Focused ion beam lithography for position-controlled nanowire growth.

To exploit the promising properties of semiconductor nanowires and ensure the uniformity required to achieve device integration, their position on the growth substrate must be controlled. This work demonstrates the direct patterning of a SiO2/Si substrate using focused ion beam (FIB) patterning to control self-catalyzed GaAsSb nanowire growth in molecular beam epitaxy (MBE). Besides position control, FIB patterning parameters influence nanowire yield, composition and structure. Total ion dose per hole is found to be the most important parameter. Yield of single nanowires ranges from ≈34% to ≈83%, with larger holes dominated by multiple nanowires per hole. Areas exposed to low ion beam doses are selectively etched by routine pre-MBE HF cleaning, enabling patterning and nanowire nucleation with minimal damage to the Si substrate. The optical and electronic properties of nanowires are found to depend on the ion dose used during patterning, indicating the potential for FIB patterning to tune nanowire properties. These findings demonstrate the possibility for a FIB lithography protocol which could provide a rapid and direct patterning process for flexible controlled nanowire growth.

Epitaxially grown III-arsenide-antimonide nanowires for optoelectronic applications.

Epitaxially grown ternary III-arsenide-antimonide (III-As-Sb) nanowires (NWs) are increasingly attracting attention due to their feasibility as a platform for the integration of largely lattice-mismatched antimonide-based heterostructures while preserving the high crystal quality. This and the inherent bandgap tuning flexibility of III-As-Sb in the near- and mid-infrared wavelength regions are important and auspicious premises for a variety of optoelectronic applications. In this review, we summarize the current understanding of the nucleation, morphology-change and crystal phase evolution of GaAsSb and InAsSb NWs and their characterization, especially in relation to Sb incorporation during growth. By linking these findings to the optical properties in such ternary NWs and their heterostructures, a brief account of the ongoing development of III-As-Sb NW-based photodetectors and light emitters is also given.

GaN/AlGaN Nanocolumn Ultraviolet Light-Emitting Diode Using Double-Layer Graphene as Substrate and Transparent Electrode.

The many outstanding properties of graphene have impressed and intrigued scientists for the last few decades. Its transparency to light of all wavelengths combined with a low sheet resistance makes it a promising electrode material for novel optoelectronics. So far, no one has utilized graphene as both the substrate and transparent electrode of a functional optoelectronic device. Here, we demonstrate the use of double-layer graphene as a growth substrate and transparent conductive electrode for an ultraviolet light-emitting diode in a flip-chip configuration, where GaN/AlGaN nanocolumns are grown as the light-emitting structure using plasma-assisted molecular beam epitaxy. Although the sheet resistance is increased after nanocolumn growth compared with pristine double-layer graphene, our experiments show that the double-layer graphene functions adequately as an electrode. The GaN/AlGaN nanocolumns are found to exhibit a high crystal quality with no observable defects or stacking faults. Room-temperature electroluminescence measurements show a GaN related near bandgap emission peak at 365 nm and no defect-related yellow emission.

Single-Mode Near-Infrared Lasing in a GaAsSb-Based Nanowire Superlattice at Room Temperature.

Semiconductor nanowire lasers can produce guided coherent light emission with miniaturized geometry, bringing about new possibilities for a variety of applications including nanophotonic circuits, optical sensing, and on-chip and chip-to-chip optical communications. Here, we report on the realization of single-mode and room-temperature lasing from 890 to 990 nm, utilizing a novel design of single nanowires with GaAsSb-based multiple axial superlattices as a gain medium under optical pumping. The control of lasing wavelength via compositional tuning with excellent room-temperature lasing performance is shown to result from the unique nanowire structure with efficient gain material, which delivers a low lasing threshold of ∼6 kW/cm2 (75 µJ/cm2 per pulse), a lasing quality factor as high as 1250, and a high characteristic temperature of ∼129 K. These results present a major advancement for the design and synthesis of nanowire laser structures, which can pave the way toward future nanoscale integrated optoelectronic systems with superior performance.

A story told by a single nanowire: optical properties of wurtzite GaAs.

The optical properties of the wurtzite (WZ) GaAs crystal phase found in nanowires (NWs) are a highly controversial topic. Here, we study high-quality pure WZ GaAs/AlGaAs core-shell NWs grown by Au-assisted molecular beam epitaxy (MBE) with microphotoluminescence spectroscopy (µ-PL) and (scanning) transmission electron microscopy on the very same single wire. We determine the room temperature (294 K) WZ GaAs bandgap to be 1.444 eV, which is ∼20 meV larger than in zinc blende (ZB) GaAs, and show that the free exciton emission at 15 K is at 1.516 eV. On the basis of time- and temperature-resolved µ-PL results, we propose a Γ(8) conduction band symmetry in WZ GaAs. We suggest a method for quantifying the optical quality of NWs, taking into consideration the difference between the room and low temperature integrated PL intensity, and demonstrate that Au-assisted GaAs/AlGaAs core-shell NWs can have high PL brightness up to room temperature.

Engineering parallel and perpendicular polarized photoluminescence from a single semiconductor nanowire by crystal phase control.

We report on a crystal phase-dependent photoluminescence (PL) polarization effect in individual wurtzite GaAs nanowires with a zinc blende GaAsSb insert grown by Au-assisted molecular beam epitaxy. The PL emission from the zinc blende GaAsSb insert is strongly polarized along the nanowire axis while the emission from the wurtzite GaAs nanowire is perpendicularly polarized. The results indicate that the crystal phases, through optical selection rules, are playing an important role in the alignment of the PL polarization in nanowires besides the linear polarization induced by the dielectric mismatch. The strong excitation power dependence and long recombination lifetimes ( approximately 4 ns) from the wurtzite GaAs and zinc blende GaAsSb-related PL emission strongly indicate the existence of type II band alignments in the nanowire due to the presence of nanometer thin zinc blende segments and stacking faults in the wurtzite GaAs barrier.

Plasmon microscopy and imaging ellipsometry of Artrobacter oxydans attached on polymer films.

The attachment of Artrobacter oxydans 1,388 on a newly synthesized biodegradable copolymer of poly-(hexanlactam)-co-block-poly-(delta-valerolactone) is investigated by optical, microscopic and biochemical methods. The potentials of surface plasmon microscopy and imaging ellipsometry for detecting microorganisms when Al films are used to excite plasmons is assessed by comparing images obtained by these methods with dark field microscopy pictures. The experimental results demonstrate that in this case imaging ellipsometry and plasmon microscopy in transmission are promising methods and can be used in optical sensors for monitoring cell adhesion.