Aligned 1-D nanorods of a π-gelator exhibit molecular orientation and excitation energy transport different from entangled fiber networks.

Linear π-gelators self-assemble into entangled fibers in which the molecules are arranged perpendicular to the fiber long axis. However, orientation of gelator molecules in a direction parallel to the long axes of the one-dimensional (1-D) structures remains challenging. Herein we demonstrate that, at the air-water interface, an oligo(p-phenylenevinylene)-derived π-gelator forms aligned nanorods of 340 ± 120 nm length and 34 ± 5 nm width, in which the gelator molecules are reoriented parallel to the long axis of the rods. The orientation change of the molecules results in distinct excited-state properties upon local photoexcitation, as evidenced by near-field scanning optical microscopy. A detailed understanding of the mechanism by which excitation energy migrates through these 1-D molecular assemblies might help in the design of supramolecular structures with improved charge-transport properties.

Facile fabrication of silver nanoclusters as promising surface-enhanced Raman scattering substrates.

We present a simple wet chemical method to make thin film of silver nanoclusters on glass or silicon substrate. The method includes immersion of glass or silicon substrate into a saturated solution of silver nitrate in n-octanol. After 24 h, thin film of silver nanoclusters, which are micrometer-scale aggregates of silver nanoparticles with average size in the range of 80-100 nm, are formed on the substrate. The film is characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and UV-Vis spectroscopy. Potential use of the Ag nanoclusters as a surface-enhanced Raman scattering based sensing platform is demonstrated by measuring increased Raman signals from organic molecule adsorbed on the Ag nanoparticle clusters.

Hydrogen-bond-driven 'homogeneous intercalation' for rapid, reversible, and ultra-precise actuation of layered clay nanosheets.

The use of hydrogen bonds permits a fluidic motion of differently sized alcohol molecules across the interlayer gap in LDH, which enables rapid and reversible tuning of interlayer spacing of the LDH at sub-Ångström precision by changing the mole ratio of the different alcohols.

Langmuir nanoarchitectonics: one-touch fabrication of regularly sized nanodisks at the air-water interface.

In this article, we propose a novel methodology for the formation of monodisperse regularly sized disks of several nanometer thickness and with diameters of less than 100 nm using Langmuir monolayers as fabrication media. An amphiphilic triimide, tri-n-dodecylmellitic triimide (1), was spread as a monolayer at the air-water interface with a water-soluble macrocyclic oligoamine, 1,4,7,10-tetraazacyclododecane (cyclen), in the subphase. The imide moieties of 1 act as hydrogen bond acceptors and can interact weakly with the secondary amine moieties of cyclen as hydrogen bond donors. The monolayer behavior of 1 was investigated through π-A isotherm measurements and Brewster angle microscopy (BAM). The presence of cyclen in the subphase significantly shifted isotherms and induced the formation of starfish-like microstructures. Transferred monolayers on solid supports were analyzed by reflection absorption FT-IR (FT-IR-RAS) spectroscopy and atomic force microscopy (AFM). The Langmuir monolayer transferred onto freshly cleaved mica by a surface touching (i.e., Langmuir-Schaefer) method contained disk-shaped objects with a defined height of ca. 3 nm and tunable diameter in the tens of nanometers range. Several structural parameters such as the disk height, molecular aggregation numbers in disk units, and 2D disk density per unit surface area are further discussed on the basis of AFM observations together with aggregate structure estimation and thermodynamic calculations. It should be emphasized that these well-defined structures are produced through simple routine procedures such as solution spreading, mechanical compression, and touching a substrate at the surface. The controlled formation of defined nanostructures through easy macroscopic processes should lead to unique approaches for economical, energy-efficient nanofabrication.

Controlling porphyrin nanoarchitectures at solid interfaces.

Two complementary examples of porphyrin nanoarchitectonics are presented. The fabrication of binary molecular monolayers using two different porphyrin molecules, tetrakis(3,5-di-t-butyl-4-hydroxyphenyl)porphyrin (1) and tetrakis(4-pyridyl)porphyrin (2), by deposition in ultrahigh vacuum was demonstrated. Two unusual heteromolecular monolayer structures were observed, with one exhibiting good separation of 1 molecules within the monolayer. Also, a synthetic nanoarchitectonic approach was used to prepare self-assembled molecular nanowires at a mica substrate. The nanowires could be observed to grow using atomic force microscopy (AFM), and the network structures of the nanowires could be influenced by manipulation using the AFM probe tip.

Paradigm shift from self-assembly to commanded assembly of functional materials: recent examples in porphyrin/fullerene supramolecular systems.

Current nanotechnology based on top-down nanofabrication may encounter a variety of drawbacks in the near future so that development of alternative methods, including the so-called bottom-up approach, has attracted considerable attention. However, the bottom-up strategy, which often relies on spontaneous self-assembly, might be inefficient in the development of the requisite functional materials and systems. Therefore, assembly processes controlled by external stimuli might be a plausible strategy for the development of bottom-up nanotechnology. In this review, we demonstrate a paradigm shift from self-assembly to commanded assembly by describing several examples of assemblies of typical functional molecules, i.e. porphyrins and fullerenes. In the first section, we describe recent progress in the design and study of self-assembled and co-assembled supramolecular architectures of porphyrins and fullerenes. Then, we show examples of assembly induced by external stimuli. We emphasize the paradigm shift from self-assembly to commanded assembly by describing the recently developed electrochemical-coupling layer-by-layer (ECC-LbL) methodology.

Anchoring of self-assembled monolayers of unsymmetrically-substituted chromophores with an oxoporphyrinogen surface clamp.

Multichromophoric molecules of conjugated N-substituted oxoporphyrinogens have been assembled on the Au(111) surface using solution and sublimation techniques. The operation of the oxoporphyrinogen moiety as a surface anchoring unit in the formation of molecular monolayers has been demonstrated.

Electrochemical-coupling layer-by-layer (ECC-LbL) assembly.

Electrochemical-coupling layer-by-layer (ECC-LbL) assembly is introduced as a novel fabrication methodology for preparing layered thin films. This method allows us to covalently immobilize functional units (e.g., porphyrin, fullerene, and fluorene) into thin films having desired thicknesses and designable sequences for both homo- and heteroassemblies while ensuring efficient layer-to-layer electronic interactions. Films were prepared using a conventional electrochemical setup by a simple and inexpensive process from which various layering sequences can be obtained, and the photovoltaic functions of a prototype p/n heterojunction device were demonstrated.

Self-assembled pyrazinacene nanotubes.

Nanotubes of a pentacene derivative, 6,13-bis(1-n-dodecyl)-[a,c,l,n]-tetrabenzo-5,6,7,12,13,14-hexaazapentacene, have been prepared by a hierarchical self-assembly mechanism. The oligoazaacenes 1-3, referred to as pyrazinacenes due to their structures of linearly fused pyrazine heterocycles, can also be considered as two azatriphenylenes fused through a reduced pyrazine ring. Dissolution of 6,13-bis(1-n-dodecyl)-[a,c,l,n]-tetrabenzo-5,6,7,12,13,14-hexaaza pentacene in nearly boiling toluene followed by standing of the solution at room temperature yields self-assembled (sa) pyrazinacene (Pa) nanotubes (NT's), or sa-PaNTs. Self-assembled-PaNTs are formed after initial aggregation of the pyrazinacene giving a 130-nm-wide 2-dimensional tape followed by helical twisting of this tape into a hollow cylindrical form of 150-200 nm diameter which can exceed 10 µm in length. The morphologies of the tape and nanotube structures were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and electron absorption spectroscopy (UV/Vis). The latter indicates that the tubes may be formed by chromophore J-aggregation. Also, high resolution TEM of the tubes reveals that they can be composed of several tapes while powder X-ray diffraction revealed the lamellar structure of the tapes composing the tubes.

Real time self-assembly and reassembly of molecular nanowires of trigeminal amphiphile porphyrins.

Self-assembly and reassembly of high aspect ratio nanowires of trigeminal porphyrins and their manipulation using an atomic force microscope (AFM) is reported.

Block-copolymer-nanowires with nanosized domain segregation and high charge mobilities as stacked p/n heterojunction arrays for repeatable photocurrent switching.

Development of materials for efficient photoenergy conversion is a subject of critical importance in current science and technology. Efficient performance requires well-controlled segregation of electron donor and acceptor moieties, which we have achieved using block copolymers of tetraphenylporphinatozinc(II) (donor) and C(60) fullerene (acceptor) using living ring-opening metathesis polymerization (ROMP). The resulting amphiphilic ROMP block copolymers undergo self-assembly into nanostructured phase-segregated 1-dimensional nanowires with an approximately 5.5 nm periodicity zebra-stripe-like morphology simply by drop-casting solutions of the polymers onto a substrate such as mica or highly oriented pyrolytic graphite (HOPG). Thin films of the self-assembled nanophase-segregated copolymers exhibit high charge carrier mobilities (approximately 0.26 cm(2) V(-1) s(-1)) and electrical conductivities (up to 6.4 x 10(-4) cm(2) V(-1) s(-1)) as well as highly repeatable photocurrent switching with rapid ON/OFF responses upon white light irradiation.

Evidence for a ball-shaped cyclen cyclophane: an experimental and first principles study.

Conformational isomerism of a ball-shaped cyclophane of cyclen was studied using NMR and computational methods with the most notable conformer containing a highly symmetric cyclic benzene tetramer.

Diverse self-assembly in soluble oligoazaacenes: a microscopy study.

The synthesis and morphologies of self-assembled aggregates of novel oligoazapentacene 2 and oligoazaheptacene 3 derivatives are reported. Double nucleophilic substitution on 2,3-dicyano-[h,j]-dibenzo-1,4,5,10-tetrazaanthracene 4 gives the corresponding dihydro-oligoacene derivatives, which were then N-alkylated using n-dodecyl bromide to yield self-assembling acene molecules. 2 and 3 self-assemble in solution, leading to a variety of aggregated structures including rolled-up sheets, foams, and fibrous structures reminiscent of organogels. These structures are of substantial interest because of their potential electronic properties and because individual fibers can be "exfoliated". Structures of the aggregates are discussed. Additionally, the crystal structure of precursor 4 is reported because it gives information regarding the intermolecular interactions (hydrogen bonding and intermolecular stacking) in similar compounds. Crystal data for 4: space group P2(1)/n, a = 9.3164(17) angstroms, b = 7.0649(13) angstroms, c = 23.684(4) angstroms, alpha = 90.00 degrees, beta = 99.945(3) degrees, gamma = 90.00 degrees, and V = 1535.4(5) angstroms3.