3D Reconstruction and Virtual Reality Is an Acceptable and Feasible Method for Addressing Body Image in Bariatric Metabolic Surgery.

BACKGROUND: Patients living with obesity continue to experience body image dissatisfaction following bariatric metabolic surgery. The underlying reasons are poorly understood but may be due to unmet expectations. Negative body image perception following metabolic surgery leads to poorer psychological and clinical outcomes. This study aims to establish the acceptability and feasibility of three-dimensional (3D) reconstruction and virtual reality (VR) as a method of providing psychological support to bariatric patients to improve body image satisfaction and interventional outcomes. METHODS: Seven participants were recruited from the Imperial Weight Centre. 3D photographs were captured and processed to produce two 3D reconstructed images with 15% and 25% total weight loss. Participants were shown their images using VR and participated in peer group workshops. RESULTS: Six participants were retained until the end of the study. Five out of six participants agreed the images provided them with a more accurate representation of their body changes and overall appearance following bariatric metabolic surgery. All participants strongly agreed with the group setting and felt VR facilitated discussions on body image. Overall, all participants felt that the use of VR and 3D reconstruction is beneficial in supporting patients to adjust to changes in their body image after bariatric metabolic surgery. CONCLUSIONS: This is the first study to explore and demonstrate that 3D reconstruction and VR is an acceptable and feasible method providing patients with a realistic expectation of how their body will change following significant weight loss, potentially improving body image satisfaction after surgery, as well as psychological and interventional outcomes.

The mitigating effect of para-hydroxycinnamic acid in bleomycin-induced pulmonary fibrosis in mice through targeting oxidative, inflammatory and fibrotic pathways.

This study investigated the therapeutic benefits of para-hydroxycinnamic acid in mice with bleomycin-induced lung fibrosis. Forty male BALB/c mice were randomly assigned to four groups: normal, which received 0.9% normal saline; induced, which received a single dose of bleomycin (5 mg/kg) by oropharyngeal challenge; pirfenidone-treated; and para-hydroxycinnamic acid-treated, which challenged with bleomycin and received a daily oral dose of 300 and 50 mg/kg, respectively, from day 7 to day 21. Tissue pro-fibrotic and inflammatory cytokines, oxidative indicators, pulmonary histopathology, immunohistochemistry of fibrotic proteins and the assessment of gene expression by RT-qPCR were evaluated on day 22 after euthanizing animals. Pirfenidone and para-hydroxycinnamic acid managed to alleviate the fibrotic endpoints by statistically improving the weight index, histopathological score and reduced expression of fibrotic-related proteins in immune-stained lung sections, as well as fibrotic markers measured in serum samples. They also managed to alleviate tissue levels of oxidative stress and inflammatory and pro-fibrotic mediators. para-Hydroxycinnamic acid enhanced the expression of crucial genes associated with oxidative stress, inflammation and fibrosis in vivo. para-Hydroxycinnamic acid has demonstrated similar effectiveness to pirfenidone, suggesting it could be a promising treatment for fibrotic lung conditions by inhibiting the TGF-ß1/Smad3 pathway or through its anti-inflammatory and antioxidant properties.

Omics technology draws a comprehensive heavy metal resistance strategy in bacteria.

The rapid industrial revolution significantly increased heavy metal pollution, becoming a major global environmental concern. This pollution is considered as one of the most harmful and toxic threats to all environmental components (air, soil, water, animals, and plants until reaching to human). Therefore, scientists try to find a promising and eco-friendly technique to solve this problem i.e., bacterial bioremediation. Various heavy metal resistance mechanisms were reported. Omics technologies can significantly improve our understanding of heavy metal resistant bacteria and their communities. They are a potent tool for investigating the adaptation processes of microbes in severe conditions. These omics methods provide unique benefits for investigating metabolic alterations, microbial diversity, and mechanisms of resistance of individual strains or communities to harsh conditions. Starting with genome sequencing which provides us with complete and comprehensive insight into the resistance mechanism of heavy metal resistant bacteria. Moreover, genome sequencing facilitates the opportunities to identify specific metal resistance genes, operons, and regulatory elements in the genomes of individual bacteria, understand the genetic mechanisms and variations responsible for heavy metal resistance within and between bacterial species in addition to the transcriptome, proteome that obtain the real expressed genes. Moreover, at the community level, metagenome, meta transcriptome and meta proteome participate in understanding the microbial interactive network potentially novel metabolic pathways, enzymes and gene species can all be found using these methods. This review presents the state of the art and anticipated developments in the use of omics technologies in the investigation of microbes used for heavy metal bioremediation.

Vinpocetine alleviated alveolar epithelial cells injury in experimental pulmonary fibrosis by targeting PPAR-γ/NLRP3/NF-κB and TGF-ß1/Smad2/3 pathways.

This study aimed to investigate the potential anti-fibrotic activity of vinpocetine in an experimental model of pulmonary fibrosis by bleomycin and in the MRC-5 cell line. Pulmonary fibrosis was induced in BALB/c mice by oropharyngeal aspiration of a single dose of bleomycin (5 mg/kg). The remaining induced animals received a daily dose of pirfenidone (as a standard anti-fibrotic drug) (300 mg/kg/PO) and vinpocetine (20 mg/kg/PO) on day 7 of the induction till the end of the experiment (day 21). The results of the experiment revealed that vinpocetine managed to alleviate the fibrotic endpoints by statistically improving (P ≤ 0.05) the weight index, histopathological score, reduced expression of fibrotic-related proteins in immune-stained lung sections, as well as fibrotic markers measured in serum samples. It also alleviated tissue levels of oxidative stress and inflammatory and pro-fibrotic mediators significantly elevated in bleomycin-only induced animals (P ≤ 0.05). Vinpocetine managed to express a remarkable attenuating effect in pulmonary fibrosis both in vivo and in vitro either directly by interfering with the classical TGF-ß1/Smad2/3 signaling pathway or indirectly by upregulating the expression of Nrf2 enhancing the antioxidant system, activating PPAR-γ and downregulating the NLRP3/NF-κB pathway making it a candidate for further clinical investigation in cases of pulmonary fibrosis.

A comparative study of the risk assessment and heavy metal contamination of coastal sediments in the Red sea, Egypt, between the cities of El-Quseir and Safaga.

This study aimed to assess the influence of pollution on the quality of sediments and the risks associated with El-Qusier and Safaga Cities, Red Sea, Egypt, during 2021, divided into four sectors, using multiple pollution indices. To achieve that, we evaluated the metal pollution index (MPI), contamination factor (Cf), pollution load index (PLI), contamination security index (CSI), and anthropogenicity (Anp%). Moreover, carcinogenic and non-carcinogenic risks are used for human health hazards. Results indicated that Mn and Fe recorded the highest concentrations, whereas Cd had the lowest. El-Quseir City sediments were found the following metal ions: Fe > Mn > Ni > Zn > Cu > Co > Pb > Cd, where the order in the Safaga City was: Fe > Mn > Zn > Ni > Cu > Pb > Co > Cd. MPI > 1, this is alarming in the study area due to heavy metal pollution. In addition, Cf < 1 in all metals except Cd with contamination degree CD ranged from low to considerable contamination in El-Qusier city. In contrast, contamination ranged from significant to very high in Safaga city. PLI < 1 is lower than the reference at all monitored stations. CSI values ranged from relatively low to moderate. Besides Cd, data reflect each element's low environmental danger (EriMe40). This study's risk index (RI) is low to moderate in Sector 1 and high to extremely high in Sector 2. HQ and HI index < 1 means it is safe for human health in order: HI ingestion > HI dermal. CSR for different pathways was recorded as dermal > ingestion, in which total CSR for all paths is considered harmful, and the cancer risk is troublesome and higher than the reference ranges of 1 × 10-6-1 × 10-4. In conclusion, the examined heavy metals provide environmental hazards across the assessed locations.

Measuring uterine cavity volume with sonohysterography: A new objective method.

Introduction: The uterine cavity is a potential space with limited methods for evaluating its volume, limiting the evaluation of interventions' effectiveness in various uterine conditions. This study aims to objectively measure the uterine cavity volume using sonohysterography coupled with a Foley catheter to provide a normative model of age and parity-related uterine cavity volume. Methods: The research included 35 women (group 1) with a total abdominal hysterectomy and 150 women (group 2) who underwent sonohysterography for various gynecologic indications. Saline infusion sonography was administered to all patients. The most common shape obtained after the saline infusion was taken to measure the uterine cavity's dimensions and volume. The uterine cavity volumes, as measured by sonohysterography, and the volumes of saline injected after the hysterectomy were compared. Results: A significant association exists between uterine cavity volumes measured by sonohysterography and true volumes measured immediately after hysterectomy (p = 0.001). The association between uterine cavity volume measured by sonohysterography and using only a Foley catheter balloon was statistically insignificant (p = 0.13). A statistically significant positive association was observed between the uterine cavity volume and the patient's age and parity (p ⩽ 0.05). Conclusion: Measuring the uterine cavity volume using a paediatric Foley catheter balloon coupled with sonohysterography offers an objective approach to measuring a normal (without gross pathologies) uterus volume. This technique would improve the diagnostic accuracy and the management of women with distinct uterine cavity morphologies.

Salvimulticanol from Salvia multicaulis suppresses LPS-induced inflammation in RAW264.7 macrophages: in vitro and in silico studies.

Sustained inflammatory responses can badly affect several vital organs and lead to chronic inflammation-related disorders, such as atherosclerosis, pneumonia, rheumatoid arthritis, obesity, diabetes, Alzheimer's disease, and cancers. Salvia multicaulis is one of the widely distributed plants that contains several biologically active phytochemicals and diterpenoids with anti-inflammatory effects. Therefore, finding alternative and safer natural plant-extracted compounds with good curative anti-inflammatory efficiencies is an urgent need for the clinical treatment of inflammation-related diseases. In the current study, S. multicaulis Vahl was used to extract and isolate two compounds identified as salvimulticanol and candesalvone B methyl ester to examine their effects against inflammation in murine macrophage RAW264.7 cells that were induced by lipopolysaccharide (LPS). Accordingly, after culturing RAW264.7 cells and induction of inflammation by LPS (100 ng/ml), cells were exposed to different concentrations (9, 18, 37.5, 75, and 150 µM) of each compound. Then, Griess assay for detection of nitric oxide (NO) levels and western blotting for the determination of inducible nitric oxide synthase (iNOS) expression were performed. Molecular docking and molecular dynamics (MD) simulation studies were employed to investigate the anti-inflammatory mechanism. Our obtained results validated that the level of NO was significantly decreased in the macrophage cell suspensions as a response to salvimulticanol treatment in a dose-dependent manner (IC50: 25.1 ± 1.2 µM) as compared to the methyl ester of candesalvone B which exerted a weaker inhibition (IC50: 69.2 ± 3.0 µM). This decline in NO percentage was comparable with a down-regulation of iNOS expression by western blotting. Salvimulticanol strongly interacted with both the Toll-like receptor 4 (TLR4)/myeloid differentiation factor 2 (MD-2) complex and the inhibitor of nuclear factor kappa-B (NF-κB) kinase subunit beta (IKKß) to disrupt their inflammatory activation due to the significant hydrogen bonds and effective interactions with amino acid residues present in the target proteins' active sites. S.multicaulis is a rich natural source of the aromatic abietane diterpenoid, salvimulticanol, which exerted a strong anti-inflammatory effect through targeting iNOS and diminishing NO production in LPS-induced RAW264.7 cells in a mechanism that is dependent on the inhibition of TLR4-MD-2 and IKKß as activators of the classical NF-κB-mediated inflammatory pathway.

Photo-Physical Characteristics of Janus Green B in Different Solvents and its Interaction Mechanism with Silver Nanoparticles.

This work explores the effects of solvent polarity on Janus Green B (JGB) photophysical properties. The Lippert-Mataga, Billot, and Ravi equations were utilized to calculate the singlet-state excited dipole moments (µe) and ground state dipole moments (µg) using absorption and fluorescence spectra analyses. The results showed an increase in the former, which is suggestive of electronic structural alterations upon excitation. Analysis of fluorescence quantum yield values revealed that JGB's environment had an impact on its emission characteristics; it was particularly sensitive to silver nanoparticles, suggesting possible interactions. While simulations of electron density, electrostatic potential, and energy gap (Eg) helped to understand the electronic structure of JGB, theoretical absorption spectra produced by Time Dependent Density Function Theory (TD-DFT) calculations offered insights into electronic transitions during absorption. To sum up, the present study contributes to our comprehension of the molecular behavior of JGB in various solvents by elucidating the intricate relationship among solvent polarity, molecular environment, and interactions with silver nanoparticles. Additionally, theoretical computations support the interpretation of experimental results.

Wafer-scale development, characterization, and high temperature stabilization of epitaxial Cr2O3 films grown on Ru(0001).

This work outlines conditions suitable for the heteroepitaxial growth of Cr2O3(0001) films (1.5-20 nm thick) on a Ru(0001)-terminated substrate. Optimized growth is achieved by sputter deposition of Cr within a 4 mTorr Ar/O2 20% ambient at Ru temperatures ranging from 450 to 600 °C. The Cr2O3 film adopts a 30° rotated honeycomb configuration with respect to the underlying Ru(0001) substrate and exhibits a hexagonal lattice parameter consistent with that for bulk Cr2O3(0001). Heating to 700 °C within the same environment during film preparation leads to Ru oxidation. Exposure to temperatures at or above 400 °C in a vacuum, Ar, or Ar/H2 3% leads to chromia film degradation characterized by increased Ru 3d XPS intensity coupled with concomitant Cr 2p and O 1s peak attenuations when compared to data collected from unannealed films. An ill-defined but hexagonally well-ordered RuxCryOz surface structure is noted after heating the film in this manner. Heating within a wet Ar/H2 3% environment preserves the Cr2O3(0001)/Ru(0001) heterolayer structure to temperatures of at least 950 °C. Heating an Ru-Cr2O3-Ru heterostacked film to 950 °C within this environment is shown by cross-sectional scanning/transmission electron microscopy (S/TEM) to provide clear evidence of retained epitaxial bicrystalline oxide interlayer structure, interlayer immiscibility, and epitaxial registry between the top and bottom Ru layers. Subtle effects marked by O enrichment and O 1s and Cr 2p shifts to increased binding energies are noted by XPS in the near-Ru regions of Cr2O3(0001)/Ru(0001) and Ru(0001)/Cr2O3(0001)/Ru(0001) films after annealing to different temperatures in different sets of environmental conditions.

Association between lung function and dyspnoea and its variation in the multinational Burden of Obstructive Lung Disease (BOLD) study.

BACKGROUND: Dyspnoea is a common symptom of respiratory disease. However, data on its prevalence in general populations and its association with lung function are limited and are mainly from high-income countries. The aims of this study were to estimate the prevalence of dyspnoea across several world regions, and to investigate the association of dyspnoea with lung function. METHODS: Dyspnoea was assessed, and lung function measured in 25,806 adult participants of the multinational Burden of Obstructive Lung Disease study. Dyspnoea was defined as ≥2 on the modified Medical Research Council (mMRC) dyspnoea scale. The prevalence of dyspnoea was estimated for each of the study sites and compared across countries and world regions. Multivariable logistic regression was used to assess the association of dyspnoea with lung function in each site. Results were then pooled using random-effects meta-analysis. RESULTS: The prevalence of dyspnoea varied widely across sites without a clear geographical pattern. The mean prevalence of dyspnoea was 13.7 % (SD=8.2 %), ranging from 0 % in Mysore (India) to 28.8 % in Nampicuan-Talugtug (Philippines). Dyspnoea was strongly associated with both spirometry restriction (FVC

Association of Coagulopathy and Inflammatory Biomarkers with Severity in SARS-CoV-2-Infected Individuals of the Al-Qunfudhah Region of Saudi Arabia.

BACKGROUND: Identifying prognosticators/predictors of COVID-19 severity is the principal focus for early prediction and effective management of the disease in a time-bound and cost-effective manner. We aimed to evaluate COVID-19 severity-dependent alteration in inflammatory and coagulopathy biomarkers. METHODS: A hospital-dependent retrospective observational study (total: n = 377; male, n = 213; and female, n = 164 participants) was undertaken. COVID-19 exposure was assessed by performing real-time PCR on nasopharyngeal (NP) swabs. Descriptive and inferential statistics were applied for both continuous and categorical variables using Rstudio-version-4.0.2. Pearson correlation and regression were executed with a cut-off of p < 0.05 for evaluating significance. Data representation by R-packages and ggplot2. RESULTS: A significant variation in the mean ± SD (highly-sever (HS)/moderately severe (MS)) of CRP (HS/MS: 102.4 ± 22.9/21.3 ± 6.9, p-value < 0.001), D-dimer (HS/MS: 661.1 ± 80.6/348.7 ± 42.9, p-value < 0.001), and ferritin (HS/MS: 875.8 ± 126.8/593.4 ± 67.3, p-value < 0.001) were observed. Thrombocytopenia, high PT, and PTT exhibited an association with the HS individuals (p < 0.001). CRP was correlated with neutrophil (r = 0.77), ferritin (r = 0.74), and WBC (r = 0.8). D-dimer correlated with platelets (r = -0.82), PT (r = 0.22), and PTT (r = 0.37). The adjusted odds ratios (Ad-OR) of CRP, ferritin, D-dimer, platelet, PT, and PTT for HS compared to MS were 1.30 (95% CI -1.137, 1.50; p < 0.001), 1.048 (95% CI -1.03, 1.066; p < 0.001), 1.3 (95% CI -1.24, 1.49, p > 0.05), -0.813 (95% CI -0.734, 0.899, p < 0.001), 1.347 (95% CI -1.15, 1.57, p < 0.001), and 1.234 (95% CI -1.16, 1.314, p < 0.001), respectively. CONCLUSION: SARS-CoV-2 caused alterations in vital laboratory parameters and raised ferritin, CRP, and D-dimer presented an association with disease severity at a significant level.

Effect of Nutrition and Behavior Modification Program (NBMP) on maternal and neonatal outcomes among hyperglycemic mothers.

OBJECTIVE: Hyperglycemic mothers and their offspring are at increased risk of various maternal and neonatal complications such as macrosomia, future type 2 diabetes, and metabolic abnormalities. Early diagnosis and individualized dietary management, exercise, and emotional well-being are expected to reduce these risks. The study aims to identify the effect of the Nutrition and Behavior Modification Program (NBMP) on maternal and neonatal outcomes of hyperglycemic mothers. PATIENTS AND METHODS: A pre-experimental study was performed among 89 hyperglycemic mothers. Glycemic control at 28 and 36 weeks, weight gain during pregnancy, pre-eclampsia, pregnancy-induced hypertension (PIH), mode of delivery, duration of exercise, emotional well-being, neonates' birth weight, incidence of hypoglycemia, and NICU admission were compared among the study and control groups. The intervention group received an individualized NBMP from their diagnosis of hyperglycemia until delivery. RESULTS: The results showed a significant difference in blood glucose between the study periods and groups at p<0.05 as per repeated ANOVA. Also, diet scores had a significant influence on BMI and glycemic control at p<0.05. Logistic regression models, adjusted for potential confounders including baseline blood glucose, age, economic status, previous GDM, family history of DM as well as baseline BMI, diet score, physical activity, and maternal well-being score, indicated that the NBMP reduced the blood glucose and BMI significantly at p<0.05 in the study group. NBMP also reduced the risk of SGA/LGA and preterm/post-mature birth, as well as increased the exercise duration and emotional well-being of mothers. CONCLUSIONS: The study's conclusions draw attention to the possible roles that maternal wellness, physical activity, and diet may have in reducing risks for both hyperglycemic mothers and their newborns. The NBMP resulted in higher adherence to lifestyle changes. Further research on a larger sample of hyperglycemic mothers is recommended to expand the generalizability of the findings.

Intravenous iron for acute and chronic heart failure with reduced ejection fraction (HFrEF) patients with iron deficiency: An updated systematic review and meta-analysis.

Patients with heart failure (HF) and iron deficiency are at increased risk of adverse clinical outcomes. We searched databases for randomised controlled trials that compared IV iron to placebo, in patients with HF with reduced ejection fraction (HFrEF). A total of 7,813 participants, all having HFrEF with 3,998 receiving IV iron therapy, and 3,815 control recipients were included. There was a significant improvement in Kansas City Cardiomyopathy Questionnaire favouring IV iron with MD 7.39, 95% CI [3.55, 11.22], p = 0.0002. Subgroup analysis, based on acute and chronic HF, has displayed a sustained statistical significance. Additionally, a significant increase in the left ventricular ejection fraction % was observed, with MD 3.76, 95% CI [2.32, 5.21], p < 0.00001. A significant improvement in 6-min walk test was noted, with MD 34.87, 95% CI [20.02, 49.72], p < 0.00001. Furthermore, IV iron showed significant improvement in NYHA class, peak VO2, serum ferritin, and haemoglobin levels. Finally, despite the lack of difference in terms of all-cause hospitalisation and HF-related death, IV iron was associated with a significant reduction in HF-related, any cardiovascular reason hospitalisations, and all-cause death; which supports the need for implementation of IV iron as a standard of care in patients with HF and iron deficiency.

A novel approach to designing viral precision vaccines applied to SARS-CoV-2.

Efficient precision vaccines against several highly pathogenic zoonotic viruses are currently lacking. Proteolytic activation is instrumental for a number of these viruses to gain host-cell entry and develop infectivity. For SARS-CoV-2, this process is enhanced by the insertion of a furin cleavage site at the junction of the spike protein S1/S2 subunits upstream of the metalloprotease TMPRSS2 common proteolytic site. Here, we describe a new approach based on specific epitopes selection from the region involved in proteolytic activation and infectivity for the engineering of precision candidate vaccinating antigens. This approach was developed through its application to the design of SARS-CoV-2 cross-variant candidates vaccinating antigens. It includes an in silico structural analysis of the viral region involved in infectivity, the identification of conserved immunogenic epitopes and the selection of those eliciting specific immune responses in infected people. The following step consists of engineering vaccinating antigens that carry the selected epitopes and mimic their 3D native structure. Using this approach, we demonstrated through a Covid-19 patient-centered study of a 500 patients' cohort, that the epitopes selected from SARS-CoV-2 protein S1/S2 junction elicited a neutralizing antibody response significantly associated with mild and asymptomatic COVID-19 (p<0.001), which strongly suggests protective immunity. Engineered antigens containing the SARS-CoV-2 selected epitopes and mimicking the native epitopes 3D structure generated neutralizing antibody response in mice. Our data show the potential of this combined computational and experimental approach for designing precision vaccines against viruses whose pathogenicity is contingent upon proteolytic activation.

Defining criteria for disease activity states in systemic juvenile idiopathic arthritis based on the systemic Juvenile Arthritis Disease Activity Score.

OBJECTIVE: To develop and validate cutoff values in the systemic Juvenile Arthritis Disease Activity Score 10 (sJADAS10) that distinguish the states of inactive disease (ID), minimal disease activity (MiDA), moderate disease activity (MoDA), and high disease activity (HDA) in children with systemic juvenile idiopathic arthritis (sJIA), based on subjective disease state assessment by the treating pediatric rheumatologist. METHODS: The cutoffs definition cohort was composed of 400 patients enrolled at 30 pediatric rheumatology centers in 11 countries. Using the subjective physician rating as an external criterion, 6 methods were applied to identify the cutoffs: mapping, calculation of percentiles of cumulative score distribution, Youden index, 90% specificity, maximum agreement, and ROC curve analysis. Sixty percent of the patients were assigned to the definition cohort and 40% to the validation cohort. Cutoff validation was conducted by assessing discriminative ability. RESULTS: The sJADAS10 cutoffs that separated ID from MiDA, MiDA from MoDA, and MoDA from HDA were ≤ 2.9, ≤ 10, and > 20.6. The cutoffs discriminated strongly among different levels of pain, between patients with or without morning stiffness, and between patients whose parents judged their disease status as remission or persistent activity/flare or were satisfied or not satisfied with current illness outcome. CONCLUSION: The sJADAS cutoffs revealed good metrologic properties in both definition and validation cohorts, and are therefore suitable for use in clinical trials and routine practice.

Risk Factors for Chronic Abdominal Pain After RYGB: Are Patients Adequately Selected Beforehand?

PURPOSE: Chronic abdominal pain after RYGB is a known issue. Identifying the potential patient-related and modifiable risk factors might contribute to diminish the risk for this undesirable outcome. METHODS: A single-center retrospective cohort study with prospective data collection was conducted with inclusion of all patients who underwent RYGB surgery between 2015 and 2021. Data from the NBSR and medical records were used. Patients with chronic abdominal pain were defined when pain lasting or recurring for more than 3 to 6 months. RESULTS: Six hundred sixty-four patients who underwent RYGB surgery were included with a median follow-up of 60.5 months. Forty-nine patients (7.3%) presented with chronic abdominal pain. Postoperative complications (OR 13.376, p = 0.020) and diagnosis of depression (OR 1.971, p = 0.037) were associated with developing abdominal pain. On the other hand, ex-smokers (OR 0.222, p = 0.040) and older age (0.959, p = 0.004) presented as protective factors. CONCLUSION: Postoperative complications and diagnosis of depression are risk factors for chronic pain after RYGB. The role of the bariatric MDT remains crucial to select these patients adequately beforehand.

Molecular networking-guided investigation of the secondary metabolome of four Morus species and their in vivo neuroprotective potential for the mitigation of Alzheimer's disease.

Alzheimer's Disease (AD) is a fatal age-related neurodegenerative condition with a multifactorial etiology contributing to 70% of dementia globally. The search for a multi-target agent to hit different targets involved in the pathogenesis of AD is crucial. In the present study, the neuroprotective effects of four Morus extracts were assessed in LPS-induced AD in mice. Among the studied species, M. macroura exhibited a profound effect on alleviating the loss of cognitive function, improved the learning ability, restored the acetylcholine esterase (AChE) levels to normal, and significantly reduced the tumor necrosis factor alpha (TNF-α) brain content in LPS-treated mice. To investigate the secondary metabolome of the studied Morus species, ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-HRMS/MS), aided with feature-based molecular networking, was employed. Among the annotated features, aryl benzofurans and prenylated flavonoids were suggested as being responsible for the observed neuroprotective effect. Furthermore, some of the detected metabolites were proposed as new natural products such as moranoline di-O-hexoside (1), isomers of trimethoxy-dihydrochalcone-O-dihexoside (59 & 76), (hydroxy-dimethoxyphenyl)butenone-O-hexoside (82), and O-methylpreglabridin-O-sulphate (105). In conclusion, our findings advocate the potential usage of M. macroura leaves for the management of AD, yet after considering further clinical trials.

Physical characterization, biocompatibility, and antimicrobial activity of polyvinyl alcohol/sodium alginate blend doped with TiO2 nanoparticles for wound dressing applications.

The ability of wound dressing materials to tackle skin pathogens colonization that is associated with open wound infections is limited. Recently, green-synthesized metal oxide nanoparticles has received a lot of attention to overcome this limitation. However, titanium dioxide nanoparticles (TiO2-NPs) exhibit exceptional antibacterial properties. In this work, several concentrations (0, 1, 3, and 5 wt.%) of TiO2 NPs prepared using Aloe vera leaf extract were added to a blend of polyvinyl alcohol and sodium alginate (PVA:SA). This nanocomposite was designed to enhance the healing process of wounds. The interaction between the PVA:SA composite and the TiO2 NPs was confirmed by FTIR. The thermal behavior of the nanocomposite films was investigated using DSC and TGA. The experimental results indicate that the glass transition temperatures of the nanocomposites increased by increasing the added amount of TiO2 NPs to be 53.7 °C (1 wt.%), 55.8 °C (3 wt.%), and 60.6 °C (5 wt.%), which were consistently lower than the glass transition temperature of the matrix material (69.6 °C). The Dynamic Mechanical Analysis was examined. The nanocomposite doped with 5 wt.% of TiO2 NPs detected a high storage modulus (21.6 × 108). Based on swelling and degradation studies, the prepared PVA:SA:TiO2 nanocomposite films have an excellent swelling rate, and the inclusion of TiO2 NPs increases the stability of the polymeric matrix. The PVA:SA:TiO2 nanocomposite films exhibited a superior antibacterial efficacy against Gram-positive bacteria such as Bacillus cereus and Staphylococcus aureus, compared to their effectiveness against Gram-negative bacteria like Escherichia coli. Moreover, the nanocomposite films were biocompatible with Human Skin Fibroblast. Therefore, the developed PVA:SA:TiO2 nanocomposite films suit wound dressing applications.

Exploring biosurfactant from Halobacterium jilantaiense as drug against HIV and zika virus: fabrication, characterization, cytosafety property, molecular docking, and molecular dynamics simulation.

Biosurfactants are surface-active molecules with unique qualities and various uses. Many microorganisms produce secondary metabolites with surface-active characteristics that serve various antiviral functions. The HIV and Zika viruses were chosen for this study because they can spread from mother to child and result in potentially fatal infections in infants. Halophilic bacteria from the Red Sea solar saltern in Egypt were screened using drop collapse, emulsification activity, and oil displacement assays to produce biosurfactants and emulsifiers. Halobacterium jilantaiense strain JBS1 was the most effective strain of the Halobacteriaceae family. It had the best oil displacement test and emulsification activity against kerosene and crude oil, respectively. Among the ten isolates, it produced the most promising biosurfactant, also recognized by the GC-MASS library. This study evaluated biosurfactants from halophilic bacteria as potential antiviral drugs. Some of the computer methods we use are molecular docking, ADMET, and molecular dynamics. We use model organisms like the HIV reverse transcriptase (PDB: 5VZ6) and the Zika virus RNA-dependent RNA polymerase (ZV-RdRP). Molecular docking and molecular dynamics make the best complexes with 5VZ6 HIV-RT and flavone (C25) and 5wz3 ZV-RdRP and ethyl cholate (C8). Testing for ADMET toxicity on the complex revealed that it is the safest medicine conceivable. The 5VZ6-C25 and 5wz3-C8 complexes also followed the Lipinski rule. They made five hydrogen bond donors and ten hydrogen bond acceptors with 500 Da MW and a 5:1 octanol/water partition coefficient. Finally, extreme settings require particular adaptations for stability, and extremophile biosurfactants may be more stable.

Effect of Surface Functional Groups on the Electronic Behavior and Optical Spectra of Mn2N Based MXenes.

The extensive applications of MXenes, a novel type of layered materials known for their favorable characteristics, have sparked significant interest. This research focuses on investigating the influence of surface functionalization on the behavior of Mn2NTx (Tx=O2, F2) MXenes monolayers using the "Density functional theory (DFT) based full-potential linearized augmented-plane-wave (FP-LAPW)" method. We elucidate the differences in the physical properties of Mn2NTx through the influence of F and O surface functional groups. We found that O-termination results in half-metallic behavior, whereas the F-termination evolves metallic characteristics within these MXene systems. Similarly, surface termination has effectively influenced their optical absorption efficiency. For instance, Mn2NO2 and Mn2NF2 effectively absorb UV light ~50.15×104 cm-1 and 37.71×104 cm-1, respectively. Additionally, they demonstrated prominent refraction and reflection characteristics, which are comprehensively discussed in the present work. Our predictions offer valuable perspectives into the optical and electronic characteristics of Mn2NTx-based MXenes, presenting the promising potential for implementing them in diverse optoelectronic devices.