosus lipase is due to fatty acid selectivity and not regioselectivity.

The selectivity of anchovy oil hydrolysis was optimised for Thermomyces lanuginosus lipase, so that docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) were concentrated and partially separated from each other. Enzyme concentration and pH control were important factors for effective hydrolysis. Monitoring percent hydrolysis using capillary chromatography with flame ionisation detector (Iatroscan) and fatty acid selectivity using gas chromatography (GC) indicated that during hydrolysis DHA primarily remained on the glycerol backbone, while EPA was progressively removed. (13)C nuclear magnetic resonance (NMR) data showed that selectivity of hydrolysis was primarily due to fatty acid selectivity and not regioselectivity, with hydrolysis from both sn-1,3 and sn-2 sites being equally favoured.

Chemiluminescence detection of cannabinoids and related compounds with acidic potassium permanganate.

This is the first report of chemiluminescence from the reaction of cannabinoids with acidic potassium permanganate, which we have applied to the high performance liquid chromatography (HPLC) determination of cannabidiol (CBD) in industrial-grade hemp. The intensities of the light-producing reactions with two commercially available cannabinoid standards were compared to that of seven model phenolic analytes. Resorcinol, representing the parent phenolic moiety of the cannabinoid class, was shown to react with the permanganate reagents in a manner more similar to phenol than to its hydroxyphenol positional isomers, pyrocatechol and hydroquinone. Alkyl substituents on the phenolic ring, however, have a considerable impact on emission intensity that is dependent upon the position of the groups and the composition of the permanganate reagent. This analytical approach has potential for the determination of other cannabinoids including Δ(9) -tetrahydrocannabinol in drug-grade cannabis.

Kinetics and selectivity of permanganate chemiluminescence: a study of hydroxyl and amino disubstituted benzene positional isomers.

Examination of the chemiluminescence reactions of dihydroxybenzenes, aminophenols and phenylenediamines with acidic potassium permanganate has provided a new understanding of the relationships between analyte structure, reaction conditions, kinetics of the light-producing pathway and emission intensity, with broad implications for this widely utilised chemiluminescence detection system. Using a permanganate reagent prepared in a polyphosphate solution and adjusted to pH 2.5, large differences in the rate of reaction with different positional isomers were observed, with the meta-substituted forms reacting far slower and therefore exhibiting much lower chemiluminescence intensities in flow analysis systems. The preliminary partial reduction of permanganate to form significant concentrations of Mn(III) increased the rate of reaction with all analytes tested, resulting in comparable or (in the case of aminophenol and phenylenediamine) even greater emission intensities for the meta-isomers, demonstrating the opportunity to tune the selectivity of the reagent towards certain classes of compound or even specific positional isomers of the same compound. Using more acidic permanganate reagents, in which polyphosphates are not required, the discrepancy between the chemiluminescence intensities was still observed, but was less prominent due to the generally faster rates of reaction. The enhancement of these chemiluminescence reactions by on-line addition of formic acid or formaldehyde can in part also be attributed to the generation of significant pools of the key Mn(III) precursor to the emitting species.

Chemiluminescence detectors for liquid chromatography.

In this tutorial we describe the construction of chemiluminescence detectors for high performance liquid chromatography (HPLC), comprising the components required to deliver the chemiluminescence reagent, a coiled-tubing flow cell, photomultiplier tube and detector housing, and various options for data acquisition. We also discuss two state-of-the-art commercially available chemiluminescence detectors for HPLC and other flow analysis methodology.