Revision total knee replacement finances: a detailed cost-analysis of operative practice at a regional tertiary referral centre.

BACKGROUND: The revision knee complexity classification (RKCC) stratifies knee revision operations depending on their level of complexity from simple revisions (R1) to highly complex cases (R3). Current financial codes used for calculation of reimbursement for knee revision services provided at the Trust, rely on patients' comorbidities. However, previous research has demonstrated that this approach may not yield an accurate financial account of knee revision arthroplasty cost. This is a single centre study from a secondary and tertiary revision unit, with work previously presented by the authors demonstrating that the majority of complex revision knee replacement within the region, take place in this unit. The aims of this study were to illustrate the current cost profile and renumeration service currently in place for revision knee and show the differences in cost based on complexity of the operation. METHODS: In this retrospective study, 90 cases who underwent revision knee operations in 2019 were analysed. Data was obtained from a tertiary referral centre where the episodes had occurred. Mean cost, tariff, and subsequent deficit were calculated for the R1, R2 and R3 episodes. RESULTS: R2 and R3 episodes were significantly more expensive than R1 episodes. The increase in cost between R3 and R2 episodes was not significant. The total cost of the revision operations was £1,162,343. Tariffs received for R2 and R3 revision operations were significantly more expensive than R1 operations. However, the increase in tariffs received for R3 operations was not significant in relation to R2 operations. The total amount of tariffs received by the Trust was £ 770,996 generating a net deficit of - £ 391,347. CONCLUSION: Current financial coding for revision knee does not accurately predict costs associated with revision knee surgery. Net deficit varies depending on the RKCC grade of the knee revision episode with more complex operations resulting in a higher mean net deficit. Implementation of the RKCC could prove to be a useful tool in generating an accurate prediction of the cost associated with knee revision surgery.

Revision Total Knee Arthroplasty Using an Uncemented Metaphyseal Sleeve, Rotating Hinge Prosthesis: A Case Series of 99 Patients.

BACKGROUND: Hinge knee replacement is a salvage procedure with historically high failure and complication rates. We aim to analyze the use of an uncemented metaphyseal sleeve revision knee replacement in our unit-a third-generation rotating hinge knee prosthesis. This is the largest reported series of this implant with longest follow up. METHODS: We retrospectively identified 99 revision cases performed (2002-2018). In total, 67 of 99 (68%) cases were performed for aseptic etiology, whereas 32 of 99 (32%) cases were performed for infection. Clinical outcomes were assessed using the Oxford Knee Score, survivorship analysis, and incidence of revision/reoperations. Mean follow-up was 7 years (range 1.5-18). RESULTS: At follow-up, the mean Oxford Knee Score had improved from 10 points to 25 points. At mean 7 years of follow up, 18 of 99 cases had undergone revision giving a survivorship of 81% (90% aseptic). In total, 10 of 18 cases were performed for infection (10%) and 9 of 18 cases were performed for aseptic reasons (9%), of which 5 were for patella resurfacing (2 revision), 2 for failure of bony ingrowth, and 1 for fracture. Twenty-six patients (26%) had complications postoperatively, with patella disorders and reduced range of movement the most common. Patients who did not undergo patella resurfacing were significantly more likely to need revision of any cause (P = .01). CONCLUSION: This is the largest study of this prosthesis with longest follow-up. It demonstrates good survivorship and improvement in knee pain. Those with infection are at greatest risk of revision. Significant numbers have patella dysfunction/anterior knee symptoms therefore patella resurfacing should be considered when using this implant. LEVEL OF EVIDENCE: IV.

Combined two-centre experience of single-entry telescopic rods identifies characteristic modes of failure.

AIMS: The Fassier Duval (FD) rod is a third-generation telescopic implant for children with osteogenesis imperfecta (OI). Threaded fixation enables proximal insertion without opening the knee or ankle joint. We have reviewed our combined two-centre experience with this implant. METHODS: In total, 34 children with a mean age of five years (1 to 14) with severe OI have undergone rodding of 72 lower limb long bones (27 tibial, 45 femoral) for recurrent fractures with progressive deformity despite optimized bone health and bisphosphonate therapy. Data were collected prospectively, with 1.5 to 11 years follow-up. RESULTS: A total of 24 patients (33%) required exchange of implants (14 femora and ten tibiae) including 11 rods bending with refracture. Four (5%) required reoperation with implant retention. Loss of proximal fixation in the femur and distal fixation in the tibia were common. Four patients developed coxa vara requiring surgical correction. In total, 13 patients experienced further fractures without rod bending; eight required implant revision. There was one deep infection. The five-year survival rate, with rod revision as the endpoint, was 63% (95% confidence interval (CI) 44% to 77%) for femoral rods, with a mean age at implantation of 4.8 years (1.3 to 14.8), and 64% (95% CI 36% to 82%) for tibial rods, with a mean age at implantation of 5.2 years (2.0 to 13.8). CONCLUSION: FD rods are easier to implant but do not improve on the revision rates reported for second generation T-piece rods. Proximal femoral fixation is problematic in younger children with a partially ossified greater trochanter. Distal tibial fixation typically fails after two years. Future generation implants should address proximal femoral and distal tibial fixation to avoid the majority of complications in this series. Cite this article: Bone Joint J 2020;102-B(8):1048-1055.

Percutaneous repair followed by accelerated rehabilitation for acute Achilles tendon ruptures.

PURPOSE: To evaluate the outcome after percutaneous repair followed by accelerated rehabilitation for acute Achilles tendon ruptures. METHODS: 21 men and 9 women (mean age, 41 years) underwent percutaneous repair by a single senior surgeon for acute Achilles tendon ruptures, followed by early weight bearing and accelerated rehabilitation. Outcome measures included the Achilles tendon re-rupture rate, the Achilles tendon total rupture score (ATRS) at 3 and 6 months, the incidence of sural nerve injury, wound infection, wound dehiscence, patient satisfaction, and the time to return to pre-rupture activity. RESULTS: The mean follow-up period was 12.5 months. The mean ATRS score improved from 57.65 at 3 months to 86.95 at 6 months (p<0.001). No patient had intra-operative complications, tendon re-rupture, sural nerve injury, wound dehiscence, or deep infection. Two patients developed a superficial wound infection, which was resolved with oral flucloxacillin. Two patients had a mass at the transverse incision, but neither had any symptoms or functional restriction. All patients were able to bear full weight comfortably without the walker boot at 8 weeks, and return to their work by 3 months. The mean time to return to pre-rupture activity, including sports, was 10.4 months. The mean satisfaction rate was 87% at 6 months. CONCLUSION: Percutaneous repair of the Achilles tendon followed by early weight bearing and accelerated rehabilitation achieves good functional outcome.

Polyaxial versus uniaxial volar locking plate for distal radial fractures.

PURPOSE: To compare the penetration of the distal screws in relation to the thickness of the distal metaphysis in the polyaxial versus uniaxial volar locking plates. METHODS: Records of 78 patients aged 16 to 79 years who underwent open reduction and internal fixation for distal radial fractures (n=81) were reviewed. All fracture subtypes were included. 20 men and 22 women aged 18 to 79 (mean, 50) years were treated with the uniaxial locking plate, whereas 15 men and 21 women aged 16 to 79 (mean, 51) years were treated with the polyaxial locking plate. The choice of plate was determined by the operating surgeon based on familiarity and perceived advantages of the 2 plates. Penetration of the distal locking screws in relation to the volar-dorsal thickness of the distal radial metaphysis was measured, and the percentage of subchondral bone unsupported by the screws calculated. RESULTS: The mean percentage of unsupported subchondral bone was significantly lower in the polyaxial than uniaxial volar locking plate group (12% vs. 23%, p<0.001). No patient had screw over-penetration. CONCLUSION: The polyaxial volar locking plate system enabled deeper insertion of distal screws into the subchondral bone, and thus providing better buttress for the fracture fragments.

Fibrous dysplasia, shepherd's crook deformity and an intra-capsular femoral neck fracture.

Fibrous dysplasia (FD) is a rare bone disorder in which normal medullary bone is replaced by fibro-osseous tissue. It typically presents in childhood with pain, skeletal deformities, gait abnormalities and occasionally, fatigue fractures. The management of FD remains a challenge. Surgical procedures have been developed to provide symptom relief, correct skeletal deformity and offer mechanical support in cases at risk of fracture. However, there is a paucity of data on the management of acute femoral neck fractures in the adult population with FD. We report the case of a 23-year-old man with a shepherd's crook deformity secondary to FD, who sustained an intra-capsular femoral neck fracture whilst playing football. The patient initially underwent closed reduction and internal fixation with cannulated screws. However, during the procedure, a guide wire broke whilst inside the femoral head. The patient was referred to the senior author, who undertook a second operation to remove the metalwork and correct the varus deformity using a closing-wedge femoral osteotomy, whilst achieving osteosynthesis at the fracture site. At 1-year follow-up, the patient is pain-free and demonstrates a full range of movement. These cases can be technically demanding and carry a greater risk of complication. It is important that preoperative planning is undertaken and surgery performed by individuals with experience in managing FD and complex femoral neck fractures. Correction of the skeletal deformity whilst fixing the fracture will help restore the mechanical axis and reduce the risk of a recurrent fracture.