Effect of Dentin Contamination with Hemostatic Agents and Cleaning Techniques on Bonding with Self-Adhesive Resin Cement.

BACKGROUND Dentin contamination with hemostatic agents before bonding indirect restorations negatively affects the bond strength. However, the consensus on which materials could be used to clean contamination of hemostatic agents has not been explored. The aim of this study was to assess the effect of Katana Cleaner applied on the surface of dentin contaminated with hemostatic agents on the shear bond strength (SBS) of self-adhesive resin cement by comparing it with three other surface cleaners. MATERIAL AND METHODS Ninety dentin specimens were divided into a no contamination group (control) (n=10), 4 groups contaminated with 25% aluminum chloride (Viscostat Clear) (n=40), and 4 groups contaminated with 20% ferric sulfate (Viscostat) (n=40). Subsequently, 4 different cleaners were used for each contamination group (water rinse, phosphoric acid, chlorhexidine, and Katana Cleaner). Then, self-adhesive resin cement was directly bonded to the treated surfaces. All specimens were subjected to 5000 thermal cycles of artificial aging. The shear bond strength was measured using a universal testing machine. RESULTS Two-way analysis of variance showed that the contaminant type as the main factor was statistically non-significant (p=0.655), cleaner type as the main factor was highly significant (p<0.001), and interaction between the contaminant and cleaner was non-significant (p=0.51). The cleaner type was the main factor influencing the bond strength. Phosphoric acid and chlorhexidine showed better performance than Katana Cleaner. CONCLUSIONS Cleaning dentin surface contamination with phosphoric acid and chlorhexidine had better performance than with Katana Cleaner.

Orthodontic treatment in adults: Challenges, outcomes, and factors affecting compliance and satisfaction.

BACKGROUND: The demand for orthodontic treatment among adults has witnessed a substantial rise in recent years. This study aims to explore the complexities of adult orthodontics, focusing on challenges faced, treatment outcomes, and the influence of factors such as age, gender, and education on patient compliance and satisfaction. METHODS: A multi-dimensional approach was employed, combining a review of clinical records with structured patient surveys. Descriptive statistics summarized demographic characteristics, treatment duration, and orthodontic problems addressed. Inferential statistics included Pearson correlation, Chi-squared tests, and analysis of variance to examine age compliance, gendersatisfaction, and education-orthodontic problem relationships. Qualitative analysis enriched findings, and statistical software facilitated data processing. RESULTS: The analysis revealed a statistically significant negative correlation between age and compliance (r = -0.28, P < 0.05), indicating that younger participants demonstrated higher compliance rates. Gender emerged as a significant factor influencing patient satisfaction (P = 0.024), with females reporting notably higher levels of satisfaction than males. Furthermore, participants with advanced education levels (Master's/Ph.D.) were significantly more likely to have orthodontic issues related to malocclusion (P = 0.041). CONCLUSION: The study provides an insight into the multi-dimensional aspects of adult orthodontics, recognizing the challenges, compliance, and satisfaction levels. Tailored approaches considering age, gender, and education are essential. This research contributes to a deeper understanding of orthodontic treatment in adults and its potential implications for enhanced patient care.

Capsaicin ameliorate pulmonary fibrosis via antioxidant Nrf-2/ PPAR- γ pathway activation and inflammatory TGF-ß1/ NF-κB/COX II pathway inhibition.

Bleomycin is an effective antibiotic with a significant anticancer properties, but its use is limited due to its potential to induce dose-dependent pulmonary fibrosis. Therefore, this study aimed to assess the therapeutic potential of Capsaicin as an additional treatment to enhance patient tolerance to Bleomycin compared to the antifibrotic drug Pirfenidone. Pulmonary fibrosis was induced in rats through by a single intratracheal Bleomycin administration in day zero, followed by either Capsaicin or Pirfenidone treatment for 7 days. After the animals were sacrificed, their lungs were dissected and examined using various stains for macroscopic and histopathological evaluation. Additionally, the study assessed various antioxidant, anti-inflammatory, and antifibrotic parameters were assessed. Rats exposed to Bleomycin exhibited visible signs of fibrosis, histopathological alterations, increased collagen deposition, and elevated mucin content. Bleomycin also led to heightened increased inflammatory cells infiltration in the bronchoalveolar lavage, elevated fibrosis biomarkers such as hydroxyproline, alpha-smooth muscle actin (α-SMA) and transforming growth factor-beta (TGF-ß1), increased inflammatory markers including tumor necrosis factor-alpha (TNF-α), interlukine-6 (Il-6), interlukine-1ß (Il-1ß) nuclear factor-kappa B (NF-κB), and Cyclooxygenase-2 (COX-2), and transforming growth factor-beta (TGF-ß1),. Furthermore, it reduced the expression of peroxisome proliferator-activated receptor-gamma (PPAR-γ), increased oxidative stress biomarkers like nitric oxide (NO), malondialdehyde (MDA), myeloperoxidase (MPO) and protein carbonyl. Bleomycin also decreased the expression of nuclear factor erythroid 2-related factor 2 (Nrf-2), reduced glutathione (GSH), total antioxidant capacity, and the activities of catalase and superoxide dismutase (SOD). Treating the animals with Capsaicin and Pirfenidone following Bleomycin exposure resulted in improved lung macroscopic and microscopic characteristics, reduced collagen deposition (collagen I and collagen III) and mucin content, decreased inflammatory cell infiltration, lowered levels of hydroxyproline, α-SMA, and TGF-ß1, decreased TNF-α, Il-6, Il-1ß, NF-κB, and COX-2, increased PPAR-γ and Nrf-2 expression, and improvement improved in all oxidative stress biomarkers. In summary, Capsaicin demonstrates significant antifibrotic activity against Bleomycin-induced lung injury that may be attributed, at least in part, to the antioxidant and anti-inflammatory activities of Capsaicin mediated by upregulation of PPAR-γ and Nrf-2 expression and decreasing. TGF-ß1, NF-κB and COX II proteins concentrations.

Health-risk behaviours co-occur among adults with tooth loss.

INTRODUCTION: Health-risk behaviours tend to co-occur among the same sectors of the population. The aim of this study is to examine the association between an aggregate of multiple health-risk behaviours and tooth loss among American Adults. METHODS: We used data from the Behavioural Risk Factor Surveillance System (BRFSS) 2022, a nationally representative survey of non-institutionalized American. We included participants aged 18 years and older. An aggregate variable of health-risk behaviours which included smoking, heavy alcohol consumption, lack of physical activities, overweight/obesity, infrequent dental visits and infrequent medical check-up was created. Tooth loss was indicated by losing one tooth or more. Logistic Regression analysis was conducted to test the association between the aggregate of behaviours and tooth loss adjusting for income, education, ethnicity and health insurance. RESULTS: The analysis included 326,561 participants. The mean number of health-risk behaviours was 2.13 and 1.72 among participants with tooth loss and without tooth loss, respectively. The aggregate of health-risk behaviours was significantly associated with tooth loss with odds ratios 1.23 (95% CI, 1.21, 1.26) in a model adjusting for age, gender, education, income ethnicity and health insurance. CONCLUSION: This study demonstrated that an aggregate of health-risk behaviours, with some not directly linked to oral health, is associated with tooth loss among American adults. The study highlights the importance of considering different risk factors when planning health promotion policies to tackle oral health.

Stroke and high-risk TIA outcomes with reduction of treatment duration when treatment initiated in emergency rooms (SHORTER-study).

BACKGROUND: Following transient ischemic attack (TIA) and minor stroke, the risk of recurrent stroke can be significantly reduced with short-duration dual antiplatelet therapy (DAPT). We wish to investigate whether 10 days of DAPT is as effective as 21 days' treatment. STUDY DESIGN: This is an open-label, randomized, parallel-group study comparing whether 10 days of DAPT treatment (ASA + clopidogrel) is non-inferior to 21 days of DAPT in patients with acute ischemic stroke (AIS) or high-risk TIA. In both groups, DAPT is started within 24 hours of symptom onset. This study is being conducted in approximately 15 study sites in the Kingdom of Saudi Arabia. The planned sample size is 1932. OUTCOMES: Non-inferiority of 10 days compared to 21 days of DAPT in the prevention of the composite endpoint of stroke and death at 90 days in AIS/TIA patients. The primary safety outcome is major intra-cranial and systemic hemorrhage. STUDY PERIOD: Enrolment started in the second quarter of 2023, and the completion of the study is expected in the fourth quarter of 2025. DISCUSSION: The trial is expected to show that 10 days of DAPT is non-inferior for the prevention of early recurrence of vascular events in patients with high-risk TIAs and minor strokes.

Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering.

BACKGROUND: Various methods can be used for creating zirconia dental restorations, including 3-dimensional (3D) printing and computer-aided design/ computer-aided manufacturing (CAD/CAM) milling. The fused deposition modeling (FDM) printing method for zirconia presents numerous advantages, albeit research on the mechanical properties of these materials and resultant restorations remains scarce. Such developments are undeniably intriguing and warrant further investigation. The objective of the present study was to evaluate the impact of the sintering firing cycle (Conventional vs. Speed sintering) on the flexural strength, flexural modulus, and Vickers Microhardness of milled vs. FDM printed zirconia. METHODS: A total of 60 bars (2 × 5 × 27 mm) were fabricated for flexural strength testing, along with 40 discs (12 × 1.5 mm) for Vickers microhardness testing. Half of the specimens underwent conventional sintering, while the other half underwent a speed sintering cycle. The flexural strength and modulus were determined by a three-point bending test in a universal testing machine. The microhardness of the specimens was evaluated using a Vickers microhardness tester. Statistical analysis was performed using a two-way ANOVA test with a post-hoc Tukey test (p < 0.05). RESULTS: CAD/CAM milled zirconia had significantly higher flexural strength and modulus than FDM-printed zirconia. The sintering process did not significantly affect the flexural strength or modulus of milled or FDM-printed zirconia. The milled speed sintering group had significantly higher values in the Vickers microhardness test compared to the other groups. CONCLUSIONS: The mechanical properties of FDM-printed zirconia specimens were not found to be comparable to those of milled zirconia. Speed sintering cycle may produce milled zirconia restorations with similar flexural strength and modulus to conventional sintering, and even higher Vickers Microhardness values.

A rare diagnosis: Acute bilateral vasitis mimicking incarcerated bilateral inguinal hernia.

Inflammation of the vas deferens or what known as acute vasitis is an under-reported condition that usually presents with scrotal or inguinal pain and swelling which can be misdiagnosed and treated as many other conditions. Here, we present one of the first cases to be reported in the literature with bilateral manifestation. A 28-year-old male patient presented complaining of bilateral testicular and inguinal pain associated with inguinal swelling for 3 days. Initially, the patient was being evaluated as a case of incarcerated bilateral inguinal hernia, but with the aid of radiological imaging, the patient was diagnosed correctly and the unnecessary surgical intervention was prevented.

Incidence and risk factors of contrast-induced nephropathy in acute stroke patients undergoing computed tomography angiography: A single-center study.

OBJECTIVES: To investigate the prevalence and risk factors linked to contrast-induced nephropathy in this specific patient population, aiming to ensure the highest quality of clinical care. METHODS: In a retrospective analysis, all patients who presented with an acute stroke to King Fahad Hospital, Jeddah, Emergency Department from March until November 2022 and underwent Computed Tomography Angiography (CTA) brain, Inclusion criteria were as follows: a baseline creatinine results and CTA examination performed within 24 hours of symptom onset and an available early (<5 days after CTA) follow-up creatinine result. RESULTS: Among 246 stroke patients in the emergency, 182 underwent brain CTA and 8.24% had Contrast-Induced Nephropathy (CIN). intracerebral hemorrhage (ICH) increased CIN risk 7-fold (OR=6.7; 95% CI: 1.23-33.3). Abnormal baseline raised CIN risk 8-fold (OR=7.8; 95% CI: 1.74-35.1). hypertension doubled the risk for CIN (OR=2.1; 95% CI: 1.26-6.98) CONCLUSION: The incidence of CIN was 8.2%, particularly elevated in patients with ICH, hypertension, tissue plasminogen administration, and abnormal baseline, necessitating vigilance in managing acute stroke cases.

An Unusual Cause of Recurrent Visible Hematuria; Posterior Urethral Hemangioma: A Case Report and Review of Literature.

Urinary tract hemangiomas are uncommon entity to urologists, despite their benign nature and course; they can cause significant patient's hemodynamic instability or distress if not recognized and managed properly. Here, we present a case of urethral hemangioma with its treatment, follow-up course and review of literature of similar cases. Introduction: Bloody urine or urethral bleeding can be the initial presentation of a number of different medical and surgical conditions, some of which are benign and others are malignant, when encountered, they are alarming and must be evaluated thoroughly. As a cause, urethral hematomas are faced rarely, among all urinary tract sites; they are the second least common(1). Due to their paucity in clinical practice, there is no agreed approach on their management and each case has to be individualized. In the literature, different assessment and treatment methods were tried with satisfactory outcomes in each one. Here we report a case with detailed, concise explanation of such pathology and a comprehensive comparison in light of previous literature. Keywords: Urethral hemangioma, urethral bleeding, benign urinary tract tumors.

Effect of Repressing Lithium Disilicate Glass Ceramics on The Shear Bond Strength of Resin Cements.

The aim of this study was to investigate the effect of repeated pressing of lithium disilicate ceramic on the shear bond strength (SBS) of three types of resin cement. METHODOLOGY: A lithium disilicate ceramic (IPS e.max® Press) was first heat-pressed to form rectangular disk specimens. Then, leftovers were used for the second and third presses. A total of 90 specimens were prepared and separated, according to the number of pressing cycles, into three groups: 1st, 2nd, and 3rd presses (n = 30). Each group was further subdivided into three groups (n = 10) according to the type of resin cement used, as follows: Multilink N (MN), Variolink Esthetic DC (VDC), and Variolink Esthetic LC (VLC). All the cement was bonded to the ceramic surface, which was etched with hydrofluoric acid and primed with Monobond Plus. All samples were light-cured and stored for 24 h. Shear bond strength was tested on a universal testing machine. RESULTS: A two-way ANOVA was used to evaluate the influence of repeated pressing cycles and cement type as well as their interaction. The results indicated that cement type has a significant impact (p < 0.001) but not the number of pressing cycles (p = 0.970) or their interaction (p = 0.836). The Bonferroni post-hoc test showed that the SBS of MN was significantly higher than that of VDC and VLC in the first press and second press cycles, respectively. The SBS of MN was significantly higher than that of VDC and VLC cements in the third pressing cycle. There was no significant difference in the SBS between VLC and VDC in all three pressing cycles. CONCLUSION: The results of the current study did not report a detrimental effect of repeated pressing up to three cycles on the shear bond strength of the IPS e.max® Press. Multilink resin cement showed the highest SBS to IPS e.max® Press at the third pressing cycle. For all types of cement and heat pressing cycles, the majority of cement failures were adhesive. No cohesive failures occurred in any of the tested resin cements, regardless of the cement type or the number of heat pressing cycles tested.

Sustainable Resource Allocation and Reduce Latency Based on Federated-Learning-Enabled Digital Twin in IoT Devices.

In this article, we utilize Digital Twins (DT) with edge networks using blockchain technology for reliable real-time data processing and provide a secure, scalable solution to bridge the gap between physical edge networks and digital systems. Then, we suggest a Federated Learning (FL) framework for collaborative computing that runs on a blockchain and is powered by the DT edge network. This framework increases data privacy while enhancing system security and reliability. The provision of sustainable Resource Allocation (RA) and ensure real-time data-processing interaction between Internet of Things (IoT) devices and edge servers depends on a balance between system latency and Energy Consumption (EC) based on the proposed DT-empowered Deep Reinforcement Learning (Deep-RL) agent. The Deep-RL agent evaluates the performance action based on RA actions in DT to distribute its bandwidth resources to IoT devices based on iteration and the actions taken to generate the best policy and enhance learning efficiency at every step. The simulation results show that the proposed Deep-RL-agent-based DT is able to exploit the best policy, select 47.5% of computing activities that are to be carried out locally with 1 MHz bandwidth and minimize the weighted cost of the transmission policy of edge-computing strategies.

Regional Myopericarditis Mimicking Inferior Myocardial Infarction Following COVID-19 Vaccination: A Rare Adverse Event.

We present the case of a 41-year-old man who developed myopericarditis after receiving the Pfizer COVID-19 vaccine. The patient experienced a sudden onset of chest and abdominal pain 16 days after vaccination. Electrocardiogram findings revealed deep T-wave inversion and minimal ST-segment elevation. Further investigation through coronary artery angiography and computed tomography identified an anomalous left main coronary artery. Magnetic resonance imaging confirmed the diagnosis of myopericarditis. This case highlights the importance of considering myopericarditis as a potential cause of chest pain and elevated cardiac biomarkers following COVID-19 vaccination, particularly in young individuals. Clinicians should be aware of this adverse event and include it in the differential diagnosis for patients presenting with similar symptoms after vaccination.

Hand Knob Syndrome Secondary to Ipsilateral Concomitant Carotid Fibromuscular Dysplasia and Proximal Atherosclerotic Disease.

One of the uncommon stroke presentations is the isolated wrist drop syndrome, caused by a stroke affecting the hand knob area, with the embolic mechanism being the most commonly identified mechanism. Here, we present the case of a 62-year-old female patient who presented with acute-onset isolated wrist drop secondary to right internal carotid artery fibromuscular dysplasia with a string of beads appearance and coexisting proximal atherosclerotic severe stenosis. The patient underwent successful carotid artery stenting. Patients with hand knob stroke may present a diagnostic dilemma and can be misdiagnosed as having peripheral neuropathy due to the absence of pyramidal signs and other symptoms of cortical involvement, leading to delayed or inappropriate treatment.

Risk Factors for Mortality in Patients With Cerebral Palsy: A Systematic Review and Meta-Analysis.

Cerebral palsy (CP) is a developmental and physical disorder with different degrees of severity. Since CP manifests itself in early childhood, numerous research studies have concentrated on children with CP. Patients with CP encounter different severity of motor impairments attributed to the damage or disturbance to the fetal or infant developing brain, which begins in early childhood and persists through adulthood. Patients with CP are more prone to mortality compared to the general population. This systematic review and meta-analysis aimed to assess the risk factors that predict and influence mortality in patients with CP. Systematic search for studies assessing the risk factors for mortality in CP patients that were conducted from 2000 to 2023 in Google Scholar, PubMed, and Cochrane Library was performed. R-One Group Proportion was used for statistical analysis and Newcastle-Ottawa Quality Assessment Scale (NOS) for quality appraisal. Of the 1791 total database searches, nine studies were included. Based on the NOS tool for quality appraisal, seven studies were of moderate quality, and two studies were rated as of high quality. The risk factors included pneumonia and other respiratory infections, neurological disorders, circulatory diseases, gastrointestinal infections, and accidents. Pneumonia (OR = 0.40, 95% CI = 0.31 - 0.51), neurological disorders (OR = 0.11, 95% CI = 0.08 - 0.16), respiratory infections (OR = 0.36, 95% CI = 0.31 - 0.51), cardiovascular and circulatory diseases (OR = 0.11, 95% CI = 0.04 - 0.27), gastrointestinal and metabolic causes (OR = 0.12, 95% CI = 0.06 - 0.22), and accidents (OR = 0.05, 95% CI = 0.04 - 0.07) were the risk factors assessed. It was concluded that multiple factors predict the risk of mortality in patients with CP. Pneumonia and other respiratory infections are associated with a high risk of mortality. Cardiovascular and circulatory diseases, gastrointestinal and metabolic disorders, and accidents are strongly linked to mortality in CP patients.

Mechanical Properties of Three-Dimensional Printed Provisional Resin Materials for Crown and Fixed Dental Prosthesis: A Systematic Review.

The emergence of digital dentistry has led to the introduction of various three-dimensional (3D) printing materials in the market, specifically for provisional fixed restoration. This study aimed to undertake a systematic review of the published literature on the Mechanical Properties of 3D- Printed Provisional Resin Materials for crown and fixed dental prosthesis (FDP). The electronic database on PubMed/Medline was searched for relevant studies. The search retrieved articles that were published from January 2011 to March 2023. The established focus question was: "Do provisional 3D-printed materials have better mechanical properties than conventional or milled provisional materials?". The systematically extracted data included the researcher's name(s), publication year, evaluation method, number of samples, types of materials, and study outcome. A total of 19 studies were included in this systematic review. These studies examined different aspects of the mechanical properties of 3D-printed provisional materials. Flexural Strength and Microhardness were the frequently used mechanical testing. Furthermore, 3D-printed provisional restorations showed higher hardness, smoother surfaces, less wear volume loss, and higher wear resistance compared to either milled or conventional, or both. 3D-printed provisional resin materials appear to be a promising option for fabricating provisional crowns and FDPs.

Reversible CT Scan Hypodensity in Acute Ischemic Stroke Patient With Low Initial Alberta Stroke Program Early CT Score (ASPECTS) Following Endovascular Thrombectomy: A Case Report.

According to current American and European guidelines, mechanical thrombectomy is recommended only for patients with an Alberta Stroke Program Early CT Score (ASPECTS) of 6 or higher. However, recent literature suggests that the potential benefits of reperfusion therapy should not be solely determined by baseline ASPECTS. In this case report, we present a young female patient with a low initial ASPECTS (4-5), who underwent mechanical thrombectomy and showed marked improvement in both CT imaging and clinical symptoms. Our findings potentially show that mechanical thrombectomy may be beneficial even for patients with an initial ASPECTS ≤ 5. These results may contribute to the growing evidence supporting the use of mechanical thrombectomy as a viable treatment option for acute ischemic stroke patients with low baseline ASPECTS.

Behavioral Changes in Patients With Diabetes During the COVID-19 Pandemic in Saudi Arabia: A Cross-Sectional Study.

On March 2, 2020, the first case of coronavirus disease 2019 (COVID-19) was dedicated in Saudi Arabia. The government established partial quarantine, and all precautions were mandatory on March 23, 2020. This in turn forced people to spend more time at home, leading to changes in the physical activity and dietary habits of individuals. In this study, we aimed to assess the behavioral changes of Saudi diabetic individuals during the COVID-19 pandemic and measure the effectiveness of the behavioral changes of Saudi diabetic individuals during the COVID-19 pandemic on the control of the glucose level. A cross-sectional study was conducted through an online questionnaire sent to diabetic patients in Riyadh, Saudi Arabia. Participants ranging from 18 years old and above of both genders were selected. Diabetic patients (type 1 and 2) were included. All collected data for this study were analyzed using Stata 17 (StataCorp LLC, College Station, Texas, USA). A total of 223 people responded. For 45% of individuals, doctor visits significantly decreased (p<0.05), and the percentage of doctor visits also decreased for individuals who previously visited their doctor more regularly. Furthermore, the number of hours spent on tablets increased significantly during COVID-19 (p<0.05). Our findings demonstrate that there are no significant changes in lifestyle factors or glycemic control during the pandemic compared with the pre-pandemic year in individuals with diabetes. However, the rate of patient visits to the doctor was lower than pre-pandemic, with an increase in the rate of physical activity.

Colorectal Cancer in Saudi Arabia: The Way Forward.

Colorectal cancer is the most common cancer in Saudi males and the second most common cancer in Saudi females with increasing incidence throughout the last four decades. Although the disease incidence is on the rise, still there is no systemic screening for colorectal cancer in the Saudi population. Early onset colorectal cancer is common in the Saudi population and up to 50% in Saudi patients diagnosed at late stages with regional and distal metastasis. Therefore, more efforts are required to control the disease in the Kingdom of Saudi Arabia. In this regard,  systematic work at national level is highly required to make  colorectal cancer screening for population at risk part of the routine primary health care activities. This paper highlights the current situation of colorectal cancer in the Kingdom of Saudi Arabia with relation to incidence, mortality and morbidity in addition to the disease control efforts going on. Finally, some recommendations are provided to strengthen the control program of colorectal cancer.

Awareness of Gestational Diabetes Mellitus Among Women in the Al-Baha Region, Saudi Arabia.

Background Gestational diabetes mellitus (GDM) is a condition characterized by impaired glucose tolerance that develops during pregnancy. The prevalence of GDM is increasing globally, including in the Al-Baha region of Saudi Arabia. However, there needs to be more data on the awareness of women in this region regarding GDM and its associated risks. This research aimed to evaluate the level of awareness among women in the Al-Baha region regarding GDM. Methodology This study followed an observational cross-sectional design conducted from April 2023 to December 2023. A simple random sampling technique was used to select 457 participants from the resident women of reproductive age in the Al-Baha region. Data were collected through a self-administered questionnaire that assessed knowledge and awareness of GDM risk factors, assessment, therapy, and implications. The questionnaire included a 12-item section evaluating GDM awareness, with correct answers receiving a score of 1. Descriptive statistics were used to analyze the data with Statistical Product and Service Solutions (SPSS, version 28) (IBM SPSS Statistics for Windows, Armonk, NY). Results The majority of participants fell into the age group of more than 36 years (n=207, 45.3%), with a significant proportion having completed university/diploma education (n=282, 61.7%), and most of them worked outside the health sector (n=283, 61.9%). Approximately 27.8% correctly identified that the number of pregnancies does not increase the chance of developing GDM. Only (n=48, 10.5%) accurately identified the usual time for diagnosing GDM in the absence of risk factors, which is between weeks 24 and 28 of pregnancy. Similarly, 26.0% (119 participants) correctly recognized a history of a previous pregnancy with a child weighing more than 4.5 kg as a factor that increases the suspicion of developing GDM in the future. However, it is important to note that the majority of participants (n=311, 68.1%) had a poor level of awareness regarding GDM. Conclusion The findings revealed that the overall level of knowledge about GDM was poor, with less than 10% of participants demonstrating adequate awareness. The study also highlighted that over 80% of the participants were unaware of GDM.

Quality of Clinical Counseling About Lifestyle-Related Diseases: An Analysis of Daily Practice From the National Guard Primary Health Care Center at Jeddah, Saudi Arabia.

BACKGROUND:  Unhealthy lifestyle behaviors are the main reason for the worldwide epidemic of chronic diseases. Changes in lifestyle, such as physical activity, healthy diet, and non-smoking, require preventive strategies at the national and individual levels. Clinical counseling is one of these strategies which helps patients to be motivated and enhance their self-management. The present study aimed to improve clinical counseling practice at the National Guard Primary Health Care Center, Jeddah, Saudi Arabia. Objective:To assess the quality of counseling from the patient's perspective in the primary care center of the National Guard (specialized polyclinic center) using a modified counseling quality instrument (CQI). Subjects and methods: In a cross-sectional study and through a convenient sampling technique from the patients visiting the National Guard Primary Health Care Center (specialized polyclinic center), 358 patients completed a self-administered questionnaire regarding their experiences of clinical counseling. The Kruskal-Wallis test was used to record the statistically significant differences between the ordinal variable of participants' quality scores and their demographic characteristics. RESULTS:  The mean age of participants was 35± 8 years, ranging between 22 to 69 years. Most of the participating patients were women (63%). Slightly more than half the patients obtained clinical counseling during their appointments, and physicians at the clinic gave 57% of these clinical counseling sessions. The patients were generally satisfied with the counseling. They rated the counseling sessions as good in terms of content, the process of counseling, the way of interaction, and the degree of goal-oriented discussion. In addition to receiving counseling from physicians, older participants and those with postgraduate education were found to significantly positively affect patient perceptions of counseling quality. CONCLUSION: This study found that half of the participants did not get clinical counseling during their visits, indicating no standardization in clinical counseling services for all patients. Although patients were generally satisfied with the counseling session provided to them, time constraint was the highest dissatisfaction item among two-thirds of the patients in the present study.