NMR Signatures and Electronic Structure of Ti Sites in Titanosilicalite-1 from Solid-State 47/49Ti NMR Spectroscopy.

Although titanosilicalite-1 (TS-1) is among the most successful oxidation catalysts used in industry, its active site structure is still debated. Recent efforts have mostly focused on understanding the role of defect sites and extraframework Ti. Here, we report the 47/49Ti signature of TS-1 and molecular analogues [Ti(OTBOS)4] and [Ti(OTBOS)3(OiPr)] using novel MAS CryoProbe to enhance the sensitivity. While the dehydrated TS-1 displays chemical shifts similar to those of molecular homologues, confirming the tetrahedral environment of Ti consistent with X-ray absorption spectroscopy, it is associated with a distribution of larger quadrupolar coupling constants, indicating an asymmetric environment. Detailed computational studies on cluster models highlights the high sensitivity of the NMR signatures (chemical shift and quadrupolar coupling constant) to small local structural changes. These calculations show that, while it will be difficult to distinguish mono- vs dinuclear sites, the sensitivity of the 47/49Ti NMR signature should enable distinguishing the Ti location among specific T site positions.

Iron-Catalyzed Olefin Metathesis: Recent Theoretical and Experimental Advances.

The "metathesis reaction" is a straightforward and often metal-catalyzed chemical reaction that transforms two hydrocarbon molecules to two new hydrocarbons by exchange of molecular fragments. Alkane, alkene and alkyne metathesis have become an important tool in synthetic chemistry and have provided access to complex organic structures. Since the discovery of industrial olefin metathesis in the 1960s, many modifications have been reported; thus, increasing scope and improving reaction selectivity. Olefin metathesis catalysts based on high-valent group six elements or Ru(IV) have been developed and improved through ligand modifications. In addition, significant effort was invested to realize olefin metathesis with a non-toxic, bio-compatible and one of the most abundant elements in the earth's crust; namely, iron. First evidences suggest that low-valent Fe(II) complexes are active in olefin metathesis. Although the latter has not been unambiguously established, this review summarizes the key advances in the field and aims to guide through the challenges.

A Crystalline Iron Terminal Methylidene.

Iron methylidene species are alleged intermediates in the Fischer-Tropsch process and in olefin cyclopropanation, yet iron methylidene complexes with unambiguously established molecular and electronic structures remain elusive. In this study, we characterize an iron terminal methylidene complex by single-crystal X-ray diffractometry (scXRD), CHN combustion elemental analysis, 1H/13C/31P/1H-13C NMR, and zero-field 57Fe Mössbauer spectroscopy and study its reactivity. A series of closely related complexes in different oxidation states were synthesized, isolated and characterized in order to validate the electronic structure of the title methylidene complex. The computational analysis substantiates the proposed Fischer-type electronic description while emphasizing high Fe═CH2 bond covalency, considerable double bond order, and thus, substantial alkylidene character.

Cobalt Diazo-Compounds: From Nitrilimide to Isocyanoamide via a Diazomethanediide Fleeting Intermediate.

Lithium trimethylsilyldiazomethanide and a cobalt (II) precursor with an N-anchored tris-NHC (TIMENmes ) ligand provide access to the cobalt nitrilimide 1. Complex 1 was structurally characterized by single-crystal X-ray diffractometry (SC-XRD) and its electronic structure was examined in detail, including EPR spectroscopy, SQUID magnetometry and computational analyses. The desilylation of the C-(trimethylsilyl)nitrilimide reveals a transient complex with an elusive diazomethanediide ligand, which substitutes one of the mesitylene rings of the ancillary ligand through C-N bond cleavage. This transformation results in the cyclometalated cobalt(II) complex 2, featuring a rare isocyanoamido-κ-C ligand.

A Terminal Iron Nitrilimine Complex: Accessing the Terminal Nitride through Diazo N-N Bond Cleavage.

A novel method for the N-N bond cleavage of trimethylsilyl diazomethane is reported for the synthesis of terminal nitride complexes. The lithium salt of trimethylsilyl diazomethane was used to generate a rare terminal nitrilimine transition metal complex with partially occupied d-orbitals. This iron complex 2 was characterized by CHN combustion analysis, 1 H and 13 C NMR spectroscopic analysis, single-crystal X-ray crystallography, SQUID magnetometry, 57 Fe Mössbauer spectroscopy, and computational analysis. The combined results suggest a high-spin d 6 (S=2) electronic configuration and an allenic structure of the nitrilimine ligand. Reduction of 2 results in release of the nitrilimine ligand and formation of the iron(I) complex 3, which was characterized by CHN combustion analysis, 1 H NMR spectroscopic analysis, and single-crystal X-ray crystallography. Treatment of 2 with fluoride salts quantitatively yields the diamagnetic FeIV nitride complex 4, with concomitant formation of cyanide and trimethylsilyl fluoride through N-N bond cleavage.

Lead and HTM Free Stable Two-Dimensional Tin Perovskites with Suitable Band Gap for Solar Cell Applications.

Organic-inorganic hybrid perovskites have attracted great attention over the last few years as potential light-harvesting materials for efficient and cost-effective solar cells. However, the use of lead iodide in state-of-the-art perovskite devices may demonstrate an obstacle for future commercialization due to toxicity of lead. Herein we report on the synthesis and characterization of low dimensional tin-based perovskites. We found that the use of symmetrical imidazolium-based cations such as benzimidazolium (Bn) and benzodiimidazolium (Bdi) allow the formation of 2D perovskites with relatively narrow band gaps compared to traditional -NH3 + amino groups, with optical band gap values of 1.81 eV and 1.79 eV for Bn2 SnI4 and BdiSnI4 respectively. Furthermore, we demonstrate that the optical properties in this class of perovskites can be tuned by formation of a quasi 2D perovskite with the formula Bn2 FASn2 I7 . Additionally, we investigate the change in band gap in the mixed Sn/Pb solid solution Bn2 Snx Pbx-1 I4 . Devices fabricated with Bn2 SnI4 show promising efficiencies of around 2.3 %.

Bis(arylimidazole) Iridium Picolinate Emitters and Preferential Dipole Orientation in Films.

The straightforward synthesis and photophysical properties of a new series of heteroleptic iridium(III) bis(2-arylimidazole) picolinate complexes are reported. Each complex has been characterized by nuclear magnetic resonance, UV-vis, cyclic voltammetry, and photoluminescent angle dependency, and the emissive properties of each are described. The preferred orientation of transition dipoles in emitter/host thin films indicated more preferred orientation than homoleptic complex Ir(ppy)3.

Effect of Donor Groups on the Performance of Cyclometalated Ruthenium Sensitizers in Dye-Sensitized Solar Cells.

Three new tris-heteroleptic complexes of ruthenium(II) were designed by coordinating the metal center with cyclometalating, anchoring, and auxiliary ligands with different donor substituents. N-Hexylcarbazole, N-hexylphenothiazine, and N-hexyldiphenylamine donor moieties were used as substituents on the auxiliary ligands for SA633, SA634, and SA635, respectively. Complexes were characterized by 1H and 13C 2D-COSY NMR techniques. These complexes provide power conversion efficiencies in the range of 7.6-8.2% when they are employed in state of the art dye-sensitized solar cells (DSCs) with cobalt electrolyte. Various electrochemical and transient techniques were used to unveil the unexpected differences in the performance of these very similar sensitizers.

Unraveling the Dual Character of Sulfur Atoms on Sensitizers in Dye-Sensitized Solar Cells.

Cyclometalated ruthenium sensitizers have been synthesized that differ with number of thiophene units on the auxiliary ligands. Sensitizers possessing four (SA25, SA246, and SA285) or none (SA282) sulfur atoms in their structures, were tested in solar cell devices employing I3-/I- redox mediator, enabling an estimation of the influence of sulfur-iodine/iodide interactions on dye-sensitized solar cell (DSC) performance. Power conversion efficiencies over 6% under simulated AM 1.5 illumination (1 Sun) were achieved with all the sensitizers. Consistently higher open-circuit voltage (VOC) and fill factor (FF) values were measured using SA282. Scrutinizing the DSCs with these dyes by transient absorption spectroscopy (TAS) and electrochemical impedance spectroscopy (EIS) indicate that sulfur atom induced recombination cancels favorable increased regeneration resulting in decreased power conversion efficiencies (PCEs). The data indicate that, to reduce charge recombination channels, the use of sulfur-containing aromatic rings should be avoided if possible in the dye structure when I3-/I- redox mediator is used.

Ligand Engineering for the Efficient Dye-Sensitized Solar Cells with Ruthenium Sensitizers and Cobalt Electrolytes.

Over the past 20 years, ruthenium(II)-based dyes have played a pivotal role in turning dye-sensitized solar cells (DSCs) into a mature technology for the third generation of photovoltaics. However, the classic I3(-)/I(-) redox couple limits the performance and application of this technique. Simply replacing the iodine-based redox couple by new types like cobalt(3+/2+) complexes was not successful because of the poor compatibility between the ruthenium(II) sensitizer and the cobalt redox species. To address this problem and achieve higher power conversion efficiencies (PCEs), we introduce here six new cyclometalated ruthenium(II)-based dyes developed through ligand engineering. We tested DSCs employing these ruthenium(II) complexes and achieved PCEs of up to 9.4% using cobalt(3+/2+)-based electrolytes, which is the record efficiency to date featuring a ruthenium-based dye. In view of the complicated liquid DSC system, the disagreement found between different characterizations enlightens us about the importance of the sensitizer loading on TiO2, which is a subtle but equally important factor in the electronic properties of the sensitizers.

Benzotrithiophene-Based Hole-Transporting Materials for 18.2 % Perovskite Solar Cells.

New star-shaped benzotrithiophene (BTT)-based hole-transporting materials (HTM) BTT-1, BTT-2 and BTT-3 have been obtained through a facile synthetic route by crosslinking triarylamine-based donor groups with a benzotrithiophene (BTT) core. The BTT HTMs were tested on solution-processed lead trihalide perovskite-based solar cells. Power conversion efficiencies in the range of 16 % to 18.2 % were achieved under AM 1.5 sun with the three derivatives. These values are comparable to those obtained with today's most commonly used HTM spiro-OMeTAD, which point them out as promising candidates to be used as readily available and cost-effective alternatives in perovskite solar cells (PSCs).

Molecular Engineering of Functional Materials for Energy and Opto-Electronic Applications.

This review presents an overview of the dedicated research directions of the Group for Molecular Engineering of Functional Materials (GMF). This includes molecular engineering aspects of sensitizers constructed from ruthenium complexes, organic molecules, porphyrins and phthalocyanines. Manipulation of organometal trihalide perovskites, and charge transporting materials for high performance perovskite solar cells and photo-detectors are also described. Controlling phosphorescence color, and quantum yields in iridium complexes by tailoring ligands for organic light emitting diodes are demonstrated. Efficient reduction of CO(2) to CO using molecular catalyst on a protected Cu(2)O photocathode, and cost-effective water-splitting cell using a high efficiency perovskite solar cell are presented.