Titania-zeolite composite for tetracycline photocatalytic degradation under visible light: A comparison between doping and ion exchange.

In this study, TiO2 supported over embryonic Beta zeolite (BEA) was prepared for the photocatalytic degradation of Tetracycline (TC) antibiotic under visible light. The immobilization of sol-gel TiO2 over the zeolite increased its surface area from 33 (m2/g) to 226 (m2/g) and enhanced its adsorption efficiency from 8 % to 18 %. In order to expand the photocatalytic activity of TiO2 towards the visible light region (i.e. λ > 380 nm), two different metal sensitization techniques with Iron ions from aqueous solution of FeCl3 were explored. In the ion-exchange method, the substitutional cations within the TiO2/BEA structure were exchanged with Fe3+. Whereas, in the doping technique, solgel TiO2 was doped with Fe3+ during its synthesis and before its immobilization over Zeolite. Four different samples with 20, 40, 60, and 100 % w/w of TiO2/BEA ratio were prepared. After testing the various ion-exchanged photocatalysts under blue and white lights, only Fe-60%TiO2/BEA showed better activity compared to pure TiO2 under white light at TC initial concentration, C o = 20 ppm. For the doped immobilized Titania with 60 wt% TiO2/BEA, three different doped photocatalysts were prepared with 3 %, 7 %, and 10 % per mole Fe/TiO2. All the Fe-doped TiO2/BEA photocatalysts showed better activity compared to pure TiO2 under white light. Under solar irradiations, the 3 % Fe-doped TiO2/BEA was able to degrade all TC within 120 min, while Fe-60%TiO2/BEA needed 200 min, and TiO2 needed more than 300 min. This enhanced performance was a result of both increased surface area due to immobilization over BEA as well as iron doping by Fe3+ that simultaneously increased the visible light absorption of TiO2 and minimized the charge carrier recombination effect.

Electrospun Metal-Organic Framework-Fabric Nanocomposites as Efficient Bactericides.

In this work, we utilized electrospinning to develop advanced composite membranes of polyvinyl chloride (PVC) loaded with postmetalated metal-organic frameworks (MOFs), specifically UiO-66(COOH)2-Ag and ZIF-8-Ag. This innovative technique led to the creation of highly stable PVC/MOFs-Ag membrane composites, which were thoroughly characterized using various analytical techniques, including scanning electron microscopy, powder X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, porosity analysis, and water contact angle measurement. The results verified the successful integration of MOF crystals within the nanofibrous PVC membranes. The obtained composites exhibited larger fiber diameters for 5 and 10% MOF loadings and a smaller diameter for 20% loading. Additionally, they displayed greater average pore sizes than traditional PVC membranes across most MOF loading percentages. Furthermore, we examined the antibacterial properties of the fabricated membranes at different MOFs-Ag loadings. The findings revealed that the membranes demonstrated significant antibacterial activity up to 95% against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria as the MOFs-Ag loading increased, even when maintaining a constant silver concentration. This indicates a contact-based inhibition mechanism. The outcomes of this study have crucial implications for the development of novel, stable, and highly effective antibacterial materials, which could serve as superior alternatives for face masks and be integrated into materials requiring regular decontamination, as well as potential water filtration systems.

Bioevaluation of quinoline-4-carbonyl derivatives of piperazinyl-benzothiazinones as promising antimycobacterial agents.

The quinoline moiety remains a privileged antitubercular (anti-TB) pharmacophore, whereas 8-nitrobenzothiazinones are emerging potent antimycobacterial agents with two investigational candidates in the clinical pipeline. Herein, we report the synthesis and bioevaluation of 30 piperazinyl-benzothiazinone-based quinoline hybrids as prospective anti-TB agents. Preliminary evaluation revealed 24/30 compounds exhibiting substantial activity (minimum inhibitory concentration [MIC] = 0.06-1 µg/ml) against Mycobacterium tuberculosis (Mtb) H37Rv. Cytotoxicity analysis against Vero cells found these to be devoid of any significant toxicity, with the majority displaying a selectivity index of >80. Furthermore, potent nontoxic compounds, when screened against clinical isolates of drug-resistant Mtb strains, demonstrated equipotent inhibition with MIC values of 0.03-0.25 µg/ml. A time-kill study identified a lead compound exhibiting concentration-dependent bactericidal activity, with 10× MIC completely eliminating Mtb bacilli within 7 days. Along with acceptable aqueous solubility and microsomal stability, the optimum active compounds of the series manifested all desirable traits of a promising antimycobacterial candidate.

Design, synthesis, in silico, and in vitro evaluation of 3-phenylpyrazole acetamide derivatives as antimycobacterial agents.

Mycobacterium tuberculosis (Mtb) is one of the most dangerous pathogens affecting immunocompetent and immunocompromised patients worldwide. Novel molecules, which are efficient and can reduce the duration of therapy against drug-resistant strains, are an urgent unmet need of the hour. In our current study, a series of new 2-(3-phenyl-1H-pyrazol-1-yl)acetamide and N'-benzylidene-2-(3-phenyl-1H-pyrazol-1-yl)acetohydrazide derivatives were designed, synthesized, and evaluated for their antimycobacterial potential. The biological evaluation revealed that 6b, 6m, 6l, 7a, and 7k exhibited selective and potent inhibitory activity against Mtb. Furthermore, compounds 6m and 7h were found to be nontoxic to Vero cells with CC50 of greater than 20 and 80 mg/ml, respectively, and exhibited promising selectivity indices (SI) of greater than 666 and 320, respectively. All derivatives exhibited excellent ADME (absorption, distribution, metabolism, and excretion) properties in silico. Also, all the derivatives were found compliant with Lipinski's rule of five, showing their druggability profile. Molecular docking insights of these derivatives have shown outstanding binding energies on the mycobacterial membrane protein large transporters. These results indicate that this scaffold may lead to a potential antimycobacterial drug candidate in the discovery of antitubercular agents.

Biodiesel production over a catalyst prepared from biomass-derived waste date pits.

Date palms are predominately produced in arid regions and the date pits, or seeds, produced from them are sometimes considered to be a waste. Date pits, ground to powder following an oil extraction, were used to synthesize a renewable heterogeneous catalyst. The green carbon catalyst was modified by an alkaline earth metal oxide (CaO). The oil extracted from date pits was transformed into biodiesel. The biodiesel process was optimized and the optimal yield was 98.2 wt% at a reaction temperature of 70 °C, reaction time ∼120 min, methanol to oil molar ratio of 12 and catalyst loading of 4.5 wt%. The quality of the produced biodiesel meets the standard limits set by regulating agencies (ASTM, EU) which indicates its suitability to be used as a fuel. Thus, it can be concluded that the green carbon catalyst synthesized from waste date pits has a high potential for biodiesel production.

Solar pyrolysis of waste rubber tires using photoactive catalysts.

The solar pyrolysis of waste tire rubber was investigated with the application of heterogeneous photocatalysts including TiO2, Pd/TiO2, Pt/TiO2, Pd-Pt/TiO2, and Bi2O3/SiO2/TiO2. Experiments were performed at temperatures ranging between 550 and 570 °C under solar irradiations of 950-1050 W/m2. The gas yield from non-catalytic solar pyrolysis was at 20% while the use of TiO2 catalyst increased the gas yield to 27%. Doping of TiO2 with noble metals and Bi2O3/SiO2 metal oxides enhanced further the cracking ability of the catalyst. Bi2O3/SiO2/TiO2 gave a 32% gas yield. The highest gas yields of 40% and 41% were achieved over Pd-Pt/TiO2 and Pd/TiO2 catalysts, respectively. Catalyst characterization by BET, SEM, EDX and XRD showed the role of metal doping in altering the morphology of TiO2, resulting in nanocrystallites, larger pore volume and higher surface area. Both, Pd and Bi influenced the photocatalytic properties of TiO2 improving cracking activity during pyrolysis of waste rubber.

Characterization of adsorption of aqueous arsenite and arsenate onto charred dolomite in microcolumn systems.

In this work, the removal of arsenite, As(III), and arsenate, As(V), from aqueous solutions onto thermally processed dolomite (charred dolomite) via microcolumn was evaluated. The effects of mass of adsorbent (0.5-2 g), initial arsenic concentration (50-2000 ppb) and particle size (<0.355-2 mm) on the adsorption capacity of charred dolomite in a microcolumn were investigated. It was found that the adsorption of As(V) and As(III) onto charred dolomite exhibited a characteristic 'S' shape. The adsorption capacity increased as the initial arsenic concentration increased. A slow decrease in the column adsorption capacity was noted as the particle size increased from>0.335 to 0.710-2.00 mm. For the binary system, the experimental data show that the adsorption of As(V) and As(III) was independent of both ions in solution. The experimental data obtained from the adsorption process were successfully correlated with the Thomas Model and Bed Depth Service Time Model.

Influence of solution chemistry on Cr(VI) reduction and complexation onto date-pits/tea-waste biomaterials.

Tea waste (TW) and Date pits (DP) were investigated for their potential to remove toxic Cr(VI) ions from aqueous solution. Investigations showed that the majority of the bound Cr(VI) ions were reduced to Cr(III) after biosorption at acidic conditions. The electrons for the reduction of Cr(VI) may have been donated from the TW and DP biomasses. The experimental data obtained for Cr(VI)-TW and Cr(VI)-DP at different solution temperatures indicate a multilayer type biosorption, which explains why the Sips isotherm accurately represents the experimental data obtained in this study. The Sips maximum biosorption capacities of Cr(VI) onto TW and DP were 5.768 and 3.199 mmol/g at 333 K, respectively, which is comparatively superior to most other low-cost biomaterials. Fourier transform infrared spectroscopic analysis of the metal loaded biosorbents confirmed the participation of -COOH, -NH(2) and O-CH(3) groups in the reduction and complexation of chromium. Thermodynamic parameters demonstrated that the biosorption of Cr(VI) onto TW and DP biomass was endothermic, spontaneous and feasible at 303-333 K. The results evidently indicated that tea waste and date pits would be suitable biosorbents for Cr(VI) in wastewater under specific conditions.

Dilute phosphoric acid-catalysed hydrolysis of municipal bio-waste wood shavings using autoclave parr reactor system.

The visibility of using municipal bio-waste, wood shavings, as a potential feedstock for ethanol production was investigated. Dilute acid hydrolysis of wood shavings with H3PO4 was undertaken in autoclave parr reactor. A combined severity factor (CSF) was used to integrate the effects of hydrolysis times, temperature and acid concentration into a single variable. Xylose concentration reached a maximum value of 17 g/100 g dry mass corresponding to a yield of 100% at the best identified conditions of 2.5 wt.% H3PO4, 175 °C and 10 min reaction time corresponding to a CSF of 1.9. However, for glucose, an average yield of 30% was obtained at 5 wt.% H3PO4, 200 °C and 10 min. Xylose production increased with increasing temperature and acid concentration, but its transformation to the degradation product furfural was also catalysed by those factors. The maximum furfural formed was 3 g/100 g dry mass, corresponding to the 24% yield.

Adsorption mechanisms of removing heavy metals and dyes from aqueous solution using date pits solid adsorbent.

A potential usefulness of raw date pits as an inexpensive solid adsorbent for methylene blue (MB), copper ion (Cu(2+)), and cadmium ion (Cd(2+)) has been demonstrated in this work. This work was conducted to provide fundamental information from the study of equilibrium adsorption isotherms and to investigate the adsorption mechanisms in the adsorption of MB, Cu(2+), and Cd(2+) onto raw date pits. The fit of two models, namely Langmuir and Freundlich models, to experimental data obtained from the adsorption isotherms was checked. The adsorption capacities of the raw date pits towards MB and both Cu(2+) and Cd(2+) ions obtained from Langmuir and Freundlich models were found to be 277.8, 35.9, and 39.5 mg g(-1), respectively. Surface functional groups on the raw date pits surface substantially influence the adsorption characteristics of MB, Cu(2+), and Cd(2+) onto the raw date pits. The Fourier transform infrared spectroscopy (FTIR) studies show clear differences in both absorbances and shapes of the bands and in their locations before and after solute adsorption. Two mechanisms were observed for MB adsorption, hydrogen bonding and electrostatic attraction, while other mechanisms were observed for Cu(2+) and Cd(2+). For Cu(2+), binding two cellulose/lignin units together is the predominant mechanism. For Cd(2+), the predominant mechanism is by binding itself using two hydroxyl groups in the cellulose/lignin unit.

Mechanisms and chemistry of dye adsorption on manganese oxides-modified diatomite.

The investigations into structural changes which occur during adsorbent modification and the adsorption mechanisms are essential for an effective design of adsorption systems. Manganese oxides were impregnated onto diatomite to form the type known as delta-birnessite. Initial investigations established the effectiveness of manganese oxides-modified diatomite (MOMD) to remove basic and reactive dyes from aqueous solution. The adsorption capacity of MOMD for methylene blue (MB), hydrolysed reactive black (RB) and hydrolysed reactive yellow (RY) was 320, 419, and 204mg/g, respectively. Various analytical techniques were used to characterise the structure and the mechanisms of the dye adsorption process onto MOMD such as Fourier transform infrared (FTIR), X-ray diffraction (XRD) and atomic absorption spectrometry (A.A.). A small shift to higher values of the d-spacing of dye/MOMD was observed indicating that a small amount of the dye molecules were intercalated in the MOMD structure and other molecules were adsorbed on the external surface of MOMD. Two mechanisms of dye adsorption onto MOMD were proposed; intercalation of the dye in the octahedral layers and adsorption of the dye on the MOMD external surface. Moreover, the results demonstrated that the MOMD structure was changed upon insertion of MB and RY with an obvious decrease in the intensity of the second main peak of the MOMD X-ray pattern.

Adsorption behaviour of methylene blue onto Jordanian diatomite: a kinetic study.

The effect of initial concentration, particle size, mass of the adsorbent, pH and agitation speed on adsorption behaviour of methylene blue (MB) onto Jordanian diatomite has been investigated. The maximum adsorption capacity, q, increased from 75 to 105 mg/g when pH of the dye solution increased from 4 to 11. It is clear that the ionisable charge sites on the diatomite surface increased when pH increased from 4 to 11. When the solution pH was above the pH(ZPC), the diatomite surface had a negative charge, while at low pH (pH<5.4) it has a positive charge. The adsorption capacity increased from 88.6 to 143.3mg/g as the initial MB concentrations increased from 89.6 to 225.2mg/dm(3). The experimental results were also applied to the pseudo-first and -second order kinetic models. It is noticed that the whole experimental data of MB adsorption onto diatomite did not follow the pseudo-first order model and had low correlation coefficients (R(2)<0.3). The calculated adsorption capacity, q(e,cal), values obtained from pseudo-first order kinetic model did not give acceptable values, q(e,exp.) The maximum uptake capacity seems to be independent of the particle size of the diatomite when the particle size distribution is less than 250-500 microm. While at larger particle size 250-500 microm, the maximum uptake capacity was dependent on the particle size. It would imply that the MB adsorption is limited by the external surface and that intraparticle diffusion is reduced. The effect of the agitation speeds on the removal of MB from aqueous solution using the diatomite is quite low. The MB removal increased from 43 to 100% when mass of the diatomite increased from 0.3 to 1.7 g.