Sleep, Caffeine, BMI, and Pressure Pain Threshold in Temporomandibular Disorder Patients: An Observational Study.

BACKGROUND: Temporomandibular disorders (TMDs) represent a multifactorial condition involving a multitude of symptoms of the temporomandibular joint that emanates a series of distress. Understanding the relationship between these lifestyle factors and pain perception in TMD patients is essential for optimizing their management and care. This study delves into the intricate interplay between sleep, caffeine consumption, body mass index (BMI), and the potential effect on pressure pain threshold (PPT) values among individuals with TMDs. MATERIALS AND METHODS: This is an observational study. Data were collected from a convenient sample of female patients at a single center in Riyadh city, between the ages of 20 and 50 years. The variables collected were based on an operator-designed questionnaire, the symptom questionnaire, and the Diagnostic Criteria for Temporomandibular Joint Disorders (DC/TMD). RESULTS: A total of 139 participants were included in the study, appraising the occurrence of TMD and pain as per reports of caffeine intake and sleep duration. The observed outcomes indicate that the amount of sleep has a significant effect on the PPT values in TMD patients. This study highlights the substantial impact of sleep duration on lowering PPT values in individuals with TMDs. The findings highlight the importance of considering sleep duration and caffeine intake in the comprehensive management of TMD patients. There was no effect of BMI on this particular sample. CONCLUSION: This study shows a positive correlation between sleep and pain and TMD, caffeine, and pain. A deeper understanding of these relationships could pave the way for more effective pain management strategies and personalized treatment approaches tailored to the unique needs of TMD patients. BMI had no effect.

The Relationship between Maxillary Sinus Volume and Different Cephalometric Characteristics in Orthodontics.

Introduction: This study aimed to evaluate the maxillary sinus volume (MSV) in both genders in a Saudi sample and among different skeletal patterns. Materials and Methods: This retrospective cross-sectional study included 52 cone-beam computed tomography (CBCT) scans of 18 years or older individuals with complete dentition and healthy medical history. MSV was measured as the mean value of both sides in cubic millimeters (mm3) using OnDemand three-dimensional™ Dental. Cephalometric tracings were conducted on cephalograms obtained from CBCT scans. The beta, A × B, and Frankfort-mandibular plane angles were selected to determine the sagittal and vertical skeletal patterns of the study subjects. Descriptive statistics and other tests were conducted. The significance level was set at P < 0.05. Results: Fifty-two CBCT scans were included in this study (23 males and 29 females), with a mean age of 36 (±14) years. The mean MSV was 14887 (±5030.79) mm3. Males had statistically significantly larger MSV (16517 ± 5335 mm3) compared with females (13595 ± 4,452 mm3) (P = 0.036). There was no statistically significant difference in MSV among all other cephalometric measurements (P > 0.05). Conclusions: The MSV in the studied Saudi sample was larger among males. However, different skeletal patterns have no statistically significant differences in MSV.

Multinational study on profile preference of laypersons.

BACKGROUND: This study aimed to assess the facial profile preferences of lay people in seven locations from different countries and whether their place of residence, sex, age, race, education, or income influenced the decision. METHODS: After altering the lip and nose in 1 mm increments in the sagittal and sagittal/vertical directions, 50 profile silhouettes with white-like facial features were rated by evaluators. The soft tissue values were integrated into the profiles, and profile preferences were identified for each location. An ANOVA with post hoc Tukey test was used to compare the differences in mean preference in each location. A multivariable regression model was used to assess the effect of the demographics of the evaluator on preference. RESULTS: Thirteen profiles were ultimately analyzed. The mean for profile preference was significantly different across locations (P < 0.0001). For evaluators in the United States and Lebanon, the most preferred profile had the original lip and original nose. In Switzerland and South Africa, retrusive lips, and a small and less upturned nose was most preferred. In Japan and Saudi Arabia, the most preferred profile had the original lip and a protrusive nose that was less upturned. A protrusive lip with a small, upturned nose was preferred in Turkey. Profile change (P < 0.0001), location (P < 0.0001), sex (P < 0.0001), and race (P = 0.02) were significant confounders; in contrast, age, education, and income were not significant. CONCLUSIONS: Profile preference is different among the seven locations. For the most part, lay people prefer profiles within one SD from white norms. Also, an upturned nose is the least favored in most of the locations. Sex and race are also significant confounders. CLINICAL RELEVANCE: An orthodontic treatment plan decision is affected by an individual's preference for their facial appearance. This study helps clinicians understand how racial and regional differences may affect patients' preferences and, therefore, their expectations for orthodontic treatment results.

Pulp volume changes after piezocision-assisted tooth movement: a randomized clinical trial.

BACKGROUND: Orthodontic treatment may result in undesirable side effects, such as root resorption and a decrease in the size of the pulp tissue which could be associated with the duration of the orthodontic treatment. Piezocision-assisted tooth movement was introduced as a minimally invasive surgical procedure to shorten orthodontic treatment time. This prospective randomized clinical trial was aimed to compare the pulp volume changes of maxillary anterior teeth after en-masse retraction with or without piezocision-assisted orthodontics. METHODS: Patients who required orthodontic treatment with bilateral maxillary first premolar extractions and en-masse retraction were recruited. Patients were randomly divided into extraction with piezocision, or only extraction, serving as controls. Pulp volume and root length changes of the maxillary six anterior teeth were measured and compared between the two groups using a 3-Dimensional analytical software. Paired and independent sample t-tests were used to compare within and between groups. Bivariate correlation was done between the mean change in pulp volume and its corresponding root length. The significance level was set at α = 0.05. RESULTS: A total of 23 patients were included, 12 in the piezocision, and 11 in the control group. At the end of the en-masse retraction phase, (mean = 122.74 ± 3.06 days) pulp volume was significantly decreased in all six anterior teeth in both groups (P < 0.01). The decrease in pulp volume was not statistically different between both groups, (P > 0.05). There was a statistically significant but moderate correlation only between the pulp volume change of the right canine and its root length, r = 0.44, P = 0.034. CONCLUSIONS: The effect of piezocision-assisted orthodontic tooth movement on the pulp volume was comparable to the conventional orthodontic treatment. The degree of change in pulp volume does not appear to be related to the amount of root resorption. Trial registration NCT03180151. Registered December 25, 2016, retrospectively registered, https://clinicaltrials.gov/ct2/show/record/NCT03180151 .

Effect of piezocision corticotomy on en-masse retraction.

OBJECTIVES: To compare the amount of en-masse retraction with or without piezocision corticotomy, to assess the type of tooth movement, to evaluate root integrity after retraction, and to record reported pain levels. MATERIALS AND METHODS: This randomized, controlled clinical trial included 26 orthodontic patients requiring premolar extraction. The patients were divided into two groups: (1) an extraction with piezocision corticotomy group (PCG) and (2) an extraction-only group, which served as the control group (CG). Cone-beam computed tomography images were acquired before and 4 months after the initiation of en-masse retraction utilizing miniscrews. The following variables were assessed: the amount of en-masse retraction, incisor inclination, incisor and canine root resorption, and patient-reported pain. RESULTS: Twelve and 11 participants completed the entire study in the PCG and CG, respectively. The amount of en-masse retraction was significantly greater in the PCG compared to the CG (mean = 4.8 ± 0.57 mm vs 2.4 ± 0.33 mm, respectively [P < .001]). There was also significantly less tipping and root resorption of incisors in the PCG (P < .05). The reported pain was significantly higher on the first day in the PCG compared to the CG (P < .001); however, it became similar between the groups after 24 hours. CONCLUSIONS: Piezocision corticotomy enhanced the amount of en-masse retraction two times more with less root resorption. However, future studies are required to assess the long-term effects of this technique.

Anatomical consideration for optimal position of orthodontic miniscrews in the maxilla: a CBCT appraisal.

BACKGROUND: Orthodontic miniscrews are commonly used as temporary anchorage devices. Bone thickness and bone depth are important factors when placing miniscrews. There are no studies to assess the maxillary bone thickness for optimum miniscrew placement in a Saudi population. OBJECTIVE: Assess the proximity of the maxillary sinus and nasal cavity in areas where miniscrews are usually inserted using cone beam computed tomography (CBCT). DESIGN: Retrospective, cross-sectional. SETTING: Department of maxillofacial radiology in a Saudi dental school. PATIENTS AND METHODS: Using CBCT images, we measured the distance between the maxillary sinus and nasal cavity to the palatal bone, buccal intra-radicular and infrazygomatic crest areas. Mean values (SD) were compared at various locations, including by gender, and correlation with age was calculated. MAIN OUTCOME MEASURE: Mean bone thickness at commonly used sites for orthodontic miniscrew placements in the maxilla. Secondary outcome was the insertion angle in the infrazygomatic crest area. SAMPLE SIZE: CBCT images of 100 patients (50 males and 50 females). RESULTS: The mean (standard deviation) age for the sample was 25.4 (6.5) years with no significant difference between males and females. In the palate, the distance to the nasal cavity and maxillary sinus was greater anteriorly and decreased significantly posteriorly (P<.001). Buccally, the interdental bone depth was significantly greater between the second premolar and first molar (11.96 mm) compared to between the central and lateral incisors (7.53 mm, P<.001). The mean bone thickness of the infrazygomatic crest area at a 45° insertion angle was 4.94 mm compared to 3.90 at a 70° insertion angle (P<.001). No correlation was found between age and bone thickness. CONCLUSION: The distance to the nasal cavity and maxillary sinus was greater in the anterior than posterior areas. There is minimal risk of injuring the maxillary sinus or nasal cavity using the buccal approach. Caution is needed when placing miniscrews in the infrazygomatic crest area. LIMITATIONS: Cross-sectional study from one center; hence, findings cannot be generalized to other populations. CONFLICT OF INTEREST: None.